add steps for creating a Modelfile and more example commands to `import.md`

docs/import.md

+# Import a model
+
+This guide walks through creating an Ollama model from an existing model on HuggingFace from PyTorch, Safetensors or GGUF. It optionally covers pushing the model to [ollama.ai](https://ollama.ai/library).
+
+## Supported models
+
+Ollama supports a set of model architectures, with support for more coming soon:
+
+- Llama
+- Mistral
+- Falcon & RW
+- GPTNeoX
+- BigCode
+
+To view a model's architecture, check its `config.json` file. You should see an entry under `architecture` (e.g. `LlamaForCausalLM`).
+
+## Importing
+
+### Step 1: Clone the HuggingFace repository
+
+```
+git lfs install
+git clone https://huggingface.co/mistralai/Mistral-7B-Instruct-v0.1
+cd Mistral-7B-Instruct-v0.1
+```
+
+### Step 2: Convert and quantize
+
+- Install [Docker](https://www.docker.com/get-started/)
+
+Until Ollama supports conversion and quantization as a built-in feature, a [Docker image](https://hub.docker.com/r/ollama/quantize) with this tooling built-in is available.
+
+To convert and quantize your model, run:
+
+```
+docker run --rm -v .:/model ollama/quantize -q q4_0 /model
+```
+
+This will output two files into the directory:
+
+- `f16.bin`: the model converted to GGUF
+- `q4_0.bin` the model quantized to a 4-bit quantization
+
+### Step 3: Write a `Modelfile`
+
+Next, create a `Modelfile` for your model. This file is the blueprint for your model, specifying weights, parameters, prompt templates and more.
+
+```
+FROM ./q4_0.bin
+```
+
+(Optional) many chat models require a prompt template in order to answer correctly. A default prompt template can be specified with the `TEMPLATE` instruction in the `Modelfile`:
+
+```
+FROM ./q4_0.bin
+TEMPLATE "[INST] {{ .Prompt }} [/INST]"
+```
+
+### Step 4: Create an Ollama model
+
+Finally, create a model from your `Modelfile`:
+
+```
+ollama create example -f Modelfile
+```
+
+Next, test the model with `ollama run`:
+
+```
+ollama run example "What is your favourite condiment?"
+```
+
+### Step 5: Publish your model (optional - in alpha)
+
+Publishing models is in early alpha. If you'd like to publish your model to share with others, follow these steps:
+
+1. Create [an account](https://ollama.ai/signup)
+2. Ollama uses SSH keys similar to Git. Find your public key with `cat ~/.ollama/id_ed25519.pub` and copy it to your clipboard.
+3. Add your public key to your [Ollama account](https://ollama.ai/settings/keys)
+
+Next, copy your model to your username's namespace:
+
+```
+ollama cp example <your username>/example
+```
+
+Then push the model:
+
+```
+ollama push <your username>/example
+```
+
+After publishing, your model will be available at `https://ollama.ai/<your username>/example`
+
+## Quantization reference
+
+The quantization options are as follow (from highest highest to lowest levels of quantization). Note: some architectures such as Falcon do not support K quants.
+
+- `q2_K`
+- `q3_K`
+- `q3_K_S`
+- `q3_K_M`
+- `q3_K_L`
+- `q4_0` (recommended)
+- `q4_1`
+- `q4_K`
+- `q4_K_S`
+- `q4_K_M`
+- `q5_0`
+- `q5_1`
+- `q5_K`
+- `q5_K_S`
+- `q5_K_M`
+- `q6_K`
+- `q8_0`
+
+## Manually converting & quantizing models
+
+### Prerequisites
+
+Start by cloning the `llama.cpp` repo to your machine in another directory:
+
+```
+git clone https://github.com/ggerganov/llama.cpp.git
+cd llama.cpp
+```
+
+Next, install the Python dependencies:
+
+```
+pip install -r requirements.txt
+```
+
+Finally, build the `quantize` tool:
+
+```
+make quantize
+```
+
+### Convert the model
+
+Run the correct conversion script for your model architecture:
+
+```shell
+# LlamaForCausalLM or MistralForCausalLM
+python3 convert.py <path to model directory>
+
+# FalconForCausalLM
+python3 convert-falcon-hf-to-gguf.py <path to model directory>
+
+# GPTNeoXForCausalLM
+python3 convert-falcon-hf-to-gguf.py <path to model directory>
+
+# GPTBigCodeForCausalLM
+python3 convert-starcoder-hf-to-gguf.py <path to model directory>
+```
+
+### Quantize the model
+
+```
+quantize <path to model dir>/ggml-model-f32.bin <path to model dir>/q4_0.bin q4_0
+```

docs/quantize.md

-# How to Quantize a Model
-
-Sometimes the model you want to work with is not available at [https://ollama.ai/library](https://ollama.ai/library). If you want to try out that model before we have a chance to quantize it, you can use this process.
-
-## Figure out if we can run the model?
-
-Not all models will work with Ollama. There are a number of factors that go into whether we are able to work with the next cool model. First it has to work with llama.cpp. Then we have to have implemented the features of llama.cpp that it requires. And then, sometimes, even with both of those, the model might not work...
-
-1. What is the model you want to convert and upload?
-2. Visit the model's page on HuggingFace.
-3. Switch to the **Files and versions** tab.
-4. Click on the **config.json** file. If there is no config.json file, it may not work.
-5. Take note of the **architecture** list in the json file.
-6. Does any entry in the list match one of the following architectures?
-    1. LlamaForCausalLM
-    2. MistralForCausalLM
-    3. RWForCausalLM
-    4. FalconForCausalLM
-    5. GPTNeoXForCausalLM
-    6. GPTBigCodeForCausalLM
-7. If the answer is yes, then there is a good chance the model will run after being converted and quantized.
-8. An alternative to this process is to visit [https://caniquant.tvl.st](https://caniquant.tvl.st) and enter the org/modelname in the box and submit.
-
-At this point there are two processes you can use. You can either use a Docker container to convert and quantize, OR you can manually run the scripts. The Docker container is the easiest way to do it, but it requires you to have Docker installed on your machine. If you don't have Docker installed, you can follow the manual process.
-
-## Convert and Quantize with Docker
-
-Run `docker run --rm -v /path/to/model/repo:/repo ollama/quantize -q quantlevel /repo`. For instance, if you have downloaded the latest Mistral 7B model, then clone it to your machine. Then change into that directory and you can run:
-
-```shell
-docker run --rm -v .:/repo ollama/quantize -q q4_0 /repo
-```
-
-You can find the different quantization levels below under **Quantize the Model**.
-
-This will output two files into the directory. First is a f16.bin file that is the model converted to GGUF. The second file is a q4_0.bin file which is the model quantized to a 4 bit quantization. You should rename it to something more descriptive.
-
-You can find the repository for the Docker container here: [https://github.com/mxyng/quantize](https://github.com/mxyng/quantize)
-
-## Convert and Quantize Manually
-
-### Clone llama.cpp to your machine
-
-If we know the model has a chance of working, then we need to convert and quantize. This is a matter of running two separate scripts in the llama.cpp project.
-
-1. Decide where you want the llama.cpp repository on your machine.
-2. Navigate to that location and then run:
- [`git clone https://github.com/ggerganov/llama.cpp.git`](https://github.com/ggerganov/llama.cpp.git)
-    1. If you don't have git installed, download this zip file and unzip it to that location: https://github.com/ggerganov/llama.cpp/archive/refs/heads/master.zip
-3. Install the Python dependencies: `pip install torch transformers sentencepiece`
-
-### Convert the model to GGUF
-
-1. Decide on the right convert script to run. What was the model architecture you found in the first section.
-    1. LlamaForCausalLM or MistralForCausalLM:
-    run `python3 convert.py <modelfilename>`
-    No need to specify fp16 or fp32.
-    2. FalconForCausalLM or RWForCausalLM:
-    run `python3 convert-falcon-hf-to-gguf.py <modelfilename> <fpsize>`  
-    fpsize depends on the weight size. 1 for fp16, 0 for fp32
-    3. GPTNeoXForCausalLM:
-    run `python3 convert-gptneox-hf-to-gguf.py <modelfilename> <fpsize>`
-    fpsize depends on the weight size. 1 for fp16, 0 for fp32
-    4. GPTBigCodeForCausalLM:
-    run `python3 convert-starcoder-hf-to-gguf.py <modelfilename> <fpsize>`
-    fpsize depends on the weight size. 1 for fp16, 0 for fp32
-
-### Quantize the model
-
-If the model converted successfully, there is a good chance it will also quantize successfully. Now you need to decide on the quantization to use. We will always try to create all the quantizations and upload them to the library. You should decide which level is more important to you and quantize accordingly.
-
-The quantization options are as follows. Note that some architectures such as Falcon do not support K quants.
-
-- Q4_0
-- Q4_1
-- Q5_0
-- Q5_1
-- Q2_K
-- Q3_K
-- Q3_K_S
-- Q3_K_M
-- Q3_K_L
-- Q4_K
-- Q4_K_S
-- Q4_K_M
-- Q5_K
-- Q5_K_S
-- Q5_K_M
-- Q6_K
-- Q8_0
-
-Run the following command `quantize <converted model from above> <output file> <quantization type>`
-
-## Now Create the Model
-
-Now you can create the Ollama model. Refer to the [modelfile](./modelfile.md) doc for more information on doing that.