[Build] Only build 9.0a for scaled_mm and sparse kernels (#12339)

Signed-off-by: Lucas Wilkinson <lwilkinson@neuralmagic.com>

CMakeLists.txt

@@ -275,7 +275,7 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   # Only build Marlin kernels if we are building for at least some compatible archs.
   # Keep building Marlin for 9.0 as there are some group sizes and shapes that
   # are not supported by Machete yet.
-  cuda_archs_loose_intersection(MARLIN_ARCHS "8.0;8.6;8.7;8.9;9.0" ${CUDA_ARCHS})
+  cuda_archs_loose_intersection(MARLIN_ARCHS "8.0;8.6;8.7;8.9;9.0" "${CUDA_ARCHS}")
   if (MARLIN_ARCHS)
     set(MARLIN_SRCS
        "csrc/quantization/fp8/fp8_marlin.cu"
@@ -296,8 +296,8 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   endif()
 
   # The cutlass_scaled_mm kernels for Hopper (c3x, i.e. CUTLASS 3.x) require
-  # CUDA 12.0 or later (and only work on Hopper, 9.0/9.0a for now).
-  cuda_archs_loose_intersection(SCALED_MM_3X_ARCHS "9.0;9.0a" "${CUDA_ARCHS}")
+  # CUDA 12.0 or later (and only work on Hopper, 9.0a for now).
+  cuda_archs_loose_intersection(SCALED_MM_3X_ARCHS "9.0a" "${CUDA_ARCHS}")
   if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER 12.0 AND SCALED_MM_3X_ARCHS)
     set(SRCS "csrc/quantization/cutlass_w8a8/scaled_mm_c3x.cu")
     set_gencode_flags_for_srcs(
@@ -351,7 +351,7 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   # 2:4 Sparse Kernels
 
   # The 2:4 sparse kernels cutlass_scaled_sparse_mm and cutlass_compressor
-  # require CUDA 12.2 or later (and only work on Hopper, 9.0/9.0a for now).
+  # require CUDA 12.2 or later (and only work on Hopper, 9.0a for now).
   if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER 12.2 AND SCALED_MM_3X_ARCHS)
     set(SRCS "csrc/sparse/cutlass/sparse_compressor_c3x.cu"
              "csrc/sparse/cutlass/sparse_scaled_mm_c3x.cu")

cmake/utils.cmake

@@ -259,7 +259,7 @@ endmacro()
 #  in `SRC_CUDA_ARCHS` that is less or equal to the version in `TGT_CUDA_ARCHS`.
 # We have special handling for 9.0a, if 9.0a is in `SRC_CUDA_ARCHS` and 9.0 is
 #  in `TGT_CUDA_ARCHS` then we should remove 9.0a from `SRC_CUDA_ARCHS` and add
-#  9.0a to the result. 
+#  9.0a to the result (and remove 9.0 from TGT_CUDA_ARCHS). 
 # The result is stored in `OUT_CUDA_ARCHS`.
 #
 # Example:
@@ -270,34 +270,47 @@ endmacro()
 #
 function(cuda_archs_loose_intersection OUT_CUDA_ARCHS SRC_CUDA_ARCHS TGT_CUDA_ARCHS)
   list(REMOVE_DUPLICATES SRC_CUDA_ARCHS)
+  set(TGT_CUDA_ARCHS_ ${TGT_CUDA_ARCHS})
 
   # if 9.0a is in SRC_CUDA_ARCHS and 9.0 is in CUDA_ARCHS then we should
   # remove 9.0a from SRC_CUDA_ARCHS and add 9.0a to _CUDA_ARCHS
   set(_CUDA_ARCHS)
   if ("9.0a" IN_LIST SRC_CUDA_ARCHS)
     list(REMOVE_ITEM SRC_CUDA_ARCHS "9.0a")
-    if ("9.0" IN_LIST TGT_CUDA_ARCHS)
+    if ("9.0" IN_LIST TGT_CUDA_ARCHS_)
+      list(REMOVE_ITEM TGT_CUDA_ARCHS_ "9.0")
       set(_CUDA_ARCHS "9.0a")
     endif()
   endif()
 
   list(SORT SRC_CUDA_ARCHS COMPARE NATURAL ORDER ASCENDING)
 
-  # for each ARCH in CUDA_ARCHS find the highest arch in SRC_CUDA_ARCHS that is 
-  # less or eqault to ARCH
-  foreach(_ARCH ${CUDA_ARCHS})
-  set(_TMP_ARCH)
-  foreach(_SRC_ARCH ${SRC_CUDA_ARCHS})
-    if (_SRC_ARCH VERSION_LESS_EQUAL _ARCH)
-      set(_TMP_ARCH ${_SRC_ARCH})
-    else()
-      break()
+  # for each ARCH in TGT_CUDA_ARCHS find the highest arch in SRC_CUDA_ARCHS that
+  # is less or equal to ARCH (but has the same major version since SASS binary
+  # compatibility is only forward compatible within the same major version).
+  foreach(_ARCH ${TGT_CUDA_ARCHS_})
+    set(_TMP_ARCH)
+    # Extract the major version of the target arch
+    string(REGEX REPLACE "^([0-9]+)\\..*$" "\\1" TGT_ARCH_MAJOR "${_ARCH}")
+    foreach(_SRC_ARCH ${SRC_CUDA_ARCHS})
+      # Extract the major version of the source arch
+      string(REGEX REPLACE "^([0-9]+)\\..*$" "\\1" SRC_ARCH_MAJOR "${_SRC_ARCH}")
+      # Check major-version match AND version-less-or-equal
+      if (_SRC_ARCH VERSION_LESS_EQUAL _ARCH)
+        if (SRC_ARCH_MAJOR STREQUAL TGT_ARCH_MAJOR)
+          set(_TMP_ARCH "${_SRC_ARCH}")
+        endif()
+      else()
+        # If we hit a version greater than the target, we can break
+        break()
+      endif()
+    endforeach()
+
+    # If we found a matching _TMP_ARCH, append it to _CUDA_ARCHS
+    if (_TMP_ARCH)
+      list(APPEND _CUDA_ARCHS "${_TMP_ARCH}")
     endif()
   endforeach()
-  if (_TMP_ARCH)
-    list(APPEND _CUDA_ARCHS ${_TMP_ARCH})
-  endif()
-  endforeach()
 
   list(REMOVE_DUPLICATES _CUDA_ARCHS)
   set(${OUT_CUDA_ARCHS} ${_CUDA_ARCHS} PARENT_SCOPE)