BuiltinTuner.md

# Built-in Tuners

NNI provides state-of-the-art tuning algorithm as our built-in tuners and makes them easy to use. Below is the brief summary of NNI currently built-in tuners:

Note: Click the **Tuner's name** to get the Tuner's installation requirements, suggested scenario and using example. The link for a detailed description of the algorithm is at the end of the suggested scenario of each tuner. Here is an [article](../CommunitySharings/HpoComparision.md) about the comparison of different Tuners on several problems.

Currently we support the following algorithms:

|Tuner|Brief Introduction of Algorithm|
|---|---|
|[__TPE__](#TPE)|The Tree-structured Parzen Estimator (TPE) is a sequential model-based optimization (SMBO) approach. SMBO methods sequentially construct models to approximate the performance of hyperparameters based on historical measurements, and then subsequently choose new hyperparameters to test based on this model. [Reference Paper](https://papers.nips.cc/paper/4443-algorithms-for-hyper-parameter-optimization.pdf)|
|[__Random Search__](#Random)|In Random Search for Hyper-Parameter Optimization show that Random Search might be surprisingly simple and effective. We suggest that we could use Random Search as the baseline when we have no knowledge about the prior distribution of hyper-parameters. [Reference Paper](http://www.jmlr.org/papers/volume13/bergstra12a/bergstra12a.pdf)|
|[__Anneal__](#Anneal)|This simple annealing algorithm begins by sampling from the prior, but tends over time to sample from points closer and closer to the best ones observed. This algorithm is a simple variation on the random search that leverages smoothness in the response surface. The annealing rate is not adaptive.|
|[__Naïve Evolution__](#Evolution)|Naïve Evolution comes from Large-Scale Evolution of Image Classifiers. It randomly initializes a population-based on search space. For each generation, it chooses better ones and does some mutation (e.g., change a hyperparameter, add/remove one layer) on them to get the next generation. Naïve Evolution requires many trials to works, but it's very simple and easy to expand new features. [Reference paper](https://arxiv.org/pdf/1703.01041.pdf)|
|[__SMAC__](#SMAC)|SMAC is based on Sequential Model-Based Optimization (SMBO). It adapts the most prominent previously used model class (Gaussian stochastic process models) and introduces the model class of random forests to SMBO, in order to handle categorical parameters. The SMAC supported by NNI is a wrapper on the SMAC3 GitHub repo. Notice, SMAC need to be installed by `nnictl package` command. [Reference Paper,](https://www.cs.ubc.ca/~hutter/papers/10-TR-SMAC.pdf) [GitHub Repo](https://github.com/automl/SMAC3)|
|[__Batch tuner__](#Batch)|Batch tuner allows users to simply provide several configurations (i.e., choices of hyper-parameters) for their trial code. After finishing all the configurations, the experiment is done. Batch tuner only supports the type choice in search space spec.|
|[__Grid Search__](#GridSearch)|Grid Search performs an exhaustive searching through a manually specified subset of the hyperparameter space defined in the searchspace file. Note that the only acceptable types of search space are choice, quniform, randint. |
|[__Hyperband__](#Hyperband)|Hyperband tries to use the limited resource to explore as many configurations as possible, and finds out the promising ones to get the final result. The basic idea is generating many configurations and to run them for the small number of trial budget to find out promising one, then further training those promising ones to select several more promising one.[Reference Paper](https://arxiv.org/pdf/1603.06560.pdf)|
|[__Network Morphism__](#NetworkMorphism)|Network Morphism provides functions to automatically search for architecture of deep learning models. Every child network inherits the knowledge from its parent network and morphs into diverse types of networks, including changes of depth, width, and skip-connection. Next, it estimates the value of a child network using the historic architecture and metric pairs. Then it selects the most promising one to train. [Reference Paper](https://arxiv.org/abs/1806.10282)|
|[__Metis Tuner__](#MetisTuner)|Metis offers the following benefits when it comes to tuning parameters: While most tools only predict the optimal configuration, Metis gives you two outputs: (a) current prediction of optimal configuration, and (b) suggestion for the next trial. No more guesswork. While most tools assume training datasets do not have noisy data, Metis actually tells you if you need to re-sample a particular hyper-parameter. [Reference Paper](https://www.microsoft.com/en-us/research/publication/metis-robustly-tuning-tail-latencies-cloud-systems/)|
|[__BOHB__](#BOHB)|BOHB is a follow-up work of Hyperband. It targets the weakness of Hyperband that new configurations are generated randomly without leveraging finished trials. For the name BOHB, HB means Hyperband, BO means Bayesian Optimization. BOHB leverages finished trials by building multiple TPE models, a proportion of new configurations are generated through these models. [Reference Paper](https://arxiv.org/abs/1807.01774)|
|[__GP Tuner__](#GPTuner)|Gaussian Process Tuner is a sequential model-based optimization (SMBO) approach with Gaussian Process as the surrogate. [Reference Paper](https://papers.nips.cc/paper/4443-algorithms-for-hyper-parameter-optimization.pdf), [Github Repo](https://github.com/fmfn/BayesianOptimization)|

## Usage of Built-in Tuners

Use built-in tuner provided by NNI SDK requires to declare the  **builtinTunerName** and **classArgs** in `config.yml` file. In this part, we will introduce the detailed usage about the suggested scenarios, classArg requirements and example for each tuner.

Note: Please follow the format when you write your `config.yml` file. Some built-in tuner need to be installed by `nnictl package`, like SMAC.

<a name="TPE"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `TPE`

> Built-in Tuner Name: **TPE**

**Suggested scenario**

TPE, as a black-box optimization, can be used in various scenarios and shows good performance in general. Especially when you have limited computation resource and can only try a small number of trials. From a large amount of experiments, we could found that TPE is far better than Random Search. [Detailed Description](./HyperoptTuner.md)


**Requirement of classArg**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.

Note: We have optimized the parallelism of TPE for large-scale trial-concurrency. For the principle of optimization or turn-on optimization, please refer to [TPE document](HyperoptTuner.md).

**Usage example:**

```yaml
# config.yml
tuner:
  builtinTunerName: TPE
  classArgs:
    optimize_mode: maximize
```

<br>

<a name="Random"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Random Search`

> Built-in Tuner Name: **Random**

**Suggested scenario**

Random search is suggested when each trial does not take too long (e.g., each trial can be completed very soon, or early stopped by assessor quickly), and you have enough computation resource. Or you want to uniformly explore the search space. Random Search could be considered as baseline of search algorithm. [Detailed Description](./HyperoptTuner.md)

**Requirement of classArg:**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: Random
```

<br>

<a name="Anneal"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Anneal`

> Built-in Tuner Name: **Anneal**

**Suggested scenario**

Anneal is suggested when each trial does not take too long, and you have enough computation resource(almost same with Random Search). Or the variables in search space could be sample from some prior distribution. [Detailed Description](./HyperoptTuner.md)


**Requirement of classArg**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: Anneal
  classArgs:
    optimize_mode: maximize
```

<br>

<a name="Evolution"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Naïve Evolution`

> Built-in Tuner Name: **Evolution**

**Suggested scenario**

Its requirement of computation resource is relatively high. Specifically, it requires large initial population to avoid falling into local optimum. If your trial is short or leverages assessor, this tuner is a good choice. And, it is more suggested when your trial code supports weight transfer, that is, the trial could inherit the converged weights from its parent(s). This can greatly speed up the training progress. [Detailed Description](./EvolutionTuner.md)

**Requirement of classArg**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.

* **population_size** (*int value(should >0), optional, default = 20*) - the initial size of the population(trial num) in evolution tuner.

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: Evolution
  classArgs:
    optimize_mode: maximize
    population_size: 100
```

<br>

<a name="SMAC"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `SMAC`

> Built-in Tuner Name: **SMAC**

**Please note that SMAC doesn't support running on windows currently. The specific reason can be referred to this [GitHub issue](https://github.com/automl/SMAC3/issues/483).**

**Installation**

SMAC need to be installed by following command before first use.

```bash
nnictl package install --name=SMAC
```

**Suggested scenario**

Similar to TPE, SMAC is also a black-box tuner which can be tried in various scenarios, and is suggested when computation resource is limited. It is optimized for discrete hyperparameters, thus, suggested when most of your hyperparameters are discrete. [Detailed Description](./SmacTuner.md)

**Requirement of classArg**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: SMAC
  classArgs:
    optimize_mode: maximize
```

<br>

<a name="Batch"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Batch Tuner`

> Built-in Tuner Name: BatchTuner

**Suggested scenario**

If the configurations you want to try have been decided, you can list them in searchspace file (using `choice`) and run them using batch tuner. [Detailed Description](./BatchTuner.md)

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: BatchTuner
```

<br>

Note that the search space that BatchTuner supported like:

```json
{
    "combine_params":
    {
        "_type" : "choice",
        "_value" : [{"optimizer": "Adam", "learning_rate": 0.00001},
                    {"optimizer": "Adam", "learning_rate": 0.0001},
                    {"optimizer": "Adam", "learning_rate": 0.001},
                    {"optimizer": "SGD", "learning_rate": 0.01},
                    {"optimizer": "SGD", "learning_rate": 0.005},
                    {"optimizer": "SGD", "learning_rate": 0.0002}]
    }
}
```

The search space file including the high-level key `combine_params`. The type of params in search space must be `choice` and the `values` including all the combined-params value.

<a name="GridSearch"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Grid Search`

> Built-in Tuner Name: **Grid Search**

**Suggested scenario**

Note that the only acceptable types of search space are `choice`, `quniform`, `randint`. 

It is suggested when search space is small, it is feasible to exhaustively sweeping the whole search space. [Detailed Description](./GridsearchTuner.md)

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: GridSearch
```

<br>

<a name="Hyperband"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Hyperband`

> Built-in Advisor Name: **Hyperband**

**Suggested scenario**

It is suggested when you have limited computation resource but have relatively large search space. It performs well in the scenario that intermediate result (e.g., accuracy) can reflect good or bad of final result (e.g., accuracy) to some extent. [Detailed Description](./HyperbandAdvisor.md)

**Requirement of classArg**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.
* **R** (*int, optional, default = 60*) - the maximum budget given to a trial (could be the number of mini-batches or epochs) can be allocated to a trial. Each trial should use TRIAL_BUDGET to control how long it runs.
* **eta** (*int, optional, default = 3*) - `(eta-1)/eta` is the proportion of discarded trials

**Usage example**

```yaml
# config.yml
advisor:
  builtinAdvisorName: Hyperband
  classArgs:
    optimize_mode: maximize
    R: 60
    eta: 3
```

<br>

<a name="NetworkMorphism"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Network Morphism`

> Built-in Tuner Name: **NetworkMorphism**

**Installation**

NetworkMorphism requires [PyTorch](https://pytorch.org/get-started/locally) and [Keras](https://keras.io/#installation), so users should install them first. The corresponding requirements file is [here](https://github.com/microsoft/nni/blob/master/examples/trials/network_morphism/requirements.txt).

**Suggested scenario**

It is suggested that you want to apply deep learning methods to your task (your own dataset) but you have no idea of how to choose or design a network. You modify the [example](https://github.com/Microsoft/nni/tree/master/examples/trials/network_morphism/cifar10/cifar10_keras.py) to fit your own dataset and your own data augmentation method. Also you can change the batch size, learning rate or optimizer. It is feasible for different tasks to find a good network architecture. Now this tuner only supports the computer vision domain. [Detailed Description](./NetworkmorphismTuner.md)

**Requirement of classArg**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.
* **task** (*('cv'), optional, default = 'cv'*) - The domain of experiment, for now, this tuner only supports the computer vision(cv) domain.
* **input_width** (*int, optional, default = 32*) - input image width
* **input_channel** (*int, optional, default = 3*) - input image channel
* **n_output_node** (*int, optional, default = 10*) - number of classes

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: NetworkMorphism
    classArgs:
      optimize_mode: maximize
      task: cv
      input_width: 32
      input_channel: 3
      n_output_node: 10
```

<br>

<a name="MetisTuner"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `Metis Tuner`

> Built-in Tuner Name: **MetisTuner**

Note that the only acceptable types of search space are `choice`, `quniform`, `uniform` and `randint`.

**Suggested scenario**

Similar to TPE and SMAC, Metis is a black-box tuner. If your system takes a long time to finish each trial, Metis is more favorable than other approaches such as random search. Furthermore, Metis provides guidance on the subsequent trial. Here is an [example](https://github.com/Microsoft/nni/tree/master/examples/trials/auto-gbdt/search_space_metis.json) about the use of Metis. User only need to send the final result like `accuracy` to tuner, by calling the NNI SDK. [Detailed Description](./MetisTuner.md)

**Requirement of classArg**

* **optimize_mode** (*'maximize' or 'minimize', optional, default = 'maximize'*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: MetisTuner
  classArgs:
    optimize_mode: maximize
```

<br>

<a name="BOHB"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `BOHB Advisor`

> Built-in Tuner Name: **BOHB**

**Installation**

BOHB advisor requires [ConfigSpace](https://github.com/automl/ConfigSpace) package, ConfigSpace need to be installed by following command before first use.

```bash
nnictl package install --name=BOHB
```

**Suggested scenario**

Similar to Hyperband, it is suggested when you have limited computation resource but have relatively large search space. It performs well in the scenario that intermediate result (e.g., accuracy) can reflect good or bad of final result (e.g., accuracy) to some extent. In this case, it may converges to a better configuration due to Bayesian optimization usage. [Detailed Description](./BohbAdvisor.md)

**Requirement of classArg**

* **optimize_mode** (*maximize or minimize, optional, default = maximize*) - If 'maximize', tuners will target to maximize metrics. If 'minimize', tuner will target to minimize metrics.
* **min_budget** (*int, optional, default = 1*) - The smallest budget assign to a trial job, (budget could be the number of mini-batches or epochs). Needs to be positive.
* **max_budget** (*int, optional, default = 3*) - The largest budget assign to a trial job, (budget could be the number of mini-batches or epochs). Needs to be larger than min_budget.
* **eta** (*int, optional, default = 3*) - In each iteration, a complete run of sequential halving is executed. In it, after evaluating each configuration on the same subset size, only a fraction of 1/eta of them 'advances' to the next round. Must be greater or equal to 2.
* **min_points_in_model**(*int, optional, default = None*): number of observations to start building a KDE. Default 'None' means dim+1, when the number of completed trial in this budget is equal or larger than `max{dim+1, min_points_in_model}`, BOHB will start to build a KDE model of this budget, then use KDE model to guide the configuration selection. Need to be positive.(dim means the number of hyperparameters in search space)
* **top_n_percent**(*int, optional, default = 15*): percentage (between 1 and 99, default 15) of the observations that are considered good. Good points and bad points are used for building KDE models. For example, if you have 100 observed trials and top_n_percent is 15, then top 15 point will used for building good point models "l(x)", the remaining 85 point will used for building bad point models "g(x)".
* **num_samples**(*int, optional, default = 64*): number of samples to optimize EI (default 64). In this case, we will sample "num_samples"(default = 64) points, and compare the result of l(x)/g(x), then return one with the maximum l(x)/g(x) value as the next configuration if the optimize_mode is maximize. Otherwise, we return the smallest one.
* **random_fraction**(*float, optional, default = 0.33*): fraction of purely random configurations that are sampled from the prior without the model.
* **bandwidth_factor**(*float, optional, default = 3.0*): to encourage diversity, the points proposed to optimize EI, are sampled from a 'widened' KDE where the bandwidth is multiplied by this factor. Suggest to use default value if you are not familiar with KDE.
* **min_bandwidth**(*float, optional, default = 0.001*): to keep diversity, even when all (good) samples have the same value for one of the parameters, a minimum bandwidth (default: 1e-3) is used instead of zero. Suggest to use default value if you are not familiar with KDE.

*Please note that currently float type only support decimal representation, you have to use 0.333 instead of 1/3 and 0.001 instead of 1e-3.*

**Usage example**

```yaml
advisor:
  builtinAdvisorName: BOHB
  classArgs:
    optimize_mode: maximize
    min_budget: 1
    max_budget: 27
    eta: 3
```

<a name="GPTuner"></a>

![](https://placehold.it/15/1589F0/000000?text=+) `GP Tuner`

> Built-in Tuner Name: **GPTuner**

Note that the only acceptable types of search space are `choice`, `randint`, `uniform`, `quniform`,  `loguniform`, `qloguniform`.

**Suggested scenario**

As a strategy in Sequential Model-based Global Optimization(SMBO) algorithm, GP Tuner uses a proxy optimization problem (finding the maximum of the acquisition function) that, albeit still a hard problem, is cheaper (in the computational sense) and common tools can be employed. Therefore GP Tuner is most adequate for situations where the function to be optimized is a very expensive endeavor. GP can be used when the computation resource is limited. While GP Tuner has a computational cost that grows at *O(N^3)* due to the requirement of inverting the Gram matrix, so it's not suitable when lots of trials are needed. [Detailed Description](./GPTuner.md)

**Requirement of classArg**

* **optimize_mode** (*'maximize' or 'minimize', optional, default = 'maximize'*) - If 'maximize', the tuner will target to maximize metrics. If 'minimize', the tuner will target to minimize metrics.
* **utility** (*'ei', 'ucb' or 'poi', optional, default = 'ei'*) - The kind of utility function(acquisition function). 'ei', 'ucb' and 'poi' corresponds to 'Expected Improvement', 'Upper Confidence Bound' and 'Probability of Improvement' respectively. 
* **kappa** (*float, optional, default = 5*) - Used by utility function 'ucb'. The bigger `kappa` is, the more the tuner will be exploratory.
* **xi** (*float, optional, default = 0*) - Used by utility function 'ei' and 'poi'. The bigger `xi` is, the more the tuner will be exploratory.
* **nu** (*float, optional, default = 2.5*) - Used to specify Matern kernel. The smaller nu, the less smooth the approximated function is.
* **alpha** (*float, optional, default = 1e-6*) - Used to specify Gaussian Process Regressor. Larger values correspond to increased noise level in the observations.
* **cold_start_num** (*int, optional, default = 10*) - Number of random exploration to perform before Gaussian Process. Random exploration can help by diversifying the exploration space.
* **selection_num_warm_up** (*int, optional, default = 1e5*) - Number of random points to evaluate for getting the point which maximizes the acquisition function.
* **selection_num_starting_points** (*int, optional, default = 250*) - Number of times to run L-BFGS-B from a random starting point after the warmup.

**Usage example**

```yaml
# config.yml
tuner:
  builtinTunerName: GPTuner
  classArgs:
    optimize_mode: maximize
    utility: 'ei'
    kappa: 5.0
    xi: 0.0
    nu: 2.5
    alpha: 1e-6
    cold_start_num: 10
    selection_num_warm_up: 100000
    selection_num_starting_points: 250
```