scheduler.rs

// SPDX-FileCopyrightText: Copyright (c) 2024-2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
// SPDX-License-Identifier: Apache-2.0
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//! Asynchronous Scheduler for LLM Request Management
//!
//! This module implements an asynchronous scheduler that handles three main functions:
//! 1. Receiving new requests and placing them in the waiting queue
//! 2. Scheduling waiting requests against available KV cache resources
//! 3. Simulating the execution of running requests with realistic timing
//!
//! ## Scheduling Process
//! The scheduler uses a watermark-based approach to determine if there's sufficient
//! KV cache space for new requests. It also enforces a batched tokens budget to prevent
//! oversubscription of computational resources. Only requests that can be allocated
//! these resources are moved from waiting to running state.
//!
//! ## Request Simulation
//! The simulation models two key phases:
//! - Prefill phase: Uses a quadratic cost function: (cached_tokens + new_tokens) * new_tokens
//! - Decode phase: Uses a cost function proportional to active KV blocks (linear)
//!
//! ## Resource Management
//! The scheduler communicates with the KvManager through MoveBlock signals at each
//! stage of request processing. When resources become constrained, it employs an
//! LRU-based preemption strategy where the oldest running request is evicted and
//! placed at the back of the waiting queue to be rescheduled later.
//!
//! ## NOTE
//! The current prefill and decoding time simulations are not scientific at all and are WIP

use crate::kv_router::protocols::{ForwardPassMetrics, KvCacheEventData, KvStats, WorkerStats};
use crate::mocker::evictor::LRUEvictor;
use crate::mocker::kv_manager::KvManager;
use crate::mocker::protocols::{block_response_to_kv_event, MoveBlock, OutputSignal, PrefillCost};
use crate::mocker::protocols::{DirectRequest, MockEngineArgs, MoveBlockResponse};
use crate::mocker::sequence::ActiveSequence;
use crate::tokens::blocks::UniqueBlock;
use std::collections::HashMap;
use std::collections::VecDeque;
use std::sync::Arc;
use tokio::sync::{mpsc, Mutex};
use tokio::time::Duration;
use tokio_util::sync::CancellationToken;
use uuid::Uuid;

/// Enum representing either a direct request or an active sequence
pub enum Request {
    Direct(DirectRequest),
    Active(ActiveSequence),
}

#[derive(Default)]
struct SchedulerState {
    waiting: VecDeque<Uuid>,
    prefill: VecDeque<Uuid>,
    decode: LRUEvictor<Uuid>,
    requests: HashMap<Uuid, Request>,
    prefill_costs: HashMap<Uuid, PrefillCost>,
    max_num_batched_tokens: Option<usize>,
    active_tokens: usize,
    waiting_tokens: usize,
}

impl SchedulerState {
    fn new(max_num_batched_tokens: Option<usize>) -> Self {
        SchedulerState {
            max_num_batched_tokens,
            ..Default::default()
        }
    }

    fn is_empty(&self) -> bool {
        self.requests.is_empty()
    }

    /// Create a new UUID for a DirectRequest, add it to requests, and push the UUID to waiting.
    fn receive(&mut self, request: DirectRequest) -> Uuid {
        // Use the provided UUID if available, otherwise generate a new one
        let uuid = request.uuid.unwrap_or_else(Uuid::new_v4);
        self.requests.insert(uuid, Request::Direct(request));
        self.waiting.push_back(uuid);
        uuid
    }

    /// Get the next UUID from ready or waiting queue and its associated Request.
    fn next(&mut self) -> Option<(Uuid, Request)> {
        let uuid = self.waiting.pop_front()?;
        let request = self
            .requests
            .remove(&uuid)
            .expect("Request does not exist.");
        Some((uuid, request))
    }

    /// Move a UUID and its Request to the waiting queue (front).
    fn first_in_line(&mut self, uuid: Uuid, request: Request) {
        self.requests.insert(uuid, request);
        self.waiting.push_front(uuid);
    }

    /// Move a UUID and its Request to the ready queue.
    fn move_to_prefill(&mut self, uuid: Uuid, active_seq: ActiveSequence, cost: PrefillCost) {
        self.waiting_tokens += cost.new_tokens;
        self.requests.insert(uuid, Request::Active(active_seq));
        self.prefill.push_back(uuid);
        self.prefill_costs.insert(uuid, cost);
    }

    /// Try (chunked) prefill and move to decode queue
    ///
    /// Returns `Some((prefill_compute, creation_signal, is_full_prefill))` where:
    /// - `prefill_compute`: The compute time in milliseconds for this prefill operation
    /// - `creation_signal`: Optional MoveBlock signal for KV cache block creation
    /// - `is_full_prefill`: true if the entire sequence was prefilled, false if chunked
    fn try_prefill(&mut self) -> Option<(f64, Option<MoveBlock>, bool)> {
        let uuid = self.prefill.pop_front()?;

        // Remove and extract prefill_compute from prefill_costs
        let mut prefill_cost = self
            .prefill_costs
            .remove(&uuid)
            .expect("Expects valid prefill cost.");

        let new_tokens = prefill_cost.new_tokens;

        let maybe_prefill_tokens = self.max_num_batched_tokens.and_then(|max_tokens| {
            let remaining_tokens = max_tokens - self.active_tokens;
            if prefill_cost.new_tokens > remaining_tokens {
                Some(remaining_tokens)
            } else {
                None
            }
        });

        let (prefill_compute, is_full_prefill) = if let Some(prefill_tokens) = maybe_prefill_tokens
        {
            let prefill_compute = prefill_cost.predict_prefill_compute(Some(prefill_tokens));
            prefill_cost.new_tokens -= prefill_tokens;
            assert!(
                (prefill_cost.new_tokens > 0) && (prefill_compute > 0.0),
                "Encountered negative prefill tokens or prefill compute cost."
            );

            self.prefill.push_front(uuid);
            self.prefill_costs.insert(uuid, prefill_cost);

            self.active_tokens = self.max_num_batched_tokens.unwrap();
            self.waiting_tokens -= prefill_tokens;

            (prefill_compute, false)
        } else {
            // Assume possible to complete prefilling the sequence, transfer to decode
            self.decode.insert(uuid);

            self.active_tokens += new_tokens;
            self.waiting_tokens -= new_tokens;

            (prefill_cost.predict_prefill_compute(None), true)
        };

        // NOTE: the current behavior allocates the KV blocks for the entire sequence,
        // even if only a chunk is prefilled
        let Some(Request::Active(sequence)) = self.requests.get_mut(&uuid) else {
            panic!("Request does not exist.");
        };

        Some((
            prefill_compute,
            sequence.take_creation_signal(),
            is_full_prefill,
        ))
    }

    // assume (chunked) prefills are completed, then active tokens would be 1 per decoding sequence
    fn reset_active_tokens(&mut self) {
        self.active_tokens = self.decode.len();
    }

    fn run(&mut self, uuid: Uuid) -> Option<&mut ActiveSequence> {
        if !self.decode.contains(&uuid) {
            return None;
        }
        let Some(Request::Active(sequence)) = self.requests.get_mut(&uuid) else {
            panic!("Request does not exist.");
        };
        Some(sequence)
    }

    fn num_active_requests(&self) -> usize {
        self.prefill.len() + self.decode.len()
    }

    /// Remove a UUID and its associated Request from collections.
    fn complete(&mut self, uuid: &Uuid) {
        tracing::debug!("Request {} will complete", uuid);
        self.decode.remove(uuid);
        self.requests.remove(uuid);
        self.prefill_costs.remove(uuid);
        self.active_tokens -= 1;
    }

    /// Preempt the oldest running request by evicting it from running, resetting the sequence,
    /// and adding it back to the waiting queue.
    /// Returns the signal from reset_with_signal or None if no requests are running.
    fn preempt(&mut self) -> Vec<MoveBlock> {
        // Evict the oldest UUID from running
        let uuid = self
            .decode
            .evict()
            .expect("Nothing to evict for preemption.");
        let request = self
            .requests
            .remove(&uuid)
            .expect("Request does not exist.");
        self.prefill_costs.remove(&uuid);
        self.active_tokens -= 1;
        tracing::warn!("Request {uuid} will be preempted");

        // Reset the sequence and get the new sequence and signal
        // Insert the new sequence back into the requests map and add to waiting queue
        let Request::Active(mut active_sequence) = request else {
            panic!("Expected ActiveSequence in running queue")
        };
        let signals = active_sequence.reset_with_signal();

        // Note: For preemption, we don't compute hit rate since we don't have access to new_tokens
        // and the sequence is being reset anyway. Hit rate tracking is primarily for new scheduling attempts.

        self.first_in_line(uuid, Request::Active(active_sequence));

        signals
    }
}

/// Manages scheduling of requests using KvManager resources
#[derive(Clone)]
pub struct Scheduler {
    dp_rank: Option<u32>,
    state: Arc<Mutex<SchedulerState>>,
    kv_manager: Arc<Mutex<KvManager>>,
    request_tx: mpsc::UnboundedSender<DirectRequest>,
    hit_rates: Arc<Mutex<VecDeque<f32>>>,
}

impl Scheduler {
    /// Create a new Scheduler with the given parameters
    pub fn new(
        args: MockEngineArgs,
        dp_rank: Option<u32>,
        output_tx: Option<mpsc::UnboundedSender<OutputSignal>>,
        kv_events_tx: Option<mpsc::UnboundedSender<KvCacheEventData>>,
        cancellation_token: Option<CancellationToken>,
    ) -> Self {
        let state = Arc::new(Mutex::new(SchedulerState::new(args.max_num_batched_tokens)));

        // Create internal channel for KV events only if needed
        let (block_resp_tx, mut block_resp_rx) = if kv_events_tx.is_some() {
            let (tx, rx) = mpsc::unbounded_channel::<MoveBlockResponse>();
            (Some(tx), Some(rx))
        } else {
            (None, None)
        };

        let kv_manager = Arc::new(Mutex::new(KvManager::new_with_sender(
            args.num_gpu_blocks,
            args.block_size,
            block_resp_tx,
        )));
        let hit_rates = Arc::new(Mutex::new(VecDeque::with_capacity(1000)));

        // Assert speedup_ratio is greater than 0
        assert!(
            args.speedup_ratio > 0.0,
            "speedup_ratio must be greater than 0, got: {}",
            args.speedup_ratio
        );

        // Create channel for request handling
        let (request_tx, mut request_rx) = mpsc::unbounded_channel::<DirectRequest>();

        // Create a clone for the background task
        let state_clone = state.clone();
        let kv_manager_clone = kv_manager.clone();
        let output_tx_clone = output_tx.clone();
        let cancel_token_clone = cancellation_token.unwrap_or_default().clone();
        let hit_rates_clone = hit_rates.clone();

        // Spawn main background task with cancellation token
        tokio::spawn(async move {
            let mut should_schedule = true;

            loop {
                {
                    let state_guard = state_clone.lock().await;

                    // Enqueue new request, blocks until at least one is received, so no redundant work is done
                    // TODO: clean this up? double lock acquisition is ugly, but needed to not hold the lock forever
                    if state_guard.is_empty() {
                        drop(state_guard);
                        let Some(request) = request_rx.recv().await else {
                            tracing::warn!("request sender is dropped");
                            break;
                        };
                        let mut state_guard = state_clone.lock().await;
                        state_guard.receive(request);
                    }
                }

                tokio::select! {
                    biased;

                    // Enqueue new request
                    Some(request) = request_rx.recv() => {
                        let mut state = state_clone.lock().await;
                        state.receive(request);
                    }

                    // Try Scheduling Requests - runs on normal interval or after simulation
                    _ = tokio::task::yield_now() => {
                        // Skip if we just ran scheduling after simulation to prevent consecutive runs
                        if !should_schedule {
                            continue;
                        }

                        let mut state_guard = state_clone.lock().await;
                        let kv_manager_guard = kv_manager_clone.lock().await;

                        // Process DirectRequests, converting them to ActiveSequence and scheduling them until we can't
                        // schedule anymore.
                        let mut current_blocks = kv_manager_guard.num_active_blocks();
                        let mut current_tokens = state_guard.active_tokens + state_guard.waiting_tokens;
                        let mut current_seqs = state_guard.num_active_requests();

                        while let Some((uuid, request)) = state_guard.next() {
                            let active_sequence = get_active_sequence(request, args.block_size, args.enable_prefix_caching);

                            // Update predictive budgets
                            let prefill_cost = kv_manager_guard.get_prefill_cost(&active_sequence);
                            let total_tokens = active_sequence.len();
                            // this is conservative, assumes no cache hit so never over-schedules
                            let new_blocks = (total_tokens as u32).div_ceil(args.block_size as u32) as usize;
                            let new_tokens = prefill_cost.new_tokens;

                            current_blocks += new_blocks;
                            current_tokens += new_tokens;
                            current_seqs += 1;

                            // Check various budgets to see if possible to schedule
                            let under_block_budget = current_blocks as f64 <= (1. - args.watermark) * kv_manager_guard.max_capacity() as f64;
                            // If chunked prefill is enabled, we can be under token budget when scheduling
                            let comparison_tokens = if args.enable_chunked_prefill {current_tokens - new_tokens} else {current_tokens};
                            let under_token_budget = args.max_num_batched_tokens.is_none_or(|limit| comparison_tokens <= limit);
                            let under_seq_budget = args.max_num_seqs.is_none_or(|limit| current_seqs <= limit);

                            // Cannot schedule, put first in line instead
                            if !(under_block_budget && under_token_budget && under_seq_budget) {
                                state_guard.first_in_line(uuid, Request::Active(active_sequence));
                                break;
                            }

                            // Compute and store hit rate
                            let hit_rate = if !active_sequence.is_empty() { 1.0 - (new_tokens as f32 / active_sequence.len() as f32) } else { 0.0 };
                            {
                                let mut hit_rates_guard = hit_rates_clone.lock().await;
                                hit_rates_guard.push_back(hit_rate);
                                if hit_rates_guard.len() > 1000 {
                                    hit_rates_guard.pop_front();
                                }
                            }

                            state_guard.move_to_prefill(uuid, active_sequence, prefill_cost);
                            should_schedule = false;
                        }
                    }

                    // Check for cancellation
                    _ = cancel_token_clone.cancelled() => {
                        break;
                    }
                }

                // Simulates prefill + decode
                let mut state_guard = state_clone.lock().await;
                let mut kv_manager_guard = kv_manager_clone.lock().await;

                // Base time needed for decoding using active percentage and quadratic formula
                let active_perc = kv_manager_guard.get_active_perc();
                let decoding_time = -5.47 * active_perc.powi(2) + 43.88 * active_perc + 19.44;
                let mut total_time = Duration::from_secs_f64(decoding_time / 1000.0);

                // Process prefilling
                while let Some((prefill_compute, maybe_creation_signal, is_full_prefill)) =
                    state_guard.try_prefill()
                {
                    // NOTE: Prefill cost/time is always incremented for new blocks, even if they
                    // could be cached by other requests in the same batch. This matches vLLM behavior.
                    total_time += Duration::from_secs_f64(prefill_compute / 1000.0);

                    if let Some(creation_signal) = maybe_creation_signal {
                        if !process_signals(
                            &mut kv_manager_guard,
                            std::slice::from_ref(&creation_signal),
                        ) {
                            panic!("Block allocation for prefilling cannot fail.");
                        }

                        // Drain KV events and forward to relay after prefill signal processing
                        if let (Some(ref relay_tx), Some(ref mut rx)) =
                            (&kv_events_tx, &mut block_resp_rx)
                        {
                            while let Ok(event) = rx.try_recv() {
                                let _ = relay_tx.send(block_response_to_kv_event(event));
                            }
                        }
                    };

                    // Impossible to schedule more prefills if we encounter one incomplete (chunked) prefill
                    if !is_full_prefill {
                        break;
                    }
                }

                state_guard.reset_active_tokens();

                // Process decoding
                let uuids: Vec<Uuid> = state_guard.decode.keys().cloned().collect();
                if !uuids.is_empty() {
                    should_schedule = true
                };
                for uuid in uuids {
                    let Some(sequence) = state_guard.run(uuid) else {
                        continue;
                    };
                    let signals = sequence.generate();

                    // Process all signals with the KvManager
                    // Handling of preemption on failure
                    if !process_signals(&mut kv_manager_guard, &signals) {
                        sequence.pop(); // revert the failed generation op
                        for signal in state_guard.preempt() {
                            kv_manager_guard.process(&signal);
                        }
                        continue;
                    }

                    // Drain KV events and forward to relay after decode signal processing
                    if let (Some(ref relay_tx), Some(ref mut rx)) =
                        (&kv_events_tx, &mut block_resp_rx)
                    {
                        while let Ok(event) = rx.try_recv() {
                            let _ = relay_tx.send(block_response_to_kv_event(event));
                        }
                    }

                    // Check completion and send notification
                    let is_complete = sequence.generated_tokens() >= sequence.max_output_tokens();
                    let should_output =
                        sequence.generated_tokens() > sequence.already_generated_tokens();

                    let mut send_failed = false;
                    if should_output {
                        send_failed = output_tx_clone.as_ref().is_some_and(|tx| {
                            tx.send(OutputSignal {
                                uuid,
                                completed: is_complete,
                            })
                            .is_err()
                        });
                    }

                    if send_failed {
                        for signal in &sequence.free_signal() {
                            kv_manager_guard.process(signal);
                        }
                    }

                    if send_failed || is_complete {
                        state_guard.complete(&uuid);
                        continue;
                    }
                }

                // Sleep once for the adjusted duration
                drop(kv_manager_guard);
                drop(state_guard);
                let adjusted_time =
                    Duration::from_secs_f64(total_time.as_secs_f64() / args.speedup_ratio);
                if adjusted_time.as_millis() > 0 {
                    tokio::time::sleep(adjusted_time).await;
                }
            }
        });

        Self {
            dp_rank,
            state,
            kv_manager,
            request_tx,
            hit_rates,
        }
    }

    /// Add a new request to the waiting queue
    pub async fn receive(&self, request: DirectRequest) {
        let _ = self.request_tx.send(request);
    }

    pub fn request_sender(&self) -> mpsc::UnboundedSender<DirectRequest> {
        self.request_tx.clone()
    }

    pub async fn waiting_count(&self) -> usize {
        let state = self.state.lock().await;
        state.waiting.len()
    }

    pub async fn running_count(&self) -> usize {
        let state = self.state.lock().await;
        state.decode.len()
    }

    pub async fn waiting_tokens(&self) -> usize {
        let state = self.state.lock().await;
        state.waiting_tokens
    }

    pub async fn active_tokens(&self) -> usize {
        let state = self.state.lock().await;
        state.active_tokens
    }

    pub async fn kv_usage_perc(&self) -> f64 {
        let kv_manager = self.kv_manager.lock().await;
        kv_manager.current_capacity_perc()
    }

    /// Returns forward pass metrics for monitoring purposes
    pub async fn get_forward_pass_metrics(&self) -> ForwardPassMetrics {
        // Acquire all locks in consistent order: state -> kv_manager -> hit_rates
        let state = self.state.lock().await;
        let kv_manager = self.kv_manager.lock().await;
        let hit_rates_guard = self.hit_rates.lock().await;

        // Get state metrics
        let request_active_slots = state.decode.len() as u64;
        let num_requests_waiting = state.waiting.len() as u64;

        // Get KV manager metrics
        let active_blocks_count = kv_manager.active_blocks().len() as u64;
        let total_capacity = kv_manager.max_capacity() as u64;
        let gpu_cache_usage_perc = if total_capacity > 0 {
            active_blocks_count as f32 / total_capacity as f32
        } else {
            0.0
        };

        // Get hit rate metrics
        let gpu_prefix_cache_hit_rate = if hit_rates_guard.is_empty() {
            0.0
        } else {
            let sum: f32 = hit_rates_guard.iter().sum();
            sum / hit_rates_guard.len() as f32
        };

        let worker_stats = WorkerStats {
            data_parallel_rank: self.dp_rank,
            request_active_slots,
            request_total_slots: 1024, // vllm max_num_seqs for gpu >= 70 vram, otherwise 256, fallback is 128
            num_requests_waiting,
        };

        let kv_stats = KvStats {
            kv_active_blocks: active_blocks_count,
            kv_total_blocks: total_capacity,
            gpu_cache_usage_perc,
            gpu_prefix_cache_hit_rate,
        };

        let spec_decode_stats = None;

        ForwardPassMetrics {
            worker_stats,
            kv_stats,
            spec_decode_stats,
        }
        // Guards drop naturally here in reverse order (LIFO): hit_rates_guard, kv_manager, state
    }
}

/// Convert a Request to an ActiveSequence
fn get_active_sequence(
    request: Request,
    block_size: usize,
    enable_prefix_caching: bool,
) -> ActiveSequence {
    if let Request::Active(active_seq) = request {
        return active_seq;
    }

    let Request::Direct(direct_request) = request else {
        unreachable!("Request must be either Direct or Active");
    };

    ActiveSequence::new(
        direct_request.tokens,
        direct_request.max_output_tokens,
        Some(block_size),
        enable_prefix_caching,
    )
}

/// Processes MoveBlock signals with the KvManager.
///
/// When a signal fails, this function verifies that the failure is for an expected case:
/// specifically a single signal attempting to create a single partial (generation) block.
/// This validation is important because in normal operation, the only legitimate failure
/// case should be when trying to acquire a new generation block - any other failures would
/// indicate an unexpected state in the system.
fn process_signals(
    kv_manager_guard: &mut tokio::sync::MutexGuard<'_, KvManager>,
    signals: &[MoveBlock],
) -> bool {
    for signal in signals {
        if kv_manager_guard.process(signal) {
            continue;
        }

        // Check we have a Use signal with blocks
        let MoveBlock::Use(blocks) = signal else {
            panic!("Failed signal is Invalid. Has to fail on generation signal, but failed on {signal:?}");
        };

        // Verify the signal contains exactly one block
        let num_blocks = blocks.len();
        let num_active_blocks = kv_manager_guard.num_active_blocks();
        if num_blocks != 1 {
            panic!(
                "Failed signal is Invalid. Tried to create (prefill) {num_blocks} blocks on top of {num_active_blocks} active blocks."
            );
        }

        // Verify the block is a PartialBlock (generation block)
        if !matches!(blocks[0], UniqueBlock::PartialBlock(_)) {
            panic!("Failed signal is Invalid. Generation block has to be partial.");
        }

        return false;
    }

    true
}

#[cfg(test)]
mod tests {
    use super::*;
    use rstest::rstest;
    use std::time::Duration;
    use tokio::time::interval;

    #[rstest]
    #[case::case_1(false, false, false)]
    #[case::case_2(false, true, false)]
    #[case::case_3(true, false, false)]
    #[case::case_4(true, true, false)]
    #[case::case_5(false, false, true)]
    #[case::case_6(false, true, true)]
    #[case::case_7(true, false, true)]
    #[case::case_8(true, true, true)]
    #[tokio::test]
    async fn test_scheduler_token_generation_patterns(
        #[case] use_shared_tokens: bool,
        #[case] enable_prefix_caching: bool,
        #[case] enable_chunked_prefill: bool,
    ) {
        std::env::set_var("RUST_LOG", "debug");

        let kv_capacity: usize = 500;
        let block_size: usize = 64;
        let num_requests: usize = 200;
        let input_len: usize = 1000;
        let max_output_tokens: usize = 100;

        // Create channel for token output
        let (output_tx, mut output_rx) = mpsc::unbounded_channel::<OutputSignal>();

        // Create scheduler args using builder - now including enable_prefix_caching
        let args = MockEngineArgs::builder()
            .num_gpu_blocks(kv_capacity)
            .block_size(block_size)
            .speedup_ratio(10.0)
            .enable_prefix_caching(enable_prefix_caching)
            .enable_chunked_prefill(enable_chunked_prefill)
            .build()
            .unwrap();

        // Create scheduler with new args struct
        let scheduler = Scheduler::new(args, None, Some(output_tx), None, None);

        // Create shared tokens for caching case
        let shared_tokens = if use_shared_tokens {
            Some(
                (0..input_len / 2)
                    .map(|_| rand::random::<u32>() % 50000)
                    .collect::<Vec<_>>(),
            )
        } else {
            None
        };

        // Create test requests
        for _ in 0..num_requests {
            let input_tokens = if let Some(ref shared) = shared_tokens {
                // For caching case: use shared tokens for first half, random for second half
                let mut tokens = shared.clone();
                tokens.extend((0..input_len / 2).map(|_| rand::random::<u32>() % 50000));
                tokens
            } else {
                // For random case: create unique random token vector for each request
                (0..input_len)
                    .map(|_| rand::random::<u32>() % 50000)
                    .collect::<Vec<_>>()
            };

            let request = DirectRequest {
                tokens: input_tokens,
                max_output_tokens,
                uuid: None,
                dp_rank: None,
            };
            scheduler.receive(request).await;
        }

        let start_time = std::time::Instant::now();

        // Collect all generated tokens (should be num_requests * max_output_tokens)
        let expected_tokens = num_requests * max_output_tokens;
        let mut received_tokens = 0;

        // Set up a timeout that causes the test to panic if no tokens are received for 2 seconds
        let timeout = tokio::time::sleep(Duration::from_secs(2));
        tokio::pin!(timeout);

        // Set up debug ticker interval
        let mut debug_interval = interval(Duration::from_millis(500));

        loop {
            tokio::select! {
                biased;

                // Manual debug ticker that prints forward pass metrics
                _ = debug_interval.tick() => {
                    let _metrics = scheduler.get_forward_pass_metrics().await;
                    println!("Forward Pass Metrics: {_metrics:#?}");
                }

                Some(_) = output_rx.recv() => {
                    received_tokens += 1;
                    // Reset timeout whenever we receive a token
                    timeout.set(tokio::time::sleep(Duration::from_secs(2)));
                }

                _ = &mut timeout => {
                    // Break instead of panicking when timeout occurs
                    break;
                }
            }
        }

        // Calculate and print elapsed time
        let elapsed = start_time.elapsed();
        println!(
            "Test completed in: {elapsed:?} for {} case with prefix_caching={enable_prefix_caching} and chunked_prefill={enable_chunked_prefill}",
            if use_shared_tokens {
                "caching"
            } else {
                "random"
            }
        );

        // Assert that we received the expected number of tokens
        assert!(
            received_tokens == expected_tokens,
            "Received {received_tokens} tokens but expected exactly {expected_tokens}"
        );

        let active_tokens = scheduler.active_tokens().await;
        assert!(
            active_tokens == 0,
            "Scheduler still have {active_tokens} active tokens but expected 0"
        );

        let waiting_tokens = scheduler.waiting_tokens().await;
        assert!(
            waiting_tokens == 0,
            "Scheduler still have {waiting_tokens} waiting tokens but expected 0"
        );
    }

    #[tokio::test]
    async fn test_cache_hit_rate_with_identical_requests() {
        let block_size: usize = 64;
        let max_output_tokens: usize = 10;
        let speedup_ratio = 10.0;
        let num_requests = 10;
        let token_length = 65;

        // Create channel for token output
        let (output_tx, mut output_rx) = mpsc::unbounded_channel::<OutputSignal>();

        // Create scheduler args
        let args = MockEngineArgs::builder()
            .num_gpu_blocks(100) // Large enough to not be a constraint
            .block_size(block_size)
            .speedup_ratio(speedup_ratio)
            .build()
            .unwrap();

        // Create scheduler
        let scheduler = Scheduler::new(args, None, Some(output_tx), None, None);

        // Create identical tokens for all requests
        let identical_tokens: Vec<u32> = (0..token_length).map(|i| i as u32).collect();

        // Send all requests with identical tokens
        for _ in 0..num_requests {
            let request = DirectRequest {
                tokens: identical_tokens.clone(),
                max_output_tokens,
                uuid: None,
                dp_rank: None,
            };
            scheduler.receive(request).await;
            // Sleep for 0.1 second after each request
            tokio::time::sleep(Duration::from_millis(100)).await;
        }

        // Collect all generated tokens
        let mut received_tokens = 0;

        // Set up a timeout that resets to 0.5 seconds on each received token
        let timeout = tokio::time::sleep(Duration::from_millis(500));
        tokio::pin!(timeout);

        // Set up debug ticker interval
        let mut debug_interval = interval(Duration::from_millis(500));

        loop {
            tokio::select! {
                biased;

                // Manual debug ticker that prints forward pass metrics
                _ = debug_interval.tick() => {
                    let _metrics = scheduler.get_forward_pass_metrics().await;
                    println!("Forward Pass Metrics: {_metrics:#?}");
                }

                Some(_signal) = output_rx.recv() => {
                    received_tokens += 1;
                    // Reset timeout whenever we receive a token
                    timeout.set(tokio::time::sleep(Duration::from_millis(500)));
                }

                _ = &mut timeout => {
                    // Break when timeout occurs (no more tokens for 0.5 seconds)
                    break;
                }
            }
        }

        // Verify forward pass metrics
        let metrics = scheduler.get_forward_pass_metrics().await;

        assert_eq!(
            metrics.worker_stats.num_requests_waiting, 0,
            "Expected no waiting requests, got {}",
            metrics.worker_stats.num_requests_waiting
        );

        assert!(
            metrics.kv_stats.gpu_prefix_cache_hit_rate > 0.8,
            "Expected cache hit rate > 0.8, got {}",
            metrics.kv_stats.gpu_prefix_cache_hit_rate
        );

        println!(
            "Test passed! Cache hit rate: {:.3}",
            metrics.kv_stats.gpu_prefix_cache_hit_rate
        );
        println!("Received {received_tokens} tokens");
    }

    #[tokio::test]
    async fn test_receiver_drop_cleans_up_resources() {
        let block_size: usize = 64;
        let input_tokens = 256;
        let max_output_tokens = 200; // More than we'll receive

        // Create channel for token output
        let (output_tx, mut output_rx) = mpsc::unbounded_channel::<OutputSignal>();

        // Create scheduler args
        let args = MockEngineArgs::builder()
            .num_gpu_blocks(10) // Enough for 256 tokens (4 blocks)
            .block_size(block_size)
            .speedup_ratio(100.0) // Fast simulation
            .build()
            .unwrap();

        // Create scheduler
        let scheduler = Scheduler::new(args, None, Some(output_tx), None, None);

        // Create request with 256 tokens
        let tokens: Vec<u32> = (0..input_tokens).map(|i| i as u32).collect();
        let request = DirectRequest {
            tokens,
            max_output_tokens,
            uuid: None,
            dp_rank: None,
        };

        scheduler.receive(request).await;

        // Receive exactly 129 tokens
        let mut received_count = 0;
        while received_count < 129 {
            if let Some(_signal) = output_rx.recv().await {
                received_count += 1;
            } else {
                panic!("Channel closed before receiving 129 tokens");
            }
        }

        // Drop the receiver immediately
        drop(output_rx);

        // Wait for 1 second to allow cleanup
        tokio::time::sleep(Duration::from_secs(1)).await;

        // Check forward pass metrics
        let metrics = scheduler.get_forward_pass_metrics().await;

        assert_eq!(
            metrics.kv_stats.gpu_cache_usage_perc,
            0.0,
            "Expected GPU cache usage to be 0%, got {}%",
            metrics.kv_stats.gpu_cache_usage_perc * 100.0
        );

        assert_eq!(
            metrics.kv_stats.kv_active_blocks, 0,
            "Expected 0 active blocks, got {}",
            metrics.kv_stats.kv_active_blocks
        );
    }
}