init

LICENSE

+MIT License
+
+Copyright (c) 2016-2020: Zachary Yedidia, et al.
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

README.md

+<img alt="micro logo" src="./assets/micro-logo-drop.svg" width="500px"/>
+
+[![Build Status](https://travis-ci.org/zyedidia/micro.svg?branch=master)](https://travis-ci.org/zyedidia/micro)
+[![Go Report Card](https://goreportcard.com/badge/github.com/zyedidia/micro)](https://goreportcard.com/report/github.com/zyedidia/micro)
+[![Release](https://img.shields.io/github/release/zyedidia/micro.svg?label=Release)](https://github.com/zyedidia/micro/releases)
+[![MIT License](https://img.shields.io/badge/license-MIT-blue.svg)](https://github.com/zyedidia/micro/blob/master/LICENSE)
+[![Join the chat at https://gitter.im/zyedidia/micro](https://badges.gitter.im/zyedidia/micro.svg)](https://gitter.im/zyedidia/micro?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
+[![Snap Status](https://snapcraft.io/micro/badge.svg)](https://snapcraft.io/micro)
+
+**micro** is a terminal-based text editor that aims to be easy to use and intuitive, while also taking advantage of the capabilities
+of modern terminals. It comes as a single, batteries-included, static binary with no dependencies; you can download and use it right now!
+
+As its name indicates, micro aims to be somewhat of a successor to the nano editor by being easy to install and use.
+It strives to be enjoyable as a full-time editor for people who prefer to work in a terminal, or those who regularly edit files over SSH.
+
+Here is a picture of micro editing its source code.
+
+![Screenshot](./assets/micro-solarized.png)
+
+To see more screenshots of micro, showcasing some of the default color schemes, see [here](https://micro-editor.github.io).
+ 
+You can also check out the website for Micro at https://micro-editor.github.io.
+
+## Table of Contents
+
+- [Features](#features)
+- [Installation](#installation)
+  - [Prebuilt binaries](#pre-built-binaries)
+  - [Package Managers](#package-managers)
+  - [Building from source](#building-from-source)
+  - [Fully static binary](#fully-static-binary)
+  - [macOS terminal](#macos-terminal)
+  - [Linux clipboard support](#linux-clipboard-support)
+  - [Colors and syntax highlighting](#colors-and-syntax-highlighting)
+  - [Cygwin, Mingw, Plan9](#cygwin-mingw-plan9)
+- [Usage](#usage)
+- [Documentation and Help](#documentation-and-help)
+- [Contributing](#contributing)
+
+- - -
+
+## Features
+
+- Easy to use and install.
+- No dependencies or external files are needed — just the binary you can download further down the page.
+- Multiple cursors.
+- Common keybindings (<kbd>Ctrl-s</kbd>, <kbd>Ctrl-c</kbd>, <kbd>Ctrl-v</kbd>, <kbd>Ctrl-z</kbd>, …).
+  - Keybindings can be rebound to your liking.
+- Sane defaults.
+  - You shouldn't have to configure much out of the box (and it is extremely easy to configure).
+- Splits and tabs.
+- nano-like menu to help you remember the keybindings.
+- Extremely good mouse support.
+  - This means mouse dragging to create a selection, double click to select by word, and triple click to select by line.
+- Cross-platform (it should work on all the platforms Go runs on).
+  - Note that while Windows is supported Mingw/Cygwin is not (see below).
+- Plugin system (plugins are written in Lua).
+  - micro has a built-in plugin manager to automatically install, remove, and update plugins.
+- Built-in diff gutter.
+- Simple autocompletion.
+- Persistent undo.
+- Automatic linting and error notifications.
+- Syntax highlighting for over [130 languages](runtime/syntax).
+- Color scheme support.
+  - By default, micro comes with 16, 256, and true color themes.
+- True color support (set the `MICRO_TRUECOLOR` environment variable to 1 to enable it).
+- Copy and paste with the system clipboard.
+- Small and simple.
+- Easily configurable.
+- Macros.
+- Common editor features such as undo/redo, line numbers, Unicode support, soft wrapping, …
+
+## Installation
+
+To install micro, you can download a [prebuilt binary](https://github.com/zyedidia/micro/releases), or you can build it from source.
+
+If you want more information about ways to install micro, see this [wiki page](https://github.com/zyedidia/micro/wiki/Installing-Micro).
+
+Use `micro -version` to get the version information after installing. It is only guaranteed that you are installing the most recent
+stable version if you install from the prebuilt binaries, Homebrew, or Snap.
+
+A desktop entry file and man page can be found in the [assets/packaging](https://github.com/zyedidia/micro/tree/master/assets/packaging) directory.
+
+### Pre-built binaries
+
+Pre-built binaries are distributed with [releases](https://github.com/zyedidia/micro/releases).
+
+To uninstall micro, simply remove the binary, and the configuration directory at `~/.config/micro`.
+
+#### Quick-install script
+
+```bash
+curl https://getmic.ro | bash
+```
+
+The script will place the micro binary in the current directory. From there, you can move it to a directory on your path of your choosing (e.g. `sudo mv micro /usr/bin`). See its [GitHub repository](https://github.com/benweissmann/getmic.ro) for more information.
+
+#### Eget
+
+With [Eget](https://github.com/zyedidia/eget) installed, you can easily get a pre-built binary:
+
+```
+eget zyedidia/micro
+```
+
+Use `--tag VERSION` to download a specific tagged version.
+
+```
+eget --tag nightly zyedidia/micro # download the nightly version (compiled every day at midnight UTC)
+eget --tag v2.0.8 zyedidia/micro  # download version 2.0.8 rather than the latest release
+```
+
+You can install `micro` by adding `--to /usr/local/bin` to the `eget` command, or move the binary manually to a directory on your `$PATH` after the download completes.
+
+See [Eget](https://github.com/zyedidia/eget) for more information.
+
+### Package managers
+
+You can install micro using Homebrew on Mac:
+
+```
+brew install micro
+```
+
+**Note for Mac:** All micro keybindings use the control or alt (option) key, not the command
+key. By default, macOS terminals do not forward alt key events. To fix this, please see
+the section on [macOS terminals](https://github.com/zyedidia/micro#macos-terminal) further below.
+
+On Linux, you can install micro through [snap](https://snapcraft.io/docs/core/install)
+
+```
+snap install micro --classic
+```
+
+Micro is also available through other package managers on Linux such dnf, AUR, Nix, and package managers
+for other operating systems. These packages are not guaranteed to be up-to-date.
+
+<!-- * `apt install micro` (Ubuntu 20.04 `focal`, and Debian `unstable | testing | buster-backports`). At the moment, this package (2.0.1-1) is outdated and has a known bug where debug mode is enabled. -->
+
+* Linux: Available in distro-specific package managers.
+    * `dnf install micro` (Fedora).
+    * `pacman -S micro` (Arch Linux).
+    * `emerge app-editors/micro` (Gentoo).
+    * `eopkg install micro` (Solus).
+    * `pacstall -I micro` (Pacstall).
+    * See [wiki](https://github.com/zyedidia/micro/wiki/Installing-Micro) for details about CRUX, Termux.
+* Windows: [Chocolatey](https://chocolatey.org) and [Scoop](https://github.com/lukesampson/scoop).
+    * `choco install micro`.
+    * `scoop install micro`.
+* OpenBSD: Available in the ports tree and also available as a binary package.
+    * `pkd_add -v micro`.
+* NetBSD, macOS, Linux, Illumos, etc. with [pkgsrc](http://www.pkgsrc.org/)-current:
+    * `pkg_add micro`
+* macOS with [MacPorts](https://www.macports.org):
+    * `sudo port install micro`
+
+**Note for Linux desktop environments:**
+
+For interfacing with the local system clipboard, the following tools need to be installed:
+* For X11 `xclip` or `xsel`
+* For [Wayland](https://wayland.freedesktop.org/) `wl-clipboard`
+
+Without these tools installed, micro will use an internal clipboard for copy and paste, but it won't be accessible to external applications.
+
+### Building from source
+
+If your operating system does not have a binary release, but does run Go, you can build from source.
+
+Make sure that you have Go version 1.16 or greater and Go modules are enabled.
+
+```
+git clone https://github.com/zyedidia/micro
+cd micro
+make build
+sudo mv micro /usr/local/bin # optional
+```
+
+The binary will be placed in the current directory and can be moved to
+anywhere you like (for example `/usr/local/bin`).
+
+The command `make install` will install the binary to `$GOPATH/bin` or `$GOBIN`.
+
+You can install directly with `go get` (`go get github.com/zyedidia/micro/cmd/micro`) but this isn't
+recommended because it doesn't build micro with version information (necessary for the plugin manager),
+and doesn't disable debug mode.
+
+### Fully static binary
+
+By default, the micro binary will dynamically link with core system libraries (this is generally
+recommended for security and portability). However, there is a fully static prebuilt binary that
+is provided for amd64 as `linux-static.tar.gz`, and to build a fully static binary from source, run
+
+```
+CGO_ENABLED=0 make build
+```
+
+### macOS terminal
+
+If you are using macOS, you should consider using [iTerm2](http://iterm2.com/) instead of the default terminal (Terminal.app). The iTerm2 terminal has much better mouse support as well as better handling of key events. For best keybinding behavior, choose `xterm defaults` under `Preferences->Profiles->Keys->Presets...`, and select `Esc+` for `Left Option Key` in the same menu. The newest versions also support true color.
+
+If you still insist on using the default Mac terminal, be sure to set `Use Option key as Meta key` under
+`Preferences->Profiles->Keyboard` to use <kbd>option</kbd> as <kbd>alt</kbd>.
+
+### Colors and syntax highlighting
+
+If you open micro and it doesn't seem like syntax highlighting is working, this is probably because
+you are using a terminal which does not support 256 color mode. Try changing the color scheme to `simple`
+by pressing <kbd>Ctrl-e</kbd> in micro and typing `set colorscheme simple`.
+
+If you are using the default Ubuntu terminal, to enable 256 make sure your `TERM` variable is set
+to `xterm-256color`.
+
+Many of the Windows terminals don't support more than 16 colors, which means
+that micro's default color scheme won't look very good. You can either set
+the color scheme to `simple`, or download and configure a better terminal emulator
+than the Windows default.
+
+### Cygwin, Mingw, Plan9
+
+Cygwin, Mingw, and Plan9 are unfortunately not officially supported. In Cygwin and Mingw, micro will often work when run using
+the `winpty` utility:
+
+```
+winpty micro.exe ...
+```
+
+Micro uses the amazing [tcell library](https://github.com/gdamore/tcell), but this
+means that micro is restricted to the platforms tcell supports. As a result, micro does not support
+Plan9, and Cygwin (although this may change in the future). Micro also doesn't support NaCl (which is deprecated anyway).
+
+## Usage
+
+Once you have built the editor, start it by running `micro path/to/file.txt` or `micro` to open an empty buffer.
+
+micro also supports creating buffers from `stdin`:
+
+```sh
+ip a | micro
+```
+
+You can move the cursor around with the arrow keys and mouse.
+
+You can also use the mouse to manipulate the text. Simply clicking and dragging
+will select text. You can also double click to enable word selection, and triple
+click to enable line selection.
+
+## Documentation and Help
+
+micro has a built-in help system which you can access by pressing <kbd>Ctrl-e</kbd> and typing `help`. Additionally, you can
+view the help files here:
+
+- [main help](https://github.com/zyedidia/micro/tree/master/runtime/help/help.md)
+- [keybindings](https://github.com/zyedidia/micro/tree/master/runtime/help/keybindings.md)
+- [commands](https://github.com/zyedidia/micro/tree/master/runtime/help/commands.md)
+- [colors](https://github.com/zyedidia/micro/tree/master/runtime/help/colors.md)
+- [options](https://github.com/zyedidia/micro/tree/master/runtime/help/options.md)
+- [plugins](https://github.com/zyedidia/micro/tree/master/runtime/help/plugins.md)
+
+I also recommend reading the [tutorial](https://github.com/zyedidia/micro/tree/master/runtime/help/tutorial.md) for
+a brief introduction to the more powerful configuration features micro offers.
+
+There is also an unofficial Discord, which you can join at https://discord.gg/nhWR6armnR.
+
+## Contributing
+
+If you find any bugs, please report them! I am also happy to accept pull requests from anyone.
+
+You can use the [GitHub issue tracker](https://github.com/zyedidia/micro/issues)
+to report bugs, ask questions, or suggest new features.
+
+For a more informal setting to discuss the editor, you can join the [Gitter chat](https://gitter.im/zyedidia/micro) or the [Discord](https://discord.gg/nhWR6armnR). You can also use the [Discussions](https://github.com/zyedidia/micro/discussions) section on Github for a forum-like setting or for Q&A.
+
+Sometimes I am unresponsive, and I apologize! If that happens, please ping me.

auth-file

+#comment
+user3:pass3:0:0:
+user4:pass4:0:0:
\ No newline at end of file

bash_autocomplete

+: ${PROG:=$(basename ${BASH_SOURCE})}
+
+_cli_bash_autocomplete() {
+  if [[ "${COMP_WORDS[0]}" != "source" ]]; then
+    local cur opts base
+    COMPREPLY=()
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    if [[ "$cur" == "-"* ]]; then
+      opts=$( ${COMP_WORDS[@]:0:$COMP_CWORD} ${cur} --generate-bash-completion )
+    else
+      opts=$( ${COMP_WORDS[@]:0:$COMP_CWORD} --generate-bash-completion )
+    fi
+    COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+    return 0
+  fi
+}
+
+complete -o bashdefault -o default -o nospace -F _cli_bash_autocomplete $PROG
+unset PROG

direct

+07073.com
+10010.com
+100ye.com
+114la.com
+115.com
+120ask.com
+126.com
+126.net
+1616.net
+163.com
+17173.com
+1778.com
+178.com
+17u.com
+19lou.com
+1o26.com
+1ting.com
+21cn.com
+2345.com
+265.com
+265g.com
+28.com
+28tui.com
+2hua.com
+2mdn.net
+315che.com
+3366.com
+360buy.com
+360buyimg.com
+360doc.com
+36kr.com
+39.net
+3dmgame.com
+4399.com
+4738.com
+500wan.com
+51.com
+51.la
+5173.com
+51auto.com
+51buy.com
+51cto.com
+51fanli.com
+51job.com
+52kmh.com
+52pk.net
+52tlbb.com
+53kf.com
+55bbs.com
+55tuan.com
+56.com
+58.com
+591hx.com
+5d6d.net
+61.com
+70e.com
+777wyx.com
+778669.com
+7c.com
+7k7k.com
+88db.com
+91.com
+99bill.com
+a135.net
+abang.com
+abchina.com
+ad1111.com
+admin5.com
+adnxs.com
+adobe.com
+adroll.com
+ads8.com
+adsame.com
+adsonar.com
+adtechus.com
+aibang.com
+aifang.com
+aili.com
+aipai.com
+aizhan.com
+ali213.net
+alibaba.com
+alicdn.com
+aliexpress.com
+alimama.com
+alipay.com
+alipayobjects.com
+alisoft.com
+alivv.com
+aliyun.com
+allyes.com
+amazon.com
+anjuke.com
+anzhi.com
+aol.com
+apple.com
+arpg2.com
+atdmt.com
+b2b168.com
+babytree.com
+baidu.com
+baihe.com
+baixing.com
+bankcomm.com
+baomihua.com
+bdimg.com
+bdstatic.com
+bendibao.com
+betrad.com
+bilibili.tv
+bing.com
+bitauto.com
+blog.163.com
+blogchina.com
+blueidea.com
+bluekai.com
+booksky.org
+caixin.com
+ccb.com
+ccidnet.com
+cctv*.com
+china.com
+chinabyte.com
+chinahr.com
+chinanews.com
+chinaw3.com
+chinaz.com
+chuangelm.com
+ci123.com
+cmbchina.com
+cnbeta.com
+cnblogs.com
+cncn.com
+cnhubei.com
+cnki.net
+cnmo.com
+cnxad.com
+cnzz.com
+cocoren.com
+compete.com
+comsenz.com
+coo8.com
+cqnews.net
+crsky.com
+csdn.net
+ct10000.com
+ctrip.com
+dangdang.com
+daqi.com
+dayoo.com
+dbank.com
+ddmap.com
+dedecms.com
+dh818.com
+diandian.com
+dianping.com
+discuz.net
+doc88.com
+docin.com
+donews.com
+dospy.com
+douban.com
+douban.fm
+doubleclick.com
+doubleclick.net
+duba.net
+duote.com
+duowan.com
+dzwww.com
+eastday.com
+eastmoney.com
+ebay.com
+elong.com
+ename.net
+etao.com
+exam8.com
+eye.rs
+fantong.com
+fastcdn.com
+fblife.com
+fengniao.com
+fenzhi.com
+flickr.com
+fobshanghai.com
+ftuan.com
+funshion.com
+fx120.net
+game3737.com
+gamersky.com
+gamestlbb.com
+gamesville.com
+ganji.com
+gfan.com
+gongchang.com
+google-analytics.com
+gougou.com
+gtimg.com
+hao123.com
+haodf.com
+harrenmedianetwork.com
+hc360.com
+hefei.cc
+hf365.com
+hiapk.com
+hichina.com
+homeinns.com
+hotsales.net
+house365.com
+huaban.com
+huanqiu.com
+hudong.com
+hupu.com
+iask.com
+iciba.com
+icson.com
+ifeng.com
+iloveyouxi.com
+im286.com
+imanhua.com
+img.cctvpic.com
+imrworldwide.com
+invitemedia.com
+ip138.com
+ipinyou.com
+iqilu.com
+iqiyi.com
+irs01.com
+irs01.net
+it168.com
+iteye.com
+iyaya.com
+jb51.net
+jiathis.com
+jiayuan.com
+jing.fm
+jinti.com
+jqw.com
+jumei.com
+jxedt.com
+jysq.net
+kaixin001.com
+kandian.com
+kdnet.net
+kimiss.com
+ku6.com
+ku6cdn.com
+ku6img.com
+kuaidi100.com 
+kugou.com
+l99.com
+lady8844.com
+lafaso.com
+lashou.com
+legolas-media.com
+lehecai.com
+leho.com
+letv.com
+liebiao.com
+lietou.com
+linezing.com
+linkedin.com
+live.com
+longhoo.net
+lusongsong.com
+lxdns.com
+lycos.com 
+lygo.com 
+m18.com
+m1905.com
+made-in-china.com
+makepolo.com
+mangocity.com
+manzuo.com
+mapbar.com
+mathtag.com
+mediaplex.com
+mediav.com
+meilele.com
+meilishuo.com
+meishichina.com
+meituan.com
+meizu.com
+miaozhen.com
+microsoft.com
+miercn.com
+mlt01.com
+mmcdn.cn
+mmstat.com
+mnwan.com
+mogujie.com
+mookie1.com
+moonbasa.com
+mop.com
+mosso.com
+mplife.com
+msn.com
+mtime.com
+mumayi.com
+mydrivers.com
+net114.com
+netease.com
+newsmth.net
+nipic.com
+nowec.com
+nuomi.com
+oadz.com
+oeeee.com
+onetad.com
+onlinedown.net
+onlylady.com
+oschina.net
+otwan.com
+paipai.com
+paypal.com
+pchome.net
+pcpop.com
+pengyou.com
+php100.com
+phpwind.net
+pingan.com
+pixlr.com 
+pp.cc
+ppstream.com
+pptv.com
+ptlogin2.qq.com
+pubmatic.com
+q150.com
+qianlong.com
+qidian.com
+qingdaonews.com
+qire123.com
+qiushibaike.com
+qiyou.com
+qjy168.com
+qq.com
+qq937.com
+qstatic.com
+quantserve.com
+qunar.com
+rakuten.co.jp
+readnovel.com
+renren.com
+rtbidder.net
+scanscout.com
+scorecardresearch.com 
+sdo.com
+seowhy.com
+serving-sys.com 
+sf-express.com
+shangdu.com
+si.kz
+sina.com
+sinahk.net
+sinajs.com 
+smzdm.com
+snyu.com
+sodu.org
+sogou.com
+sohu.com
+soku.com
+sootoo.com
+soso.com
+soufun.com
+sourceforge.net
+staticsdo.com
+stockstar.com
+sttlbb.com
+suning.com
+szhome.com
+sznews.com
+tangdou.com
+tanx.com
+tao123.com
+taobao.com
+taobaocdn.com
+tbcdn.cn
+tdimg.com
+tenpay.com
+tgbus.com
+theplanet.com
+thethirdmedia.com
+tiancity.com
+tianji.com
+tiao8.info
+tiexue.net
+titan24.com
+tmall.com
+tom.com
+toocle.com
+tremormedia.com
+tuan800.com
+tudou.com
+tudouui.com
+tui18.com
+tuniu.com
+twcczhu.com
+u17.com
+ucjoy.com
+ulink.cc
+uniontoufang.com
+up2c.com
+uuu9.com
+uuzu.com
+vancl.com
+verycd.com
+vipshop.com
+vizu.com
+vjia.com
+weibo.com
+weiphone.com
+west263.com
+whlongda.com
+wrating.com 
+wumii.com
+xiami.com
+xiaomi.com
+xiazaiba.com
+xici.net
+xinhuanet.com
+xinnet.com
+xitek.com
+xiu.com
+xunlei.com
+xyxy.net
+yahoo.co.jp
+yahoo.com
+yaolan.com
+yesky.com
+yieldmanager.com
+yihaodian.com
+yingjiesheng.com
+yinyuetai.com
+yiqifa.com
+ykimg.com
+ynet.com
+yoka.com
+yolk7.com
+youboy.com
+youdao.com
+yougou.com
+youku.com
+youshang.com
+yupoo.com
+yxlady.com
+yyets.com
+zhaodao123.com
+zhaopin.com
+zhenai.com
+zhibo8.cc
+zhihu.com
+zhubajie.com
+zongheng.com
+zoosnet.net
+zqgame.com
+ztgame.com
+zx915.com
\ No newline at end of file

frpc.ini

+[common]
+server_addr = 127.0.0.1
+server_port = 7000
+
+[ssh]
+type = tcp
+local_ip = 127.0.0.1
+local_port = 22
+remote_port = 6000

frpc_full.ini

+# [common] is integral section
+[common]
+# A literal address or host name for IPv6 must be enclosed
+# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
+# For single "server_addr" field, no need square brackets, like "server_addr = ::".
+server_addr = 0.0.0.0
+server_port = 7000
+
+# The maximum amount of time a dial to server will wait for a connect to complete. Default value is 10 seconds.
+# dial_server_timeout = 10
+
+# dial_server_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
+# If negative, keep-alive probes are disabled.
+# dial_server_keepalive = 7200
+
+# if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set http_proxy here or in global environment variables
+# it only works when protocol is tcp
+# http_proxy = http://user:passwd@192.168.1.128:8080
+# http_proxy = socks5://user:passwd@192.168.1.128:1080
+# http_proxy = ntlm://user:passwd@192.168.1.128:2080
+
+# console or real logFile path like ./frpc.log
+log_file = ./frpc.log
+
+# trace, debug, info, warn, error
+log_level = info
+
+log_max_days = 3
+
+# disable log colors when log_file is console, default is false
+disable_log_color = false
+
+# for authentication, should be same as your frps.ini
+# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
+authenticate_heartbeats = false
+
+# authenticate_new_work_conns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
+authenticate_new_work_conns = false
+
+# auth token
+token = 12345678
+
+authentication_method = 
+
+# oidc_client_id specifies the client ID to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
+# By default, this value is "".
+oidc_client_id =
+
+# oidc_client_secret specifies the client secret to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
+# By default, this value is "".
+oidc_client_secret =
+
+# oidc_audience specifies the audience of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
+oidc_audience =
+
+# oidc_scope specifies the permisssions of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
+oidc_scope =
+
+# oidc_token_endpoint_url specifies the URL which implements OIDC Token Endpoint.
+# It will be used to get an OIDC token if AuthenticationMethod == "oidc". By default, this value is "".
+oidc_token_endpoint_url =
+
+# oidc_additional_xxx specifies additional parameters to be sent to the OIDC Token Endpoint.
+# For example, if you want to specify the "audience" parameter, you can set as follow.
+# frp will add "audience=<value>" "var1=<value>" to the additional parameters.
+# oidc_additional_audience = https://dev.auth.com/api/v2/
+# oidc_additional_var1 = foobar
+
+# set admin address for control frpc's action by http api such as reload
+admin_addr = 127.0.0.1
+admin_port = 7400
+admin_user = admin
+admin_pwd = admin
+# Admin assets directory. By default, these assets are bundled with frpc.
+# assets_dir = ./static
+
+# connections will be established in advance, default value is zero
+pool_count = 5
+
+# if tcp stream multiplexing is used, default is true, it must be same with frps
+# tcp_mux = true
+
+# specify keep alive interval for tcp mux.
+# only valid if tcp_mux is true.
+# tcp_mux_keepalive_interval = 60
+
+# your proxy name will be changed to {user}.{proxy}
+user = your_name
+
+# decide if exit program when first login failed, otherwise continuous relogin to frps
+# default is true
+login_fail_exit = true
+
+# communication protocol used to connect to server
+# supports tcp, kcp, quic and websocket now, default is tcp
+protocol = tcp
+
+# set client binding ip when connect server, default is empty.
+# only when protocol = tcp or websocket, the value will be used.
+connect_server_local_ip = 0.0.0.0
+
+# quic protocol options
+# quic_keepalive_period = 10
+# quic_max_idle_timeout = 30
+# quic_max_incoming_streams = 100000
+
+# if tls_enable is true, frpc will connect frps by tls
+tls_enable = true
+
+# tls_cert_file = client.crt
+# tls_key_file = client.key
+# tls_trusted_ca_file = ca.crt
+# tls_server_name = example.com
+
+# specify a dns server, so frpc will use this instead of default one
+# dns_server = 8.8.8.8
+
+# proxy names you want to start separated by ','
+# default is empty, means all proxies
+# start = ssh,dns
+
+# heartbeat configure, it's not recommended to modify the default value
+# The default value of heartbeat_interval is 10 and heartbeat_timeout is 90. Set negative value
+# to disable it.
+# heartbeat_interval = 30
+# heartbeat_timeout = 90
+
+# additional meta info for client
+meta_var1 = 123
+meta_var2 = 234
+
+# specify udp packet size, unit is byte. If not set, the default value is 1500.
+# This parameter should be same between client and server.
+# It affects the udp and sudp proxy.
+udp_packet_size = 1500
+
+# include other config files for proxies.
+# includes = ./confd/*.ini
+
+# By default, frpc will connect frps with first custom byte if tls is enabled.
+# If DisableCustomTLSFirstByte is true, frpc will not send that custom byte.
+disable_custom_tls_first_byte = false
+
+# Enable golang pprof handlers in admin listener.
+# Admin port must be set first.
+pprof_enable = false
+
+# 'ssh' is the unique proxy name
+# if user in [common] section is not empty, it will be changed to {user}.{proxy} such as 'your_name.ssh'
+[ssh]
+# tcp | udp | http | https | stcp | xtcp, default is tcp
+type = tcp
+local_ip = 127.0.0.1
+local_port = 22
+# limit bandwidth for this proxy, unit is KB and MB
+bandwidth_limit = 1MB
+# true or false, if true, messages between frps and frpc will be encrypted, default is false
+use_encryption = false
+# if true, message will be compressed
+use_compression = false
+# remote port listen by frps
+remote_port = 6001
+# frps will load balancing connections for proxies in same group
+group = test_group
+# group should have same group key
+group_key = 123456
+# enable health check for the backend service, it support 'tcp' and 'http' now
+# frpc will connect local service's port to detect it's healthy status
+health_check_type = tcp
+# health check connection timeout
+health_check_timeout_s = 3
+# if continuous failed in 3 times, the proxy will be removed from frps
+health_check_max_failed = 3
+# every 10 seconds will do a health check
+health_check_interval_s = 10
+# additional meta info for each proxy
+meta_var1 = 123
+meta_var2 = 234
+
+[ssh_random]
+type = tcp
+local_ip = 127.0.0.1
+local_port = 22
+# if remote_port is 0, frps will assign a random port for you
+remote_port = 0
+
+# if you want to expose multiple ports, add 'range:' prefix to the section name
+# frpc will generate multiple proxies such as 'tcp_port_6010', 'tcp_port_6011' and so on.
+[range:tcp_port]
+type = tcp
+local_ip = 127.0.0.1
+local_port = 6010-6020,6022,6024-6028
+remote_port = 6010-6020,6022,6024-6028
+use_encryption = false
+use_compression = false
+
+[dns]
+type = udp
+local_ip = 114.114.114.114
+local_port = 53
+remote_port = 6002
+use_encryption = false
+use_compression = false
+
+[range:udp_port]
+type = udp
+local_ip = 127.0.0.1
+local_port = 6010-6020
+remote_port = 6010-6020
+use_encryption = false
+use_compression = false
+
+# Resolve your domain names to [server_addr] so you can use http://web01.yourdomain.com to browse web01 and http://web02.yourdomain.com to browse web02
+[web01]
+type = http
+local_ip = 127.0.0.1
+local_port = 80
+use_encryption = false
+use_compression = true
+# http username and password are safety certification for http protocol
+# if not set, you can access this custom_domains without certification
+http_user = admin
+http_pwd = admin
+# if domain for frps is frps.com, then you can access [web01] proxy by URL http://web01.frps.com
+subdomain = web01
+custom_domains = web01.yourdomain.com
+# locations is only available for http type
+locations = /,/pic
+# route requests to this service if http basic auto user is abc
+# route_by_http_user = abc
+host_header_rewrite = example.com
+# params with prefix "header_" will be used to update http request headers
+header_X-From-Where = frp
+health_check_type = http
+# frpc will send a GET http request '/status' to local http service
+# http service is alive when it return 2xx http response code
+health_check_url = /status
+health_check_interval_s = 10
+health_check_max_failed = 3
+health_check_timeout_s = 3
+
+[web02]
+type = https
+local_ip = 127.0.0.1
+local_port = 8000
+use_encryption = false
+use_compression = false
+subdomain = web01
+custom_domains = web02.yourdomain.com
+# if not empty, frpc will use proxy protocol to transfer connection info to your local service
+# v1 or v2 or empty
+proxy_protocol_version = v2
+
+[plugin_unix_domain_socket]
+type = tcp
+remote_port = 6003
+# if plugin is defined, local_ip and local_port is useless
+# plugin will handle connections got from frps
+plugin = unix_domain_socket
+# params with prefix "plugin_" that plugin needed
+plugin_unix_path = /var/run/docker.sock
+
+[plugin_http_proxy]
+type = tcp
+remote_port = 6004
+plugin = http_proxy
+plugin_http_user = abc
+plugin_http_passwd = abc
+
+[plugin_socks5]
+type = tcp
+remote_port = 6005
+plugin = socks5
+plugin_user = abc
+plugin_passwd = abc
+
+[plugin_static_file]
+type = tcp
+remote_port = 6006
+plugin = static_file
+plugin_local_path = /var/www/blog
+plugin_strip_prefix = static
+plugin_http_user = abc
+plugin_http_passwd = abc
+
+[plugin_https2http]
+type = https
+custom_domains = test.yourdomain.com
+plugin = https2http
+plugin_local_addr = 127.0.0.1:80
+plugin_crt_path = ./server.crt
+plugin_key_path = ./server.key
+plugin_host_header_rewrite = 127.0.0.1
+plugin_header_X-From-Where = frp
+
+[plugin_https2https]
+type = https
+custom_domains = test.yourdomain.com
+plugin = https2https
+plugin_local_addr = 127.0.0.1:443
+plugin_crt_path = ./server.crt
+plugin_key_path = ./server.key
+plugin_host_header_rewrite = 127.0.0.1
+plugin_header_X-From-Where = frp
+
+[plugin_http2https]
+type = http
+custom_domains = test.yourdomain.com
+plugin = http2https
+plugin_local_addr = 127.0.0.1:443
+plugin_host_header_rewrite = 127.0.0.1
+plugin_header_X-From-Where = frp
+
+[secret_tcp]
+# If the type is secret tcp, remote_port is useless
+# Who want to connect local port should deploy another frpc with stcp proxy and role is visitor
+type = stcp
+# sk used for authentication for visitors
+sk = abcdefg
+local_ip = 127.0.0.1
+local_port = 22
+use_encryption = false
+use_compression = false
+
+# user of frpc should be same in both stcp server and stcp visitor
+[secret_tcp_visitor]
+# frpc role visitor -> frps -> frpc role server
+role = visitor
+type = stcp
+# the server name you want to visitor
+server_name = secret_tcp
+sk = abcdefg
+# connect this address to visitor stcp server
+bind_addr = 127.0.0.1
+bind_port = 9000
+use_encryption = false
+use_compression = false
+
+[p2p_tcp]
+type = xtcp
+sk = abcdefg
+local_ip = 127.0.0.1
+local_port = 22
+use_encryption = false
+use_compression = false
+
+[p2p_tcp_visitor]
+role = visitor
+type = xtcp
+server_name = p2p_tcp
+sk = abcdefg
+bind_addr = 127.0.0.1
+bind_port = 9001
+use_encryption = false
+use_compression = false
+
+[tcpmuxhttpconnect]
+type = tcpmux
+multiplexer = httpconnect
+local_ip = 127.0.0.1
+local_port = 10701
+custom_domains = tunnel1
+# route_by_http_user = user1

frps.ini

+[common]
+bind_port = 7000

frps_full.ini

+# [common] is integral section
+[common]
+# A literal address or host name for IPv6 must be enclosed
+# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
+# For single "bind_addr" field, no need square brackets, like "bind_addr = ::".
+bind_addr = 0.0.0.0
+bind_port = 7000
+
+# udp port to help make udp hole to penetrate nat
+bind_udp_port = 7001
+
+# udp port used for kcp protocol, it can be same with 'bind_port'.
+# if not set, kcp is disabled in frps.
+kcp_bind_port = 7000
+
+# udp port used for quic protocol.
+# if not set, quic is disabled in frps.
+# quic_bind_port = 7002
+# quic protocol options
+# quic_keepalive_period = 10
+# quic_max_idle_timeout = 30
+# quic_max_incoming_streams = 100000
+
+# specify which address proxy will listen for, default value is same with bind_addr
+# proxy_bind_addr = 127.0.0.1
+
+# if you want to support virtual host, you must set the http port for listening (optional)
+# Note: http port and https port can be same with bind_port
+vhost_http_port = 80
+vhost_https_port = 443
+
+# response header timeout(seconds) for vhost http server, default is 60s
+# vhost_http_timeout = 60
+
+# tcpmux_httpconnect_port specifies the port that the server listens for TCP
+# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
+# requests on one single port. If it's not - it will listen on this value for
+# HTTP CONNECT requests. By default, this value is 0.
+# tcpmux_httpconnect_port = 1337
+
+# If tcpmux_passthrough is true, frps won't do any update on traffic.
+# tcpmux_passthrough = false
+
+# set dashboard_addr and dashboard_port to view dashboard of frps
+# dashboard_addr's default value is same with bind_addr
+# dashboard is available only if dashboard_port is set
+dashboard_addr = 0.0.0.0
+dashboard_port = 7500
+
+# dashboard user and passwd for basic auth protect
+dashboard_user = admin
+dashboard_pwd = admin
+
+# dashboard TLS mode
+dashboard_tls_mode = false
+# dashboard_tls_cert_file = server.crt
+# dashboard_tls_key_file = server.key
+
+# enable_prometheus will export prometheus metrics on {dashboard_addr}:{dashboard_port} in /metrics api.
+enable_prometheus = true
+
+# dashboard assets directory(only for debug mode)
+# assets_dir = ./static
+
+# console or real logFile path like ./frps.log
+log_file = ./frps.log
+
+# trace, debug, info, warn, error
+log_level = info
+
+log_max_days = 3
+
+# disable log colors when log_file is console, default is false
+disable_log_color = false
+
+# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
+detailed_errors_to_client = true
+
+# authentication_method specifies what authentication method to use authenticate frpc with frps.
+# If "token" is specified - token will be read into login message.
+# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
+authentication_method = token
+
+# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
+authenticate_heartbeats = false
+
+# AuthenticateNewWorkConns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
+authenticate_new_work_conns = false
+
+# auth token
+token = 12345678
+
+# oidc_issuer specifies the issuer to verify OIDC tokens with.
+# By default, this value is "".
+oidc_issuer =
+
+# oidc_audience specifies the audience OIDC tokens should contain when validated.
+# By default, this value is "".
+oidc_audience =
+
+# oidc_skip_expiry_check specifies whether to skip checking if the OIDC token is expired.
+# By default, this value is false.
+oidc_skip_expiry_check = false
+
+# oidc_skip_issuer_check specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
+# By default, this value is false.
+oidc_skip_issuer_check = false
+
+# heartbeat configure, it's not recommended to modify the default value
+# the default value of heartbeat_timeout is 90. Set negative value to disable it.
+# heartbeat_timeout = 90
+
+# user_conn_timeout configure, it's not recommended to modify the default value
+# the default value of user_conn_timeout is 10
+# user_conn_timeout = 10
+
+# only allow frpc to bind ports you list, if you set nothing, there won't be any limit
+allow_ports = 2000-3000,3001,3003,4000-50000
+
+# pool_count in each proxy will change to max_pool_count if they exceed the maximum value
+max_pool_count = 5
+
+# max ports can be used for each client, default value is 0 means no limit
+max_ports_per_client = 0
+
+# tls_only specifies whether to only accept TLS-encrypted connections. By default, the value is false.
+tls_only = false
+
+# tls_cert_file = server.crt
+# tls_key_file = server.key
+# tls_trusted_ca_file = ca.crt
+
+# if subdomain_host is not empty, you can set subdomain when type is http or https in frpc's configure file
+# when subdomain is test, the host used by routing is test.frps.com
+subdomain_host = frps.com
+
+# if tcp stream multiplexing is used, default is true
+# tcp_mux = true
+
+# specify keep alive interval for tcp mux.
+# only valid if tcp_mux is true.
+# tcp_mux_keepalive_interval = 60
+
+# tcp_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
+# If negative, keep-alive probes are disabled.
+# tcp_keepalive = 7200
+
+# custom 404 page for HTTP requests
+# custom_404_page = /path/to/404.html
+
+# specify udp packet size, unit is byte. If not set, the default value is 1500.
+# This parameter should be same between client and server.
+# It affects the udp and sudp proxy.
+udp_packet_size = 1500
+
+# Enable golang pprof handlers in dashboard listener.
+# Dashboard port must be set first
+pprof_enable = false
+
+[plugin.user-manager]
+addr = 127.0.0.1:9000
+path = /handler
+ops = Login
+
+[plugin.port-manager]
+addr = 127.0.0.1:9001
+path = /handler
+ops = NewProxy

hosts

+# domain support wildcard and comment line stared with #
+# **.google.com match all domain subfix with .google.com
+# *.youtube.com only math level 3 sub domain of .youtube.com
+
+# example
+10.0.2.2  **.a.com
+10.0.2.2  *.c.com
\ No newline at end of file

ip.allow

+#client ip whitelist demo
+192.168.1.1
+192.168.*.*
+192.168.1?.*
\ No newline at end of file

ip.deny

+#client ip blacklist demo
+192.168.1.1
+192.168.*.*
+192.168.1?.*
\ No newline at end of file

ip.limit

+#Format: IP:CONNS:RATE:UPSTREAM
+#127.0.0.1:2:0:http://127.0.0.1:3100?parent-type=tcp
\ No newline at end of file