添加mmaction2测试用例

README.md

@@ -95,8 +95,9 @@ DCU深度学习样例
 
 | 类别 | 版本 | DCU | 精度 | 多DCU | 支持网络 | 代码位置|
 | :----------: | :----------: | :----------: | :----------: | :----------: | :----------: | :----------: |
-| mmclassification | v0.24.0 | Yes | FP32/FP16 | Yes | ResNet18/ResNet34/ResNet50/ResNet152/Vgg11/SeresNet50/ResNext50/MobileNet-v2/ShuffleNet-v1/ShuffleNet-v2 | [mmclassfication](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmclassification-speed-benchmark) |
-| mmdetection | v2.25.2 | Yes | FP32/FP16 | Yes | Faster-Rcnn/Mask-Rcnn/Double-Heads/Cascade-Mask-Rcnn/ResNest/Dcn/RetinaNet/VfNet/Ssd/Yolov3 | [mmdetection](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmdetection-speed_xinpian) |
-| mmpose | v0.28.1 | Yes | FP32/FP16 | Yes | ResNet50-Top-Down/ResNet50-Bottom-Up/HrNet-Top-Down | [mmpose](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmpose-speed_test) |
-| mmsegmentation | v0.29.1 | Yes | FP32/FP16 | Yes | PspNet-R50/DeepLab-V3-R50/Fcn-R50/UperNet-R50/DeepLab-V3plus-R50 | [mmsegmentation](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmsegmentation) |
+| mmclassification | v0.24.0 | Yes | FP32/FP16 | Yes | ResNet18/ResNet34/ResNet50/ResNet152/Vgg11/SeresNet50/ResNext50/MobileNet-v2/ShuffleNet-v1/ShuffleNet-v2 | [mmclassfication](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmclassification-0.24.1) |
+| mmdetection | v2.25.2 | Yes | FP32/FP16 | Yes | Faster-Rcnn/Mask-Rcnn/Double-Heads/Cascade-Mask-Rcnn/ResNest/Dcn/RetinaNet/VfNet/Ssd/Yolov3 | [mmdetection](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmdetection-2.25.2) |
+| mmpose | v0.28.1 | Yes | FP32/FP16 | Yes | ResNet50-Top-Down/ResNet50-Bottom-Up/HrNet-Top-Down | [mmpose](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmpose-0.28.1) |
+| mmsegmentation | v0.29.1 | Yes | FP32/FP16 | Yes | PspNet-R50/DeepLab-V3-R50/Fcn-R50/UperNet-R50/DeepLab-V3plus-R50 | [mmsegmentation](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmsegmentation-0.29.1) |
+| mmaction2 | v0.24.1 | Yes | FP32/FP16 | Yes | ST-GCN/C3D/R(2+1)D | [mmaction2](http://10.0.50.24/dcutoolkit/deeplearing/dlexamples_new/-/tree/main/openmmlab_test/mmaction2-0.24.1) |
 

openmmlab_test/mmaction2-0.24.1/.github/CODE_OF_CONDUCT.md

+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and maintainers pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, sex characteristics, gender identity and expression,
+level of experience, education, socio-economic status, nationality, personal
+appearance, race, religion, or sexual identity and orientation.
+
+## Our Standards
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+- Using welcoming and inclusive language
+- Being respectful of differing viewpoints and experiences
+- Gracefully accepting constructive criticism
+- Focusing on what is best for the community
+- Showing empathy towards other community members
+
+Examples of unacceptable behavior by participants include:
+
+- The use of sexualized language or imagery and unwelcome sexual attention or
+  advances
+- Trolling, insulting/derogatory comments, and personal or political attacks
+- Public or private harassment
+- Publishing others' private information, such as a physical or electronic
+  address, without explicit permission
+- Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Our Responsibilities
+
+Project maintainers are responsible for clarifying the standards of acceptable
+behavior and are expected to take appropriate and fair corrective action in
+response to any instances of unacceptable behavior.
+
+Project maintainers have the right and responsibility to remove, edit, or
+reject comments, commits, code, wiki edits, issues, and other contributions
+that are not aligned to this Code of Conduct, or to ban temporarily or
+permanently any contributor for other behaviors that they deem inappropriate,
+threatening, offensive, or harmful.
+
+## Scope
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. Examples of
+representing a project or community include using an official project e-mail
+address, posting via an official social media account, or acting as an appointed
+representative at an online or offline event. Representation of a project may be
+further defined and clarified by project maintainers.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported by contacting the project team at chenkaidev@gmail.com. All
+complaints will be reviewed and investigated and will result in a response that
+is deemed necessary and appropriate to the circumstances. The project team is
+obligated to maintain confidentiality with regard to the reporter of an incident.
+Further details of specific enforcement policies may be posted separately.
+
+Project maintainers who do not follow or enforce the Code of Conduct in good
+faith may face temporary or permanent repercussions as determined by other
+members of the project's leadership.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4,
+available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html
+
+For answers to common questions about this code of conduct, see
+https://www.contributor-covenant.org/faq
+
+[homepage]: https://www.contributor-covenant.org

openmmlab_test/mmaction2-0.24.1/.github/CONTRIBUTING.md

+We appreciate all contributions to improve MMAction2. Please refer to [CONTRIBUTING.md](https://github.com/open-mmlab/mmcv/blob/master/CONTRIBUTING.md) in MMCV for more details about the contributing guideline.

openmmlab_test/mmaction2-0.24.1/.github/ISSUE_TEMPLATE/config.yml

+blank_issues_enabled: false
+
+contact_links:
+  - name: Common Issues
+    url: https://mmaction2.readthedocs.io/en/latest/faq.html
+    about: Check if your issue already has solutions
+  - name: MMAction2 Documentation
+    url: https://mmaction2.readthedocs.io/en/latest/
+    about: Check if your question is answered in docs

openmmlab_test/mmaction2-0.24.1/.github/ISSUE_TEMPLATE/error-report.md

+---
+name: Error report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+---
+
+Thanks for your error report and we appreciate it a lot.
+If you feel we have help you, give us a STAR! :satisfied:
+
+**Checklist**
+
+1. I have searched related issues but cannot get the expected help.
+2. The bug has not been fixed in the latest version.
+
+**Describe the bug**
+
+A clear and concise description of what the bug is.
+
+**Reproduction**
+
+1. What command or script did you run?
+
+```
+A placeholder for the command.
+```
+
+2. Did you make any modifications on the code or config? Did you understand what you have modified?
+3. What dataset did you use?
+
+**Environment**
+
+1. Please run `PYTHONPATH=${PWD}:$PYTHONPATH python mmaction/utils/collect_env.py` to collect necessary environment information and paste it here.
+2. You may add addition that may be helpful for locating the problem, such as
+   - How you installed PyTorch \[e.g., pip, conda, source\]
+   - Other environment variables that may be related (such as `$PATH`, `$LD_LIBRARY_PATH`, `$PYTHONPATH`, etc.)
+
+**Error traceback**
+
+If applicable, paste the error traceback here.
+
+```
+A placeholder for traceback.
+```
+
+**Bug fix**
+
+If you have already identified the reason, you can provide the information here. If you are willing to create a PR to fix it, please also leave a comment here and that would be much appreciated!

openmmlab_test/mmaction2-0.24.1/.github/ISSUE_TEMPLATE/feature_request.md

+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: ''
+assignees: ''
+---
+
+Thanks for your feature request and we will review and plan for it when necessary.
+If you feel we have help you, give us a STAR! :satisfied:
+
+**Describe the feature**
+
+**Motivation**
+
+A clear and concise description of the motivation of the feature.
+Ex1. It is inconvenient when \[....\].
+Ex2. There is a recent paper \[....\], which is very helpful for \[....\].
+
+**Related resources**
+
+If there is an official code released or third-party implementations, please also provide the information here, which would be very helpful.
+
+**Additional context**
+
+Add any other context or screenshots about the feature request here.
+If you would like to implement the feature and create a PR, please leave a comment here and that would be much appreciated.

openmmlab_test/mmaction2-0.24.1/.github/ISSUE_TEMPLATE/general_questions.md

+---
+name: General questions
+about: Ask general questions to get help
+title: ''
+labels: ''
+assignees: ''
+---
+
+Before raising a question, you may need to check the following listed items.
+
+**Checklist**
+
+1. I have searched related issues but cannot get the expected help.
+2. I have read the [FAQ documentation](https://mmaction2.readthedocs.io/en/latest/faq.html) but cannot get the expected help.

openmmlab_test/mmaction2-0.24.1/.github/ISSUE_TEMPLATE/reimplementation_questions.md

+---
+name: Reimplementation Questions
+about: Ask about questions during model reimplementation
+title: ''
+labels: reimplementation
+assignees: ''
+---
+
+If you feel we have help you, give us a STAR! :satisfied:
+
+**Notice**
+
+There are several common situations in the reimplementation issues as below
+
+1. Reimplement a model in the model zoo using the provided configs
+2. Reimplement a model in the model zoo on other dataset (e.g., custom datasets)
+3. Reimplement a custom model but all the components are implemented in MMAction2
+4. Reimplement a custom model with new modules implemented by yourself
+
+There are several things to do for different cases as below.
+
+- For case 1 & 3, please follow the steps in the following sections thus we could help to quick identify the issue.
+- For case 2 & 4, please understand that we are not able to do much help here because we usually do not know the full code and the users should be responsible to the code they write.
+- One suggestion for case 2 & 4 is that the users should first check whether the bug lies in the self-implemented code or the original code. For example, users can first make sure that the same model runs well on supported datasets. If you still need help, please describe what you have done and what you obtain in the issue, and follow the steps in the following sections and try as clear as possible so that we can better help you.
+
+**Checklist**
+
+1. I have searched related issues but cannot get the expected help.
+2. The issue has not been fixed in the latest version.
+
+**Describe the issue**
+
+A clear and concise description of what the problem you meet and what have you done.
+
+**Reproduction**
+
+1. What command or script did you run?
+
+```
+A placeholder for the command.
+```
+
+2. What config dir you run?
+
+```
+A placeholder for the config.
+```
+
+3. Did you make any modifications on the code or config? Did you understand what you have modified?
+4. What dataset did you use?
+
+**Environment**
+
+1. Please run `PYTHONPATH=${PWD}:$PYTHONPATH python mmaction/utils/collect_env.py` to collect necessary environment information and paste it here.
+2. You may add addition that may be helpful for locating the problem, such as
+   1. How you installed PyTorch \[e.g., pip, conda, source\]
+   2. Other environment variables that may be related (such as `$PATH`, `$LD_LIBRARY_PATH`, `$PYTHONPATH`, etc.)
+
+**Results**
+
+If applicable, paste the related results here, e.g., what you expect and what you get.
+
+```
+A placeholder for results comparison
+```
+
+**Issue fix**
+
+If you have already identified the reason, you can provide the information here. If you are willing to create a PR to fix it, please also leave a comment here and that would be much appreciated!

openmmlab_test/mmaction2-0.24.1/.github/pull_request_template.md

+Thanks for your contribution and we appreciate it a lot. The following instructions would make your pull request more healthy and more easily got feedback.
+If you do not understand some items, don't worry, just make the pull request and seek help from maintainers.
+
+## Motivation
+
+Please describe the motivation of this PR and the goal you want to achieve through this PR.
+
+## Modification
+
+Please briefly describe what modification is made in this PR.
+
+## BC-breaking (Optional)
+
+Does the modification introduces changes that break the back-compatibility of this repo?
+If so, please describe how it breaks the compatibility and how users should modify their codes to keep compatibility with this PR.
+
+## Use cases (Optional)
+
+If this PR introduces a new feature, it is better to list some use cases here, and update the documentation.
+
+## Checklist
+
+1. Pre-commit or other linting tools should be used to fix the potential lint issues.
+2. The modification should be covered by complete unit tests. If not, please add more unit tests to ensure the correctness.
+3. If the modification has potential influence on downstream projects, this PR should be tested with downstream projects, like MMDet or MMCls.
+4. The documentation should be modified accordingly, like docstring or example tutorials.

openmmlab_test/mmaction2-0.24.1/.github/workflows/build.yml

+name: build
+
+on:
+  push:
+    paths-ignore:
+      - ".github/**.md"
+      - "demo/**"
+      - "docker/**"
+      - "tools/**"
+      - "README.md"
+      - "README_zh-CN.md"
+
+  pull_request:
+    paths-ignore:
+      - ".github/**.md"
+      - "demo/**"
+      - "docker/**"
+      - "docs/**"
+      - "docs_zh-CN/**"
+      - "tools/**"
+      - "README.md"
+      - "README_zh-CN.md"
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  build_cpu:
+    runs-on: ubuntu-18.04
+    strategy:
+      matrix:
+        python-version: [3.7]
+        torch: [1.5.0, 1.7.0, 1.9.0]
+        include:
+          - torch: 1.5.0
+            torchvision: 0.6.0
+          - torch: 1.7.0
+            torchvision: 0.8.1
+          - torch: 1.9.0
+            torchvision: 0.10.0
+            python-version: 3.7
+          - torch: 1.9.0
+            torchvision: 0.10.0
+            python-version: 3.8
+          - torch: 1.9.0
+            torchvision: 0.10.0
+            python-version: 3.9
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python ${{ matrix.python-version }}
+        uses: actions/setup-python@v2
+        with:
+          python-version: ${{ matrix.python-version }}
+      - name: Upgrade pip
+        run: pip install pip --upgrade
+      - name: Install soundfile lib
+        run: sudo apt-get install -y libsndfile1
+      - name: Install onnx
+        run: pip install onnx
+      - name: Install librosa and soundfile
+        run: pip install librosa soundfile
+      - name: Install lmdb
+        run: pip install lmdb
+      - name: Install TurboJpeg lib
+        run: sudo apt-get install -y libturbojpeg
+      - name: Install PyTorch
+        run: pip install torch==${{matrix.torch}}+cpu torchvision==${{matrix.torchvision}}+cpu -f https://download.pytorch.org/whl/torch_stable.html
+      - name: Install MMCV
+        run: pip install mmcv-full -f https://download.openmmlab.com/mmcv/dist/cpu/torch${{matrix.torch}}/index.html
+      - name: Install MMDet
+        run: pip install git+https://github.com/open-mmlab/mmdetection/
+      - name: Install MMCls
+        run: pip install git+https://github.com/open-mmlab/mmclassification/
+      - name: Install unittest dependencies
+        run: pip install -r requirements/tests.txt -r requirements/optional.txt
+      - name: Install PytorchVideo
+        run: pip install pytorchvideo
+        if: ${{matrix.torchvision == '0.10.0'}}
+      - name: Build and install
+        run: rm -rf .eggs && pip install -e .
+      - name: Run unittests and generate coverage report
+        run: |
+          coverage run --branch --source mmaction -m pytest tests/
+          coverage xml
+          coverage report -m
+  build_cu101:
+    runs-on: ubuntu-18.04
+    container:
+      image: pytorch/pytorch:1.6.0-cuda10.1-cudnn7-devel
+
+    strategy:
+      matrix:
+        python-version: [3.7]
+        torch: [1.5.0+cu101, 1.6.0+cu101, 1.7.0+cu101]
+        include:
+          - torch: 1.5.0+cu101
+            torch_version: torch1.5
+            torchvision: 0.6.0+cu101
+          - torch: 1.6.0+cu101
+            torch_version: torch1.6
+            torchvision: 0.7.0+cu101
+          - torch: 1.7.0+cu101
+            torch_version: torch1.7
+            torchvision: 0.8.1+cu101
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python ${{ matrix.python-version }}
+        uses: actions/setup-python@v2
+        with:
+          python-version: ${{ matrix.python-version }}
+      - name: Upgrade pip
+        run: pip install pip --upgrade
+      - name: Fetch GPG keys
+        run: |
+          apt-key adv --fetch-keys https://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/3bf863cc.pub
+          apt-key adv --fetch-keys https://developer.download.nvidia.com/compute/machine-learning/repos/ubuntu1804/x86_64/7fa2af80.pub
+      - name: Install CUDA
+        run: |
+          apt-get update && apt-get install -y ffmpeg libsm6 libxext6 git ninja-build libglib2.0-0 libturbojpeg libsndfile1 libsm6 libxrender-dev libxext6 python${{matrix.python-version}}-dev
+          apt-get clean
+          rm -rf /var/lib/apt/lists/*
+      - name: Install librosa and soundfile
+        run: python -m pip install librosa soundfile
+      - name: Install lmdb
+        run: python -m pip install lmdb
+      - name: Install PyTorch
+        run: python -m pip install torch==${{matrix.torch}} torchvision==${{matrix.torchvision}} -f https://download.pytorch.org/whl/torch_stable.html
+      - name: Install mmaction dependencies
+        run: |
+          python -V
+          python -m pip install mmcv-full -f https://download.openmmlab.com/mmcv/dist/cu101/${{matrix.torch_version}}/index.html
+          python -m pip install -q git+https://github.com/open-mmlab/mmdetection/
+          python -m pip install -q git+https://github.com/open-mmlab/mmclassification/
+          python -m pip install -r requirements.txt
+          python -c 'import mmcv; print(mmcv.__version__)'
+      - name: Build and install
+        run: rm -rf .eggs && pip install -e .
+      - name: Run unittests and generate coverage report
+        run: |
+          coverage run --branch --source mmaction -m pytest tests/
+          coverage xml
+          coverage report -m
+      # Only upload coverage report for python3.7 && pytorch1.5
+      - name: Upload coverage to Codecov
+        if: ${{matrix.torch == '1.5.0+cu101' && matrix.python-version == '3.7'}}
+        uses: codecov/codecov-action@v1.0.14
+        with:
+          file: ./coverage.xml
+          flags: unittests
+          env_vars: OS,PYTHON
+          name: codecov-umbrella
+          fail_ci_if_error: false
+
+  build_cu102:
+    runs-on: ubuntu-18.04
+    container:
+      image: pytorch/pytorch:1.9.0-cuda10.2-cudnn7-devel
+
+    strategy:
+      matrix:
+        python-version: [3.7]
+        torch: [1.9.0+cu102]
+        include:
+          - torch: 1.9.0+cu102
+            torch_version: torch1.9
+            torchvision: 0.10.0+cu102
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python ${{ matrix.python-version }}
+        uses: actions/setup-python@v2
+        with:
+          python-version: ${{ matrix.python-version }}
+      - name: Upgrade pip
+        run: pip install pip --upgrade
+      - name: Fetch GPG keys
+        run: |
+          apt-key adv --fetch-keys https://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/3bf863cc.pub
+          apt-key adv --fetch-keys https://developer.download.nvidia.com/compute/machine-learning/repos/ubuntu1804/x86_64/7fa2af80.pub
+      - name: Install CUDA
+        run: |
+          apt-get update && apt-get install -y ffmpeg libsm6 libxext6 git ninja-build libglib2.0-0 libturbojpeg libsndfile1 libsm6 libxrender-dev libxext6 python${{matrix.python-version}}-dev
+          apt-get clean
+          rm -rf /var/lib/apt/lists/*
+      - name: Install librosa and soundfile
+        run: python -m pip install librosa soundfile
+      - name: Install lmdb
+        run: python -m pip install lmdb
+      - name: Install PyTorch
+        run: python -m pip install torch==${{matrix.torch}} torchvision==${{matrix.torchvision}} -f https://download.pytorch.org/whl/torch_stable.html
+      - name: Install mmaction dependencies
+        run: |
+          python -V
+          python -m pip install mmcv-full -f https://download.openmmlab.com/mmcv/dist/cu102/${{matrix.torch_version}}/index.html
+          python -m pip install -q git+https://github.com/open-mmlab/mmdetection/
+          python -m pip install -q git+https://github.com/open-mmlab/mmclassification/
+          python -m pip install -r requirements.txt
+          python -c 'import mmcv; print(mmcv.__version__)'
+      - name: Install PytorchVideo
+        run: python -m pip install pytorchvideo
+        if: ${{matrix.torchvision == '0.10.0+cu102'}}
+      - name: Build and install
+        run: rm -rf .eggs && pip install -e .
+      - name: Run unittests and generate coverage report
+        run: |
+          coverage run --branch --source mmaction -m pytest tests/
+          coverage xml
+          coverage report -m
+
+  test_windows:
+    runs-on: ${{ matrix.os }}
+    strategy:
+      matrix:
+        os: [windows-2022]
+        python: [3.8]
+        platform: [cpu]
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python ${{ matrix.python }}
+        uses: actions/setup-python@v2
+        with:
+          python-version: ${{ matrix.python }}
+      - name: Upgrade pip
+        run: python -m pip install pip --upgrade --user
+      - name: Install librosa and soundfile
+        run: python -m pip install librosa soundfile
+      - name: Install lmdb
+        run: python -m pip install lmdb
+      - name: Install PyTorch
+        # As a complement to Linux CI, we test on PyTorch LTS version
+        run: pip install torch==1.8.2+${{ matrix.platform }} torchvision==0.9.2+${{ matrix.platform }} -f https://download.pytorch.org/whl/lts/1.8/torch_lts.html
+      - name: Install MMCV
+        run: pip install mmcv-full -f https://download.openmmlab.com/mmcv/dist/cpu/torch1.8/index.html --only-binary mmcv-full
+      - name: Install mmaction dependencies
+        run: |
+          python -V
+          python -m pip install -q git+https://github.com/open-mmlab/mmdetection/
+          python -m pip install -q git+https://github.com/open-mmlab/mmclassification/
+          python -m pip install -r requirements.txt
+          python -c 'import mmcv; print(mmcv.__version__)'
+      - name: Install PytorchVideo
+        run: python -m pip install pytorchvideo
+      - name: Show pip list
+        run: pip list
+      - name: Build and install
+        run: pip install -e .
+      - name: Run unittests
+        run: coverage run --branch --source mmedit -m pytest tests -sv

openmmlab_test/mmaction2-0.24.1/.github/workflows/deploy.yml

+name: deploy
+
+on: push
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  build-n-publish:
+    runs-on: ubuntu-latest
+    if: startsWith(github.event.ref, 'refs/tags')
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python 3.7
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.7
+      - name: Build MMAction2
+        run: |
+          pip install wheel
+          python setup.py sdist bdist_wheel
+      - name: Publish distribution to PyPI
+        run: |
+          pip install twine
+          twine upload dist/* -u __token__ -p ${{ secrets.pypi_password }}

openmmlab_test/mmaction2-0.24.1/.github/workflows/lint.yml

+name: lint
+
+on: [push, pull_request]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python 3.7
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.7
+      - name: Install pre-commit hook
+        run: |
+          pip install pre-commit
+          pre-commit install
+      - name: Linting
+        run: pre-commit run --all-files
+      - name: Check docstring coverage
+        run: |
+          pip install interrogate
+          interrogate -v --ignore-init-method --ignore-module --ignore-nested-functions --ignore-regex "__repr__" --fail-under 80 mmaction

openmmlab_test/mmaction2-0.24.1/.github/workflows/test_mim.yml

+name: test-mim
+
+on:
+  push:
+    paths:
+      - 'model-index.yml'
+      - 'configs/**'
+
+  pull_request:
+    paths:
+      - 'model-index.yml'
+      - 'configs/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  build_cpu:
+    runs-on: ubuntu-18.04
+    strategy:
+      matrix:
+        python-version: [3.7]
+        torch: [1.8.0]
+        include:
+          - torch: 1.8.0
+            torch_version: torch1.8
+            torchvision: 0.9.0
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python ${{ matrix.python-version }}
+        uses: actions/setup-python@v2
+        with:
+          python-version: ${{ matrix.python-version }}
+      - name: Upgrade pip
+        run: pip install pip --upgrade
+      - name: Install Pillow
+        run: pip install Pillow==6.2.2
+        if: ${{matrix.torchvision == '0.4.2'}}
+      - name: Install PyTorch
+        run: pip install torch==${{matrix.torch}}+cpu torchvision==${{matrix.torchvision}}+cpu -f https://download.pytorch.org/whl/torch_stable.html
+      - name: Install openmim
+        run: pip install openmim
+      - name: Build and install
+        run: rm -rf .eggs && mim install -e .
+      - name: test commands of mim
+        run: mim search mmaction2

openmmlab_test/mmaction2-0.24.1/.gitignore

+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
+*$py.class
+**/*.pyc
+
+# C extensions
+*.so
+
+# Distribution / packaging
+.Python
+build/
+develop-eggs/
+dist/
+downloads/
+eggs/
+.eggs/
+lib/
+lib64/
+parts/
+sdist/
+var/
+wheels/
+*.egg-info/
+.installed.cfg
+*.egg
+MANIFEST
+
+# PyInstaller
+#  Usually these files are written by a python script from a template
+#  before PyInstaller builds the exe, so as to inject date/other infos into it.
+*.manifest
+*.spec
+
+# Installer logs
+pip-log.txt
+pip-delete-this-directory.txt
+
+# Unit test / coverage reports
+htmlcov/
+.tox/
+.coverage
+.coverage.*
+.cache
+nosetests.xml
+coverage.xml
+*.cover
+.hypothesis/
+.pytest_cache/
+
+# Translations
+*.mo
+*.pot
+
+# Django stuff:
+*.log
+local_settings.py
+db.sqlite3
+
+# Flask stuff:
+instance/
+.webassets-cache
+
+# Scrapy stuff:
+.scrapy
+
+# Sphinx documentation
+docs/_build/
+
+# PyBuilder
+target/
+
+# Jupyter Notebook
+.ipynb_checkpoints
+
+# pyenv
+.python-version
+
+# celery beat schedule file
+celerybeat-schedule
+
+# SageMath parsed files
+*.sage.py
+
+# Environments
+.env
+.venv
+env/
+venv/
+ENV/
+env.bak/
+venv.bak/
+
+# Spyder project settings
+.spyderproject
+.spyproject
+
+# Rope project settings
+.ropeproject
+
+# mkdocs documentation
+/site
+
+# mypy
+.mypy_cache/
+
+# custom
+/data
+.vscode
+.idea
+*.pkl
+*.pkl.json
+*.log.json
+benchlist.txt
+work_dirs/
+
+# Pytorch
+*.pth
+
+# Profile
+*.prof
+
+# lmdb
+*.mdb
+
+# unignore some data file in tests/data
+!tests/data/**/*.pkl
+!tests/data/**/*.pkl.json
+!tests/data/**/*.log.json
+!tests/data/**/*.pth
+
+# avoid soft links created by MIM
+mmaction/configs/*
+mmaction/tools/*
+
+*.ipynb
+
+# unignore ipython notebook files in demo
+!demo/*.ipynb
+mmaction/.mim

openmmlab_test/mmaction2-0.24.1/.pre-commit-config.yaml

+exclude: ^tests/data/
+repos:
+  - repo: https://github.com/PyCQA/flake8
+    rev: 3.8.3
+    hooks:
+      - id: flake8
+  - repo: https://github.com/PyCQA/isort
+    rev: 5.10.1
+    hooks:
+      - id: isort
+  - repo: https://github.com/pre-commit/mirrors-yapf
+    rev: v0.30.0
+    hooks:
+      - id: yapf
+  - repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: v3.1.0
+    hooks:
+      - id: trailing-whitespace
+      - id: check-yaml
+      - id: end-of-file-fixer
+      - id: requirements-txt-fixer
+      - id: double-quote-string-fixer
+      - id: check-merge-conflict
+      - id: fix-encoding-pragma
+        args: ["--remove"]
+      - id: mixed-line-ending
+        args: ["--fix=lf"]
+  - repo: https://github.com/executablebooks/mdformat
+    rev: 0.7.9
+    hooks:
+      - id: mdformat
+        args: ["--number"]
+        additional_dependencies:
+          - mdformat-openmmlab
+          - mdformat_frontmatter
+          - linkify-it-py
+  - repo: https://github.com/myint/docformatter
+    rev: v1.3.1
+    hooks:
+      - id: docformatter
+        args: ["--in-place", "--wrap-descriptions", "79"]
+  - repo: https://github.com/codespell-project/codespell
+    rev: v2.1.0
+    hooks:
+      - id: codespell
+        args: ["--skip", "*.ipynb,tools/data/hvu/label_map.json,docs_zh_CN/*", "-L", "te,nd,thre,Gool,gool"]
+  - repo: https://github.com/open-mmlab/pre-commit-hooks
+    rev: v0.2.0  # Use the ref you want to point at
+    hooks:
+      - id: check-algo-readme
+      - id: check-copyright
+        args: ["mmaction", "tests", "demo", "tools"]  # these directories will be checked

openmmlab_test/mmaction2-0.24.1/.pylintrc

+[MASTER]
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code.
+extension-pkg-whitelist=
+
+# Specify a score threshold to be exceeded before program exits with error.
+fail-under=10
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS,configs
+
+# Add files or directories matching the regex patterns to the blacklist. The
+# regex matches against base names, not paths.
+ignore-patterns=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
+# number of processors available to use.
+jobs=1
+
+# Control the amount of potential inferred values when inferring a single
+# object. This can help the performance when dealing with large functions or
+# complex, nested conditions.
+limit-inference-results=100
+
+# List of plugins (as comma separated values of python module names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# When enabled, pylint would attempt to guess common misconfiguration and emit
+# user-friendly hints instead of false-positive error messages.
+suggestion-mode=yes
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
+confidence=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once). You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use "--disable=all --enable=classes
+# --disable=W".
+disable=import-outside-toplevel
+        redefined-outer-name
+        print-statement,
+        parameter-unpacking,
+        unpacking-in-except,
+        old-raise-syntax,
+        backtick,
+        long-suffix,
+        old-ne-operator,
+        old-octal-literal,
+        import-star-module-level,
+        non-ascii-bytes-literal,
+        raw-checker-failed,
+        bad-inline-option,
+        locally-disabled,
+        file-ignored,
+        suppressed-message,
+        useless-suppression,
+        deprecated-pragma,
+        use-symbolic-message-instead,
+        apply-builtin,
+        basestring-builtin,
+        buffer-builtin,
+        cmp-builtin,
+        coerce-builtin,
+        execfile-builtin,
+        file-builtin,
+        long-builtin,
+        raw_input-builtin,
+        reduce-builtin,
+        standarderror-builtin,
+        unicode-builtin,
+        xrange-builtin,
+        coerce-method,
+        delslice-method,
+        getslice-method,
+        setslice-method,
+        no-absolute-import,
+        old-division,
+        dict-iter-method,
+        dict-view-method,
+        next-method-called,
+        metaclass-assignment,
+        indexing-exception,
+        raising-string,
+        reload-builtin,
+        oct-method,
+        hex-method,
+        nonzero-method,
+        cmp-method,
+        input-builtin,
+        round-builtin,
+        intern-builtin,
+        unichr-builtin,
+        map-builtin-not-iterating,
+        zip-builtin-not-iterating,
+        range-builtin-not-iterating,
+        filter-builtin-not-iterating,
+        using-cmp-argument,
+        eq-without-hash,
+        div-method,
+        idiv-method,
+        rdiv-method,
+        exception-message-attribute,
+        invalid-str-codec,
+        sys-max-int,
+        bad-python3-import,
+        deprecated-string-function,
+        deprecated-str-translate-call,
+        deprecated-itertools-function,
+        deprecated-types-field,
+        next-method-defined,
+        dict-items-not-iterating,
+        dict-keys-not-iterating,
+        dict-values-not-iterating,
+        deprecated-operator-function,
+        deprecated-urllib-function,
+        xreadlines-attribute,
+        deprecated-sys-function,
+        exception-escape,
+        comprehension-escape,
+        no-member,
+        invalid-name,
+        too-many-branches,
+        wrong-import-order,
+        too-many-arguments,
+        missing-function-docstring,
+        missing-module-docstring,
+        too-many-locals,
+        too-few-public-methods,
+        abstract-method,
+        broad-except,
+        too-many-nested-blocks,
+        too-many-instance-attributes,
+        missing-class-docstring,
+        duplicate-code,
+        not-callable,
+        protected-access,
+        dangerous-default-value,
+        no-name-in-module,
+        logging-fstring-interpolation,
+        super-init-not-called,
+        redefined-builtin,
+        attribute-defined-outside-init,
+        arguments-differ,
+        cyclic-import,
+        bad-super-call,
+        too-many-statements,
+        line-too-long
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time (only on the command line, not in the configuration file where
+# it should appear only once). See also the "--disable" option for examples.
+enable=c-extension-no-member
+
+
+[REPORTS]
+
+# Python expression which should return a score less than or equal to 10. You
+# have access to the variables 'error', 'warning', 'refactor', and 'convention'
+# which contain the number of messages in each category, as well as 'statement'
+# which is the total number of statements analyzed. This score is used by the
+# global evaluation report (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details.
+#msg-template=
+
+# Set the output format. Available formats are text, parseable, colorized, json
+# and msvs (visual studio). You can also give a reporter class, e.g.
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Tells whether to display a full report or only the messages.
+reports=no
+
+# Activate the evaluation score.
+score=yes
+
+
+[REFACTORING]
+
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
+
+# Complete name of functions that never returns. When checking for
+# inconsistent-return-statements if a never returning function is called then
+# it will be considered as an explicit return statement and no message will be
+# printed.
+never-returning-functions=sys.exit
+
+
+[TYPECHECK]
+
+# List of decorators that produce context managers, such as
+# contextlib.contextmanager. Add to this list to register other decorators that
+# produce valid context managers.
+contextmanager-decorators=contextlib.contextmanager
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# Tells whether to warn about missing members when the owner of the attribute
+# is inferred to be None.
+ignore-none=yes
+
+# This flag controls whether pylint should warn about no-member and similar
+# checks whenever an opaque object is returned when inferring. The inference
+# can return multiple potential results while evaluating a Python object, but
+# some branches might not be evaluated, which results in partial inference. In
+# that case, it might be useful to still emit no-member and other checks for
+# the rest of the inferred objects.
+ignore-on-opaque-inference=yes
+
+# List of class names for which member attributes should not be checked (useful
+# for classes with dynamically set attributes). This supports the use of
+# qualified names.
+ignored-classes=optparse.Values,thread._local,_thread._local
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis). It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=
+
+# Show a hint with possible names when a member name was not found. The aspect
+# of finding the hint is based on edit distance.
+missing-member-hint=yes
+
+# The minimum edit distance a name should have in order to be considered a
+# similar match for a missing member name.
+missing-member-hint-distance=1
+
+# The total number of similar names that should be taken in consideration when
+# showing a hint for a missing member.
+missing-member-max-choices=1
+
+# List of decorators that change the signature of a decorated function.
+signature-mutators=
+
+
+[SPELLING]
+
+# Limits count of emitted suggestions for spelling mistakes.
+max-spelling-suggestions=4
+
+# Spelling dictionary name. Available dictionaries: none. To make it work,
+# install the python-enchant package.
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains the private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to the private dictionary (see the
+# --spelling-private-dict-file option) instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[LOGGING]
+
+# The type of string formatting that logging methods do. `old` means using %
+# formatting, `new` is for `{}` formatting.
+logging-format-style=old
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format.
+logging-modules=logging
+
+
+[VARIABLES]
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid defining new builtins when possible.
+additional-builtins=
+
+# Tells whether unused global variables should be treated as a violation.
+allow-global-unused-variables=yes
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,
+          _cb
+
+# A regular expression matching the name of dummy variables (i.e. expected to
+# not be used).
+dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore.
+ignored-argument-names=_.*|^ignored_|^unused_
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# List of qualified module names which can have objects that can redefine
+# builtins.
+redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
+
+
+[FORMAT]
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Number of spaces of indent required inside a hanging or continued line.
+indent-after-paren=4
+
+# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
+# tab).
+indent-string='    '
+
+# Maximum number of characters on a single line.
+max-line-length=100
+
+# Maximum number of lines in a module.
+max-module-lines=1000
+
+# Allow the body of a class to be on the same line as the declaration if body
+# contains single statement.
+single-line-class-stmt=no
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+
+[STRING]
+
+# This flag controls whether inconsistent-quotes generates a warning when the
+# character used as a quote delimiter is used inconsistently within a module.
+check-quote-consistency=no
+
+# This flag controls whether the implicit-str-concat should generate a warning
+# on implicit string concatenation in sequences defined over several lines.
+check-str-concat-over-line-jumps=no
+
+
+[SIMILARITIES]
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,
+      XXX,
+      TODO
+
+# Regular expression of note tags to take in consideration.
+#notes-rgx=
+
+
+[BASIC]
+
+# Naming style matching correct argument names.
+argument-naming-style=snake_case
+
+# Regular expression matching correct argument names. Overrides argument-
+# naming-style.
+#argument-rgx=
+
+# Naming style matching correct attribute names.
+attr-naming-style=snake_case
+
+# Regular expression matching correct attribute names. Overrides attr-naming-
+# style.
+#attr-rgx=
+
+# Bad variable names which should always be refused, separated by a comma.
+bad-names=foo,
+          bar,
+          baz,
+          toto,
+          tutu,
+          tata
+
+# Bad variable names regexes, separated by a comma. If names match any regex,
+# they will always be refused
+bad-names-rgxs=
+
+# Naming style matching correct class attribute names.
+class-attribute-naming-style=any
+
+# Regular expression matching correct class attribute names. Overrides class-
+# attribute-naming-style.
+#class-attribute-rgx=
+
+# Naming style matching correct class names.
+class-naming-style=PascalCase
+
+# Regular expression matching correct class names. Overrides class-naming-
+# style.
+#class-rgx=
+
+# Naming style matching correct constant names.
+const-naming-style=UPPER_CASE
+
+# Regular expression matching correct constant names. Overrides const-naming-
+# style.
+#const-rgx=
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+# Naming style matching correct function names.
+function-naming-style=snake_case
+
+# Regular expression matching correct function names. Overrides function-
+# naming-style.
+#function-rgx=
+
+# Good variable names which should always be accepted, separated by a comma.
+good-names=i,
+           j,
+           k,
+           ex,
+           Run,
+           _,
+           x,
+           y,
+           w,
+           h,
+           a,
+           b
+
+# Good variable names regexes, separated by a comma. If names match any regex,
+# they will always be accepted
+good-names-rgxs=
+
+# Include a hint for the correct naming format with invalid-name.
+include-naming-hint=no
+
+# Naming style matching correct inline iteration names.
+inlinevar-naming-style=any
+
+# Regular expression matching correct inline iteration names. Overrides
+# inlinevar-naming-style.
+#inlinevar-rgx=
+
+# Naming style matching correct method names.
+method-naming-style=snake_case
+
+# Regular expression matching correct method names. Overrides method-naming-
+# style.
+#method-rgx=
+
+# Naming style matching correct module names.
+module-naming-style=snake_case
+
+# Regular expression matching correct module names. Overrides module-naming-
+# style.
+#module-rgx=
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=^_
+
+# List of decorators that produce properties, such as abc.abstractproperty. Add
+# to this list to register other decorators that produce valid properties.
+# These decorators are taken in consideration only for invalid-name.
+property-classes=abc.abstractproperty
+
+# Naming style matching correct variable names.
+variable-naming-style=snake_case
+
+# Regular expression matching correct variable names. Overrides variable-
+# naming-style.
+#variable-rgx=
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method.
+max-args=5
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Maximum number of boolean expressions in an if statement (see R0916).
+max-bool-expr=5
+
+# Maximum number of branch for function / method body.
+max-branches=12
+
+# Maximum number of locals for function / method body.
+max-locals=15
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of return / yield for function / method body.
+max-returns=6
+
+# Maximum number of statements in function / method body.
+max-statements=50
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+
+[IMPORTS]
+
+# List of modules that can be imported at any level, not just the top level
+# one.
+allow-any-import-level=
+
+# Allow wildcard imports from modules that define __all__.
+allow-wildcard-with-all=no
+
+# Analyse import fallback blocks. This can be used to support both Python 2 and
+# 3 compatible code, which means that the block might have code that exists
+# only in one or another interpreter, leading to false positives when analysed.
+analyse-fallback-blocks=no
+
+# Deprecated modules which should not be used, separated by a comma.
+deprecated-modules=optparse,tkinter.tix
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled).
+ext-import-graph=
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled).
+import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled).
+int-import-graph=
+
+# Force import order to recognize a module as part of the standard
+# compatibility libraries.
+known-standard-library=
+
+# Force import order to recognize a module as part of a third party library.
+known-third-party=enchant
+
+# Couples of modules and preferred modules, separated by a comma.
+preferred-modules=
+
+
+[CLASSES]
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,
+                      __new__,
+                      setUp,
+                      __post_init__
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,
+                  _fields,
+                  _replace,
+                  _source,
+                  _make
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=cls
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "BaseException, Exception".
+overgeneral-exceptions=BaseException,
+                       Exception

openmmlab_test/mmaction2-0.24.1/.readthedocs.yml

+version: 2
+
+python:
+    version: 3.7
+    install:
+      - requirements: requirements/docs.txt
+      - requirements: requirements/readthedocs.txt

openmmlab_test/mmaction2-0.24.1/CITATION.cff

+cff-version: 1.2.0
+message: "If you use this software, please cite it as below."
+authors:
+  - name: "MMAction2 Contributors"
+title: "OpenMMLab's Next Generation Video Understanding Toolbox and Benchmark"
+date-released: 2020-07-21
+url: "https://github.com/open-mmlab/mmaction2"
+license: Apache-2.0

openmmlab_test/mmaction2-0.24.1/LICENSE

+Copyright 2018-2019 Open-MMLab. All rights reserved.
+
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright 2018-2019 Open-MMLab.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

openmmlab_test/mmaction2-0.24.1/MANIFEST.in

+include mmaction/.mim/model-index.yml
+recursive-include mmaction/.mim/configs *.py *.yml
+recursive-include mmaction/.mim/tools *.sh *.py