# Copyright 2021 The TensorFlow Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Tests for optimizer_factory.py."""
from absl.testing import parameterized
import numpy as np
import tensorflow as tf

from official.modeling.optimization import optimizer_factory
from official.modeling.optimization.configs import optimization_config


class OptimizerFactoryTest(tf.test.TestCase, parameterized.TestCase):

  @parameterized.parameters(('sgd'), ('rmsprop'), ('adam'), ('adamw'), ('lamb'),
                            ('lars'), ('adagrad'), ('adafactor'))
  def test_optimizers(self, optimizer_type):
    params = {
        'optimizer': {
            'type': optimizer_type
        },
        'learning_rate': {
            'type': 'constant',
            'constant': {
                'learning_rate': 0.1
            }
        }
    }
    optimizer_cls = optimizer_factory.OPTIMIZERS_CLS[optimizer_type]
    expected_optimizer_config = optimizer_cls().get_config()
    expected_optimizer_config['learning_rate'] = 0.1

    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()
    optimizer = opt_factory.build_optimizer(lr, postprocessor=lambda x: x)

    self.assertIsInstance(optimizer, optimizer_cls)
    self.assertEqual(expected_optimizer_config, optimizer.get_config())

  @parameterized.parameters((None, None), (1.0, None), (None, 1.0))
  def test_gradient_clipping(self, clipnorm, clipvalue):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'clipnorm': clipnorm,
                'clipvalue': clipvalue
            }
        },
        'learning_rate': {
            'type': 'constant',
            'constant': {
                'learning_rate': 1.0
            }
        }
    }

    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()
    optimizer = opt_factory.build_optimizer(lr)

    var0 = tf.Variable([1.0, 2.0])
    var1 = tf.Variable([3.0, 4.0])

    grads0 = tf.constant([0.1, 0.1])
    grads1 = tf.constant([2.0, 3.0])

    grads_and_vars = list(zip([grads0, grads1], [var0, var1]))
    optimizer.apply_gradients(grads_and_vars)

    self.assertAllClose(np.array([0.9, 1.9]), var0.numpy())
    if clipvalue is not None:
      self.assertAllClose(np.array([2.0, 3.0]), var1.numpy())
    elif clipnorm is not None:
      self.assertAllClose(np.array([2.4452999, 3.1679497]), var1.numpy())
    else:
      self.assertAllClose(np.array([1.0, 1.0]), var1.numpy())

  def test_missing_types(self):
    params = {'optimizer': {'type': 'sgd', 'sgd': {'momentum': 0.9}}}
    with self.assertRaises(ValueError):
      optimizer_factory.OptimizerFactory(
          optimization_config.OptimizationConfig(params))
    params = {
        'learning_rate': {
            'type': 'stepwise',
            'stepwise': {
                'boundaries': [10000, 20000],
                'values': [0.1, 0.01, 0.001]
            }
        }
    }
    with self.assertRaises(ValueError):
      optimizer_factory.OptimizerFactory(
          optimization_config.OptimizationConfig(params))


# TODO(b/187559334) refactor lr_schedule tests into `lr_schedule_test.py`.

  def test_stepwise_lr_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'stepwise',
            'stepwise': {
                'boundaries': [10000, 20000],
                'values': [0.1, 0.01, 0.001]
            }
        }
    }
    expected_lr_step_values = [[0, 0.1], [5000, 0.1], [10000, 0.1],
                               [10001, 0.01], [20000, 0.01], [20001, 0.001]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_stepwise_lr_with_warmup_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'stepwise',
            'stepwise': {
                'boundaries': [10000, 20000],
                'values': [0.1, 0.01, 0.001]
            }
        },
        'warmup': {
            'type': 'linear',
            'linear': {
                'warmup_steps': 500,
                'warmup_learning_rate': 0.01
            }
        }
    }
    expected_lr_step_values = [[0, 0.01], [250, 0.055], [500, 0.1], [5500, 0.1],
                               [10000, 0.1], [10001, 0.01], [20000, 0.01],
                               [20001, 0.001]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_exponential_lr_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'exponential',
            'exponential': {
                'initial_learning_rate': 0.1,
                'decay_steps': 1000,
                'decay_rate': 0.96,
                'staircase': True
            }
        }
    }
    expected_lr_step_values = [
        [0, 0.1],
        [999, 0.1],
        [1000, 0.096],
        [1999, 0.096],
        [2000, 0.09216],
    ]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_polynomial_lr_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'polynomial',
            'polynomial': {
                'initial_learning_rate': 0.1,
                'decay_steps': 1000,
                'end_learning_rate': 0.001
            }
        }
    }

    expected_lr_step_values = [[0, 0.1], [500, 0.0505], [1000, 0.001]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_cosine_lr_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'cosine',
            'cosine': {
                'initial_learning_rate': 0.1,
                'decay_steps': 1000
            }
        }
    }
    expected_lr_step_values = [[0, 0.1], [250, 0.08535534], [500, 0.04999999],
                               [750, 0.01464466], [1000, 0]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_constant_lr_with_warmup_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'constant',
            'constant': {
                'learning_rate': 0.1
            }
        },
        'warmup': {
            'type': 'linear',
            'linear': {
                'warmup_steps': 500,
                'warmup_learning_rate': 0.01
            }
        }
    }

    expected_lr_step_values = [[0, 0.01], [250, 0.055], [500, 0.1], [5000, 0.1],
                               [10000, 0.1], [20000, 0.1]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_stepwise_lr_with_polynomial_warmup_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'stepwise',
            'stepwise': {
                'boundaries': [10000, 20000],
                'values': [0.1, 0.01, 0.001]
            }
        },
        'warmup': {
            'type': 'polynomial',
            'polynomial': {
                'warmup_steps': 500,
                'power': 2.
            }
        }
    }
    expected_lr_step_values = [[0, 0.0], [250, 0.025], [500, 0.1], [5500, 0.1],
                               [10000, 0.1], [10001, 0.01], [20000, 0.01],
                               [20001, 0.001]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value, places=6)

  def test_power_lr_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'power',
            'power': {
                'initial_learning_rate': 1.0,
                'power': -1.0
            }
        }
    }
    expected_lr_step_values = [[0, 1.0], [1, 1.0], [250, 1. / 250.]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_power_linear_lr_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'power_linear',
            'power_linear': {
                'initial_learning_rate': 1.0,
                'power': -1.0,
                'linear_decay_fraction': 0.5,
                'total_decay_steps': 100,
                'offset': 0,
            }
        }
    }
    expected_lr_step_values = [[0, 1.0], [1, 1.0], [40, 1. / 40.],
                               [60, 1. / 60. * 0.8]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

  def test_power_with_offset_lr_schedule(self):
    params = {
        'optimizer': {
            'type': 'sgd',
            'sgd': {
                'momentum': 0.9
            }
        },
        'learning_rate': {
            'type': 'power_with_offset',
            'power_with_offset': {
                'initial_learning_rate': 1.0,
                'power': -1.0,
                'offset': 10,
                'pre_offset_learning_rate': 3.0,
            }
        }
    }
    expected_lr_step_values = [[1, 3.0], [10, 3.0], [20, 1. / 10.]]
    opt_config = optimization_config.OptimizationConfig(params)
    opt_factory = optimizer_factory.OptimizerFactory(opt_config)
    lr = opt_factory.build_learning_rate()

    for step, value in expected_lr_step_values:
      self.assertAlmostEqual(lr(step).numpy(), value)

if __name__ == '__main__':
  tf.test.main()
