values.yaml

# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
# SPDX-License-Identifier: Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Used to generate top-level secrets (overridden by custom-values.yaml)

# Subcharts configuration

# Dynamo operator configuration
dynamo-operator:
  # -- Whether to enable the Dynamo Kubernetes operator deployment
  enabled: true

  # -- NATS server address for operator communication (leave empty to use the bundled NATS chart). Format: "nats://hostname:port"
  natsAddr: ""

  # -- etcd server address for operator state storage (leave empty to use the bundled etcd chart). Format: "http://hostname:port" or "https://hostname:port"
  etcdAddr: ""

  # -- URL for the Model Express server if not deployed by this helm chart. This is ignored if Model Express server is installed by this helm chart (global.model-express.enabled is true).
  modelExpressURL: ""
  # -- Namespace access controls for the operator
  namespaceRestriction:
    # -- Whether to restrict operator to specific namespaces. By default, the operator will run with cluster-wide permissions. Only 1 instance of the operator should be deployed in the cluster. If you want to deploy multiple operator instances, you can set this to true and specify the target namespace (by default, the target namespace is the helm release namespace).
    enabled: false
    # -- Target namespace for operator deployment (leave empty for current namespace)
    targetNamespace:

  # Controller manager configuration
  controllerManager:
    # -- Node tolerations for controller manager pods
    tolerations: []

    # -- Affinity for controller manager pods
    affinity: []

    # Leader election configuration for cluster-wide coordination
    leaderElection:
      # -- Leader election ID for cluster-wide coordination. WARNING: All cluster-wide operators must use the SAME ID to prevent split-brain. Different IDs would allow multiple leaders simultaneously.
      id: ""  # If empty, defaults to: dynamo.nvidia.com (shared across all cluster-wide operators)
      # -- Namespace for leader election leases (only used in cluster-wide mode). If empty, defaults to kube-system for cluster-wide coordination. All cluster-wide operators should use the SAME namespace for proper leader election.
      namespace: ""

    manager:
      # Container image configuration for the operator manager
      image:
        # -- Official NVIDIA Dynamo operator image repository
        repository: "nvcr.io/nvidia/ai-dynamo/kubernetes-operator"
        # -- Image tag (leave empty to use chart default)
        tag: ""
        # -- Image pull policy - when to pull the image
        pullPolicy: IfNotPresent

      # Command line arguments for the operator manager
      args:
        # -- Health probe endpoint for Kubernetes health checks
        - --health-probe-bind-address=:8081
        # -- Metrics endpoint for Prometheus scraping (localhost only for security)
        - --metrics-bind-address=127.0.0.1:8080

  # -- Secrets for pulling private container images
  imagePullSecrets: []

  # Core Dynamo platform configuration
  dynamo:
    # -- How long to wait before forcefully terminating Grove instances
    groveTerminationDelay: 15m

    # Internal utility images used by the platform
    internalImages:
      # -- Debugger image for troubleshooting deployments
      debugger: python:3.12-slim

    # -- Whether to enable restricted security contexts for enhanced security
    enableRestrictedSecurityContext: false

    # Docker registry configuration for private repositories
    dockerRegistry:
      # -- Whether to use Kubernetes secrets for registry authentication
      useKubernetesSecret: false
      # -- Docker registry server URL
      server:
      # -- Registry username
      username:
      # -- Registry password (consider using existingSecretName instead)
      password:
      # -- Name of existing Kubernetes secret containing registry credentials
      existingSecretName:
      # -- Whether the registry uses HTTPS
      secure: true

    # Ingress configuration for external access
    ingress:
      # -- Whether to create ingress resources
      enabled: false
      # -- Ingress class name (e.g., "nginx", "traefik")
      className:
      # -- Secret name containing TLS certificates
      tlsSecretName: my-tls-secret

    # Istio service mesh configuration
    istio:
      # -- Whether to enable Istio integration
      enabled: false
      # -- Istio gateway name for routing
      gateway:

    # -- Host suffix for generated ingress hostnames
    ingressHostSuffix: ""

    # -- Whether VirtualServices should support HTTPS routing
    virtualServiceSupportsHTTPS: false

    # Metrics configuration
    metrics:
      # -- Endpoint that services can use to retrieve metrics. If set, dynamo operator will automatically inject the PROMETHEUS_ENDPOINT environment variable into services it manages. Users can override the value of the PROMETHEUS_ENDPOINT environment variable by modifying the corresponding deployment's environment variables
      prometheusEndpoint: ""

    # MPI Run configuration
    mpiRun:
      # -- Name of the secret containing the SSH key for MPI Run
      secretName: "mpi-run-ssh-secret"
      # SSH key generation configuration
      sshKeygen:
        # -- Whether to enable SSH key generation for MPI Run
        enabled: true


# Grove component - distributed inference orchestration
grove:
  # -- Whether to enable Grove for multi-node inference coordination, if enabled, the Grove operator will be deployed cluster-wide
  enabled: false

# Kai Scheduler component - advanced workload scheduling
kai-scheduler:
  # -- Whether to enable Kai Scheduler for intelligent resource allocation, if enabled, the Kai Scheduler operator will be deployed cluster-wide
  enabled: false

# etcd configuration - distributed key-value store for operator state
# For complete configuration options, see: https://github.com/bitnami/charts/tree/main/bitnami/etcd
etcd:

  # -- Whether to enable etcd deployment, disable if you want to use an external etcd instance
  enabled: true

  image:
    # -- following bitnami announcement for brownout - https://github.com/bitnami/charts/tree/main/bitnami/etcd#%EF%B8%8F-important-notice-upcoming-changes-to-the-bitnami-catalog, we need to use the legacy repository until we migrate to the new "secure" repository
    repository: bitnamilegacy/etcd
    tag: 3.5.18-debian-12-r5

  # Persistent storage configuration for etcd data
  persistence:
    # Whether to enable persistent storage (recommended for production)
    enabled: true
    # Use the cluster default storage-class or override with a named class
    storageClass: null
    # Size of persistent volume for etcd data
    size: 1Gi

  # Pre-upgrade job configuration
  preUpgrade:
    # Whether to run pre-upgrade validation jobs
    enabled: false

  # Number of etcd replicas (1 for single-node, 3+ for HA)
  replicaCount: 1

  # Authentication and authorization settings
  # Explicitly remove authentication for simplified internal communication
  auth:
    rbac:
      # Whether to create RBAC authentication (disabled for internal use)
      create: false

  # Health check configuration
  readinessProbe:
    # Whether to enable readiness probes (disabled to reduce startup complexity)
    enabled: false

  livenessProbe:
    # Whether to enable liveness probes (disabled to reduce startup complexity)
    enabled: false

  # Node tolerations for etcd pods (allows scheduling on specific nodes)
  tolerations: []

# NATS configuration - messaging system for operator communication
# For complete configuration options, see: https://github.com/nats-io/k8s/tree/main/helm/charts/nats
nats:
  # -- Whether to enable NATS deployment, disable if you want to use an external NATS instance
  enabled: true

  # TLS Certificate Authority configuration for secure communication
  # Reference a common CA Certificate or Bundle in all nats config `tls` blocks and nats-box contexts
  # Note: `tls.verify` still must be set in the appropriate nats config `tls` blocks to require mTLS
  tlsCA:
    # Whether to enable TLS CA configuration
    enabled: false

  # Core NATS server configuration
  config:
    # NATS clustering for high availability (multiple NATS servers)
    cluster:
      # Whether to enable NATS clustering (disabled for single-node setups)
      enabled: false

    # JetStream - persistent messaging and streaming capabilities
    jetstream:
      # Whether to enable JetStream (recommended for persistent messaging)
      enabled: true

      # File-based storage for JetStream streams and consumers
      fileStore:
        # Whether to enable file storage (persistent across restarts)
        enabled: true
        # Directory path for JetStream file storage
        dir: /data

        ############################################################
        # Persistent Volume Claim for JetStream file storage
        ############################################################
        pvc:
          # Whether to create a PVC for JetStream storage
          enabled: true
          # Size of the persistent volume for JetStream data
          size: 10Gi
          # Storage class name (leave empty for default)
          storageClassName:

          # Advanced PVC configuration (merge additional fields)
          # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#persistentvolumeclaim-v1-core
          merge: {}
          patch: []
          # PVC name (defaults to "{{ include "nats.fullname" $ }}-js")
          name:

        # Maximum size for JetStream file storage (defaults to PVC size)
        maxSize:

      # Memory-based storage for JetStream (non-persistent)
      memoryStore:
        # Whether to enable memory storage (faster but not persistent)
        enabled: false

      # Advanced JetStream configuration
      # For options see: https://docs.nats.io/running-a-nats-service/configuration#jetstream
      merge: {}
      patch: []

    # Core NATS server settings
    nats:
      # Port for NATS client connections
      port: 4222

      # TLS configuration for encrypted connections
      tls:
        # Whether to enable TLS encryption
        enabled: false
        # Advanced TLS configuration
        # For options see: https://docs.nats.io/running-a-nats-service/configuration/securing_nats/tls
        merge: {}
        patch: []

    # Leaf nodes for creating NATS topologies and remote connections
    leafnodes:
      # Whether to enable leaf node connections
      enabled: false

    # WebSocket support for browser-based NATS clients
    websocket:
      # Whether to enable WebSocket protocol support
      enabled: false

    # MQTT protocol bridge for IoT device connectivity
    mqtt:
      # Whether to enable MQTT protocol support
      enabled: false

    # Gateway connections for multi-cluster NATS deployments
    gateway:
      # Whether to enable gateway connections
      enabled: false

    # HTTP monitoring endpoint for NATS server metrics
    monitor:
      # Whether to enable HTTP monitoring interface
      enabled: true
      # Port for monitoring HTTP endpoint
      port: 8222

      # TLS configuration for monitoring endpoint
      tls:
        # Whether to enable HTTPS for monitoring (requires config.nats.tls enabled)
        # When enabled, monitoring port will use HTTPS with the options from config.nats.tls
        enabled: false

    # Go pprof profiling endpoint for performance debugging
    profiling:
      # Whether to enable profiling endpoint (for debugging only)
      enabled: false
      # Port for profiling endpoint
      port: 65432

    # Account resolver for multi-tenant NATS deployments
    resolver:
      # Whether to enable account resolution (for advanced multi-tenancy)
      enabled: false

    # Server naming configuration
    # Adds a prefix to the server name, which defaults to the pod name
    # Helpful for ensuring server name is unique in a super cluster
    serverNamePrefix: ""

    # Advanced NATS configuration merging and patching
    # For complete options see: https://docs.nats.io/running-a-nats-service/configuration
    # Special rules apply:
    #  1. strings that start with << and end with >> will be unquoted
    #     use this for variables and numbers with units
    #  2. keys ending in $include will be switched to include directives
    #     keys are sorted alphabetically, use prefix before $includes to control includes ordering
    #     paths should be relative to /etc/nats-config/nats.conf
    # Example:
    #   merge:
    #     $include: ./my-config.conf
    #     zzz$include: ./my-config-last.conf
    #     server_name: nats
    #     authorization:
    #       token: << $TOKEN >>
    #     jetstream:
    #       max_memory_store: << 1GB >>
    merge: {}
    patch: []

  ############################################################
  # NATS container configuration in StatefulSet
  ############################################################
  container:
    # NATS server container image configuration
    image:
      # Official NATS server repository
      repository: nats
      # NATS server version (Alpine-based for smaller size)
      tag: 2.10.21-alpine
      # Image pull policy (leave empty for chart default)
      pullPolicy:
      # Custom registry URL (leave empty for Docker Hub)
      registry:

    # Container port configuration
    # Note: Ports must also be enabled in the config section above
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#containerport-v1-core
    ports:
      # Main NATS client connection port
      nats: {}
      # Leaf node connection port
      leafnodes: {}
      # WebSocket connection port
      websocket: {}
      # MQTT protocol port
      mqtt: {}
      # Cluster communication port
      cluster: {}
      # Gateway connection port
      gateway: {}
      # HTTP monitoring port
      monitor: {}
      # Go profiling port
      profiling: {}

    # Environment variables for the NATS container
    # Map with key as env var name, value can be string or map
    # Example:
    #   env:
    #     GOMEMLIMIT: 7GiB
    #     TOKEN:
    #       valueFrom:
    #         secretKeyRef:
    #           name: nats-auth
    #           key: token
    env: {}

    # Advanced container configuration merging and patching
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#container-v1-core
    merge: {}
    patch: []

  ############################################################
  # Configuration reloader container for hot config updates
  ############################################################
  reloader:
    # Whether to enable the config reloader sidecar container
    enabled: true

    # Config reloader container image
    image:
      # Official NATS config reloader repository
      repository: natsio/nats-server-config-reloader
      # Config reloader version
      tag: 0.16.0
      # Image pull policy (leave empty for chart default)
      pullPolicy:
      # Custom registry URL (leave empty for Docker Hub)
      registry:

    # Environment variables for the reloader container
    env: {}

    # Volume mount prefixes from NATS container to share with reloader
    # All NATS container volume mounts with these prefixes will be mounted into the reloader
    natsVolumeMountPrefixes:
    - /etc/

    # Advanced reloader container configuration
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#container-v1-core
    merge: {}
    patch: []

  ############################################################
  # Prometheus metrics exporter container (optional)
  ############################################################
  # Note: config.monitor must be enabled for this to work
  promExporter:
    # Whether to enable Prometheus metrics exporter sidecar
    enabled: false

  ############################################################
  # Kubernetes Service for NATS access
  ############################################################
  service:
    # Whether to create a Kubernetes Service for NATS
    enabled: true

    # Service port configuration
    # Additional boolean field 'enabled' controls whether port is exposed in the service
    # Note: Ports must also be enabled in the config section above
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#serviceport-v1-core
    ports:
      # Main NATS client connection port
      nats:
        enabled: true
      # Leaf node connection port
      leafnodes:
        enabled: true
      # WebSocket connection port
      websocket:
        enabled: true
      # MQTT protocol port
      mqtt:
        enabled: true
      # Cluster communication port (typically internal only)
      cluster:
        enabled: false
      # Gateway connection port (typically internal only)
      gateway:
        enabled: false
      # HTTP monitoring port (typically internal only)
      monitor:
        enabled: false
      # Go profiling port (typically internal only)
      profiling:
        enabled: false

    # Advanced service configuration
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#service-v1-core
    merge: {}
    patch: []
    # Service name (defaults to "{{ include "nats.fullname" $ }}")
    name:

  ############################################################
  # Advanced NATS Kubernetes resource configuration
  ############################################################

  # StatefulSet configuration for NATS server persistence
  statefulSet:
    # Advanced StatefulSet configuration merging and patching
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#statefulset-v1-apps
    merge: {}
    patch: []
    # StatefulSet name (defaults to "{{ include "nats.fullname" $ }}")
    name:

  # Pod template configuration for NATS StatefulSet
  podTemplate:
    # Whether to add a hash of the ConfigMap as a pod annotation
    # This will cause the StatefulSet to roll when the ConfigMap is updated
    configChecksumAnnotation: true

    # Pod topology spread constraints for better distribution across nodes
    # Map of topologyKey: topologySpreadConstraint
    # labelSelector will be added automatically to match StatefulSet pods
    # Example:
    #   topologySpreadConstraints:
    #     kubernetes.io/hostname:
    #       maxSkew: 1
    topologySpreadConstraints: {}

    # Advanced pod template configuration
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#pod-v1-core
    merge:
      spec:
        # Node tolerations for NATS pods (allows scheduling on specific nodes)
        tolerations: []
    patch: []

  # Headless service for StatefulSet pod discovery
  headlessService:
    # Advanced headless service configuration
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#service-v1-core
    merge: {}
    patch: []
    # Headless service name (defaults to "{{ include "nats.fullname" $ }}-headless")
    name:

  # ConfigMap for NATS server configuration
  configMap:
    # Advanced ConfigMap configuration
    # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#configmap-v1-core
    merge: {}
    patch: []
    # ConfigMap name (defaults to "{{ include "nats.fullname" $ }}-config")
    name:

  # Pod Disruption Budget for controlled rolling updates
  podDisruptionBudget:
    # Whether to create a PodDisruptionBudget (recommended for production)
    enabled: true

  # Service Account for NATS server pods
  serviceAccount:
    # Whether to create and use a dedicated service account
    enabled: false

  ############################################################
  # NATS Box - CLI tools and debugging container
  # NATS Box provides CLI tools for interacting with NATS server
  ############################################################
  natsBox:
    # Whether to deploy NATS Box for CLI access and debugging
    enabled: false

    ############################################################
    # NATS client contexts for authentication and connection
    ############################################################
    contexts:
      # Default context configuration
      default:
        # Credentials-based authentication
        creds:
          # Inline credentials file contents (base64 encoded)
          contents:
          # Name of existing secret containing credentials file
          secretName:
          # Directory to mount credentials (defaults to /etc/nats-creds/<context-name>)
          dir:
          # Key name in secret for credentials file
          key: nats.creds

        # NKey-based authentication (public/private key pairs)
        nkey:
          # Inline NKey file contents (base64 encoded)
          contents:
          # Name of existing secret containing NKey file
          secretName:
          # Directory to mount NKey (defaults to /etc/nats-nkeys/<context-name>)
          dir:
          # Key name in secret for NKey file
          key: nats.nk

        # TLS client certificate authentication
        tls:
          # Name of existing secret containing TLS client certificates
          secretName:
          # Directory to mount certificates (defaults to /etc/nats-certs/<context-name>)
          dir:
          # Certificate file name in secret
          cert: tls.crt
          # Private key file name in secret
          key: tls.key

        # Advanced context configuration
        # For options see: https://docs.nats.io/using-nats/nats-tools/nats_cli#nats-contexts
        merge: {}
        patch: []

    # Name of context to select by default for NATS CLI operations
    defaultContextName: default

    ############################################################
    # NATS Box container configuration
    ############################################################
    container:
      # NATS Box container image
      image:
        # Official NATS Box repository with CLI tools
        repository: natsio/nats-box
        # NATS Box version
        tag: 0.14.5
        # Image pull policy (leave empty for chart default)
        pullPolicy:
        # Custom registry URL (leave empty for Docker Hub)
        registry:

      # Environment variables for NATS Box container
      env: {}

      # Advanced container configuration
      # https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.24/#container-v1-core
      merge: {}
      patch: []

    # Service Account for NATS Box deployment
    serviceAccount:
      # Whether to create and use a dedicated service account for NATS Box
      enabled: false

    # Pod template configuration for NATS Box deployment
    podTemplate:
      merge:
        spec:
          # Node tolerations for NATS Box pods
          tolerations: []
      patch: []