<!--Copyright 2023 The HuggingFace Team. All rights reserved.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
-->

# LoRA Support in Diffusers 

Diffusers supports LoRA for faster fine-tuning of Stable Diffusion, allowing greater memory efficiency and easier portability. 

Low-Rank Adaption of Large Language Models was first introduced by Microsoft in
[LoRA: Low-Rank Adaptation of Large Language Models](https://arxiv.org/abs/2106.09685) by *Edward J. Hu, Yelong Shen, Phillip Wallis, Zeyuan Allen-Zhu, Yuanzhi Li, Shean Wang, Lu Wang, Weizhu Chen*.

In a nutshell, LoRA allows adapting pretrained models by adding pairs of rank-decomposition weight matrices (called **update matrices**) 
to existing weights and **only** training those newly added weights. This has a couple of advantages:

- Previous pretrained weights are kept frozen so that the model is not so prone to [catastrophic forgetting](https://www.pnas.org/doi/10.1073/pnas.1611835114). 
- Rank-decomposition matrices have significantly fewer parameters than the original model, which means that trained LoRA weights are easily portable.
- LoRA matrices are generally added to the attention layers of the original model and they control to which extent the model is adapted toward new training images via a `scale` parameter.

**__Note that the usage of LoRA is not just limited to attention layers. In the original LoRA work, the authors found out that just amending
the attention layers of a language model is sufficient to obtain good downstream performance with great efficiency. This is why, it's common
to just add the LoRA weights to the attention layers of a model.__**

[cloneofsimo](https://github.com/cloneofsimo) was the first to try out LoRA training for Stable Diffusion in the popular [lora](https://github.com/cloneofsimo/lora) GitHub repository.

<Tip>

LoRA allows us to achieve greater memory efficiency since the pretrained weights are kept frozen and only the LoRA weights are trained, thereby
allowing us to run fine-tuning on consumer GPUs like Tesla T4, RTX 3080 or even RTX 2080 Ti! One can get access to GPUs like T4 in the free 
tiers of Kaggle Kernels and Google Colab Notebooks.

</Tip>

## Getting started with LoRA for fine-tuning

Stable Diffusion can be fine-tuned in different ways:

* [Textual inversion](https://huggingface.co/docs/diffusers/main/en/training/text_inversion)
* [DreamBooth](https://huggingface.co/docs/diffusers/main/en/training/dreambooth) 
* [Text2Image fine-tuning](https://huggingface.co/docs/diffusers/main/en/training/text2image) 

We provide two end-to-end examples that show how to run fine-tuning with LoRA:

* [DreamBooth](https://github.com/huggingface/diffusers/tree/main/examples/dreambooth#training-with-low-rank-adaptation-of-large-language-models-lora) 
* [Text2Image](https://github.com/huggingface/diffusers/tree/main/examples/text_to_image#training-with-lora)

If you want to perform DreamBooth training with LoRA, for instance, you would run:

```bash
export MODEL_NAME="runwayml/stable-diffusion-v1-5"
export INSTANCE_DIR="path-to-instance-images"
export OUTPUT_DIR="path-to-save-model"

accelerate launch train_dreambooth_lora.py \
  --pretrained_model_name_or_path=$MODEL_NAME  \
  --instance_data_dir=$INSTANCE_DIR \
  --output_dir=$OUTPUT_DIR \
  --instance_prompt="a photo of sks dog" \
  --resolution=512 \
  --train_batch_size=1 \
  --gradient_accumulation_steps=1 \
  --checkpointing_steps=100 \
  --learning_rate=1e-4 \
  --report_to="wandb" \
  --lr_scheduler="constant" \
  --lr_warmup_steps=0 \
  --max_train_steps=500 \
  --validation_prompt="A photo of sks dog in a bucket" \
  --validation_epochs=50 \
  --seed="0" \
  --push_to_hub
```

A similar process can be followed to fully fine-tune Stable Diffusion on a custom dataset using the
`examples/text_to_image/train_text_to_image_lora.py` script.

Refer to the respective examples linked above to learn more. 

<Tip>

When using LoRA we can use a much higher learning rate (typically 1e-4 as opposed to ~1e-6) compared to non-LoRA Dreambooth fine-tuning.

</Tip>

But there is no free lunch. For the given dataset and expected generation quality, you'd still need to experiment with
different hyperparameters. Here are some important ones:

* Training time
    * Learning rate 
    * Number of training steps
* Inference time 
    * Number of steps 
    * Scheduler type

Additionally, you can follow [this blog](https://huggingface.co/blog/dreambooth) that documents some of our experimental
findings for performing DreamBooth training of Stable Diffusion.

When fine-tuning, the LoRA update matrices are only added to the attention layers. To enable this, we added new weight
loading functionalities. Their details are available [here](https://huggingface.co/docs/diffusers/main/en/api/loaders).

## Inference 

Assuming you used the `examples/text_to_image/train_text_to_image_lora.py` to fine-tune Stable Diffusion on the [Pokemon
dataset](https://huggingface.co/datasets/lambdalabs/pokemon-blip-captions), you can perform inference like so: 

```py 
from diffusers import StableDiffusionPipeline
import torch

model_path = "sayakpaul/sd-model-finetuned-lora-t4"
pipe = StableDiffusionPipeline.from_pretrained("CompVis/stable-diffusion-v1-4", torch_dtype=torch.float16)
pipe.unet.load_attn_procs(model_path)
pipe.to("cuda")

prompt = "A pokemon with blue eyes."
image = pipe(prompt, num_inference_steps=30, guidance_scale=7.5).images[0]
image.save("pokemon.png")
```

Here are some example images you can expect:

<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/pokemon-collage.png"/>

[`sayakpaul/sd-model-finetuned-lora-t4`](https://huggingface.co/sayakpaul/sd-model-finetuned-lora-t4) contains [LoRA fine-tuned update matrices](https://huggingface.co/sayakpaul/sd-model-finetuned-lora-t4/blob/main/pytorch_lora_weights.bin)
which is only 3 MBs in size. During inference, the pre-trained Stable Diffusion checkpoints are loaded alongside these update
matrices and then they are combined to run inference.

You can use the [`huggingface_hub`](https://github.com/huggingface/huggingface_hub) library to retrieve the base model
from [`sayakpaul/sd-model-finetuned-lora-t4`](https://huggingface.co/sayakpaul/sd-model-finetuned-lora-t4) like so:

```py
from huggingface_hub.repocard import RepoCard

card = RepoCard.load("sayakpaul/sd-model-finetuned-lora-t4")
base_model = card.data.to_dict()["base_model"]
# 'CompVis/stable-diffusion-v1-4'
```

And then you can use `pipe = StableDiffusionPipeline.from_pretrained(base_model, torch_dtype=torch.float16)`.

This is especially useful when you don't want to hardcode the base model identifier during initializing the `StableDiffusionPipeline`.

Inference for DreamBooth training remains the same. Check
[this section](https://github.com/huggingface/diffusers/tree/main/examples/dreambooth#inference-1) for more details. 

## Known limitations 

* Currently, we only support LoRA for the attention layers of [`UNet2DConditionModel`](https://huggingface.co/docs/diffusers/main/en/api/models#diffusers.UNet2DConditionModel).
