update the import docs (#6104)

docs/import.md

-# Import
+# Importing a model
 
-GGUF models and select Safetensors models can be imported directly into Ollama.
+## Table of Contents
 
-## Import GGUF
+  * [Importing a Safetensors adapter](#Importing-a-fine-tuned-adapter-from-Safetensors-weights)
+  * [Importing a Safetensors model](#Importing-a-model-from-Safetensors-weights)
+  * [Importing a GGUF file](#Importing-a-GGUF-based-model-or-adapter)
+  * [Sharing models on ollama.com](#Sharing-your-model-on-ollama.com)
 
-A binary GGUF file can be imported directly into Ollama through a Modelfile.
+## Importing a fine tuned adapter from Safetensors weights
+
+First, create a `Modelfile` with a `FROM` command pointing at the base model you used for fine tuning, and an `ADAPTER` command which points to the directory with your Safetensors adapter:
 
 ```dockerfile
-FROM /path/to/file.gguf
+FROM <base model name>
+ADAPTER /path/to/safetensors/adapter/directory
+```
+
+Make sure that you use the same base model in the `FROM` command as you used to create the adapter otherwise you will get erratic results. Most frameworks use different quantization methods, so it's best to use non-quantized (i.e. non-QLoRA) adapters. If your adapter is in the same directory as your `Modelfile`, use `ADAPTER .` to specify the adapter path.
+
+Now run `ollama create` from the directory where the `Modelfile` was created:
+
+```bash
+ollama create my-model
 ```
 
-## Import Safetensors
+Lastly, test the model:
+
+```bash
+ollama run my-model
+```
 
-If the model being imported is one of these architectures, it can be imported directly into Ollama through a Modelfile:
+Ollama supports importing adapters based on several different model architectures including:
 
- - LlamaForCausalLM
- - MistralForCausalLM
- - MixtralForCausalLM
- - GemmaForCausalLM
- - Phi3ForCausalLM
+  * Llama (including Llama 2, Llama 3, and Llama 3.1);
+  * Mistral (including Mistral 1, Mistral 2, and Mixtral); and
+  * Gemma (including Gemma 1 and Gemma 2)
+
+You can create the adapter using a fine tuning framework or tool which can output adapters in the Safetensors format, such as:
+
+  * Hugging Face [fine tuning framework] (https://huggingface.co/docs/transformers/en/training)
+  * [Unsloth](https://github.com/unslothai/unsloth)
+  * [MLX](https://github.com/ml-explore/mlx)
+
+
+## Importing a model from Safetensors weights
+
+First, create a `Modelfile` with a `FROM` command which points to the directory containing your Safetensors weights:
 
 ```dockerfile
 FROM /path/to/safetensors/directory
 ```
 
-For architectures not directly convertable by Ollama, see llama.cpp's [guide](https://github.com/ggerganov/llama.cpp/blob/master/README.md#prepare-and-quantize) on conversion. After conversion, see [Import GGUF](#import-gguf).
+If you create the Modelfile in the same directory as the weights, you can use the command `FROM .`.
+
+Now run the `ollama create` command from the directory where you created the `Modelfile`:
+
+```shell
+ollama create my-model
+```
+
+Lastly, test the model:
+
+```shell
+ollama run my-model
+```
+
+Ollama supports importing models for several different architectures including:
+
+  * Llama (including Llama 2, Llama 3, and Llama 3.1);
+  * Mistral (including Mistral 1, Mistral 2, and Mixtral);
+  * Gemma (including Gemma 1 and Gemma 2); and
+  * Phi3
 
-## Automatic Quantization
+This includes importing foundation models as well as any fine tuned models which which have been _fused_ with a foundation model.
 
-> [!NOTE]
-> Automatic quantization requires v0.1.35 or higher.
 
-Ollama is capable of quantizing FP16 or FP32 models to any of the supported quantizations with the `-q/--quantize` flag in `ollama create`.
+## Importing a GGUF based model or adapter
+
+If you have a GGUF based model or adapter it is possible to import it into Ollama. You can obtain a GGUF model or adapter by:
+
+  * converting a Safetensors model with the `convert_hf_to_gguf.py` from Llama.cpp; 
+  * converting a Safetensors adapter with the `convert_lora_to_gguf.py` from Llama.cpp; or
+  * downloading a model or adapter from a place such as HuggingFace
+
+To import a GGUF model, create a `Modelfile` containg:
+
+```dockerfile
+FROM /path/to/file.gguf
+```
+
+For a GGUF adapter, create the `Modelfile` with:
+
+```dockerfile
+FROM <model name>
+ADAPTER /path/to/file.gguf
+```
+
+When importing a GGUF adapter, it's important to use the same base model as the base model that the adapter was created with. You can use:
+
+ * a model from Ollama
+ * a GGUF file
+ * a Safetensors based model 
+
+Once you have created your `Modelfile`, use the `ollama create` command to build the model.
+
+```shell
+ollama create my-model
+```
+
+## Quantizing a Model
+
+Quantizing a model allows you to run models faster and with less memory consumption but at reduced accuracy. This allows you to run a model on more modest hardware.
+
+Ollama can quantize FP16 and FP32 based models into different quantization levels using the `-q/--quantize` flag with the `ollama create` command.
+
+First, create a Modelfile with the FP16 or FP32 based model you wish to quantize.
 
 ```dockerfile
 FROM /path/to/my/gemma/f16/model
 ```
 
+Use `ollama create` to then create the quantized model.
+
 ```shell
-$ ollama create -q Q4_K_M mymodel
+$ ollama create --quantize q4_K_M mymodel
 transferring model data
 quantizing F16 model to Q4_K_M
 creating new layer sha256:735e246cc1abfd06e9cdcf95504d6789a6cd1ad7577108a70d9902fef503c1bd
@@ -49,42 +134,53 @@ success
 
 ### Supported Quantizations
 
-- `Q4_0`
-- `Q4_1`
-- `Q5_0`
-- `Q5_1`
-- `Q8_0`
+- `q4_0`
+- `q4_1`
+- `q5_0`
+- `q5_1`
+- `q8_0`
 
 #### K-means Quantizations
 
-- `Q3_K_S`
-- `Q3_K_M`
-- `Q3_K_L`
-- `Q4_K_S`
-- `Q4_K_M`
-- `Q5_K_S`
-- `Q5_K_M`
-- `Q6_K`
+- `q3_K_S`
+- `q3_K_M`
+- `q3_K_L`
+- `q4_K_S`
+- `q4_K_M`
+- `q5_K_S`
+- `q5_K_M`
+- `q6_K`
 
-## Template Detection
 
-> [!NOTE]
-> Template detection requires v0.1.42 or higher.
+## Sharing your model on ollama.com
 
-Ollama uses model metadata, specifically `tokenizer.chat_template`, to automatically create a template appropriate for the model you're importing.
+You can share any model you have created by pushing it to [ollama.com](https://ollama.com) so that other users can try it out.
 
-```dockerfile
-FROM /path/to/my/gemma/model
+First, use your browser to go to the [Ollama Sign-Up](https://ollama.com/signup) page. If you already have an account, you can skip this step.
+
+![Sign-Up](images/signup.png)
+
+The `Username` field will be used as part of your model's name (e.g. `jmorganca/mymodel`), so make sure you are comfortable with the username that you have selected.
+
+Now that you have created an account and are signed-in, go to the [Ollama Keys Settings](https://ollama.com/settings/keys) page.
+
+Follow the directions on the page to determine where your Ollama Public Key is located.
+
+![Ollama Key](images/ollama-keys.png)
+
+Click on the `Add Ollama Public Key` button, and copy and paste the contents of your Ollama Public Key into the text field.
+
+To push a model to [ollama.com](https://ollama.com), first make sure that it is named correctly with your username. You may have to use the `ollama cp` command to copy
+your model to give it the correct name. Once you're happy with your model's name, use the `ollama push` command to push it to [ollama.com](https://ollama.com).
+
+```shell
+ollama cp mymodel myuser/mymodel
+ollama push myuser/mymodel
 ```
 
+Once your model has been pushed, other users can pull and run it by using the command:
+
 ```shell
-$ ollama create mymodel
-transferring model data
-using autodetected template gemma-instruct
-creating new layer sha256:baa2a0edc27d19cc6b7537578a9a7ba1a4e3214dc185ed5ae43692b319af7b84
-creating new layer sha256:ba66c3309914dbef07e5149a648fd1877f030d337a4f240d444ea335008943cb
-writing manifest
-success
+ollama run myuser/mymodel
 ```
 
-Defining a template in the Modelfile will disable this feature which may be useful if you want to use a different template than the autodetected one.