IA32 ARM64 support

INSTALL/ventoy_pack.sh

@@ -61,7 +61,9 @@ cp -a ./tool/ENROLL_THIS_KEY_IN_MOKMANAGER.cer $tmpmnt/
 
 
 mkdir -p $tmpmnt/tool
-cp -a ./tool/mount*     $tmpmnt/tool/
+cp -a ./tool/i386/mount.exfat-fuse     $tmpmnt/tool/mount.exfat-fuse_i386
+cp -a ./tool/x86_64/mount.exfat-fuse   $tmpmnt/tool/mount.exfat-fuse_x86_64
+cp -a ./tool/aarch64/mount.exfat-fuse  $tmpmnt/tool/mount.exfat-fuse_aarch64
 
 rm -f $tmpmnt/grub/i386-pc/*.img
 
@@ -96,16 +98,18 @@ rm -f ventoy-${curver}-linux.tar.gz
 
 
 CurDir=$PWD
-cd $tmpdir/tool
 
-for file in $(ls); do
-    if [ "$file" != "xzcat" ] && [ "$file" != "ventoy_lib.sh" ]; then
-        xz --check=crc32 $file
-    fi
+for d in i386 x86_64 aarch64; do
+    cd $tmpdir/tool/$d
+    for file in $(ls); do
+        if [ "$file" != "xzcat" ]; then
+            xz --check=crc32 $file
+        fi
+    done
+    cd $CurDir
 done
 
 #chmod 
-cd $CurDir
 find $tmpdir/ -type d -exec chmod 755 "{}" +
 find $tmpdir/ -type f -exec chmod 644 "{}" +
 chmod +x $tmpdir/Ventoy2Disk.sh

LZIP/smallz4cat.c

+// //////////////////////////////////////////////////////////
+// smallz4cat.c
+// Copyright (c) 2016-2019 Stephan Brumme. All rights reserved.
+// see https://create.stephan-brumme.com/smallz4/
+//
+// "MIT License":
+// Permission is hereby granted, free of charge, to any person obtaining a copy
+// of this software and associated documentation files (the "Software"),
+// to deal in the Software without restriction, including without limitation
+// the rights to use, copy, modify, merge, publish, distribute, sublicense,
+// and/or sell copies of the Software, and to permit persons to whom the Software
+// is furnished to do so, subject to the following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
+// INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+// PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+// HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+// OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+// This program is a shorter, more readable, albeit slower re-implementation of lz4cat ( https://github.com/Cyan4973/xxHash )
+
+// compile: gcc smallz4cat.c -O3 -o smallz4cat -Wall -pedantic -std=c99 -s
+// The static 8k binary was compiled using Clang and dietlibc (see https://www.fefe.de/dietlibc/ )
+
+// Limitations:
+// - skippable frames and legacy frames are not implemented (and most likely never will)
+// - checksums are not verified (see https://create.stephan-brumme.com/xxhash/ for a simple implementation)
+
+// Replace getByteFromIn() and sendToOut() by your own code if you need in-memory LZ4 decompression.
+// Corrupted data causes a call to unlz4error().
+
+// suppress warnings when compiled by Visual C++
+#define _CRT_SECURE_NO_WARNINGS
+
+#include <stdio.h>  // stdin/stdout/stderr, fopen, ...
+#include <stdlib.h> // exit()
+#include <string.h> // memcpy
+
+#ifndef FALSE
+#define FALSE 0
+#define TRUE  1
+#endif
+
+/// error handler
+static void unlz4error(const char* msg)
+{
+  // smaller static binary than fprintf(stderr, "ERROR: %s\n", msg);
+  fputs("ERROR: ", stderr);
+  fputs(msg,       stderr);
+  fputc('\n',      stderr);
+  exit(1);
+}
+
+
+// ==================== I/O INTERFACE ====================
+
+
+// read one byte from input, see getByteFromIn()  for a basic implementation
+typedef unsigned char (*GET_BYTE)  (void* userPtr);
+// write several bytes,      see sendBytesToOut() for a basic implementation
+typedef void          (*SEND_BYTES)(const unsigned char*, unsigned int, void* userPtr);
+
+struct UserPtr
+{
+  // file handles
+  FILE* in;
+  FILE* out;
+  // modify input buffer size as you like ... for most use cases, bigger buffer aren't faster anymore - and even reducing to 1 byte works !
+#define READ_BUFFER_SIZE 4*1024
+  unsigned char readBuffer[READ_BUFFER_SIZE];
+  unsigned int  pos;
+  unsigned int  available;
+};
+
+/// read a single byte (with simple buffering)
+static unsigned char getByteFromIn(void* userPtr) // parameter "userPtr" not needed
+{
+  /// cast user-specific data
+  struct UserPtr* user = (struct UserPtr*)userPtr;
+
+  // refill buffer
+  if (user->pos == user->available)
+  {
+    user->pos = 0;
+    user->available = fread(user->readBuffer, 1, READ_BUFFER_SIZE, user->in);
+    if (user->available == 0)
+      unlz4error("out of data");
+  }
+
+  // return a byte
+  return user->readBuffer[user->pos++];
+}
+
+/// write a block of bytes
+static void sendBytesToOut(const unsigned char* data, unsigned int numBytes, void* userPtr)
+{
+  /// cast user-specific data
+  struct UserPtr* user = (struct UserPtr*)userPtr;
+  if (data != NULL && numBytes > 0)
+    fwrite(data, 1, numBytes, user->out);
+}
+
+
+// ==================== LZ4 DECOMPRESSOR ====================
+
+
+/// decompress everything in input stream (accessed via getByte) and write to output stream (via sendBytes)
+void unlz4_userPtr(GET_BYTE getByte, SEND_BYTES sendBytes, const char* dictionary, void* userPtr)
+{
+  // signature
+  unsigned char signature1 = getByte(userPtr);
+  unsigned char signature2 = getByte(userPtr);
+  unsigned char signature3 = getByte(userPtr);
+  unsigned char signature4 = getByte(userPtr);
+  unsigned int  signature  = (signature4 << 24) | (signature3 << 16) | (signature2 << 8) | signature1;
+  unsigned char isModern   = (signature == 0x184D2204);
+  unsigned char isLegacy   = (signature == 0x184C2102);
+  if (!isModern && !isLegacy)
+    unlz4error("invalid signature");
+
+  unsigned char hasBlockChecksum   = FALSE;
+  unsigned char hasContentSize     = FALSE;
+  unsigned char hasContentChecksum = FALSE;
+  unsigned char hasDictionaryID    = FALSE;
+  if (isModern)
+  {
+    // flags
+    unsigned char flags = getByte(userPtr);
+    hasBlockChecksum   = flags & 16;
+    hasContentSize     = flags &  8;
+    hasContentChecksum = flags &  4;
+    hasDictionaryID    = flags &  1;
+
+    // only version 1 file format
+    unsigned char version = flags >> 6;
+    if (version != 1)
+      unlz4error("only LZ4 file format version 1 supported");
+
+    // ignore blocksize
+    char numIgnore = 1;
+
+    // ignore, skip 8 bytes
+    if (hasContentSize)
+      numIgnore += 8;
+    // ignore, skip 4 bytes
+    if (hasDictionaryID)
+      numIgnore += 4;
+
+    // ignore header checksum (xxhash32 of everything up this point & 0xFF)
+    numIgnore++;
+
+    // skip all those ignored bytes
+    while (numIgnore--)
+      getByte(userPtr);
+  }
+
+  // don't lower this value, backreferences can be 64kb far away
+#define HISTORY_SIZE 64*1024
+  // contains the latest decoded data
+  unsigned char history[HISTORY_SIZE];
+  // next free position in history[]
+  unsigned int  pos = 0;
+
+  // dictionary compression is a recently introduced feature, just move its contents to the buffer
+  if (dictionary != NULL)
+  {
+    // open dictionary
+    FILE* dict = fopen(dictionary, "rb");
+    if (!dict)
+      unlz4error("cannot open dictionary");
+
+    // get dictionary's filesize
+    fseek(dict, 0, SEEK_END);
+    long dictSize = ftell(dict);
+    // only the last 64k are relevant
+    long relevant = dictSize < 65536 ? 0 : dictSize - 65536;
+    fseek(dict, relevant, SEEK_SET);
+    if (dictSize > 65536)
+      dictSize = 65536;
+    // read it and store it at the end of the buffer
+    fread(history + HISTORY_SIZE - dictSize, 1, dictSize, dict);
+    fclose(dict);
+  }
+
+  // parse all blocks until blockSize == 0
+  while (1)
+  {
+    // block size
+    unsigned int blockSize = getByte(userPtr);
+    blockSize |= (unsigned int)getByte(userPtr) <<  8;
+    blockSize |= (unsigned int)getByte(userPtr) << 16;
+    blockSize |= (unsigned int)getByte(userPtr) << 24;
+
+    // highest bit set ?
+    unsigned char isCompressed = isLegacy || (blockSize & 0x80000000) == 0;
+    if (isModern)
+      blockSize &= 0x7FFFFFFF;
+
+    // stop after last block
+    if (blockSize == 0)
+      break;
+
+    if (isCompressed)
+    {
+      // decompress block
+      unsigned int blockOffset = 0;
+      unsigned int numWritten  = 0;
+      while (blockOffset < blockSize)
+      {
+        // get a token
+        unsigned char token = getByte(userPtr);
+        blockOffset++;
+
+        // determine number of literals
+        unsigned int numLiterals = token >> 4;
+        if (numLiterals == 15)
+        {
+          // number of literals length encoded in more than 1 byte
+          unsigned char current;
+          do
+          {
+            current = getByte(userPtr);
+            numLiterals += current;
+            blockOffset++;
+          } while (current == 255);
+        }
+
+        blockOffset += numLiterals;
+
+        // copy all those literals
+        if (pos + numLiterals < HISTORY_SIZE)
+        {
+          // fast loop
+          while (numLiterals-- > 0)
+            history[pos++] = getByte(userPtr);
+        }
+        else
+        {
+          // slow loop
+          while (numLiterals-- > 0)
+          {
+            history[pos++] = getByte(userPtr);
+
+            // flush output buffer
+            if (pos == HISTORY_SIZE)
+            {
+              sendBytes(history, HISTORY_SIZE, userPtr);
+              numWritten += HISTORY_SIZE;
+              pos = 0;
+            }
+          }
+        }
+
+        // last token has only literals
+        if (blockOffset == blockSize)
+          break;
+
+        // match distance is encoded in two bytes (little endian)
+        unsigned int delta = getByte(userPtr);
+        delta |= (unsigned int)getByte(userPtr) << 8;
+        // zero isn't allowed
+        if (delta == 0)
+          unlz4error("invalid offset");
+        blockOffset += 2;
+
+        // match length (always >= 4, therefore length is stored minus 4)
+        unsigned int matchLength = 4 + (token & 0x0F);
+        if (matchLength == 4 + 0x0F)
+        {
+          unsigned char current;
+          do // match length encoded in more than 1 byte
+          {
+            current = getByte(userPtr);
+            matchLength += current;
+            blockOffset++;
+          } while (current == 255);
+        }
+
+        // copy match
+        unsigned int referencePos = (pos >= delta) ? (pos - delta) : (HISTORY_SIZE + pos - delta);
+        // start and end within the current 64k block ?
+        if (pos + matchLength < HISTORY_SIZE && referencePos + matchLength < HISTORY_SIZE)
+        {
+          // read/write continuous block (no wrap-around at the end of history[])
+          // fast copy
+          if (pos >= referencePos + matchLength || referencePos >= pos + matchLength)
+          {
+            // non-overlapping
+            memcpy(history + pos, history + referencePos, matchLength);
+            pos += matchLength;
+          }
+          else
+          {
+            // overlapping, slower byte-wise copy
+            while (matchLength-- > 0)
+              history[pos++] = history[referencePos++];
+          }
+        }
+        else
+        {
+          // either read or write wraps around at the end of history[]
+          while (matchLength-- > 0)
+          {
+            // copy single byte
+            history[pos++] = history[referencePos++];
+
+            // cannot write anymore ? => wrap around
+            if (pos == HISTORY_SIZE)
+            {
+              // flush output buffer
+              sendBytes(history, HISTORY_SIZE, userPtr);
+              numWritten += HISTORY_SIZE;
+              pos = 0;
+            }
+            // wrap-around of read location
+            referencePos %= HISTORY_SIZE;
+          }
+        }
+      }
+
+      // all legacy blocks must be completely filled - except for the last one
+      if (isLegacy && numWritten + pos < 8*1024*1024)
+        break;
+    }
+    else
+    {
+      // copy uncompressed data and add to history, too (if next block is compressed and some matches refer to this block)
+      while (blockSize-- > 0)
+      {
+        // copy a byte ...
+        history[pos++] = getByte(userPtr);
+        // ... until buffer is full => send to output
+        if (pos == HISTORY_SIZE)
+        {
+          sendBytes(history, HISTORY_SIZE, userPtr);
+          pos = 0;
+        }
+      }
+    }
+
+    if (hasBlockChecksum)
+    {
+      // ignore checksum, skip 4 bytes
+      getByte(userPtr); getByte(userPtr); getByte(userPtr); getByte(userPtr);
+    }
+  }
+
+  if (hasContentChecksum)
+  {
+    // ignore checksum, skip 4 bytes
+    getByte(userPtr); getByte(userPtr); getByte(userPtr); getByte(userPtr);
+  }
+
+  // flush output buffer
+  sendBytes(history, pos, userPtr);
+}
+
+/// old interface where getByte and sendBytes use global file handles
+void unlz4(GET_BYTE getByte, SEND_BYTES sendBytes, const char* dictionary)
+{
+  unlz4_userPtr(getByte, sendBytes, dictionary, NULL);
+}
+
+
+// ==================== COMMAND-LINE HANDLING ====================
+
+
+/// parse command-line
+int main(int argc, const char* argv[])
+{
+  // default input/output streams
+  struct UserPtr user =
+  {
+    .in        = stdin,
+    .out       = stdout,
+    .pos       = 0, // initial input buffer is empty
+    .available = 0
+  };
+
+  const char* dictionary = NULL;
+
+  // first command-line parameter is our input filename / but ignore "-" which stands for STDIN
+  int parameter;
+  for (parameter = 1; parameter < argc; parameter++)
+  {
+    const char* current = argv[parameter];
+    // dictionary
+    if (current[0] == '-' && current[1] == 'D')
+    {
+      if (parameter + 1 >= argc)
+        unlz4error("no dictionary filename found");
+      dictionary = argv[++parameter];
+      continue;
+    }
+
+    // filename
+    // read from STDIN, default behavior
+    if (current[0] != '-' && current[1] != '\0')
+    {
+      // already have a filename - at most one filename is allowed (except for dictionary) ?
+      if (user.in != stdin)
+        unlz4error("can only decompress one file at a time");
+      // get handle
+      user.in = fopen(argv[1], "rb");
+      if (!user.in)
+        unlz4error("file not found");
+    }
+  }
+
+  // and go !
+  unlz4_userPtr(getByteFromIn, sendBytesToOut, dictionary, &user);
+  return 0;
+}

SQUASHFS/build.txt

+Build 32&64 unsquashfs tool with gzip/xz/lzma/lz4/lzo/zstd format
+
+======== zlib ===============
+yum install zlib zlib-static
+
+======== liblzma ============
+github liblzma-master
+./configure --prefix=xxx --disable-xz --disable-xzdec --disable-lzmadec --disable-lzmainfo --enable-small
+make && make install
+
+======== squashfs ========
+squashfs4.4.tar.gz
+do some modify:
+1. delete -lm and implement log10 
+2. static link zlib/liblzma
+3. make unsquashfs
+
+
+========= Build for aarch64 the same steps but in a arm64 machine =============