fftpack.h

/*
 * This file contains a Fortran to C translation of the 1D transformations
 * based on the original FFTPACK, written by paul n swarztrauber
 * at the national center for atmospheric research and available
 * at www.netlib.org. FFTPACK is in the public domain.
 *
 * Higher-dimension transforms copyright Erik Lindahl, 2008-2009.
 * Just as FFTPACK, this file may be redistributed freely, and can be
 * considered to be in the public domain.
 *
 * Any errors in this (threadsafe, but not threaded) C version
 * are due to the f2c translator, or hacks by Erik Lindahl.
 *
 * Copyright (c) 2009, Erik Lindahl
 * All rights reserved.
 * Contact: lindahl@cbr.su.se
 * Center for Biomembrane Research
 * Stockholm University, Sweden.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer. Redistributions in binary
 * form must reproduce the above copyright notice, this list of conditions and
 * the following disclaimer in the documentation and/or other materials provided
 * with the distribution.
 * Neither the name of the author/university nor the names of its contributors may
 * be used to endorse or promote products derived from this software without
 * specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include "../SimTKUtilities/SimTKOpenMMCommon.h"

#ifndef _FFTPACK_H_
#define _FFTPACK_H_


#include <stdio.h>



#ifdef __cplusplus
extern "C" {
#endif
#if 0
} /* fixes auto-indentation problems */
#endif


typedef struct {
	RealOpenMM re;
	RealOpenMM im;
} t_complex;


/*! \brief Datatype for FFT setup
 *
 *  The fftpack_t type contains all the setup information, e.g. twiddle
 *  factors, necessary to perform an FFT. Internally it is mapped to
 *  whatever FFT library we are using, or the built-in FFTPACK if no fast
 *  external library is available.
 */
typedef struct fftpack *
fftpack_t;




/*! \brief Specifier for FFT direction.
 *
 *  The definition of the 1D forward transform from input x[] to output y[] is
 *  \f[
 *  y_{k} = \sum_{j=0}^{N-1} x_{j} \exp{-i 2 \pi j k /N}
 *  \f]
 *
 *  while the corresponding backward transform is
 *
 *  \f[
 *  y_{k} = \sum_{j=0}^{N-1} x_{j} \exp{i 2 \pi j k /N}
 *  \f]
 *
 *  A forward-backward transform pair will this result in data scaled by N.
 *
 */
typedef enum fftpack_direction
{
    FFTPACK_FORWARD,         /*!< Forward complex-to-complex transform  */
    FFTPACK_BACKWARD,        /*!< Backward complex-to-complex transform */
} fftpack_direction;



/*! \brief Setup a 1-dimensional complex-to-complex transform
 *
 *  \param fft    Pointer to opaque Gromacs FFT datatype
 *  \param nx     Length of transform
 *
 *  \return status - 0 or a standard error message.
 */
int
fftpack_init_1d        (fftpack_t *       fft,
                        int               nx);



/*! \brief Setup a 2-dimensional complex-to-complex transform
 *
 *  \param fft    Pointer to opaque Gromacs FFT datatype
 *  \param nx     Length of transform in first dimension
 *  \param ny     Length of transform in second dimension
 *
 *  \return status - 0 or a standard error message.
 *
 */
int
fftpack_init_2d        (fftpack_t *         fft,
                        int                 nx,
                        int                 ny);




/*! \brief Setup a 3-dimensional complex-to-complex transform
 *
 *  \param fft    Pointer to opaque Gromacs FFT datatype
 *  \param nx     Length of transform in first dimension
 *  \param ny     Length of transform in second dimension
 *  \param nz     Length of transform in third dimension
 *
 *  \return status - 0 or a standard error message.
 *
 */
int
fftpack_init_3d        (fftpack_t *         fft,
                        int                 nx,
                        int                 ny,
                        int                 nz);




/*! \brief Perform a 1-dimensional complex-to-complex transform
 *
 *  Performs an instance of a transform previously initiated.
 *
 *  \param setup     Setup returned from fftpack_init_1d()
 *  \param dir       Forward or Backward
 *  \param in_data   Input grid data.
 *  \param out_data  Output grid data.
 *                   You can provide the same pointer for in_data and out_data
 *                   to perform an in-place transform.
 *
 * \return 0 on success, or an error code.
 *
 * \note Data pointers are declared as void, to avoid casting pointers
 *       depending on your grid type.
 */
int
fftpack_exec_1d          (fftpack_t                  setup,
                          enum fftpack_direction     dir,
                          t_complex *                in_data,
                          t_complex *                out_data);

/*! \brief Perform a 2-dimensional complex-to-complex transform
 *
 *  Performs an instance of a transform previously initiated.
 *
 *  \param setup     Setup returned from fftpack_init_1d()
 *  \param dir       Forward or Backward
 *  \param in_data   Input grid data.
 *  \param out_data  Output grid data.
 *                   You can provide the same pointer for in_data and out_data
 *                   to perform an in-place transform.
 *
 * \return 0 on success, or an error code.
 *
 * \note Data pointers are declared as void, to avoid casting pointers
 *       depending on your grid type.
 */
int
fftpack_exec_2d          (fftpack_t                  setup,
                          enum fftpack_direction     dir,
                          t_complex *                in_data,
                          t_complex *                out_data);


/*! \brief Perform a 3-dimensional complex-to-complex transform
 *
 *  Performs an instance of a transform previously initiated.
 *
 *  \param setup     Setup returned from fftpack_init_1d()
 *  \param dir       Forward or Backward
 *  \param in_data   Input grid data.
 *  \param out_data  Output grid data.
 *                   You can provide the same pointer for in_data and out_data
 *                   to perform an in-place transform.
 *
 * \return 0 on success, or an error code.
 *
 * \note Data pointers are declared as void, to avoid casting pointers
 *       depending on your grid type.
 */
int
fftpack_exec_3d          (fftpack_t                  setup,
                          enum fftpack_direction     dir,
                          t_complex *                in_data,
                          t_complex *                out_data);


/*! \brief Release an FFT setup structure
 *
 *  Destroy setup and release all allocated memory.
 *
 *  \param setup Setup returned from fftpack_init_1d(), or one
 *		 of the other initializers.
 *
 */
void
fftpack_destroy          (fftpack_t                 setup);



#ifdef __cplusplus
}
#endif

#endif /* _FFTPACK_H_ */