Merge pull request #804 from peastman/xml

Replaced TinyXML with irrXML

CMakeLists.txt

@@ -78,7 +78,7 @@ ENDIF(${CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT})
 
 # The source is organized into subdirectories, but we handle them all from
 # this CMakeLists file rather than letting CMake visit them as SUBDIRS.
-SET(OPENMM_SOURCE_SUBDIRS . openmmapi olla libraries/jama libraries/quern libraries/lepton libraries/sfmt libraries/lbfgs libraries/hilbert libraries/csha1 platforms/reference serialization libraries/validate)
+SET(OPENMM_SOURCE_SUBDIRS . openmmapi olla libraries/jama libraries/quern libraries/lepton libraries/sfmt libraries/lbfgs libraries/hilbert libraries/csha1 platforms/reference serialization libraries/validate libraries/irrxml)
 IF(WIN32)
     SET(OPENMM_SOURCE_SUBDIRS ${OPENMM_SOURCE_SUBDIRS} libraries/pthreads)
     ADD_CUSTOM_TARGET(PthreadsLibraries ALL)

docs-source/licenses/Licenses.txt

@@ -2,7 +2,7 @@ OpenMM was developed by Simbios, the NIH National Center for Physics-Based
 Simulation of Biological Structures at Stanford, funded under the NIH Roadmap
 for Medical Research, grant U54 GM072970. See https://simtk.org.
 
-Portions copyright � 2008-2014 Stanford University and the Authors.
+Portions copyright � 2008-2015 Stanford University and the Authors.
 
 There are several licenses which cover different parts of OpenMM as described
 below.
@@ -126,4 +126,25 @@ freely, subject to the following restrictions:
 OpenMM uses the PDBx/mmCIF parser written by John Westbrook.  It is distributed
 under the Creative Commons Attribution 3.0 Unported license.  For details, see
 https://creativecommons.org/licenses/by/3.0.  This library was modified to move
-it inside the simtk.openmm.app.internal module.
+it inside the simtk.openmm.app.internal module.
\ No newline at end of file
+
+7. irrXML
+
+OpenMM uses the irrXML library which is copyright 2002-2005 Nikolaus Gebhardt.
+It may be used under the following terms:
+
+This software is provided 'as-is', without any express or implied
+warranty.  In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not
+   claim that you wrote the original software. If you use this software
+   in a product, an acknowledgment in the product documentation would be
+   appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.

libraries/irrxml/changes.txt

+-------------------------------------------------------------------------------------
+Changes in version 1.2 (13 November 2005)
+
+- irrXML now supports CDATA.
+
+- some small bug fixes have been made, making irrXML compatible for .NET users who
+  have to struggle with the famous bool return bug in the .NET framework.
+
+- There are two new method overloads: getAttributeValueAsInt() and 
+  getAttributeValueAsFloat() now also take the index of the attribute as parameter. 
+  Thanks to Patrik Müller who suggested and implemented this initially, the same 
+  for the CDATA support.
+
+-------------------------------------------------------------------------------------
+Changes in version 1.1 (02 July 2005)
+
+- irrxml is now also able to parse embedded text correctly when it is shorter than
+  2 characters. 
+  
+- irrxml now treats whitespace quite intelligent and doesn't report it when it is
+  obviously used for formatting the xml file. (Text won't be reported when it only contains
+  whitespace and is shorter than 3 characters)
+  
+- irrxml won't crash anymore when the xml file is malformatted and an attribute has
+  an opening but no closing attribute.
+  
+- Removed a documentation which claimed that the xml parser doesn't work as the xml standard
+  when replacing special characters, which wasn't true.
+
+-------------------------------------------------------------------------------------
+Changes in version 1.0 (14 May 2005)
+
+- Initial release

libraries/irrxml/doc/readme.txt

+Linux Users: There are some tools at the web for reading .chm files (try http://xchm.sourceforge.net/).
+You can find a html version of this documentation at http://xml.irrlicht3d.org/docu/index.html
\ No newline at end of file

libraries/irrxml/example/Makefile

+# Project: irrXML
+# Makefile created by Dev-C++ 4.9.8.0
+
+CPP  = g++
+OBJ  = ../src/irrXML.o test.o 
+LINKOBJ  = ../src/irrXML.o test.o 
+LIBS =  --no-export-all-symbols --add-stdcall-alias
+CXXINCS =  -I"../src" 
+BIN  = example
+CXXFLAGS = $(CXXINCS)
+
+all: $(BIN)
+
+clean: 
+	rm -f $(OBJ) $(BIN)
+
+$(BIN): $(LINKOBJ)
+	$(CPP) $(LINKOBJ) -o $(BIN) $(LIBS)
+
+../src/irrXML.o: ../src/irrXML.cpp
+	$(CPP) -c ../src/irrXML.cpp -o ../src/irrXML.o $(CXXFLAGS)
+
+test.o: test.cpp
+	$(CPP) -c test.cpp -o test.o $(CXXFLAGS)

libraries/irrxml/example/config.xml

+<?xml version="1.0"?>
+<config>
+<!--This is a config file for the Irrlicht Engine Mesh Viewer.-->
+<startUpModel file="../../media/dwarf.x" />
+<messageText caption="Irrlicht Engine Mesh Viewer">Welcome to the Mesh Viewer of the &quot;Irrlicht Engine&quot;. This program is able to load and display all 3D geometry and models, the Irrlicht Engine can. 
+
+Controls:
+- Left mouse to rotate
+- Right mouse to move
+- Both buttons to zoom
+
+Supported formats are:
+- 3D Studio (.3ds)
+- Cartography shop 4 (.csm)
+- DirectX (.x)
+- Maya (.obj)
+- Milkshape (.ms3d)
+- My3D (.my3D) 
+- OCT (.oct)
+- Pulsar LMTools (.lmts)
+- Quake 3 levels (.bsp)
+- Quake 2 models (.md2)
+
+Please note that this program is also a demo of the user interface capabilities of the engine, so for example the combo box in the toolbar has no function.
+</messageText>
+</config>
\ No newline at end of file

libraries/irrxml/example/irrXML.dev

+[Project]
+FileName=C:\Development\Irrlicht\irrxml\example\irrXML.dev
+Name=irrXML
+Ver=1
+IsCpp=1
+Type=1
+Compiler=-D__GNUWIN32__ -W -DWIN32 -DNDEBUG -D_CONSOLE -D_MBCS 
+CppCompiler=-D__GNUWIN32__ -W -DWIN32 -DNDEBUG -D_CONSOLE -D_MBCS 
+Includes=../src
+Linker=-lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -luuid -lodbc32 -lodbccp32 -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -luuid -lodbc32 -lodbccp32 
+Libs=
+UnitCount=9
+Folders=parser
+[Unit1]
+FileName=../src/CXMLReaderImpl.h
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit2]
+FileName=../src/fast_atof.h
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit3]
+FileName=../src/heapsort.h
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit4]
+FileName=../src/irrArray.h
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit5]
+FileName=../src/irrString.h
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit6]
+FileName=../src/irrTypes.h
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit7]
+FileName=../src/irrXML.cpp
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit8]
+FileName=../src/irrXML.h
+Folder=parser
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000
+[Unit9]
+FileName=./test.cpp
+Folder=
+Compile=1
+CompileCpp=1
+Link=1
+Priority=1000

libraries/irrxml/example/irrXML.dsp

+# Microsoft Developer Studio Project File - Name="irrXML" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** NICHT BEARBEITEN **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=irrXML - Win32 Debug
+!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE
+!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl
+!MESSAGE 
+!MESSAGE NMAKE /f "irrXML.mak".
+!MESSAGE 
+!MESSAGE Sie knnen beim Ausfhren von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "irrXML.mak" CFG="irrXML - Win32 Debug"
+!MESSAGE 
+!MESSAGE Fr die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "irrXML - Win32 Release" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE "irrXML - Win32 Debug" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "irrXML - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /W3 /GX /O2 /I "../src" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD BASE RSC /l 0xc07 /d "NDEBUG"
+# ADD RSC /l 0xc07 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "irrXML - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /I "../src" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD BASE RSC /l 0xc07 /d "_DEBUG"
+# ADD RSC /l 0xc07 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "irrXML - Win32 Release"
+# Name "irrXML - Win32 Debug"
+# Begin Group "parser"
+
+# PROP Default_Filter ""
+# Begin Source File
+
+SOURCE=..\src\CXMLReaderImpl.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\src\fast_atof.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\src\heapsort.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\src\irrArray.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\src\irrString.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\src\irrTypes.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\src\irrXML.cpp
+# End Source File
+# Begin Source File
+
+SOURCE=..\src\irrXML.h
+# End Source File
+# End Group
+# Begin Source File
+
+SOURCE=.\test.cpp
+# End Source File
+# End Target
+# End Project

libraries/irrxml/example/irrXML.dsw

+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GELSCHT WERDEN!
+
+###############################################################################
+
+Project: "irrXML"=.\irrXML.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

libraries/irrxml/example/irrxml.sln

+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "irrxml", "irrxml.vcproj", "{2CDC9E2F-2CE6-4917-8BB9-DBA8E44C9A82}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{2CDC9E2F-2CE6-4917-8BB9-DBA8E44C9A82}.Debug.ActiveCfg = Debug|Win32
+		{2CDC9E2F-2CE6-4917-8BB9-DBA8E44C9A82}.Debug.Build.0 = Debug|Win32
+		{2CDC9E2F-2CE6-4917-8BB9-DBA8E44C9A82}.Release.ActiveCfg = Release|Win32
+		{2CDC9E2F-2CE6-4917-8BB9-DBA8E44C9A82}.Release.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

libraries/irrxml/example/irrxml.vcproj

+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="7.10"
+	Name="irrxml"
+	ProjectGUID="{2CDC9E2F-2CE6-4917-8BB9-DBA8E44C9A82}"
+	Keyword="Win32Proj">
+	<Platforms>
+		<Platform
+			Name="Win32"/>
+	</Platforms>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="Debug"
+			IntermediateDirectory="Debug"
+			ConfigurationType="1"
+			CharacterSet="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="../src"
+				PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE"
+				MinimalRebuild="TRUE"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="5"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="4"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)/irrxml.exe"
+				LinkIncremental="2"
+				GenerateDebugInformation="TRUE"
+				ProgramDatabaseFile="$(OutDir)/irrxml.pdb"
+				SubSystem="1"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="Release"
+			IntermediateDirectory="Release"
+			ConfigurationType="1"
+			CharacterSet="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				AdditionalIncludeDirectories="../src"
+				PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE"
+				RuntimeLibrary="4"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)/irrxml.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				TargetMachine="1"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="parser"
+			Filter="">
+			<File
+				RelativePath="..\src\CXMLReaderImpl.h">
+			</File>
+			<File
+				RelativePath="..\src\fast_atof.h">
+			</File>
+			<File
+				RelativePath="..\src\heapsort.h">
+			</File>
+			<File
+				RelativePath="..\src\irrArray.h">
+			</File>
+			<File
+				RelativePath="..\src\irrString.h">
+			</File>
+			<File
+				RelativePath="..\src\irrTypes.h">
+			</File>
+			<File
+				RelativePath="..\src\irrXML.cpp">
+			</File>
+			<File
+				RelativePath="..\src\irrXML.h">
+			</File>
+		</Filter>
+		<File
+			RelativePath=".\test.cpp">
+		</File>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

libraries/irrxml/example/test.cpp

+#include <irrXML.h>
+using namespace irr;
+using namespace io;
+
+#include <string> // we use STL strings to store data in this example
+
+int main()
+{
+	IrrXMLReader* xml = createIrrXMLReader("config.xml");
+
+	// strings for storing the data we want to get out of the file
+	std::string modelFile;
+	std::string messageText;
+	std::string caption;
+
+	// parse the file until end reached
+	while(xml && xml->read())
+	{
+		switch(xml->getNodeType())
+		{
+		case EXN_TEXT:
+			// in this xml file, the only text which occurs is the messageText
+			messageText = xml->getNodeData();
+			break;
+		case EXN_ELEMENT:
+			{
+				if (!strcmp("startUpModel", xml->getNodeName()))
+					modelFile = xml->getAttributeValue("file");
+				else
+				if (!strcmp("messageText", xml->getNodeName()))
+					caption = xml->getAttributeValue("caption");
+			}
+			break;
+		}
+	}
+
+	// delete the xml parser after usage
+	delete xml;
+	return 0;
+}

libraries/irrxml/include/CXMLReaderImpl.h

+// Copyright (C) 2002-2005 Nikolaus Gebhardt
+// This file is part of the "Irrlicht Engine" and the "irrXML" project.
+// For conditions of distribution and use, see copyright notice in irrlicht.h and/or irrXML.h
+
+#ifndef __ICXML_READER_IMPL_H_INCLUDED__
+#define __ICXML_READER_IMPL_H_INCLUDED__
+
+#include "irrXML.h"
+#include "irrString.h"
+#include "irrArray.h"
+#include "fast_atof.h"
+
+#ifdef _DEBUG
+#define IRR_DEBUGPRINT(x) printf((x));
+#else // _DEBUG 
+#define IRR_DEBUGPRINT(x)
+#endif // _DEBUG
+
+
+namespace irr
+{
+namespace io
+{
+
+
+//! implementation of the IrrXMLReader
+template<class char_type, class superclass>
+class CXMLReaderImpl : public IIrrXMLReader<char_type, superclass>
+{
+public:
+
+	//! Constructor
+	CXMLReaderImpl(IFileReadCallBack* callback, bool deleteCallBack = true)
+		: TextData(0), P(0), TextSize(0), TextBegin(0), CurrentNodeType(EXN_NONE),
+		SourceFormat(ETF_ASCII), TargetFormat(ETF_ASCII)
+	{
+		if (!callback)
+			return;
+
+		storeTargetFormat();
+
+		// read whole xml file
+
+		readFile(callback);
+		
+		// clean up
+
+		if (deleteCallBack)
+			delete callback;
+
+		// create list with special characters
+
+		createSpecialCharacterList();
+
+		// set pointer to text begin
+		P = TextBegin;
+	}
+    	
+
+	//! Destructor
+	virtual ~CXMLReaderImpl()
+	{
+		delete [] TextData;
+	}
+
+
+	//! Reads forward to the next xml node. 
+	//! \return Returns false, if there was no further node. 
+	virtual bool read()
+	{
+		// if not end reached, parse the node
+		if (P && (unsigned int)(P - TextBegin) < TextSize - 1 && *P != 0)
+		{
+			parseCurrentNode();
+			return true;
+		}
+
+		_IRR_IMPLEMENT_MANAGED_MARSHALLING_BUGFIX;
+		return false;
+	}
+
+
+	//! Returns the type of the current XML node.
+	virtual EXML_NODE getNodeType() const
+	{
+		return CurrentNodeType;
+	}
+
+
+	//! Returns attribute count of the current XML node.
+	virtual int getAttributeCount() const
+	{
+		return Attributes.size();
+	}
+
+
+	//! Returns name of an attribute.
+	virtual const char_type* getAttributeName(int idx) const
+	{
+		if (idx < 0 || idx >= (int)Attributes.size())
+			return 0;
+
+		return Attributes[idx].Name.c_str();
+	}
+
+
+	//! Returns the value of an attribute. 
+	virtual const char_type* getAttributeValue(int idx) const
+	{
+		if (idx < 0 || idx >= (int)Attributes.size())
+			return 0;
+
+		return Attributes[idx].Value.c_str();
+	}
+
+
+	//! Returns the value of an attribute. 
+	virtual const char_type* getAttributeValue(const char_type* name) const
+	{
+		const SAttribute* attr = getAttributeByName(name);
+		if (!attr)
+			return 0;
+
+		return attr->Value.c_str();
+	}
+
+
+	//! Returns the value of an attribute
+	virtual const char_type* getAttributeValueSafe(const char_type* name) const
+	{
+		const SAttribute* attr = getAttributeByName(name);
+		if (!attr)
+			return EmptyString.c_str();
+
+		return attr->Value.c_str();
+	}
+
+
+
+	//! Returns the value of an attribute as integer. 
+	int getAttributeValueAsInt(const char_type* name) const
+	{
+		return (int)getAttributeValueAsFloat(name);
+	}
+
+
+	//! Returns the value of an attribute as integer. 
+	int getAttributeValueAsInt(int idx) const
+	{
+		return (int)getAttributeValueAsFloat(idx);
+	}
+
+
+	//! Returns the value of an attribute as float. 
+	float getAttributeValueAsFloat(const char_type* name) const
+	{
+		const SAttribute* attr = getAttributeByName(name);
+		if (!attr)
+			return 0;
+
+		core::stringc c = attr->Value.c_str();
+		return core::fast_atof(c.c_str());
+	}
+
+
+	//! Returns the value of an attribute as float. 
+	float getAttributeValueAsFloat(int idx) const
+	{
+		const char_type* attrvalue = getAttributeValue(idx);
+		if (!attrvalue)
+			return 0;
+
+		core::stringc c = attrvalue;
+		return core::fast_atof(c.c_str());
+	}
+
+
+	//! Returns the name of the current node.
+	virtual const char_type* getNodeName() const
+	{
+		return NodeName.c_str();
+	}
+
+
+	//! Returns data of the current node.
+	virtual const char_type* getNodeData() const
+	{
+		return NodeName.c_str();
+	}
+
+
+	//! Returns if an element is an empty element, like <foo />
+	virtual bool isEmptyElement() const
+	{
+		return IsEmptyElement;
+	}
+
+	//! Returns format of the source xml file.
+	virtual ETEXT_FORMAT getSourceFormat() const
+	{
+		return SourceFormat;
+	}
+
+	//! Returns format of the strings returned by the parser.
+	virtual ETEXT_FORMAT getParserFormat() const
+	{
+		return TargetFormat;
+	}
+
+private:
+
+	// Reads the current xml node
+	void parseCurrentNode()
+	{
+		char_type* start = P;
+
+		// more forward until '<' found
+		while(*P != L'<' && *P)
+			++P;
+
+		if (!*P)
+			return;
+
+		if (P - start > 0)
+		{
+			// we found some text, store it
+			if (setText(start, P))
+				return;
+		}
+
+		++P;
+
+		// based on current token, parse and report next element
+		switch(*P)
+		{
+		case L'/':
+			parseClosingXMLElement(); 
+			break;
+		case L'?':
+			ignoreDefinition();	
+			break;
+		case L'!':
+			if (!parseCDATA())
+				parseComment();	
+			break;
+		default:
+			parseOpeningXMLElement();
+			break;
+		}
+	}
+
+
+	//! sets the state that text was found. Returns true if set should be set
+	bool setText(char_type* start, char_type* end)
+	{
+		// check if text is more than 2 characters, and if not, check if there is 
+		// only white space, so that this text won't be reported
+		if (end - start < 3)
+		{
+			char_type* p = start;
+			for(; p != end; ++p)
+				if (!isWhiteSpace(*p))
+					break;
+
+			if (p == end)
+				return false;
+		}
+
+		// set current text to the parsed text, and replace xml special characters
+		core::string<char_type> s(start, (int)(end - start));
+		NodeName = replaceSpecialCharacters(s);
+
+		// current XML node type is text
+		CurrentNodeType = EXN_TEXT;
+
+		return true;
+	}
+
+
+
+	//! ignores an xml definition like <?xml something />
+	void ignoreDefinition()
+	{
+		CurrentNodeType = EXN_UNKNOWN;
+
+		// move until end marked with '>' reached
+		while(*P != L'>')
+			++P;
+
+		++P;
+	}
+
+
+	//! parses a comment
+	void parseComment()
+	{
+		CurrentNodeType = EXN_COMMENT;
+		P += 1;
+
+		char_type *pCommentBegin = P;
+
+		int count = 1;
+
+		// move until end of comment reached
+		while(count)
+		{
+			if (*P == L'>')
+				--count;
+			else
+			if (*P == L'<')
+				++count;
+
+			++P;
+		}
+
+		P -= 3;
+		NodeName = core::string<char_type>(pCommentBegin+2, (int)(P - pCommentBegin-2));
+		P += 3;
+	}
+
+
+	//! parses an opening xml element and reads attributes
+	void parseOpeningXMLElement()
+	{
+		CurrentNodeType = EXN_ELEMENT;
+		IsEmptyElement = false;
+		Attributes.clear();
+
+		// find name
+		const char_type* startName = P;
+
+		// find end of element
+		while(*P != L'>' && !isWhiteSpace(*P))
+			++P;
+
+		const char_type* endName = P;
+
+		// find Attributes
+		while(*P != L'>')
+		{
+			if (isWhiteSpace(*P))
+				++P;
+			else
+			{
+				if (*P != L'/')
+				{
+					// we've got an attribute
+
+					// read the attribute names
+					const char_type* attributeNameBegin = P;
+
+					while(!isWhiteSpace(*P) && *P != L'=')
+						++P;
+
+					const char_type* attributeNameEnd = P;
+					++P;
+
+					// read the attribute value
+					// check for quotes and single quotes, thx to murphy
+					while( (*P != L'\"') && (*P != L'\'') && *P) 
+						++P;
+
+					if (!*P) // malformatted xml file
+						return;
+
+					const char_type attributeQuoteChar = *P;
+
+					++P;
+					const char_type* attributeValueBegin = P;
+					
+					while(*P != attributeQuoteChar && *P)
+						++P;
+
+					if (!*P) // malformatted xml file
+						return;
+
+					const char_type* attributeValueEnd = P;
+					++P;
+
+					SAttribute attr;
+					attr.Name = core::string<char_type>(attributeNameBegin, 
+						(int)(attributeNameEnd - attributeNameBegin));
+
+					core::string<char_type> s(attributeValueBegin, 
+						(int)(attributeValueEnd - attributeValueBegin));
+
+					attr.Value = replaceSpecialCharacters(s);
+					Attributes.push_back(attr);
+				}
+				else
+				{
+					// tag is closed directly
+					++P;
+					IsEmptyElement = true;
+					break;
+				}
+			}
+		}
+
+		// check if this tag is closing directly
+		if (endName > startName && *(endName-1) == L'/')
+		{
+			// directly closing tag
+			IsEmptyElement = true;
+			endName--;
+		}
+		
+		NodeName = core::string<char_type>(startName, (int)(endName - startName));
+
+		++P;
+	}
+
+
+	//! parses an closing xml tag
+	void parseClosingXMLElement()
+	{
+		CurrentNodeType = EXN_ELEMENT_END;
+		IsEmptyElement = false;
+		Attributes.clear();
+
+		++P;
+		const char_type* pBeginClose = P;
+
+		while(*P != L'>')
+			++P;
+
+		NodeName = core::string<char_type>(pBeginClose, (int)(P - pBeginClose));
+		++P;
+	}
+
+	//! parses a possible CDATA section, returns false if begin was not a CDATA section
+	bool parseCDATA()
+	{
+		if (*(P+1) != L'[')
+			return false;
+
+		CurrentNodeType = EXN_CDATA;
+
+		// skip '<![CDATA['
+		int count=0;
+		while( *P && count<8 )
+		{
+			++P;
+			++count;
+		}
+
+		if (!*P)
+			return true;
+
+		char_type *cDataBegin = P;
+		char_type *cDataEnd = 0;
+
+		// find end of CDATA
+		while(*P && !cDataEnd)
+		{
+			if (*P == L'>' && 
+			   (*(P-1) == L']') &&
+			   (*(P-2) == L']'))
+			{
+				cDataEnd = P - 2;
+			}
+
+			++P;
+		}
+
+		if ( cDataEnd )
+			NodeName = core::string<char_type>(cDataBegin, (int)(cDataEnd - cDataBegin));
+		else
+			NodeName = "";
+
+		return true;
+	}
+
+
+	// structure for storing attribute-name pairs
+	struct SAttribute
+	{
+		core::string<char_type> Name;
+		core::string<char_type> Value;
+	};
+
+	// finds a current attribute by name, returns 0 if not found
+	const SAttribute* getAttributeByName(const char_type* name) const
+	{
+		if (!name)
+			return 0;
+
+		core::string<char_type> n = name;
+
+		for (int i=0; i<(int)Attributes.size(); ++i)
+			if (Attributes[i].Name == n)
+				return &Attributes[i];
+
+		return 0;
+	}
+
+	// replaces xml special characters in a string and creates a new one
+	core::string<char_type> replaceSpecialCharacters(
+		core::string<char_type>& origstr)
+	{
+		int pos = origstr.findFirst(L'&');
+		int oldPos = 0;
+
+		if (pos == -1)
+			return origstr;
+
+		core::string<char_type> newstr;
+
+		while(pos != -1 && pos < origstr.size()-2)
+		{
+			// check if it is one of the special characters
+
+			int specialChar = -1;
+			for (int i=0; i<(int)SpecialCharacters.size(); ++i)
+			{
+				const char_type* p = &origstr.c_str()[pos]+1;
+
+				if (equalsn(&SpecialCharacters[i][1], p, SpecialCharacters[i].size()-1))
+				{
+					specialChar = i;
+					break;
+				}
+			}
+
+			if (specialChar != -1)
+			{
+				newstr.append(origstr.subString(oldPos, pos - oldPos));
+				newstr.append(SpecialCharacters[specialChar][0]);
+				pos += SpecialCharacters[specialChar].size();
+			}
+			else
+			{
+				newstr.append(origstr.subString(oldPos, pos - oldPos + 1));
+				pos += 1;
+			}
+
+			// find next &
+			oldPos = pos;
+			pos = origstr.findNext(L'&', pos);		
+		}
+
+		if (oldPos < origstr.size()-1)
+			newstr.append(origstr.subString(oldPos, origstr.size()-oldPos));
+
+		return newstr;
+	}
+
+
+
+	//! reads the xml file and converts it into the wanted character format.
+	bool readFile(IFileReadCallBack* callback)
+	{
+		int size = callback->getSize();		
+		size += 4; // We need two terminating 0's at the end.
+		           // For ASCII we need 1 0's, for UTF-16 2, for UTF-32 4.
+
+		char* data8 = new char[size];
+
+		if (!callback->read(data8, size-4))
+		{
+			delete [] data8;
+			return false;
+		}
+
+		// add zeros at end
+
+		data8[size-1] = 0;
+		data8[size-2] = 0;
+		data8[size-3] = 0;
+		data8[size-4] = 0;
+
+		char16* data16 = reinterpret_cast<char16*>(data8);
+		char32* data32 = reinterpret_cast<char32*>(data8);	
+
+		// now we need to convert the data to the desired target format
+		// based on the byte order mark.
+
+		const unsigned char UTF8[] = {0xEF, 0xBB, 0xBF}; // 0xEFBBBF;
+		const int UTF16_BE = 0xFFFE;
+		const int UTF16_LE = 0xFEFF;
+		const int UTF32_BE = 0xFFFE0000;
+		const int UTF32_LE = 0x0000FEFF;
+
+		// check source for all utf versions and convert to target data format
+		
+		if (size >= 4 && data32[0] == (char32)UTF32_BE)
+		{
+			// UTF-32, big endian
+			SourceFormat = ETF_UTF32_BE;
+			convertTextData(data32+1, data8, (size/4)); // data32+1 because we need to skip the header
+		}
+		else
+		if (size >= 4 && data32[0] == (char32)UTF32_LE)
+		{
+			// UTF-32, little endian
+			SourceFormat = ETF_UTF32_LE;
+			convertTextData(data32+1, data8, (size/4)); // data32+1 because we need to skip the header
+		}
+		else
+		if (size >= 2 && data16[0] == UTF16_BE)
+		{
+			// UTF-16, big endian
+			SourceFormat = ETF_UTF16_BE;
+			convertTextData(data16+1, data8, (size/2)); // data16+1 because we need to skip the header
+		}
+		else
+		if (size >= 2 && data16[0] == UTF16_LE)
+		{
+			// UTF-16, little endian
+			SourceFormat = ETF_UTF16_LE;
+			convertTextData(data16+1, data8, (size/2)); // data16+1 because we need to skip the header
+		}
+		else
+		if (size >= 3 && data8[0] == UTF8[0] && data8[1] == UTF8[1] && data8[2] == UTF8[2])
+		{
+			// UTF-8
+			SourceFormat = ETF_UTF8;
+			convertTextData(data8+3, data8, size); // data8+3 because we need to skip the header
+		}
+		else
+		{
+			// ASCII
+			SourceFormat = ETF_ASCII;
+			convertTextData(data8, data8, size);
+		}
+
+		return true;
+	}
+
+
+	//! converts the text file into the desired format.
+	//! \param source: begin of the text (without byte order mark)
+	//! \param pointerToStore: pointer to text data block which can be
+	//! stored or deleted based on the nesessary conversion.
+	//! \param sizeWithoutHeader: Text size in characters without header
+	template<class src_char_type>
+	void convertTextData(src_char_type* source, char* pointerToStore, int sizeWithoutHeader)
+	{
+		// convert little to big endian if necessary
+		if (sizeof(src_char_type) > 1 && 
+			isLittleEndian(TargetFormat) != isLittleEndian(SourceFormat))
+			convertToLittleEndian(source);
+
+		// check if conversion is necessary:
+		if (sizeof(src_char_type) == sizeof(char_type))
+		{
+			// no need to convert
+			TextBegin = (char_type*)source;
+			TextData = (char_type*)pointerToStore;
+			TextSize = sizeWithoutHeader;
+		}
+		else
+		{
+			// convert source into target data format. 
+			// TODO: implement a real conversion. This one just 
+			// copies bytes. This is a problem when there are 
+			// unicode symbols using more than one character.
+
+			TextData = new char_type[sizeWithoutHeader];
+
+			for (int i=0; i<sizeWithoutHeader; ++i)
+				TextData[i] = (char_type)source[i];
+
+			TextBegin = TextData;
+			TextSize = sizeWithoutHeader;
+
+			// delete original data because no longer needed
+			delete [] pointerToStore;
+		}
+	}
+
+	//! converts whole text buffer to little endian
+	template<class src_char_type>
+	void convertToLittleEndian(src_char_type* t)
+	{
+		if (sizeof(src_char_type) == 4) 
+		{
+			// 32 bit
+
+			while(*t)
+			{
+				*t = ((*t & 0xff000000) >> 24) |
+				     ((*t & 0x00ff0000) >> 8)  |
+				     ((*t & 0x0000ff00) << 8)  |
+				     ((*t & 0x000000ff) << 24);
+				++t;
+			}
+		}
+		else
+		{
+			// 16 bit 
+
+			while(*t)
+			{
+				*t = (*t >> 8) | (*t << 8);
+				++t;
+			}
+		}
+	}
+
+	//! returns if a format is little endian
+	inline bool isLittleEndian(ETEXT_FORMAT f)
+	{
+		return f == ETF_ASCII ||
+		       f == ETF_UTF8 ||
+		       f == ETF_UTF16_LE ||
+		       f == ETF_UTF32_LE;
+	}
+
+
+	//! returns true if a character is whitespace
+	inline bool isWhiteSpace(char_type c)
+	{
+		return (c==' ' || c=='\t' || c=='\n' || c=='\r');
+	}
+
+
+	//! generates a list with xml special characters
+	void createSpecialCharacterList()
+	{
+		// list of strings containing special symbols, 
+		// the first character is the special character,
+		// the following is the symbol string without trailing &.
+
+		SpecialCharacters.push_back("&amp;");
+		SpecialCharacters.push_back("<lt;");
+		SpecialCharacters.push_back(">gt;");
+		SpecialCharacters.push_back("\"quot;");
+		SpecialCharacters.push_back("'apos;");
+		
+	}
+
+
+	//! compares the first n characters of the strings
+	bool equalsn(const char_type* str1, const char_type* str2, int len)
+	{
+		int i;
+		for(i=0; str1[i] && str2[i] && i < len; ++i)
+			if (str1[i] != str2[i])
+				return false;
+
+		// if one (or both) of the strings was smaller then they
+		// are only equal if they have the same lenght
+		return (i == len) || (str1[i] == 0 && str2[i] == 0);
+	}
+
+
+	//! stores the target text format
+	void storeTargetFormat()
+	{
+		// get target format. We could have done this using template specialization,
+		// but VisualStudio 6 don't like it and we want to support it.
+
+		switch(sizeof(char_type))
+		{
+		case 1: 
+			TargetFormat = ETF_UTF8;
+			break;
+		case 2: 
+			TargetFormat = ETF_UTF16_LE;
+			break;
+		case 4: 
+			TargetFormat = ETF_UTF32_LE;
+			break;
+		default:
+			TargetFormat = ETF_ASCII; // should never happen.
+		}
+	}
+
+
+	// instance variables:
+
+	char_type* TextData;         // data block of the text file
+	char_type* P;                // current point in text to parse
+	char_type* TextBegin;        // start of text to parse
+	unsigned int TextSize;       // size of text to parse in characters, not bytes
+
+	EXML_NODE CurrentNodeType;   // type of the currently parsed node
+	ETEXT_FORMAT SourceFormat;   // source format of the xml file
+	ETEXT_FORMAT TargetFormat;   // output format of this parser
+
+	core::string<char_type> NodeName;    // name of the node currently in
+	core::string<char_type> EmptyString; // empty string to be returned by getSafe() methods
+
+	bool IsEmptyElement;       // is the currently parsed node empty?
+
+	core::array< core::string<char_type> > SpecialCharacters; // see createSpecialCharacterList()
+
+	core::array<SAttribute> Attributes; // attributes of current element
+	
+}; // end CXMLReaderImpl
+
+
+} // end namespace
+} // end namespace
+
+#endif

libraries/irrxml/include/fast_atof.h

+// Copyright (C) 2002-2005 Nikolaus Gebhardt
+// This file is part of the "Irrlicht Engine" and the "irrXML" project.
+// For conditions of distribution and use, see copyright notice in irrlicht.h and irrXML.h
+
+#ifndef __FAST_A_TO_F_H_INCLUDED__
+#define __FAST_A_TO_F_H_INCLUDED__
+
+#include <stdlib.h>
+#include <math.h>
+
+namespace irr
+{
+namespace core
+{
+
+const float fast_atof_table[] =	{
+										0.f,
+										0.1f,
+										0.01f,
+										0.001f,
+										0.0001f,
+										0.00001f,
+										0.000001f,
+										0.0000001f,
+										0.00000001f,
+										0.000000001f,
+										0.0000000001f,
+										0.00000000001f,
+										0.000000000001f,
+										0.0000000000001f,
+										0.00000000000001f,
+										0.000000000000001f
+									};
+
+//! Provides a fast function for converting a string into a float,
+//! about 6 times faster than atof in win32.
+// If you find any bugs, please send them to me, niko (at) irrlicht3d.org.
+inline char* fast_atof_move(char* c, float& out)
+{
+	bool inv = false;
+	char *t;
+	float f;
+
+	if (*c=='-')
+	{
+		c++;
+		inv = true;
+	}
+
+	f = (float)strtol(c, &t, 10);
+
+	c = t;
+
+	if (*c == '.')
+	{
+		c++;
+
+		float pl = (float)strtol(c, &t, 10);
+		pl *= fast_atof_table[t-c];
+
+		f += pl;
+
+		c = t;
+
+		if (*c == 'e')
+		{
+			++c;
+			float exp = (float)strtol(c, &t, 10);
+			f *= (float)pow(10.0f, exp);
+			c = t;
+		}
+	}
+
+	if (inv)
+		f *= -1.0f;
+	
+	out = f;
+	return c;
+}
+
+//! Provides a fast function for converting a string into a float,
+//! about 6 times faster than atof in win32.
+// If you find any bugs, please send them to me, niko (at) irrlicht3d.org.
+inline const char* fast_atof_move_const(const char* c, float& out)
+{
+	bool inv = false;
+	char *t;
+	float f;
+
+	if (*c=='-')
+	{
+		c++;
+		inv = true;
+	}
+
+	f = (float)strtol(c, &t, 10);
+
+	c = t;
+
+	if (*c == '.')
+	{
+		c++;
+
+		float pl = (float)strtol(c, &t, 10);
+		pl *= fast_atof_table[t-c];
+
+		f += pl;
+
+		c = t;
+
+		if (*c == 'e') 
+		{ 
+			++c; 
+			f32 exp = (f32)strtol(c, &t, 10); 
+			f *= (f32)powf(10.0f, exp); 
+			c = t; 
+		}
+	}
+
+	if (inv)
+		f *= -1.0f;
+	
+	out = f;
+	return c;
+}
+
+
+inline float fast_atof(const char* c)
+{
+	float ret;
+	fast_atof_move_const(c, ret);
+	return ret;
+}
+
+} // end namespace core
+}// end namespace irr
+
+#endif
+

libraries/irrxml/include/heapsort.h

+// Copyright (C) 2002-2005 Nikolaus Gebhardt
+// This file is part of the "Irrlicht Engine".
+// For conditions of distribution and use, see copyright notice in irrlicht.h
+
+#ifndef __IRR_HEAPSORT_H_INCLUDED__
+#define __IRR_HEAPSORT_H_INCLUDED__
+
+#include "irrTypes.h"
+
+namespace irr
+{
+namespace core
+{
+
+//! Sinks an element into the heap.
+template<class T>
+inline void heapsink(T*array, s32 element, s32 max)
+{
+	while ((element<<1) < max)	// there is a left child
+	{
+		s32 j = (element<<1);
+	
+		if (j+1 < max && array[j] < array[j+1])
+			j = j+1;							// take right child
+
+		if (array[element] < array[j])
+		{
+			T t = array[j];						// swap elements
+			array[j] = array[element];
+			array[element] = t;
+			element = j;
+		}
+		else
+			return;
+	}
+}
+
+
+//! Sorts an array with size 'size' using heapsort.
+template<class T>
+inline void heapsort(T* array_, s32 size)
+{
+	// for heapsink we pretent this is not c++, where
+	// arrays start with index 0. So we decrease the array pointer,
+	// the maximum always +2 and the element always +1
+
+	T* virtualArray = array_ - 1;
+	s32 virtualSize = size + 2;
+	s32 i;
+
+	// build heap
+
+	for (i=((size-1)/2); i>=0; --i)	
+		heapsink(virtualArray, i+1, virtualSize-1);
+
+	// sort array
+
+	for (i=size-1; i>=0; --i)	
+	{
+		T t = array_[0];
+		array_[0] = array_[i];
+		array_[i] = t;
+		heapsink(virtualArray, 1, i + 1);
+	}
+}
+
+} // end namespace core
+} // end namespace irr
+
+
+
+#endif
+

libraries/irrxml/include/irrArray.h

+// Copyright (C) 2002-2005 Nikolaus Gebhardt
+// This file is part of the "Irrlicht Engine" and the "irrXML" project.
+// For conditions of distribution and use, see copyright notice in irrlicht.h and irrXML.h
+
+#ifndef __IRR_ARRAY_H_INCLUDED__
+#define __IRR_ARRAY_H_INCLUDED__
+
+#include "irrTypes.h"
+#include "heapsort.h"
+
+namespace irr
+{
+namespace core
+{
+
+//!	Self reallocating template array (like stl vector) with additional features.
+/** Some features are: Heap sorting, binary search methods, easier debugging.
+*/
+template <class T>
+class array
+{
+
+public:
+
+	array()
+		: data(0), used(0), allocated(0),
+			free_when_destroyed(true), is_sorted(true)
+	{
+	}
+
+	//! Constructs a array and allocates an initial chunk of memory.
+	//! \param start_count: Amount of elements to allocate.
+	array(u32 start_count)
+		: data(0), used(0), allocated(0),
+			free_when_destroyed(true),	is_sorted(true)
+	{
+		reallocate(start_count);
+	}
+
+
+	//! Copy constructor
+	array(const array<T>& other)
+		: data(0)
+	{
+		*this = other;
+	}
+
+
+
+	//! Destructor. Frees allocated memory, if set_free_when_destroyed
+	//! was not set to false by the user before.
+	~array()
+	{
+		if (free_when_destroyed)
+			delete [] data;
+	}
+
+
+
+	//! Reallocates the array, make it bigger or smaller.
+	//! \param new_size: New size of array.
+	void reallocate(u32 new_size)
+	{
+		T* old_data = data;
+
+		data = new T[new_size];
+		allocated = new_size;
+		
+		s32 end = used < new_size ? used : new_size;
+		for (s32 i=0; i<end; ++i)
+			data[i] = old_data[i];
+
+		if (allocated < used)
+			used = allocated;
+		
+		delete [] old_data;
+	}
+
+	//! Adds an element at back of array. If the array is to small to 
+	//! add this new element, the array is made bigger.
+	//! \param element: Element to add at the back of the array.
+	void push_back(const T& element)
+	{
+		if (used + 1 > allocated)
+		{
+			// reallocate(used * 2 +1);
+			// this doesn't work if the element is in the same array. So
+			// we'll copy the element first to be sure we'll get no data
+			// corruption
+
+			T e;
+			e = element;           // copy element
+			reallocate(used * 2 +1); // increase data block
+			data[used++] = e;        // push_back
+			is_sorted = false; 
+			return;
+		}
+
+		data[used++] = element;
+		is_sorted = false;
+	}
+
+
+	//! Adds an element at the front of the array. If the array is to small to 
+	//! add this new element, the array is made bigger. Please note that this
+	//! is slow, because the whole array needs to be copied for this.
+	//! \param element: Element to add at the back of the array.
+	void push_front(const T& element)
+	{
+		if (used + 1 > allocated)
+			reallocate(used * 2 +1);
+
+		for (int i=(int)used; i>0; --i)
+			data[i] = data[i-1];
+
+		data[0] = element;
+		is_sorted = false;
+		++used;
+	}
+
+	
+	//! Insert item into array at specified position. Please use this
+	//! only if you know what you are doing (possible performance loss). 
+	//! The preferred method of adding elements should be push_back().
+	//! \param element: Element to be inserted
+	//! \param index: Where position to insert the new element.
+	void insert(const T& element, u32 index=0) 
+	{
+		_IRR_DEBUG_BREAK_IF(index>used) // access violation
+
+		if (used + 1 > allocated)
+			reallocate(used * 2 +1);
+
+		for (u32 i=used++; i>index; i--) 
+			data[i] = data[i-1];
+
+		data[index] = element;
+		is_sorted = false;
+	}
+
+
+
+
+	//! Clears the array and deletes all allocated memory.
+	void clear()
+	{
+		delete [] data;
+		data = 0;
+		used = 0;
+		allocated = 0;
+		is_sorted = true;
+	}
+
+
+
+	//! Sets pointer to new array, using this as new workspace.
+	//! \param newPointer: Pointer to new array of elements.
+	//! \param size: Size of the new array.
+	void set_pointer(T* newPointer, u32 size)
+	{
+		delete [] data;
+		data = newPointer;
+		allocated = size;
+		used = size;
+		is_sorted = false;
+	}
+
+
+
+	//! Sets if the array should delete the memory it used.
+	//! \param f: If true, the array frees the allocated memory in its
+	//! destructor, otherwise not. The default is true.
+	void set_free_when_destroyed(bool f)
+	{
+		free_when_destroyed = f;
+	}
+
+
+
+	//! Sets the size of the array.
+	//! \param usedNow: Amount of elements now used.
+	void set_used(u32 usedNow)
+	{
+		if (allocated < usedNow)
+			reallocate(usedNow);
+
+		used = usedNow;
+	}
+
+
+
+	//! Assignement operator
+	void operator=(const array<T>& other)
+	{
+		if (data)
+			delete [] data;
+
+		//if (allocated < other.allocated)
+		if (other.allocated == 0)
+			data = 0;
+		else
+			data = new T[other.allocated];
+
+		used = other.used;
+		free_when_destroyed = other.free_when_destroyed;
+		is_sorted = other.is_sorted;
+		allocated = other.allocated;
+
+		for (u32 i=0; i<other.used; ++i)
+			data[i] = other.data[i];
+	}
+
+
+	//! Direct access operator
+	T& operator [](u32 index)
+	{
+		_IRR_DEBUG_BREAK_IF(index>=used) // access violation
+
+		return data[index];
+	}
+
+
+
+	//! Direct access operator
+	const T& operator [](u32 index) const
+	{
+		_IRR_DEBUG_BREAK_IF(index>=used) // access violation
+
+		return data[index];
+	}
+
+    //! Gets last frame
+	const T& getLast() const
+	{
+		_IRR_DEBUG_BREAK_IF(!used) // access violation
+
+		return data[used-1];
+	}
+
+    //! Gets last frame
+	T& getLast()
+	{
+		_IRR_DEBUG_BREAK_IF(!used) // access violation
+
+		return data[used-1];
+	}
+    
+
+	//! Returns a pointer to the array.
+	//! \return Pointer to the array.
+	T* pointer()
+	{
+		return data;
+	}
+
+
+
+	//! Returns a const pointer to the array.
+	//! \return Pointer to the array.
+	const T* const_pointer() const
+	{
+		return data;
+	}
+
+
+
+	//! Returns size of used array.
+	//! \return Size of elements in the array.
+	u32 size() const
+	{
+		return used;
+	}
+
+
+
+	//! Returns amount memory allocated.
+	//! \return Returns amount of memory allocated. The amount of bytes
+	//! allocated would  be allocated_size() * sizeof(ElementsUsed);
+	u32 allocated_size() const
+	{
+		return allocated;
+	}
+
+
+
+	//! Returns true if array is empty
+	//! \return True if the array is empty, false if not.
+	bool empty() const
+	{
+		return used == 0;
+	}
+
+
+
+	//! Sorts the array using heapsort. There is no additional memory waste and
+	//! the algorithm performs (O) n log n in worst case.
+	void sort()
+	{
+		if (is_sorted || used<2)
+			return;
+
+		heapsort(data, used);
+		is_sorted = true;
+	}
+
+
+
+	//! Performs a binary search for an element, returns -1 if not found.
+	//! The array will be sorted before the binary search if it is not
+	//! already sorted.
+	//! \param element: Element to search for.
+	//! \return Returns position of the searched element if it was found,
+	//! otherwise -1 is returned.
+	s32 binary_search(const T& element)
+	{
+		return binary_search(element, 0, used-1);
+	}
+
+
+
+	//! Performs a binary search for an element, returns -1 if not found.
+	//! The array will be sorted before the binary search if it is not
+	//! already sorted.
+	//! \param element: Element to search for.
+	//! \param left: First left index
+	//! \param right: Last right index.
+	//! \return Returns position of the searched element if it was found,
+	//! otherwise -1 is returned.
+	s32 binary_search(const T& element, s32 left, s32 right)
+	{
+		if (!used)
+			return -1;
+
+		sort();
+
+		s32 m;
+
+		do
+		{
+			m = (left+right)>>1;
+
+			if (element < data[m])
+				right = m - 1;
+			else
+				left = m + 1;
+
+		} while((element < data[m] || data[m] < element) && left<=right);
+
+		// this last line equals to:
+		// " while((element != array[m]) && left<=right);"
+		// but we only want to use the '<' operator.
+		// the same in next line, it is "(element == array[m])"
+
+		if (!(element < data[m]) && !(data[m] < element))
+			return m;
+
+		return -1;
+	}
+
+
+	//! Finds an element in linear time, which is very slow. Use
+	//! binary_search for faster finding. Only works if =operator is implemented.
+	//! \param element: Element to search for.
+	//! \return Returns position of the searched element if it was found,
+	//! otherwise -1 is returned.
+	s32 linear_search(T& element)
+	{
+		for (u32 i=0; i<used; ++i)
+			if (!(element < data[i]) && !(data[i] < element))
+				return (s32)i;
+
+		return -1;
+	}
+
+
+	//! Finds an element in linear time, which is very slow. Use
+	//! binary_search for faster finding. Only works if =operator is implemented.
+	//! \param element: Element to search for.
+	//! \return Returns position of the searched element if it was found,
+	//! otherwise -1 is returned.
+	s32 linear_reverse_search(T& element)
+	{
+		for (s32 i=used-1; i>=0; --i)
+			if (data[i] == element)
+				return (s32)i;
+
+		return -1;
+	}
+
+
+
+	//! Erases an element from the array. May be slow, because all elements 
+	//! following after the erased element have to be copied.
+	//! \param index: Index of element to be erased.
+	void erase(u32 index)
+	{
+		_IRR_DEBUG_BREAK_IF(index>=used || index<0) // access violation
+
+		for (u32 i=index+1; i<used; ++i)
+			data[i-1] = data[i];
+
+		--used;
+	}
+
+
+	//! Erases some elements from the array. may be slow, because all elements 
+	//! following after the erased element have to be copied.
+	//! \param index: Index of the first element to be erased.
+	//! \param count: Amount of elements to be erased.
+	void erase(u32 index, s32 count)
+	{
+		_IRR_DEBUG_BREAK_IF(index>=used || index<0 || count<1 || index+count>used) // access violation
+
+		for (u32 i=index+count; i<used; ++i)
+			data[i-count] = data[i];
+
+		used-= count;
+	}
+
+
+	//! Sets if the array is sorted
+	void set_sorted(bool _is_sorted)
+	{
+		is_sorted = _is_sorted;
+	}
+
+			
+	private:
+
+		T* data;
+		u32 allocated;
+		u32 used;
+		bool free_when_destroyed;
+		bool is_sorted;
+};
+
+
+} // end namespace core
+} // end namespace irr
+
+
+
+#endif
+

libraries/irrxml/include/irrString.h

+// Copyright (C) 2002-2005 Nikolaus Gebhardt
+// This file is part of the "Irrlicht Engine" and the "irrXML" project.
+// For conditions of distribution and use, see copyright notice in irrlicht.h and irrXML.h
+
+#ifndef __IRR_STRING_H_INCLUDED__
+#define __IRR_STRING_H_INCLUDED__
+
+#include "irrTypes.h"
+
+namespace irr
+{
+namespace core
+{
+
+//!	Very simple string class with some useful features.
+/**	string<c8> and string<wchar_t> work both with unicode AND ascii,
+so you can assign unicode to string<c8> and ascii to string<wchar_t> 
+(and the other way round) if your ever would want to. 
+Note that the conversation between both is not done using an encoding.
+
+Known bugs:
+Special characters like 'Ä', 'Ü' and 'Ö' are ignored in the
+methods make_upper, make_lower and equals_ignore_case.
+*/
+template <class T>
+class string
+{
+public:
+
+	//! Default constructor
+	string()
+	: allocated(1), used(1), array(0)
+	{
+		array = new T[1];
+		array[0] = 0x0;
+	}
+
+
+
+	//! Constructor
+	string(const string<T>& other)
+	: allocated(0), used(0), array(0)
+	{
+		*this = other;
+	}
+
+
+	//! Constructs a string from an int
+	string(int number)
+	: allocated(0), used(0), array(0)
+	{
+		// store if negative and make positive
+
+		bool negative = false;
+		if (number < 0)
+		{
+			number *= -1;
+			negative = true;
+		}
+
+		// temporary buffer for 16 numbers
+
+		c8 tmpbuf[16];
+		tmpbuf[15] = 0;
+		s32 idx = 15;	
+
+		// special case '0'
+
+		if (!number) 
+		{
+			tmpbuf[14] = '0';
+			*this = &tmpbuf[14];
+			return;
+		}
+
+		// add numbers
+
+		while(number && idx)
+		{
+			idx--;	
+			tmpbuf[idx] = (c8)('0' + (number % 10));
+			number = number / 10;					
+		}
+
+		// add sign
+
+		if (negative)
+		{
+			idx--;
+			tmpbuf[idx] = '-';			
+		}
+
+		*this = &tmpbuf[idx];
+	}
+
+
+
+	//! Constructor for copying a string from a pointer with a given lenght
+	template <class B>
+	string(const B* c, s32 lenght)
+	: allocated(0), used(0), array(0)
+	{
+		if (!c)
+			return;
+
+        allocated = used = lenght+1;
+		array = new T[used];
+
+		for (s32 l = 0; l<lenght; ++l)
+			array[l] = (T)c[l];
+
+		array[lenght] = 0;
+	}
+
+
+
+	//! Constructor for unicode and ascii strings
+	template <class B>
+	string(const B* c)
+	: allocated(0), used(0), array(0)
+	{
+		*this = c;
+	}
+
+
+
+	//! destructor
+	~string()
+	{
+		delete [] array;
+	}
+
+
+
+	//! Assignment operator
+	string<T>& operator=(const string<T>& other) 
+	{
+		if (this == &other)
+			return *this;
+
+		delete [] array;
+		allocated = used = other.size()+1;
+		array = new T[used];
+
+		const T* p = other.c_str();
+		for (s32 i=0; i<used; ++i, ++p)
+			array[i] = *p;
+
+		return *this;
+	}
+
+
+
+	//! Assignment operator for strings, ascii and unicode
+	template <class B>
+	string<T>& operator=(const B* c) 
+	{
+		if (!c)
+		{
+			if (!array)
+			{
+				array = new T[1];
+				allocated = 1;
+				used = 1;
+			}
+			array[0] = 0x0;
+			return *this;
+		}
+
+		if ((void*)c == (void*)array)
+			return *this;
+
+		s32 len = 0;
+		const B* p = c;
+		while(*p)
+		{
+			++len;
+			++p;
+		}
+
+		// we'll take the old string for a while, because the new string could be
+		// a part of the current string.
+		T* oldArray = array;
+
+        allocated = used = len+1;
+		array = new T[used];
+
+		for (s32 l = 0; l<len+1; ++l)
+			array[l] = (T)c[l];
+
+		delete [] oldArray;
+		return *this;
+	}
+
+	//! Add operator for other strings
+	string<T> operator+(const string<T>& other) 
+	{ 
+		string<T> str(*this); 
+		str.append(other); 
+
+		return str; 
+	} 
+
+	//! Add operator for strings, ascii and unicode 
+	template <class B> 
+	string<T> operator+(const B* c) 
+	{ 
+		string<T> str(*this); 
+		str.append(c); 
+
+		return str; 
+	}
+
+
+
+	//! Direct access operator
+	T& operator [](const s32 index)  const
+	{
+		_IRR_DEBUG_BREAK_IF(index>=used) // bad index
+
+		return array[index];
+	}
+
+
+	//! Comparison operator
+	bool operator ==(const T* str) const
+	{
+		int i;
+		for(i=0; array[i] && str[i]; ++i)
+			if (array[i] != str[i])
+				return false;
+
+		return !array[i] && !str[i];
+	}
+
+
+
+	//! Comparison operator
+	bool operator ==(const string<T>& other) const
+	{
+		for(s32 i=0; array[i] && other.array[i]; ++i)
+			if (array[i] != other.array[i])
+				return false;
+
+		return used == other.used;
+	}
+
+
+
+	//! Is smaller operator
+	bool operator <(const string<T>& other) const
+	{
+		for(s32 i=0; array[i] && other.array[i]; ++i)
+			if (array[i] != other.array[i])
+				return (array[i] < other.array[i]);
+
+		return used < other.used;
+	}
+
+
+
+	//! Equals not operator
+	bool operator !=(const string<T>& other) const
+	{
+		return !(*this == other);
+	}
+
+
+    
+	//! Returns length of string
+	/** \return Returns length of the string in characters. */
+	s32 size() const
+	{
+		return used-1;
+	}
+
+
+
+	//! Returns character string
+	/** \return Returns pointer to C-style zero terminated string. */
+	const T* c_str() const
+	{
+		return array;
+	}
+
+
+
+	//! Makes the string lower case.
+	void make_lower()
+	{
+		const T A = (T)'A';
+		const T Z = (T)'Z';
+		const T diff = (T)'a' - A;
+
+		for (s32 i=0; i<used; ++i)
+		{
+			if (array[i]>=A && array[i]<=Z)
+				array[i] += diff;
+		}
+	}
+
+
+
+	//! Makes the string upper case.
+	void make_upper()
+	{
+		const T a = (T)'a';
+		const T z = (T)'z';
+		const T diff = (T)'A' - a;
+
+		for (s32 i=0; i<used; ++i)
+		{
+			if (array[i]>=a && array[i]<=z)
+				array[i] += diff;
+		}
+	}
+
+
+
+	//! Compares the string ignoring case.
+	/** \param other: Other string to compare.
+	\return Returns true if the string are equal ignoring case. */
+	bool equals_ignore_case(const string<T>& other) const
+	{
+		for(s32 i=0; array[i] && other[i]; ++i)
+			if (toLower(array[i]) != toLower(other[i]))
+				return false;
+
+		return used == other.used;
+	}
+
+
+	//! compares the first n characters of the strings
+	bool equalsn(const string<T>& other, int len)
+	{
+		int i;
+		for(i=0; array[i] && other[i] && i < len; ++i)
+			if (array[i] != other[i])
+				return false;
+
+		// if one (or both) of the strings was smaller then they
+		// are only equal if they have the same lenght
+		return (i == len) || (used == other.used);
+	}
+
+
+	//! compares the first n characters of the strings
+	bool equalsn(const T* str, int len)
+	{
+		int i;	
+		for(i=0; array[i] && str[i] && i < len; ++i)
+			if (array[i] != str[i])
+				return false;
+
+		// if one (or both) of the strings was smaller then they
+		// are only equal if they have the same lenght
+		return (i == len) || (array[i] == 0 && str[i] == 0);
+	}
+
+
+	//! Appends a character to this string
+	/** \param character: Character to append. */
+	void append(T character)
+	{
+		if (used + 1 > allocated)
+			reallocate((s32)used + 1);
+
+		used += 1;
+
+		array[used-2] = character;
+		array[used-1] = 0;
+	}
+
+	//! Appends a string to this string
+	/** \param other: String to append. */
+	void append(const string<T>& other)
+	{
+		--used;
+
+		s32 len = other.size();
+		
+		if (used + len + 1 > allocated)
+			reallocate((s32)used + (s32)len + 1);
+
+		for (s32 l=0; l<len+1; ++l)
+			array[l+used] = other[l];
+
+		used = used + len + 1;
+	}
+
+
+	//! Appends a string of the length l to this string.
+	/** \param other: other String to append to this string.
+	 \param length: How much characters of the other string to add to this one. */
+	void append(const string<T>& other, s32 length)
+	{
+		s32 len = other.size();
+
+		if (len < length)
+		{
+			append(other);
+			return;
+		}
+
+		len = length;
+		--used;
+		
+		if (used + len > allocated)
+			reallocate((s32)used + (s32)len);
+
+		for (s32 l=0; l<len; ++l)
+			array[l+used] = other[l];
+
+		used = used + len;
+	}
+
+
+	//! Reserves some memory.
+	/** \param count: Amount of characters to reserve. */
+	void reserve(s32 count)
+	{
+		if (count < allocated)
+			return;
+
+		reallocate(count);
+	}
+
+
+	//! finds first occurrence of character in string
+	/** \param c: Character to search for.
+	\return Returns position where the character has been found,
+	or -1 if not found. */
+	s32 findFirst(T c) const
+	{
+		for (s32 i=0; i<used; ++i)
+			if (array[i] == c)
+				return i;
+
+		return -1;
+	}
+
+	//! finds first occurrence of a character of a list in string
+	/** \param c: List of strings to find. For example if the method
+	should find the first occurance of 'a' or 'b', this parameter should be "ab".
+	\param count: Amount of characters in the list. Ususally, 
+	this should be strlen(ofParameter1)
+	\return Returns position where one of the character has been found,
+	or -1 if not found. */
+	s32 findFirstChar(T* c, int count) const
+	{
+		for (s32 i=0; i<used; ++i)
+			for (int j=0; j<count; ++j)
+				if (array[i] == c[j])
+					return i;
+
+		return -1;
+	}
+
+
+	//! Finds first position of a character not in a given list.
+	/** \param c: List of characters not to find. For example if the method
+	 should find the first occurance of a character not 'a' or 'b', this parameter should be "ab".
+	\param count: Amount of characters in the list. Ususally, 
+	this should be strlen(ofParameter1)
+	\return Returns position where the character has been found,
+	or -1 if not found. */
+	template <class B> 
+	s32 findFirstCharNotInList(B* c, int count) const
+	{
+		for (int i=0; i<used; ++i)
+		{
+            int j;
+			for (j=0; j<count; ++j)
+				if (array[i] == c[j])
+					break;
+
+			if (j==count)
+				return i;
+		}
+
+		return -1;
+	}
+
+	//! Finds last position of a character not in a given list.
+	/** \param c: List of characters not to find. For example if the method
+	 should find the first occurance of a character not 'a' or 'b', this parameter should be "ab".
+	\param count: Amount of characters in the list. Ususally, 
+	this should be strlen(ofParameter1)
+	\return Returns position where the character has been found,
+	or -1 if not found. */
+	template <class B> 
+	s32 findLastCharNotInList(B* c, int count) const
+	{
+		for (int i=used-2; i>=0; --i)
+		{
+            int j;
+			for (j=0; j<count; ++j)
+				if (array[i] == c[j])
+					break;
+
+			if (j==count)
+				return i;
+		}
+
+		return -1;
+	}
+
+	//! finds next occurrence of character in string
+	/** \param c: Character to search for.
+	\param startPos: Position in string to start searching. 
+	\return Returns position where the character has been found,
+	or -1 if not found. */
+	s32 findNext(T c, s32 startPos) const
+	{
+		for (s32 i=startPos; i<used; ++i)
+			if (array[i] == c)
+				return i;
+
+		return -1;
+	}
+
+
+	//! finds last occurrence of character in string
+	//! \param c: Character to search for.
+	//! \return Returns position where the character has been found,
+	//! or -1 if not found.
+	s32 findLast(T c) const
+	{
+		for (s32 i=used-1; i>=0; --i)
+			if (array[i] == c)
+				return i;
+
+		return -1;
+	}
+
+
+	//! Returns a substring
+	//! \param begin: Start of substring.
+	//! \param length: Length of substring.
+	string<T> subString(s32 begin, s32 length)
+	{
+		if (length <= 0)
+			return string<T>("");
+
+		string<T> o;
+		o.reserve(length+1);
+
+		for (s32 i=0; i<length; ++i)
+			o.array[i] = array[i+begin];
+
+		o.array[length] = 0;
+		o.used = o.allocated;
+
+		return o;
+	}
+
+
+	void operator += (T c)
+	{
+		append(c);
+	}
+
+	void operator += (const string<T>& other)
+	{
+		append(other);
+	}
+
+	void operator += (int i)
+	{
+		append(string<T>(i));
+	}
+
+	//! replaces all characters of a special type with another one
+	void replace(T toReplace, T replaceWith)
+	{
+		for (s32 i=0; i<used; ++i)
+			if (array[i] == toReplace)
+				array[i] = replaceWith;
+	}
+
+	//! trims the string.
+	/** Removes whitespace from begin and end of the string. */
+	void trim()
+	{
+		const char whitespace[] = " \t\n";
+		const int whitespacecount = 3;
+
+		// find start and end of real string without whitespace
+		int begin = findFirstCharNotInList(whitespace, whitespacecount);
+		if (begin == -1)
+			return;
+
+		int end = findLastCharNotInList(whitespace, whitespacecount);
+		if (end == -1)
+			return;
+
+		*this = subString(begin, (end +1) - begin);
+	}
+
+
+	//! Erases a character from the string. May be slow, because all elements 
+	//! following after the erased element have to be copied.
+	//! \param index: Index of element to be erased.
+	void erase(int index)
+	{
+		_IRR_DEBUG_BREAK_IF(index>=used || index<0) // access violation
+
+		for (int i=index+1; i<used; ++i)
+			array[i-1] = array[i];
+
+		--used;
+	}
+
+    	
+
+private:
+
+	//! Returns a character converted to lower case
+	T toLower(const T& t) const
+	{
+		if (t>=(T)'A' && t<=(T)'Z')
+			return t + ((T)'a' - (T)'A');
+		else
+			return t;
+	}
+
+	//! Reallocate the array, make it bigger or smaler
+	void reallocate(s32 new_size)
+	{
+		T* old_array = array;
+
+		array = new T[new_size];
+		allocated = new_size;
+		
+		s32 amount = used < new_size ? used : new_size;
+		for (s32 i=0; i<amount; ++i)
+			array[i] = old_array[i];
+
+		if (allocated < used)
+			used = allocated;
+		
+		delete [] old_array;
+	}
+
+
+	//--- member variables
+
+	T* array;
+	s32 allocated;
+	s32 used;
+};
+
+
+//! Typedef for character strings
+typedef string<irr::c8> stringc;
+
+//! Typedef for wide character strings
+typedef string<wchar_t> stringw;
+
+} // end namespace core
+} // end namespace irr
+
+#endif
+

libraries/irrxml/include/irrTypes.h

+// Copyright (C) 2002-2005 Nikolaus Gebhardt
+// This file is part of the "Irrlicht Engine".
+// For conditions of distribution and use, see copyright notice in irrlicht.h
+
+#ifndef __IRR_TYPES_H_INCLUDED__
+#define __IRR_TYPES_H_INCLUDED__
+
+namespace irr
+{
+
+//! 8 bit unsigned variable.
+/** This is a typedef for unsigned char, it ensures portability of the engine. */
+typedef unsigned char		u8; 
+
+//! 8 bit signed variable.
+/** This is a typedef for signed char, it ensures portability of the engine. */
+typedef signed char			s8; 
+
+//! 8 bit character variable.
+/** This is a typedef for char, it ensures portability of the engine. */
+typedef char				c8; 
+
+
+
+//! 16 bit unsigned variable.
+/** This is a typedef for unsigned short, it ensures portability of the engine. */
+typedef unsigned short		u16;
+
+//! 16 bit signed variable.
+/** This is a typedef for signed short, it ensures portability of the engine. */
+typedef signed short		s16; 
+
+
+
+//! 32 bit unsigned variable.
+/** This is a typedef for unsigned int, it ensures portability of the engine. */
+typedef unsigned int		u32;
+
+//! 32 bit signed variable.
+/** This is a typedef for signed int, it ensures portability of the engine. */
+typedef signed int			s32; 
+
+
+
+// 64 bit signed variable.
+// This is a typedef for __int64, it ensures portability of the engine. 
+// This type is currently not used by the engine and not supported by compilers
+// other than Microsoft Compilers, so it is outcommented.
+//typedef __int64				s64; 
+
+
+
+//! 32 bit floating point variable.
+/** This is a typedef for float, it ensures portability of the engine. */
+typedef float				f32; 
+
+//! 64 bit floating point variable.
+/** This is a typedef for double, it ensures portability of the engine. */
+typedef double				f64; 
+
+
+} // end namespace
+
+
+// define the wchar_t type if not already built in.
+#ifdef _MSC_VER 
+#ifndef _WCHAR_T_DEFINED
+//! A 16 bit wide character type.
+/**
+	Defines the wchar_t-type.
+	In VS6, its not possible to tell
+	the standard compiler to treat wchar_t as a built-in type, and 
+	sometimes we just don't want to include the huge stdlib.h or wchar.h,
+	so we'll use this.
+*/
+typedef unsigned short wchar_t;
+#define _WCHAR_T_DEFINED
+#endif // wchar is not defined
+#endif // microsoft compiler
+
+//! define a break macro for debugging only in Win32 mode.
+#if defined(WIN32) && defined(_MSC_VER) && defined(_DEBUG)
+#define _IRR_DEBUG_BREAK_IF( _CONDITION_ ) if (_CONDITION_) {_asm int 3}
+#else 
+#define _IRR_DEBUG_BREAK_IF( _CONDITION_ )
+#endif
+
+//! Defines a small statement to work around a microsoft compiler bug.
+/** The microsft compiler 7.0 - 7.1 has a bug:
+When you call unmanaged code that returns a bool type value of false from managed code, 
+the return value may appear as true. See 
+http://support.microsoft.com/default.aspx?kbid=823071 for details. 
+Compiler version defines: VC6.0 : 1200, VC7.0 : 1300, VC7.1 : 1310, VC8.0 : 1400*/
+#if defined(WIN32) && defined(_MSC_VER) && (_MSC_VER > 1299) && (_MSC_VER < 1400)
+#define _IRR_IMPLEMENT_MANAGED_MARSHALLING_BUGFIX __asm mov eax,100
+#else
+#define _IRR_IMPLEMENT_MANAGED_MARSHALLING_BUGFIX
+#endif // _IRR_MANAGED_MARSHALLING_BUGFIX
+
+#endif // __IRR_TYPES_H_INCLUDED__
+

libraries/irrxml/include/irrXML.h

+// Copyright (C) 2002-2005 Nikolaus Gebhardt
+// This file is part of the "Irrlicht Engine" and the "irrXML" project.
+// For conditions of distribution and use, see copyright notice in irrlicht.h and/or irrXML.h
+
+#ifndef __IRR_XML_H_INCLUDED__
+#define __IRR_XML_H_INCLUDED__
+
+#include <stdio.h>
+
+/** \mainpage irrXML 1.2 API documentation
+ <div align="center"><img src="logobig.png" ></div>
+
+ \section intro Introduction
+
+  Welcome to the irrXML API documentation.
+  Here you'll find any information you'll need to develop applications with
+  irrXML. If you look for a tutorial on how to start, take a look at the \ref irrxmlexample,
+  at the homepage of irrXML at <A HREF="http://xml.irrlicht3d.org" >xml.irrlicht3d.org</A> 
+  or into the SDK in the directory \example.
+ 
+  irrXML is intended to be a high speed and easy-to-use XML Parser for C++, and
+  this documentation is an important part of it. If you have any questions or
+  suggestions, just send a email to the author of the engine, Nikolaus Gebhardt
+  (niko (at) irrlicht3d.org). For more informations about this parser, see \ref history.
+
+  \section features Features
+
+  irrXML provides forward-only, read-only 
+     access to a stream of non validated XML data. It was fully implemented by
+	 Nikolaus Gebhardt. Its current features are:
+
+	 - It it fast as lighting and has very low memory usage. It was 
+	   developed with the intention of being used in 3D games, as it already has been.
+	 - irrXML is very small: It only consists of 60 KB of code and can be added easily
+	   to your existing project.
+	 - Of course, it is platform independent and works with lots of compilers.
+	 - It is able to parse ASCII, UTF-8, UTF-16 and UTF-32 text files, both in 
+	   little and big endian format. 
+	 - Independent of the input file format, the parser can return all strings in ASCII, UTF-8,
+	   UTF-16 and UTF-32 format. 
+	 - With its optional file access abstraction it has the advantage that it can read not
+	   only from files but from any type of data (memory, network, ...). For example when 
+	   used with the Irrlicht Engine, it directly reads from compressed .zip files. 
+	 - Just like the Irrlicht Engine for which it was originally created, it is extremely easy 
+	   to use.
+	 - It has no external dependencies, it does not even need the STL. 
+
+	 Although irrXML has some strenghts, it currently also has the following limitations:
+
+	 - The input xml file is not validated and assumed to be correct. 
+
+    \section irrxmlexample Example
+
+    The following code demonstrates the basic usage of irrXML. A simple xml
+	file like this is parsed:
+    \code
+	<?xml version="1.0"?>
+	<config>
+		<!-- This is a config file for the mesh viewer -->
+		<model file="dwarf.dea" />
+		<messageText caption="Irrlicht Engine Mesh Viewer">
+		Welcome to the Mesh Viewer of the &quot;Irrlicht Engine&quot;.
+		</messageText>
+	</config>
+	\endcode
+
+	The code for parsing this file would look like this:
+	\code
+	#include <irrXML.h>
+	using namespace irr; // irrXML is located in the namespace irr::io
+	using namespace io;
+
+	#include <string> // we use STL strings to store data in this example
+
+	void main()
+	{
+		// create the reader using one of the factory functions
+
+		IrrXMLReader* xml = createIrrXMLReader("config.xml");
+
+		// strings for storing the data we want to get out of the file
+		std::string modelFile;
+		std::string messageText;
+		std::string caption;
+
+		// parse the file until end reached
+
+		while(xml && xml->read())
+		{
+			switch(xml->getNodeType())
+			{
+			case EXN_TEXT:
+				// in this xml file, the only text which occurs is the messageText
+				messageText = xml->getNodeData();
+				break;
+			case EXN_ELEMENT:
+				{
+					if (!strcmp("model", xml->getNodeName()))
+						modelFile = xml->getAttributeValue("file");
+					else
+					if (!strcmp("messageText", xml->getNodeName()))
+						caption = xml->getAttributeValue("caption");
+				}
+				break;
+			}
+		}
+
+		// delete the xml parser after usage
+		delete xml;
+	}
+	\endcode
+
+	\section howto How to use
+
+	Simply add the source files in the /src directory of irrXML to your project. Done.
+
+	\section license License
+
+	The irrXML license is based on the zlib license. Basicly, this means you can do with
+	irrXML whatever you want:
+
+	Copyright (C) 2002-2005 Nikolaus Gebhardt
+
+	This software is provided 'as-is', without any express or implied
+	warranty.  In no event will the authors be held liable for any damages
+	arising from the use of this software.
+
+	Permission is granted to anyone to use this software for any purpose,
+	including commercial applications, and to alter it and redistribute it
+	freely, subject to the following restrictions:
+
+	1. The origin of this software must not be misrepresented; you must not
+		claim that you wrote the original software. If you use this software
+		in a product, an acknowledgment in the product documentation would be
+		appreciated but is not required.
+
+	2. Altered source versions must be plainly marked as such, and must not be
+		misrepresented as being the original software.
+
+	3. This notice may not be removed or altered from any source distribution.
+
+	\section history History
+
+	As lots of references in this documentation and the source show, this xml 
+	parser has originally been a part of the 
+	<A HREF="http://irrlicht.sourceforge.net" >Irrlicht Engine</A>. But because
+	the parser has become very useful with the latest release, people asked for a 
+	separate version of it, to be able to use it in non Irrlicht projects. With
+	irrXML 1.0, this has now been done.
+*/
+
+namespace irr
+{
+namespace io
+{
+	//! Enumeration of all supported source text file formats 
+	enum ETEXT_FORMAT
+	{
+		//! ASCII, file without byte order mark, or not a text file
+		ETF_ASCII,
+
+		//! UTF-8 format
+		ETF_UTF8,
+
+		//! UTF-16 format, big endian
+		ETF_UTF16_BE,
+
+		//! UTF-16 format, little endian
+		ETF_UTF16_LE,
+
+		//! UTF-32 format, big endian
+		ETF_UTF32_BE,
+
+		//! UTF-32 format, little endian
+		ETF_UTF32_LE,
+	};
+
+
+	//! Enumeration for all xml nodes which are parsed by IrrXMLReader
+	enum EXML_NODE
+	{
+		//! No xml node. This is usually the node if you did not read anything yet.
+		EXN_NONE,
+
+		//! A xml element, like <foo>
+		EXN_ELEMENT,
+
+		//! End of an xml element, like </foo>
+		EXN_ELEMENT_END,
+
+		//! Text within a xml element: <foo> this is the text. </foo>
+		EXN_TEXT,
+
+		//! An xml comment like &lt;!-- I am a comment --&gt; or a DTD definition.
+		EXN_COMMENT,
+
+		//! An xml cdata section like &lt;![CDATA[ this is some CDATA ]]&gt;
+		EXN_CDATA,
+
+		//! Unknown element.
+		EXN_UNKNOWN
+	};
+
+	//! Callback class for file read abstraction. 
+	/** With this, it is possible to make the xml parser read in other things 
+	than just files. The Irrlicht engine is using this for example to 
+	read xml from compressed .zip files. To make the parser read in 
+	any other data, derive a class from this interface, implement the 
+	two methods to read your data and give a pointer to an instance of
+	your implementation when calling createIrrXMLReader(), 
+	createIrrXMLReaderUTF16() or createIrrXMLReaderUTF32() */
+	class IFileReadCallBack
+	{
+	public:
+
+		//! virtual destructor
+		virtual ~IFileReadCallBack() {};
+
+		//! Reads an amount of bytes from the file.
+		/** \param buffer: Pointer to buffer where to read bytes will be written to.
+		\param sizeToRead: Amount of bytes to read from the file.
+		\return Returns how much bytes were read. */
+		virtual int read(void* buffer, int sizeToRead) = 0;
+
+		//! Returns size of file in bytes
+		virtual int getSize() = 0;
+	};
+
+	//! Empty class to be used as parent class for IrrXMLReader.
+	/** If you need another class as base class for the xml reader, you can do this by creating
+	the reader using for example new CXMLReaderImpl<char, YourBaseClass>(yourcallback);
+	The Irrlicht Engine for example needs IUnknown as base class for every object to
+	let it automaticly reference countend, hence it replaces IXMLBase with IUnknown.
+	See irrXML.cpp on how this can be done in detail. */
+	class IXMLBase
+	{
+	};	
+
+	//! Interface providing easy read access to a XML file.
+	/** You can create an instance of this reader using one of the factory functions
+	createIrrXMLReader(), createIrrXMLReaderUTF16() and createIrrXMLReaderUTF32().
+	If using the parser from the Irrlicht Engine, please use IFileSystem::createXMLReader() 
+	instead.
+	For a detailed intro how to use the parser, see \ref irrxmlexample and \ref features.
+
+	The typical usage of this parser looks like this:
+	\code
+	#include <irrXML.h>
+	using namespace irr; // irrXML is located in the namespace irr::io
+	using namespace io;
+
+	void main()
+	{
+		// create the reader using one of the factory functions
+		IrrXMLReader* xml = createIrrXMLReader("config.xml");
+
+		if (xml == 0)
+			return; // file could not be opened
+
+		// parse the file until end reached
+		while(xml->read())
+		{
+			// based on xml->getNodeType(), do something.
+		}
+
+		// delete the xml parser after usage
+		delete xml;
+	}
+	\endcode
+	See \ref irrxmlexample for a more detailed example.
+	*/
+	template<class char_type, class super_class>
+	class IIrrXMLReader : public super_class
+	{
+	public:
+
+		//! Destructor
+		virtual ~IIrrXMLReader() {};
+
+		//! Reads forward to the next xml node. 
+		/** \return Returns false, if there was no further node.  */
+		virtual bool read() = 0;
+
+		//! Returns the type of the current XML node.
+		virtual EXML_NODE getNodeType() const = 0;
+
+        //! Returns attribute count of the current XML node. 
+		/** This is usually
+		non null if the current node is EXN_ELEMENT, and the element has attributes.
+		\return Returns amount of attributes of this xml node. */
+		virtual int getAttributeCount() const = 0;
+
+		//! Returns name of an attribute. 
+		/** \param idx: Zero based index, should be something between 0 and getAttributeCount()-1.
+		\return Name of the attribute, 0 if an attribute with this index does not exist. */
+		virtual const char_type* getAttributeName(int idx) const = 0;
+
+		//! Returns the value of an attribute. 
+		/** \param idx: Zero based index, should be something between 0 and getAttributeCount()-1.
+		\return Value of the attribute, 0 if an attribute with this index does not exist. */
+		virtual const char_type* getAttributeValue(int idx) const = 0;
+
+		//! Returns the value of an attribute. 
+		/** \param name: Name of the attribute.
+		\return Value of the attribute, 0 if an attribute with this name does not exist. */
+		virtual const char_type* getAttributeValue(const char_type* name) const = 0;
+
+		//! Returns the value of an attribute in a safe way.
+		/** Like getAttributeValue(), but does not 
+		return 0 if the attribute does not exist. An empty string ("") is returned then.
+		\param name: Name of the attribute.
+		\return Value of the attribute, and "" if an attribute with this name does not exist */
+		virtual const char_type* getAttributeValueSafe(const char_type* name) const = 0;
+
+		//! Returns the value of an attribute as integer. 
+		/** \param name Name of the attribute.
+		\return Value of the attribute as integer, and 0 if an attribute with this name does not exist or
+		the value could not be interpreted as integer. */
+		virtual int getAttributeValueAsInt(const char_type* name) const = 0;
+
+		//! Returns the value of an attribute as integer. 
+		/** \param idx: Zero based index, should be something between 0 and getAttributeCount()-1.
+		\return Value of the attribute as integer, and 0 if an attribute with this index does not exist or
+		the value could not be interpreted as integer. */
+		virtual int getAttributeValueAsInt(int idx) const = 0;
+
+		//! Returns the value of an attribute as float. 
+		/** \param name: Name of the attribute.
+		\return Value of the attribute as float, and 0 if an attribute with this name does not exist or
+		the value could not be interpreted as float. */
+		virtual float getAttributeValueAsFloat(const char_type* name) const = 0;
+
+		//! Returns the value of an attribute as float. 
+		/** \param idx: Zero based index, should be something between 0 and getAttributeCount()-1.
+		\return Value of the attribute as float, and 0 if an attribute with this index does not exist or
+		the value could not be interpreted as float. */
+		virtual float getAttributeValueAsFloat(int idx) const = 0;
+
+		//! Returns the name of the current node. 
+		/** Only non null, if the node type is EXN_ELEMENT.
+		\return Name of the current node or 0 if the node has no name. */
+		virtual const char_type* getNodeName() const = 0;
+
+		//! Returns data of the current node. 
+		/** Only non null if the node has some
+		data and it is of type EXN_TEXT or EXN_UNKNOWN. */
+		virtual const char_type* getNodeData() const = 0;
+
+		//! Returns if an element is an empty element, like <foo />
+		virtual bool isEmptyElement() const = 0;
+
+		//! Returns format of the source xml file. 
+		/** It is not necessary to use
+		this method because the parser will convert the input file format
+		to the format wanted by the user when creating the parser. This
+		method is useful to get/display additional informations. */
+		virtual ETEXT_FORMAT getSourceFormat() const = 0;
+
+		//! Returns format of the strings returned by the parser. 
+		/** This will be UTF8 for example when you created a parser with
+		IrrXMLReaderUTF8() and UTF32 when it has been created using 
+		IrrXMLReaderUTF32. It should not be necessary to call this
+		method and only exists for informational purposes. */
+		virtual ETEXT_FORMAT getParserFormat() const = 0;
+	};
+
+
+	//! defines the utf-16 type.
+	/** Not using wchar_t for this because 
+	wchar_t has 16 bit on windows and 32 bit on other operating systems. */
+	typedef unsigned short char16;
+
+	//! defines the utf-32 type. 
+	/** Not using wchar_t for this because 
+	wchar_t has 16 bit on windows and 32 bit on other operating systems. */
+	typedef unsigned long char32;
+
+	//! A UTF-8 or ASCII character xml parser.
+	/** This means that all character data will be returned in 8 bit ASCII or UTF-8 by this parser. 
+	The file to read can be in any format, it will be converted to UTF-8 if it is not
+	in this format.
+	Create an instance of this with createIrrXMLReader(); 
+	See IIrrXMLReader for description on how to use it. */
+	typedef IIrrXMLReader<char, IXMLBase> IrrXMLReader;
+
+	//! A UTF-16 xml parser. 
+	/** This means that all character data will be returned in UTF-16 by this parser. 
+	The file to read can be in any format, it will be converted to UTF-16 if it is not
+	in this format.
+	Create an instance of this with createIrrXMLReaderUTF16(); 
+	See IIrrXMLReader for description on how to use it.  */
+	typedef IIrrXMLReader<char16, IXMLBase> IrrXMLReaderUTF16;
+
+	//! A UTF-32 xml parser. 
+	/** This means that all character data will be returned in UTF-32 by this parser. 
+	The file to read can be in any format, it will be converted to UTF-32 if it is not
+	in this format.
+	Create an instance of this with createIrrXMLReaderUTF32(); 
+	See IIrrXMLReader for description on how to use it. */
+	typedef IIrrXMLReader<char32, IXMLBase> IrrXMLReaderUTF32;
+
+
+	//! Creates an instance of an UFT-8 or ASCII character xml parser.
+	/** This means that all character data will be returned in 8 bit ASCII or UTF-8. 
+	The file to read can be in any format, it will be converted to UTF-8 if it is not in this format.
+	If you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReaderUTF8() instead.
+	\param filename: Name of file to be opened.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReader* createIrrXMLReader(const char* filename);
+
+	//! Creates an instance of an UFT-8 or ASCII character xml parser.
+	/** This means that all character data will be returned in 8 bit ASCII or UTF-8. The file to read can 
+	be in any format, it will be converted to UTF-8 if it is not in this format.
+	If you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReaderUTF8() instead.
+	\param file: Pointer to opened file, must have been opened in binary mode, e.g.
+	using fopen("foo.bar", "wb"); The file will not be closed after it has been read.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReader* createIrrXMLReader(FILE* file);
+
+	//! Creates an instance of an UFT-8 or ASCII character xml parser. 
+	/** This means that all character data will be returned in 8 bit ASCII or UTF-8. The file to read can 
+	 be in any format, it will be converted to UTF-8 if it is not in this format.
+	 If you are using the Irrlicht Engine, it is better not to use this function but
+	 IFileSystem::createXMLReaderUTF8() instead.
+	 \param callback: Callback for file read abstraction. Implement your own
+	 callback to make the xml parser read in other things than just files. See
+	 IFileReadCallBack for more information about this.
+	 \return Returns a pointer to the created xml parser. This pointer should be 
+	 deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	 and the file could not be opened. */
+	IrrXMLReader* createIrrXMLReader(IFileReadCallBack* callback);
+
+	//! Creates an instance of an UFT-16 xml parser. 
+	/** This means that
+	all character data will be returned in UTF-16. The file to read can 
+	be in any format, it will be converted to UTF-16 if it is not in this format.
+	If you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReader() instead.
+	\param filename: Name of file to be opened.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReaderUTF16* createIrrXMLReaderUTF16(const char* filename);
+
+	//! Creates an instance of an UFT-16 xml parser. 
+	/** This means that all character data will be returned in UTF-16. The file to read can 
+	be in any format, it will be converted to UTF-16 if it is not in this format.
+	If you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReader() instead.
+	\param file: Pointer to opened file, must have been opened in binary mode, e.g.
+	using fopen("foo.bar", "wb"); The file will not be closed after it has been read.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReaderUTF16* createIrrXMLReaderUTF16(FILE* file);
+
+	//! Creates an instance of an UFT-16 xml parser. 
+	/** This means that all character data will be returned in UTF-16. The file to read can 
+	be in any format, it will be converted to UTF-16 if it is not in this format.
+	If you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReader() instead.
+	\param callback: Callback for file read abstraction. Implement your own
+	callback to make the xml parser read in other things than just files. See
+	IFileReadCallBack for more information about this.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReaderUTF16* createIrrXMLReaderUTF16(IFileReadCallBack* callback);
+
+
+	//! Creates an instance of an UFT-32 xml parser. 
+	/** This means that all character data will be returned in UTF-32. The file to read can 
+	be in any format, it will be converted to UTF-32 if it is not in this format.
+	If you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReader() instead.
+	\param filename: Name of file to be opened.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReaderUTF32* createIrrXMLReaderUTF32(const char* filename);
+
+	//! Creates an instance of an UFT-32 xml parser. 
+	/** This means that all character data will be returned in UTF-32. The file to read can 
+	be in any format, it will be converted to UTF-32 if it is not in this format.
+	if you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReader() instead.
+	\param file: Pointer to opened file, must have been opened in binary mode, e.g.
+	using fopen("foo.bar", "wb"); The file will not be closed after it has been read.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReaderUTF32* createIrrXMLReaderUTF32(FILE* file);
+
+	//! Creates an instance of an UFT-32 xml parser. 
+	/** This means that
+	all character data will be returned in UTF-32. The file to read can 
+	be in any format, it will be converted to UTF-32 if it is not in this format.
+	If you are using the Irrlicht Engine, it is better not to use this function but
+	IFileSystem::createXMLReader() instead.
+	\param callback: Callback for file read abstraction. Implement your own
+	callback to make the xml parser read in other things than just files. See
+	IFileReadCallBack for more information about this.
+	\return Returns a pointer to the created xml parser. This pointer should be 
+	deleted using 'delete' after no longer needed. Returns 0 if an error occured
+	and the file could not be opened. */
+	IrrXMLReaderUTF32* createIrrXMLReaderUTF32(IFileReadCallBack* callback);
+	
+
+	/*! \file irrxml.h
+    \brief Header file of the irrXML, the Irrlicht XML parser.
+    
+    This file includes everything needed for using irrXML, 
+    the XML parser of the Irrlicht Engine. To use irrXML,
+	you only need to include this file in your project:
+
+	\code
+	#include <irrXML.h>
+	\endcode
+
+	It is also common to use the two namespaces in which irrXML is included, 
+	directly after #including irrXML.h:
+
+	\code
+	#include <irrXML.h>
+	using namespace irr;
+	using namespace io;
+	\endcode
+	*/
+
+} // end namespace io
+} // end namespace irr
+
+#endif // __IRR_XML_H_INCLUDED__
+