lr_schedule.py

# Copyright 2021 The TensorFlow Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Learning rate schedule classes."""

from typing import Mapping, Any, Union, Optional

import tensorflow as tf


class LinearWarmup(tf.keras.optimizers.schedules.LearningRateSchedule):
  """Linear warmup schedule."""

  def __init__(self,
               after_warmup_lr_sched: Union[
                   tf.keras.optimizers.schedules.LearningRateSchedule, float],
               warmup_steps: int,
               warmup_learning_rate: float,
               name: Optional[str] = None):
    """Add linear warmup schedule to a learning rate schedule.

    warmup_lr is the initial learning rate, the final learning rate of the
    init_warmup period is the initial learning rate of lr_schedule in use.
    The learning rate at each step linearly increased according to the following
    formula:
      learning_rate = warmup_lr + step / warmup_steps
                    * (final_warmup_lr - warmup_lr).
    Using warmup overrides the learning rate schedule by the number of warmup
    steps.

    Args:
      after_warmup_lr_sched: tf.keras.optimizers.schedules .LearningRateSchedule
        or a constant.
      warmup_steps: Number of the warmup steps.
      warmup_learning_rate: Initial learning rate for the warmup.
      name: Optional, name of warmup schedule.
    """
    super().__init__()
    self._name = name
    self._after_warmup_lr_sched = after_warmup_lr_sched
    self._warmup_steps = warmup_steps
    self._init_warmup_lr = warmup_learning_rate
    if isinstance(after_warmup_lr_sched,
                  tf.keras.optimizers.schedules.LearningRateSchedule):
      self._final_warmup_lr = after_warmup_lr_sched(warmup_steps)
    else:
      self._final_warmup_lr = tf.cast(after_warmup_lr_sched, dtype=tf.float32)

  def __call__(self, step: int):

    global_step = tf.cast(step, dtype=tf.float32)

    linear_warmup_lr = (
        self._init_warmup_lr + global_step / self._warmup_steps *
        (self._final_warmup_lr - self._init_warmup_lr))

    if isinstance(self._after_warmup_lr_sched,
                  tf.keras.optimizers.schedules.LearningRateSchedule):
      after_warmup_lr = self._after_warmup_lr_sched(step)
    else:
      after_warmup_lr = tf.cast(self._after_warmup_lr_sched, dtype=tf.float32)

    lr = tf.cond(global_step < self._warmup_steps,
                 lambda: linear_warmup_lr,
                 lambda: after_warmup_lr)
    return lr

  def get_config(self) -> Mapping[str, Any]:
    if isinstance(self._after_warmup_lr_sched,
                  tf.keras.optimizers.schedules.LearningRateSchedule):
      config = {
          "after_warmup_lr_sched": self._after_warmup_lr_sched.get_config()}  # pytype: disable=attribute-error
    else:
      config = {"after_warmup_lr_sched": self._after_warmup_lr_sched}  # pytype: disable=attribute-error

    config.update({
        "warmup_steps": self._warmup_steps,
        "warmup_learning_rate": self._init_warmup_lr,
        "name": self._name
    })
    return config


class PolynomialWarmUp(tf.keras.optimizers.schedules.LearningRateSchedule):
  """Applies polynomial warmup schedule on a given learning rate decay schedule."""

  def __init__(self,
               after_warmup_lr_sched: Union[
                   tf.keras.optimizers.schedules.LearningRateSchedule, float],
               warmup_steps: int,
               power: float = 1.0,
               name: str = "PolynomialWarmup"):
    super().__init__()
    if isinstance(after_warmup_lr_sched,
                  tf.keras.optimizers.schedules.LearningRateSchedule):
      self._initial_learning_rate = after_warmup_lr_sched(warmup_steps)
    else:
      self._initial_learning_rate = tf.cast(
          after_warmup_lr_sched, dtype=tf.float32)

    self._warmup_steps = warmup_steps
    self._power = power
    self._after_warmup_lr_sched = after_warmup_lr_sched
    self._name = name

  def __call__(self, step):
    with tf.name_scope(self._name or "PolynomialWarmUp") as name:
      # Implements polynomial warmup. i.e., if global_step < warmup_steps, the
      # learning rate will be `global_step/num_warmup_steps * init_lr`.
      global_step_float = tf.cast(step, tf.float32)
      warmup_steps_float = tf.cast(self._warmup_steps, tf.float32)

      if self._warmup_steps <= 0:
        warmup_percent_done = 1.0
      else:
        # A zero `step` may cause Inf. So make `step` positive.
        step_non_zero = tf.math.maximum(global_step_float, 1.0)
        warmup_percent_done = step_non_zero / warmup_steps_float

      warmup_learning_rate = (
          self._initial_learning_rate *
          tf.math.pow(warmup_percent_done, self._power))

      if isinstance(self._after_warmup_lr_sched,
                    tf.keras.optimizers.schedules.LearningRateSchedule):
        after_warmup_lr = self._after_warmup_lr_sched(step)
      else:
        after_warmup_lr = tf.cast(self._after_warmup_lr_sched, dtype=tf.float32)

      return tf.cond(
          global_step_float < warmup_steps_float,
          lambda: warmup_learning_rate,
          lambda: after_warmup_lr,
          name=name)

  def get_config(self) -> Mapping[str, Any]:
    if isinstance(self._after_warmup_lr_sched,
                  tf.keras.optimizers.schedules.LearningRateSchedule):
      config = {
          "after_warmup_lr_sched": self._after_warmup_lr_sched.get_config()}  # pytype: disable=attribute-error
    else:
      config = {"after_warmup_lr_sched": self._after_warmup_lr_sched}  # pytype: disable=attribute-error

    config.update({
        "warmup_steps": self._warmup_steps,
        "power": self._power,
        "name": self._name
    })
    return config


class DirectPowerDecay(tf.keras.optimizers.schedules.LearningRateSchedule):
  """Learning rate schedule follows lr * (step)^power."""

  def __init__(self,
               initial_learning_rate: float,
               power: float = 1.0,
               name: str = "DirectPowerDecay"):
    """Initialize configuration of the learning rate schedule.

    Args:
      initial_learning_rate: The initial learning rate.
      power: The order of the polynomial.
      name: Optional, name of learning rate schedule.
    """
    super().__init__()
    self._initial_learning_rate = initial_learning_rate
    self._power = power
    self._name = name

  def __call__(self, step):
    with tf.name_scope(self._name or "DirectPowerDecay"):
      step = tf.cast(step, tf.float32)
      learning_rate = self._initial_learning_rate
      # A zero `step` may cause Inf. So make `step` positive.
      step_non_zero = tf.math.maximum(step, 1.0)
      learning_rate *= tf.math.pow(step_non_zero, self._power)
      return learning_rate

  def get_config(self):
    """Get the configuration of the learning rate schedule."""
    return {
        "initial_learning_rate": self._initial_learning_rate,
        "power": self._power,
        "name": self._name,
    }


class PowerAndLinearDecay(tf.keras.optimizers.schedules.LearningRateSchedule):
  """Learning rate schedule with multiplied by linear decay at the end.

  The schedule has the following behavoir.
  Let offset_step = step - offset.
  1) offset_step < 0, the actual learning rate equals initial_learning_rate.
  2) offset_step <= total_decay_steps * (1 - linear_decay_fraction), the
  actual learning rate equals lr * offset_step^power.
  3) total_decay_steps * (1 - linear_decay_fraction) < offset_step <
  total_decay_steps, the actual learning rate equals lr * offset_step^power *
  (total_decay_steps - offset_step) / (total_decay_steps *
  linear_decay_fraction).
  4) offset_step > total_decay_steps, the actual learning rate equals zero.
  """

  def __init__(self,
               initial_learning_rate: float,
               total_decay_steps: int,
               power: float = 1.0,
               linear_decay_fraction: float = 0.1,
               offset: int = 0,
               name: str = "PowerAndLinearDecay"):
    """Initialize configuration of the learning rate schedule.

    Args:
      initial_learning_rate: The initial learning rate.
      total_decay_steps: The total number of steps for power + linear decay.
      power: The order of the polynomial.
      linear_decay_fraction: In the last `linear_decay_fraction` steps, the
        learning rate will be multiplied by a linear decay.
      offset: The offset applied to steps.
      name: Optional, name of learning rate schedule.
    """
    super().__init__()
    self._initial_learning_rate = initial_learning_rate
    self._total_decay_steps = total_decay_steps
    self._power = power
    self._linear_decay_fraction = linear_decay_fraction
    self._offset = offset
    self._name = name

  def __call__(self, step):
    with tf.name_scope(self._name or "PowerAndLinearDecay"):
      step = tf.cast(step - self._offset, tf.float32)
      learning_rate = self._initial_learning_rate
      # A zero `step` may cause Inf. So make `step` positive.
      step_non_zero = tf.math.maximum(step, 1.0)
      learning_rate *= tf.math.pow(step_non_zero, self._power)
      if self._total_decay_steps * self._linear_decay_fraction > 0:
        learning_rate *= tf.minimum(
            1.0, (self._total_decay_steps - step) /
            (self._total_decay_steps * self._linear_decay_fraction))
        learning_rate = tf.maximum(0.0, learning_rate)
      return learning_rate

  def get_config(self):
    """Get the configuration of the learning rate schedule."""
    return {
        "initial_learning_rate": self._initial_learning_rate,
        "total_decay_steps": self._total_decay_steps,
        "power": self._power,
        "linear_decay_fraction": self._linear_decay_fraction,
        "offset": self._offset,
        "name": self._name,
    }


class PowerDecayWithOffset(tf.keras.optimizers.schedules.LearningRateSchedule):
  """Power learning rate decay with offset.

  Learning rate equals to `pre_offset_learning_rate` if `step` < `offset`.
  Otherwise, learning rate equals to lr * (step - offset)^power.
  """

  def __init__(self,
               initial_learning_rate: float,
               power: float = 1.0,
               offset: int = 0,
               pre_offset_learning_rate: float = 1.0e6,
               name: str = "PowerDecayWithOffset"):
    """Initialize configuration of the learning rate schedule.

    Args:
      initial_learning_rate: The initial learning rate.
      power: The order of the polynomial.
      offset: The offset when computing the power decay.
      pre_offset_learning_rate: The maximum learning rate we'll use.
      name: Optional, name of learning rate schedule.
    """
    super().__init__()
    self._initial_learning_rate = initial_learning_rate
    self._power = power
    self._offset = offset
    self._pre_offset_lr = pre_offset_learning_rate
    self._name = name

  def __call__(self, step):
    with tf.name_scope(self._name or "PowerDecayWithOffset"):
      step = tf.cast(step, tf.float32)
      lr_after_offset = tf.math.pow(
          tf.math.maximum(step - self._offset, 1.0), self._power) * (
              self._initial_learning_rate)

      sign = tf.cast(step > self._offset, tf.float32)
      lr_combined = (1.0 - sign) * self._pre_offset_lr + sign * lr_after_offset
      # Power may give infinitely large LR. So cap it with pre_offset_lr.
      return tf.math.minimum(lr_combined, self._pre_offset_lr)

  def get_config(self):
    """Get the configuration of the learning rate schedule."""
    return {
        "initial_learning_rate": self._initial_learning_rate,
        "power": self._power,
        "offset": self._offset,
        "pre_offset_learning_rate": self._pre_offset_lr,
        "name": self._name,
    }