README.md

<!--
SPDX-FileCopyrightText: Copyright (c) 2025-2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
SPDX-License-Identifier: Apache-2.0

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->

# Deploying Dynamo on Kubernetes

High-level guide to Dynamo Kubernetes deployments. Start here, then dive into specific guides.

## Important Terminology

**Kubernetes Namespace**: The K8s namespace where your DynamoGraphDeployment resource is created.
- Used for: Resource isolation, RBAC, organizing deployments
- Example: `dynamo-system`, `team-a-namespace`

**Dynamo Namespace**: The logical namespace used by Dynamo components for [service discovery](/docs/kubernetes/service_discovery.md).
- Used for: Runtime component communication, service discovery
- Specified in: `.spec.services.<ServiceName>.dynamoNamespace` field
- Example: `my-llm`, `production-model`, `dynamo-dev`

These are independent. A single Kubernetes namespace can host multiple Dynamo namespaces, and vice versa.

## Prerequisites

Before you begin, ensure you have the following tools installed:

| Tool | Minimum Version | Installation Guide |
|------|-----------------|-------------------|
| **kubectl** | v1.24+ | [Install kubectl](https://kubernetes.io/docs/tasks/tools/#kubectl) |
| **Helm** | v3.0+ | [Install Helm](https://helm.sh/docs/intro/install/) |

Verify your installation:
```bash
kubectl version --client  # Should show v1.24+
helm version              # Should show v3.0+
```

For detailed installation instructions, see the [Prerequisites section](/docs/kubernetes/installation_guide.md#prerequisites) in the Installation Guide.

## Pre-deployment Checks

Before deploying the platform, run the pre-deployment checks to ensure the cluster is ready:

```bash
./deploy/pre-deployment/pre-deployment-check.sh
```

This validates kubectl connectivity, StorageClass configuration, and GPU availability. See [pre-deployment checks](/deploy/pre-deployment/README.md) for more details.

## 1. Install Platform First

```bash
# 1. Set environment
export NAMESPACE=dynamo-system
export RELEASE_VERSION=0.x.x # any version of Dynamo 0.3.2+ listed at https://github.com/ai-dynamo/dynamo/releases

# 2. Install CRDs (skip if on shared cluster where CRDs already exist)
helm fetch https://helm.ngc.nvidia.com/nvidia/ai-dynamo/charts/dynamo-crds-${RELEASE_VERSION}.tgz
helm install dynamo-crds dynamo-crds-${RELEASE_VERSION}.tgz --namespace default

# 3. Install Platform
helm fetch https://helm.ngc.nvidia.com/nvidia/ai-dynamo/charts/dynamo-platform-${RELEASE_VERSION}.tgz
helm install dynamo-platform dynamo-platform-${RELEASE_VERSION}.tgz --namespace ${NAMESPACE} --create-namespace
```

**For Shared/Multi-Tenant Clusters:**

If your cluster has namespace-restricted Dynamo operators, add this flag to step 3:
```bash
--set dynamo-operator.namespaceRestriction.enabled=true
```

For more details or customization options (including multinode deployments), see **[Installation Guide for Dynamo Kubernetes Platform](/docs/kubernetes/installation_guide.md)**.

## 2. Choose Your Backend

Each backend has deployment examples and configuration options:

| Backend      | Aggregated | Aggregated + Router | Disaggregated | Disaggregated + Router | Disaggregated + Planner | Disaggregated Multi-node |
|--------------|:----------:|:-------------------:|:-------------:|:----------------------:|:-----------------------:|:------------------------:|
| **[SGLang](/examples/backends/sglang/deploy/README.md)**       | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ |
| **[TensorRT-LLM](/examples/backends/trtllm/deploy/README.md)** | ✅ | ✅ | ✅ | ✅ | 🚧 | ✅ |
| **[vLLM](/examples/backends/vllm/deploy/README.md)**           | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ |

## 3. Deploy Your First Model

```bash
export NAMESPACE=dynamo-system
kubectl create namespace ${NAMESPACE}

# to pull model from HF
export HF_TOKEN=<Token-Here>
kubectl create secret generic hf-token-secret \
  --from-literal=HF_TOKEN="$HF_TOKEN" \
  -n ${NAMESPACE};

# Deploy any example (this uses vLLM with Qwen model using aggregated serving)
kubectl apply -f examples/backends/vllm/deploy/agg.yaml -n ${NAMESPACE}

# Check status
kubectl get dynamoGraphDeployment -n ${NAMESPACE}

# Test it
kubectl port-forward svc/vllm-agg-frontend 8000:8000 -n ${NAMESPACE}
curl http://localhost:8000/v1/models
```

For SLA-based autoscaling, see [SLA Planner Quick Start Guide](/docs/planner/sla_planner_quickstart.md).

## Understanding Dynamo's Custom Resources

Dynamo provides two main Kubernetes Custom Resources for deploying models:

### DynamoGraphDeploymentRequest (DGDR) - Simplified SLA-Driven Configuration

The **recommended approach** for generating optimal configurations. DGDR provides a high-level interface where you specify:
- Model name and backend framework
- SLA targets (latency requirements)
- GPU type (optional)

Dynamo automatically handles profiling and generates an optimized DGD spec in the status. Perfect for:
- SLA-driven configuration generation
- Automated resource optimization
- Users who want simplicity over control

**Note**: DGDR generates a DGD spec which you can then use to deploy.

### DynamoGraphDeployment (DGD) - Direct Configuration

A lower-level interface that defines your complete inference pipeline:
- Model configuration
- Resource allocation (GPUs, memory)
- Scaling policies
- Frontend/backend connections

Use this when you need fine-grained control or have already completed profiling.

Refer to the [API Reference and Documentation](/docs/kubernetes/api_reference.md) for more details.

## 📖 API Reference & Documentation

For detailed technical specifications of Dynamo's Kubernetes resources:

- **[API Reference](/docs/kubernetes/api_reference.md)** - Complete CRD field specifications for all Dynamo resources
- **[Create Deployment](/docs/kubernetes/deployment/create_deployment.md)** - Step-by-step deployment creation with DynamoGraphDeployment
- **[Operator Guide](/docs/kubernetes/dynamo_operator.md)** - Dynamo operator configuration and management

### Choosing Your Architecture Pattern

When creating a deployment, select the architecture pattern that best fits your use case:

- **Development / Testing** - Use `agg.yaml` as the base configuration
- **Production with Load Balancing** - Use `agg_router.yaml` to enable scalable, load-balanced inference
- **High Performance / Disaggregated** - Use `disagg_router.yaml` for maximum throughput and modular scalability

### Frontend and Worker Components

You can run the Frontend on one machine (e.g., a CPU node) and workers on different machines (GPU nodes). The Frontend serves as a framework-agnostic HTTP entry point that:

- Provides OpenAI-compatible `/v1/chat/completions` endpoint
- Auto-discovers backend workers via [service discovery](/docs/kubernetes/service_discovery.md) (Kubernetes-native by default)
- Routes requests and handles load balancing
- Validates and preprocesses requests

### Customizing Your Deployment

Example structure:
```yaml
apiVersion: nvidia.com/v1alpha1
kind: DynamoGraphDeployment
metadata:
  name: my-llm
spec:
  services:
    Frontend:
      dynamoNamespace: my-llm
      componentType: frontend
      replicas: 1
      extraPodSpec:
        mainContainer:
          image: your-image
    VllmDecodeWorker:  # or SGLangDecodeWorker, TrtllmDecodeWorker
      dynamoNamespace: dynamo-dev
      componentType: worker
      replicas: 1
      envFromSecret: hf-token-secret  # for HuggingFace models
      resources:
        limits:
          gpu: "1"
      extraPodSpec:
        mainContainer:
          image: your-image
          command: ["/bin/sh", "-c"]
          args:
            - python3 -m dynamo.vllm --model YOUR_MODEL [--your-flags]
```

Worker command examples per backend:
```yaml
# vLLM worker
args:
  - python3 -m dynamo.vllm --model Qwen/Qwen3-0.6B

# SGLang worker
args:
  - >-
    python3 -m dynamo.sglang
    --model-path deepseek-ai/DeepSeek-R1-Distill-Llama-8B
    --tp 1
    --trust-remote-code

# TensorRT-LLM worker
args:
  - python3 -m dynamo.trtllm
    --model-path deepseek-ai/DeepSeek-R1-Distill-Llama-8B
    --served-model-name deepseek-ai/DeepSeek-R1-Distill-Llama-8B
    --extra-engine-args /workspace/examples/backends/trtllm/engine_configs/deepseek-r1-distill-llama-8b/agg.yaml
```

Key customization points include:
- **Model Configuration**: Specify model in the args command
- **Resource Allocation**: Configure GPU requirements under `resources.limits`
- **Scaling**: Set `replicas` for number of worker instances
- **Routing Mode**: Enable KV-cache routing by setting `DYN_ROUTER_MODE=kv` in Frontend envs
- **Worker Specialization**: Add `--is-prefill-worker` flag for disaggregated prefill workers

## Additional Resources

- **[Examples](/docs/examples/README.md)** - Complete working examples
- **[Create Custom Deployments](/docs/kubernetes/deployment/create_deployment.md)** - Build your own CRDs
- **[Managing Models with DynamoModel](/docs/kubernetes/deployment/dynamomodel-guide.md)** - Deploy LoRA adapters and manage models
- **[Operator Documentation](/docs/kubernetes/dynamo_operator.md)** - How the platform works
- **[Service Discovery](/docs/kubernetes/service_discovery.md)** - Discovery backends and configuration
- **[Helm Charts](/deploy/helm/README.md)** - For advanced users
- **[GitOps Deployment with FluxCD](/docs/kubernetes/fluxcd.md)** - For advanced users
- **[Logging](/docs/kubernetes/observability/logging.md)** - For logging setup
- **[Multinode Deployment](/docs/kubernetes/deployment/multinode-deployment.md)** - For multinode deployment
- **[Grove](/docs/kubernetes/grove.md)** - For grove details and custom installation
- **[Monitoring](/docs/kubernetes/observability/metrics.md)** - For monitoring setup
- **[Model Caching with Fluid](/docs/kubernetes/model_caching_with_fluid.md)** - For model caching with Fluid