// Copyright (c) 2021, NVIDIA CORPORATION & AFFILIATES.  All rights reserved.
//
// NVIDIA CORPORATION and its licensors retain all intellectual property
// and proprietary rights in and to this software, related documentation
// and any modifications thereto.  Any use, reproduction, disclosure or
// distribution of this software and related documentation without an express
// license agreement from NVIDIA CORPORATION is strictly prohibited.
#include <c10/util/Half.h>
#include <cuda_runtime.h>
#include <torch/types.h>

#include <cstdint>

#include "pytorch_cuda_helper.hpp"
#include "pytorch_device_registry.hpp"

//------------------------------------------------------------------------
// CUDA kernel parameters.

struct filtered_lrelu_kernel_params {
  // These parameters decide which kernel to use.
  int up;        // upsampling ratio (1, 2, 4)
  int down;      // downsampling ratio (1, 2, 4)
  int2 fuShape;  // [size, 1] | [size, size]
  int2 fdShape;  // [size, 1] | [size, size]

  int _dummy;  // Alignment.

  // Rest of the parameters.
  const void *x;     // Input tensor.
  void *y;           // Output tensor.
  const void *b;     // Bias tensor.
  unsigned char *s;  // Sign tensor in/out. NULL if unused.
  const float *fu;   // Upsampling filter.
  const float *fd;   // Downsampling filter.

  int2 pad0;    // Left/top padding.
  float gain;   // Additional gain factor.
  float slope;  // Leaky ReLU slope on negative side.
  float clamp;  // Clamp after nonlinearity.
  int flip;     // Filter kernel flip for gradient computation.

  int tilesXdim;  // Original number of horizontal output tiles.
  int tilesXrep;  // Number of horizontal tiles per CTA.
  int blockZofs;  // Block z offset to support large minibatch, channel
                  // dimensions.

  int4 xShape;  // [width, height, channel, batch]
  int4 yShape;  // [width, height, channel, batch]
  int2 sShape;  // [width, height] - width is in bytes. Contiguous. Zeros if
                // unused.
  int2 sOfs;  // [ofs_x, ofs_y] - offset between upsampled data and sign tensor.
  int swLimit;  // Active width of sign tensor in bytes.

  longlong4 xStride;   // Strides of all tensors except signs, same component
                       // order as shapes.
  longlong4 yStride;   //
  int64_t bStride;     //
  longlong3 fuStride;  //
  longlong3 fdStride;  //
};

struct filtered_lrelu_act_kernel_params {
  void *x;           // Input/output, modified in-place.
  unsigned char *s;  // Sign tensor in/out. NULL if unused.

  float gain;   // Additional gain factor.
  float slope;  // Leaky ReLU slope on negative side.
  float clamp;  // Clamp after nonlinearity.

  int4 xShape;        // [width, height, channel, batch]
  longlong4 xStride;  // Input/output tensor strides, same order as in shape.
  int2 sShape;  // [width, height] - width is in elements. Contiguous. Zeros if
                // unused.
  int2 sOfs;  // [ofs_x, ofs_y] - offset between upsampled data and sign tensor.
};

//------------------------------------------------------------------------
// CUDA kernel specialization.

struct filtered_lrelu_kernel_spec {
  void *setup;   // Function for filter kernel setup.
  void *exec;    // Function for main operation.
  int2 tileOut;  // Width/height of launch tile.
  int numWarps;  // Number of warps per thread block, determines launch block
                 // size.
  int xrep;      // For processing multiple horizontal tiles per thread block.
  int dynamicSharedKB;  // How much dynamic shared memory the exec kernel wants.
};

//------------------------------------------------------------------------
// CUDA kernel selection.

template <class T, class index_t, bool signWrite, bool signRead>
filtered_lrelu_kernel_spec choose_filtered_lrelu_kernel(
    const filtered_lrelu_kernel_params &p, int sharedKB);
template <class T, bool signWrite, bool signRead>
void *choose_filtered_lrelu_act_kernel(void);

//------------------------------------------------------------------------
// Helpers.

enum              // Filter modes.
{ MODE_SUSD = 0,  // Separable upsampling, separable downsampling.
  MODE_FUSD = 1,  // Full upsampling, separable downsampling.
  MODE_SUFD = 2,  // Separable upsampling, full downsampling.
  MODE_FUFD = 3,  // Full upsampling, full downsampling.
};

template <class T>
struct InternalType;
template <>
struct InternalType<double> {
  typedef double scalar_t;
  typedef double2 vec2_t;
  typedef double4 vec4_t;
  __device__ __forceinline__ static vec2_t zero_vec2(void) {
    return make_double2(0, 0);
  }
  __device__ __forceinline__ static vec4_t zero_vec4(void) {
    return make_double4(0, 0, 0, 0);
  }
  __device__ __forceinline__ static double clamp(double x, double c) {
    return fmin(fmax(x, -c), c);
  }
};
template <>
struct InternalType<float> {
  typedef float scalar_t;
  typedef float2 vec2_t;
  typedef float4 vec4_t;
  __device__ __forceinline__ static vec2_t zero_vec2(void) {
    return make_float2(0, 0);
  }
  __device__ __forceinline__ static vec4_t zero_vec4(void) {
    return make_float4(0, 0, 0, 0);
  }
  __device__ __forceinline__ static float clamp(float x, float c) {
    return fminf(fmaxf(x, -c), c);
  }
};
template <>
struct InternalType<c10::Half> {
  typedef float scalar_t;
  typedef float2 vec2_t;
  typedef float4 vec4_t;
  __device__ __forceinline__ static vec2_t zero_vec2(void) {
    return make_float2(0, 0);
  }
  __device__ __forceinline__ static vec4_t zero_vec4(void) {
    return make_float4(0, 0, 0, 0);
  }
  __device__ __forceinline__ static float clamp(float x, float c) {
    return fminf(fmaxf(x, -c), c);
  }
};

#define MIN(A, B) ((A) < (B) ? (A) : (B))
#define MAX(A, B) ((A) > (B) ? (A) : (B))
#define CEIL_DIV(A, B)                                   \
  (((B) == 1)                                            \
       ? (A)                                             \
       : ((B) == 2) ? ((int)((A) + 1) >> 1)              \
                    : ((B) == 4) ? ((int)((A) + 3) >> 2) \
                                 : (((A) + ((A) > 0 ? (B)-1 : 0)) / (B)))

// This works only up to blocks of size 256 x 256 and for all N that are powers
// of two.
template <int N>
__device__ __forceinline__ void fast_div_mod(int &x, int &y, unsigned int i) {
  if ((N & (N - 1)) && N <= 256)
    y = (i * ((1 << 24) / N + 1)) >> 24;  // Assumes N <= 256, i < N*256.
  else
    y = i / N;

  x = i - y * N;
}

// Type cast stride before reading it.
template <class T>
__device__ __forceinline__ T get_stride(const int64_t &x) {
  return *reinterpret_cast<const T *>(&x);
}

//------------------------------------------------------------------------
// Filters, setup kernel, copying function.

#define MAX_FILTER_SIZE 32

// Combined up/down filter buffers so that transfer can be done with one copy.
__device__ float
    g_fbuf[2 * MAX_FILTER_SIZE * MAX_FILTER_SIZE];  // Filters in global memory,
                                                    // written by setup kernel.
__device__ __constant__ float
    c_fbuf[2 * MAX_FILTER_SIZE *
           MAX_FILTER_SIZE];  // Filters in constant memory, read by main
                              // kernel.

// Accessors to combined buffers to index up/down filters individually.
#define c_fu (c_fbuf)
#define c_fd (c_fbuf + MAX_FILTER_SIZE * MAX_FILTER_SIZE)
#define g_fu (g_fbuf)
#define g_fd (g_fbuf + MAX_FILTER_SIZE * MAX_FILTER_SIZE)

// Set up filters into global memory buffer.
static __global__ void setup_filters_kernel(filtered_lrelu_kernel_params p) {
  for (int idx = threadIdx.x; idx < MAX_FILTER_SIZE * MAX_FILTER_SIZE;
       idx += blockDim.x) {
    int x, y;
    fast_div_mod<MAX_FILTER_SIZE>(x, y, idx);

    int fu_x = p.flip ? x : (p.fuShape.x - 1 - x);
    int fu_y = p.flip ? y : (p.fuShape.y - 1 - y);
    if (p.fuShape.y > 0)
      g_fu[idx] = (x >= p.fuShape.x || y >= p.fuShape.y)
                      ? 0.0f
                      : p.fu[fu_x * p.fuStride.x + fu_y * p.fuStride.y];
    else
      g_fu[idx] =
          (x >= p.fuShape.x || y > 0) ? 0.0f : p.fu[fu_x * p.fuStride.x];

    int fd_x = p.flip ? x : (p.fdShape.x - 1 - x);
    int fd_y = p.flip ? y : (p.fdShape.y - 1 - y);
    if (p.fdShape.y > 0)
      g_fd[idx] = (x >= p.fdShape.x || y >= p.fdShape.y)
                      ? 0.0f
                      : p.fd[fd_x * p.fdStride.x + fd_y * p.fdStride.y];
    else
      g_fd[idx] =
          (x >= p.fdShape.x || y > 0) ? 0.0f : p.fd[fd_x * p.fdStride.x];
  }
}

// Host function to copy filters written by setup kernel into constant buffer
// for main kernel.
static cudaError_t copy_filters(cudaStream_t stream) {
  void *src = 0;
  cudaError_t err = cudaGetSymbolAddress(&src, g_fbuf);
  if (err) return err;
  return cudaMemcpyToSymbolAsync(
      c_fbuf, src, 2 * MAX_FILTER_SIZE * MAX_FILTER_SIZE * sizeof(float), 0,
      cudaMemcpyDeviceToDevice, stream);
}

//------------------------------------------------------------------------
// Coordinate spaces:
// - Relative to input tensor:      inX, inY, tileInX, tileInY
// - Relative to input tile:        relInX, relInY, tileInW, tileInH
// - Relative to upsampled tile:    relUpX, relUpY, tileUpW, tileUpH
// - Relative to output tile:       relOutX, relOutY, tileOutW, tileOutH
// - Relative to output tensor:     outX, outY, tileOutX, tileOutY
//
// Relationships between coordinate spaces:
// - inX = tileInX + relInX
// - inY = tileInY + relInY
// - relUpX = relInX * up + phaseInX
// - relUpY = relInY * up + phaseInY
// - relUpX = relOutX * down
// - relUpY = relOutY * down
// - outX = tileOutX + relOutX
// - outY = tileOutY + relOutY

extern __shared__ char
    s_buf_raw[];  // When sharedKB <= 48, allocate shared memory statically
                  // inside the kernel, otherwise use the externally allocated
                  // shared memory buffer.

template <class T, class index_t, int sharedKB, bool signWrite, bool signRead,
          int filterMode, int up, int fuSize, int down, int fdSize,
          int tileOutW, int tileOutH, int threadsPerBlock, bool enableXrep,
          bool enableWriteSkip>
static __global__ void filtered_lrelu_kernel(filtered_lrelu_kernel_params p) {
  // Check that we don't try to support non-existing filter modes.
  static_assert(up == 1 || up == 2 || up == 4,
                "only up=1, up=2, up=4 scales supported");
  static_assert(down == 1 || down == 2 || down == 4,
                "only down=1, down=2, down=4 scales supported");
  static_assert(fuSize >= up,
                "upsampling filter size must be at least upsampling factor");
  static_assert(
      fdSize >= down,
      "downsampling filter size must be at least downsampling factor");
  static_assert(
      fuSize % up == 0,
      "upsampling filter size must be divisible with upsampling factor");
  static_assert(
      fdSize % down == 0,
      "downsampling filter size must be divisible with downsampling factor");
  static_assert(fuSize <= MAX_FILTER_SIZE && fdSize <= MAX_FILTER_SIZE,
                "filter size greater than MAX_FILTER_SIZE");
  static_assert(up != 1 || (fuSize == 1 && (filterMode == MODE_FUFD ||
                                            filterMode == MODE_FUSD)),
                "up=1 supported only for 1x1 full filters");
  static_assert(down != 1 || (fdSize == 1 && (filterMode == MODE_FUFD ||
                                              filterMode == MODE_SUFD)),
                "down=1 supported only for 1x1 full filters");
  static_assert(
      !(up == 4 && (filterMode == MODE_FUFD || filterMode == MODE_FUSD)),
      "full filters not supported for up=4");
  static_assert(
      !(down == 4 && (filterMode == MODE_FUFD || filterMode == MODE_SUFD)),
      "full filters not supported for down=4");

  // Static definitions.
  typedef typename InternalType<T>::scalar_t scalar_t;
  typedef typename InternalType<T>::vec2_t vec2_t;
  typedef typename InternalType<T>::vec4_t vec4_t;
  const int tileUpW = (tileOutW * down + (fdSize - 1) - (down - 1) + 3) &
                      ~3;  // Upsampled tile width, rounded up to multiple of 4.
  const int tileUpH =
      tileOutH * down + (fdSize - 1) - (down - 1);  // Upsampled tile height.
  const int tileInW =
      CEIL_DIV(tileUpW + (fuSize - 1), up);  // Input tile width.
  const int tileInH =
      CEIL_DIV(tileUpH + (fuSize - 1), up);  // Input tile height.
  const int tileUpH_up =
      CEIL_DIV(tileUpH, up) *
      up;  // Upsampled tile height rounded up to a multiple of up.
  const int tileInH_up =
      CEIL_DIV(tileUpH_up + (fuSize - 1),
               up);  // For allocations only, to avoid shared memory read
                     // overruns with up=2 and up=4.

  // Merge 1x1 downsampling into last upsampling step for upf1 and ups2.
  const bool downInline =
      (down == 1) && ((up == 1 && filterMode == MODE_FUFD) ||
                      (up == 2 && filterMode == MODE_SUFD));

  // Sizes of logical buffers.
  const int szIn = tileInH_up * tileInW;
  const int szUpX = tileInH_up * tileUpW;
  const int szUpXY = downInline ? 0 : (tileUpH * tileUpW);
  const int szDownX = tileUpH * tileOutW;

  // Sizes for shared memory arrays.
  const int s_buf0_size_base =
      (filterMode == MODE_SUSD)
          ? MAX(szIn, szUpXY)
          : (filterMode == MODE_FUSD)
                ? MAX(szIn, szDownX)
                : (filterMode == MODE_SUFD)
                      ? MAX(szIn, szUpXY)
                      : (filterMode == MODE_FUFD) ? szIn : -1;
  const int s_buf1_size_base =
      (filterMode == MODE_SUSD)
          ? MAX(szUpX, szDownX)
          : (filterMode == MODE_FUSD)
                ? szUpXY
                : (filterMode == MODE_SUFD)
                      ? szUpX
                      : (filterMode == MODE_FUFD) ? szUpXY : -1;

  // Ensure U128 alignment.
  const int s_buf0_size = (s_buf0_size_base + 3) & ~3;
  const int s_buf1_size = (s_buf1_size_base + 3) & ~3;

  // Check at compile time that we don't use too much shared memory.
  static_assert(
      (s_buf0_size + s_buf1_size) * sizeof(scalar_t) <= (sharedKB << 10),
      "shared memory overflow");

  // Declare shared memory arrays.
  scalar_t *s_buf0;
  scalar_t *s_buf1;
  if (sharedKB <= 48) {
    // Allocate shared memory arrays here.
    __shared__ scalar_t
        s_buf0_st[(sharedKB > 48)
                      ? (1 << 24)
                      : (s_buf0_size +
                         s_buf1_size)];  // Prevent launching if this isn't
                                         // optimized away when unused.
    s_buf0 = s_buf0_st;
    s_buf1 = s_buf0 + s_buf0_size;
  } else {
    // Use the dynamically allocated shared memory array.
    s_buf0 = (scalar_t *)s_buf_raw;
    s_buf1 = s_buf0 + s_buf0_size;
  }

  // Pointers to the buffers.
  scalar_t *
      s_tileIn;  // Input tile:                      [relInX * tileInH + relInY]
  scalar_t *s_tileUpX;   // After horizontal upsampling:     [relInY * tileUpW +
                         // relUpX]
  scalar_t *s_tileUpXY;  // After upsampling:                [relUpY * tileUpW +
                         // relUpX]
  scalar_t *s_tileDownX;  // After horizontal downsampling:   [relUpY * tileOutW
                          // + relOutX]
  if (filterMode == MODE_SUSD) {
    s_tileIn = s_buf0;
    s_tileUpX = s_buf1;
    s_tileUpXY = s_buf0;
    s_tileDownX = s_buf1;
  } else if (filterMode == MODE_FUSD) {
    s_tileIn = s_buf0;
    s_tileUpXY = s_buf1;
    s_tileDownX = s_buf0;
  } else if (filterMode == MODE_SUFD) {
    s_tileIn = s_buf0;
    s_tileUpX = s_buf1;
    s_tileUpXY = s_buf0;
  } else if (filterMode == MODE_FUFD) {
    s_tileIn = s_buf0;
    s_tileUpXY = s_buf1;
  }

  // Allow large grids in z direction via per-launch offset.
  int channelIdx = blockIdx.z + p.blockZofs;
  int batchIdx = channelIdx / p.yShape.z;
  channelIdx -= batchIdx * p.yShape.z;

  // Offset to output feature map. In bytes.
  index_t mapOfsOut = channelIdx * get_stride<index_t>(p.yStride.z) +
                      batchIdx * get_stride<index_t>(p.yStride.w);

  // Sign shift amount.
  uint32_t signXo = ((threadIdx.x + p.sOfs.x) << 1) & 6;

// Inner tile loop.
#pragma unroll 1
  for (int tileIdx = 0;
       !enableXrep ||
       (tileIdx < MIN(p.tilesXrep, p.tilesXdim - p.tilesXrep * blockIdx.y));
       tileIdx++) {
    // Locate output tile.
    int tileX = enableXrep ? blockIdx.y * p.tilesXrep + tileIdx : blockIdx.x;
    int tileOutX = tileX * tileOutW;
    int tileOutY = (enableXrep ? blockIdx.x : blockIdx.y) * tileOutH;

    // Locate input tile.
    int tmpX = tileOutX * down - p.pad0.x;
    int tmpY = tileOutY * down - p.pad0.y;
    int tileInX = CEIL_DIV(tmpX, up);
    int tileInY = CEIL_DIV(tmpY, up);
    const int phaseInX = tileInX * up - tmpX;
    const int phaseInY = tileInY * up - tmpY;

    // Extra sync if input and output buffers are the same and we are not on
    // first tile.
    if (enableXrep && tileIdx > 0 &&
        (filterMode == MODE_FUSD || (filterMode == MODE_SUFD && !downInline) ||
         (filterMode == MODE_FUFD && downInline)))
      __syncthreads();

    // Load input tile & apply bias. Unrolled.
    scalar_t b =
        (scalar_t) * (const T *)((const char *)p.b +
                                 (channelIdx * get_stride<index_t>(p.bStride)));
    index_t mapOfsIn = channelIdx * get_stride<index_t>(p.xStride.z) +
                       batchIdx * get_stride<index_t>(p.xStride.w);
    int idx = threadIdx.x;
    const int loopCountIN = CEIL_DIV(tileInW * tileInH, threadsPerBlock);
#pragma unroll
    for (int loop = 0; loop < loopCountIN; loop++) {
      int relInX, relInY;
      fast_div_mod<tileInW>(relInX, relInY, idx);
      int inX = tileInX + relInX;
      int inY = tileInY + relInY;
      scalar_t v = 0;

      if ((uint32_t)inX < p.xShape.x && (uint32_t)inY < p.xShape.y)
        v = (scalar_t) * ((const T *)((const char *)p.x +
                                      (inX * get_stride<index_t>(p.xStride.x) +
                                       inY * get_stride<index_t>(p.xStride.y) +
                                       mapOfsIn))) +
            b;

      bool skip = (loop == loopCountIN - 1) && (idx >= tileInW * tileInH);
      if (!skip) s_tileIn[idx] = v;

      idx += threadsPerBlock;
    }

    if (filterMode == MODE_SUSD ||
        filterMode == MODE_SUFD)  // Separable upsampling filter.
    {
      // Horizontal upsampling.
      __syncthreads();
      if (up == 4) {
        for (int idx = threadIdx.x * up; idx < tileUpW * tileInH;
             idx += blockDim.x * up) {
          int relUpX0, relInY;
          fast_div_mod<tileUpW>(relUpX0, relInY, idx);
          int relInX0 = relUpX0 / up;
          int src0 = relInX0 + tileInW * relInY;
          int dst = relInY * tileUpW + relUpX0;
          vec4_t v = InternalType<T>::zero_vec4();
          scalar_t a = s_tileIn[src0];
          if (phaseInX == 0) {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileIn[src0 + step + 1];
              v.y += a * (scalar_t)c_fu[step * up + 3];
              v.z += a * (scalar_t)c_fu[step * up + 2];
              v.w += a * (scalar_t)c_fu[step * up + 1];
            }
          } else if (phaseInX == 1) {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 1];
              v.y += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileIn[src0 + step + 1];
              v.z += a * (scalar_t)c_fu[step * up + 3];
              v.w += a * (scalar_t)c_fu[step * up + 2];
            }
          } else if (phaseInX == 2) {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 2];
              v.y += a * (scalar_t)c_fu[step * up + 1];
              v.z += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileIn[src0 + step + 1];
              v.w += a * (scalar_t)c_fu[step * up + 3];
            }
          } else  // (phaseInX == 3)
          {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 3];
              v.y += a * (scalar_t)c_fu[step * up + 2];
              v.z += a * (scalar_t)c_fu[step * up + 1];
              v.w += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileIn[src0 + step + 1];
            }
          }
          s_tileUpX[dst + 0] = v.x;
          s_tileUpX[dst + 1] = v.y;
          s_tileUpX[dst + 2] = v.z;
          s_tileUpX[dst + 3] = v.w;
        }
      } else if (up == 2) {
        bool p0 = (phaseInX == 0);
        for (int idx = threadIdx.x * up; idx < tileUpW * tileInH;
             idx += blockDim.x * up) {
          int relUpX0, relInY;
          fast_div_mod<tileUpW>(relUpX0, relInY, idx);
          int relInX0 = relUpX0 / up;
          int src0 = relInX0 + tileInW * relInY;
          int dst = relInY * tileUpW + relUpX0;
          vec2_t v = InternalType<T>::zero_vec2();
          scalar_t a = s_tileIn[src0];
          if (p0)  // (phaseInX == 0)
          {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileIn[src0 + step + 1];
              v.y += a * (scalar_t)c_fu[step * up + 1];
            }
          } else  // (phaseInX == 1)
          {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 1];
              v.y += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileIn[src0 + step + 1];
            }
          }
          s_tileUpX[dst + 0] = v.x;
          s_tileUpX[dst + 1] = v.y;
        }
      }

      // Vertical upsampling & nonlinearity.

      __syncthreads();
      int groupMask = 15 << ((threadIdx.x & 31) & ~3);
      int minY = tileOutY ? (tileOutY - tileOutH) * down + tileUpH
                          : 0;  // Skip already written signs.
      int sShapeMaxY =
          MIN(p.sShape.y,
              tileOutY * down + tileUpH);  // Avoid out-of-tile sign writes.
      if (up == 4) {
        minY -= 3;  // Adjust according to block height.
        for (int idx = threadIdx.x; idx < tileUpW * tileUpH_up / up;
             idx += blockDim.x) {
          int relUpX, relInY0;
          fast_div_mod<tileUpW>(relUpX, relInY0, idx);
          int relUpY0 = relInY0 * up;
          int src0 = relInY0 * tileUpW + relUpX;
          int dst = relUpY0 * tileUpW + relUpX;
          vec4_t v = InternalType<T>::zero_vec4();

          scalar_t a = s_tileUpX[src0];
          if (phaseInY == 0) {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileUpX[src0 + (step + 1) * tileUpW];
              v.y += a * (scalar_t)c_fu[step * up + 3];
              v.z += a * (scalar_t)c_fu[step * up + 2];
              v.w += a * (scalar_t)c_fu[step * up + 1];
            }
          } else if (phaseInY == 1) {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 1];
              v.y += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileUpX[src0 + (step + 1) * tileUpW];
              v.z += a * (scalar_t)c_fu[step * up + 3];
              v.w += a * (scalar_t)c_fu[step * up + 2];
            }
          } else if (phaseInY == 2) {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 2];
              v.y += a * (scalar_t)c_fu[step * up + 1];
              v.z += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileUpX[src0 + (step + 1) * tileUpW];
              v.w += a * (scalar_t)c_fu[step * up + 3];
            }
          } else  // (phaseInY == 3)
          {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 3];
              v.y += a * (scalar_t)c_fu[step * up + 2];
              v.z += a * (scalar_t)c_fu[step * up + 1];
              v.w += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileUpX[src0 + (step + 1) * tileUpW];
            }
          }

          int x = tileOutX * down + relUpX;
          int y = tileOutY * down + relUpY0;
          int signX = x + p.sOfs.x;
          int signY = y + p.sOfs.y;
          int signZ = blockIdx.z + p.blockZofs;
          int signXb = signX >> 2;
          index_t si0 =
              signXb + p.sShape.x * (signY + (index_t)p.sShape.y * signZ);
          index_t si1 = si0 + p.sShape.x;
          index_t si2 = si0 + p.sShape.x * 2;
          index_t si3 = si0 + p.sShape.x * 3;

          v.x *= (scalar_t)((float)up * (float)up * p.gain);
          v.y *= (scalar_t)((float)up * (float)up * p.gain);
          v.z *= (scalar_t)((float)up * (float)up * p.gain);
          v.w *= (scalar_t)((float)up * (float)up * p.gain);

          if (signWrite) {
            if (!enableWriteSkip) {
              // Determine and write signs.
              int sx = __float_as_uint(v.x) >> 31 << 0;
              int sy = __float_as_uint(v.y) >> 31 << 8;
              int sz = __float_as_uint(v.z) >> 31 << 16;
              int sw = __float_as_uint(v.w) >> 31 << 24;
              if (sx) v.x *= p.slope;
              if (sy) v.y *= p.slope;
              if (sz) v.z *= p.slope;
              if (sw) v.w *= p.slope;
              if (fabsf(v.x) > p.clamp) {
                sx = 2 << 0;
                v.x = InternalType<T>::clamp(v.x, p.clamp);
              }
              if (fabsf(v.y) > p.clamp) {
                sy = 2 << 8;
                v.y = InternalType<T>::clamp(v.y, p.clamp);
              }
              if (fabsf(v.z) > p.clamp) {
                sz = 2 << 16;
                v.z = InternalType<T>::clamp(v.z, p.clamp);
              }
              if (fabsf(v.w) > p.clamp) {
                sw = 2 << 24;
                v.w = InternalType<T>::clamp(v.w, p.clamp);
              }

              if ((uint32_t)signXb < p.swLimit && signY >= minY) {
                // Combine signs.
                uint32_t s = sx + sy + sw + sz;
                s <<= (signX & 3) << 1;
#ifndef MMCV_WITH_HIP
                s |= __shfl_xor_sync(groupMask, s, 1);
                s |= __shfl_xor_sync(groupMask, s, 2);
#else
                s |= __shfl_xor(s, 1);
                s |= __shfl_xor(s, 2);
#endif

                // Write signs.
                if ((uint32_t)(signY + 0) < sShapeMaxY) {
                  p.s[si0] = (unsigned char)(s >> 0);
                }
                if ((uint32_t)(signY + 1) < sShapeMaxY) {
                  p.s[si1] = (unsigned char)(s >> 8);
                }
                if ((uint32_t)(signY + 2) < sShapeMaxY) {
                  p.s[si2] = (unsigned char)(s >> 16);
                }
                if ((uint32_t)(signY + 3) < sShapeMaxY) {
                  p.s[si3] = (unsigned char)(s >> 24);
                }
              }
            } else {
              // Determine and write signs.
              if ((uint32_t)signXb < p.swLimit && signY >= minY) {
                int sx = __float_as_uint(v.x) >> 31 << 0;
                int sy = __float_as_uint(v.y) >> 31 << 8;
                int sz = __float_as_uint(v.z) >> 31 << 16;
                int sw = __float_as_uint(v.w) >> 31 << 24;
                if (sx) v.x *= p.slope;
                if (sy) v.y *= p.slope;
                if (sz) v.z *= p.slope;
                if (sw) v.w *= p.slope;
                if (fabsf(v.x) > p.clamp) {
                  sx = 2 << 0;
                  v.x = InternalType<T>::clamp(v.x, p.clamp);
                }
                if (fabsf(v.y) > p.clamp) {
                  sy = 2 << 8;
                  v.y = InternalType<T>::clamp(v.y, p.clamp);
                }
                if (fabsf(v.z) > p.clamp) {
                  sz = 2 << 16;
                  v.z = InternalType<T>::clamp(v.z, p.clamp);
                }
                if (fabsf(v.w) > p.clamp) {
                  sw = 2 << 24;
                  v.w = InternalType<T>::clamp(v.w, p.clamp);
                }

                // Combine signs.
                uint32_t s = sx + sy + sw + sz;
                s <<= (signX & 3) << 1;
#ifndef MMCV_WITH_HIP
                s |= __shfl_xor_sync(groupMask, s, 1);
                s |= __shfl_xor_sync(groupMask, s, 2);
#else
                s |= __shfl_xor(s, 1);
                s |= __shfl_xor(s, 2);
#endif
                // Write signs.
                if ((uint32_t)(signY + 0) < sShapeMaxY) {
                  p.s[si0] = (unsigned char)(s >> 0);
                }
                if ((uint32_t)(signY + 1) < sShapeMaxY) {
                  p.s[si1] = (unsigned char)(s >> 8);
                }
                if ((uint32_t)(signY + 2) < sShapeMaxY) {
                  p.s[si2] = (unsigned char)(s >> 16);
                }
                if ((uint32_t)(signY + 3) < sShapeMaxY) {
                  p.s[si3] = (unsigned char)(s >> 24);
                }
              } else {
                // Just compute the values.
                if (v.x < 0.f) v.x *= p.slope;
                v.x = InternalType<T>::clamp(v.x, p.clamp);
                if (v.y < 0.f) v.y *= p.slope;
                v.y = InternalType<T>::clamp(v.y, p.clamp);
                if (v.z < 0.f) v.z *= p.slope;
                v.z = InternalType<T>::clamp(v.z, p.clamp);
                if (v.w < 0.f) v.w *= p.slope;
                v.w = InternalType<T>::clamp(v.w, p.clamp);
              }
            }
          } else if (signRead)  // Read signs and apply.
          {
            if ((uint32_t)signXb < p.swLimit) {
              int ss = (signX & 3) << 1;
              if ((uint32_t)(signY + 0) < p.sShape.y) {
                int s = p.s[si0] >> ss;
                if (s & 1) v.x *= p.slope;
                if (s & 2) v.x = 0.f;
              }
              if ((uint32_t)(signY + 1) < p.sShape.y) {
                int s = p.s[si1] >> ss;
                if (s & 1) v.y *= p.slope;
                if (s & 2) v.y = 0.f;
              }
              if ((uint32_t)(signY + 2) < p.sShape.y) {
                int s = p.s[si2] >> ss;
                if (s & 1) v.z *= p.slope;
                if (s & 2) v.z = 0.f;
              }
              if ((uint32_t)(signY + 3) < p.sShape.y) {
                int s = p.s[si3] >> ss;
                if (s & 1) v.w *= p.slope;
                if (s & 2) v.w = 0.f;
              }
            }
          } else  // Forward pass with no sign write.
          {
            if (v.x < 0.f) v.x *= p.slope;
            v.x = InternalType<T>::clamp(v.x, p.clamp);
            if (v.y < 0.f) v.y *= p.slope;
            v.y = InternalType<T>::clamp(v.y, p.clamp);
            if (v.z < 0.f) v.z *= p.slope;
            v.z = InternalType<T>::clamp(v.z, p.clamp);
            if (v.w < 0.f) v.w *= p.slope;
            v.w = InternalType<T>::clamp(v.w, p.clamp);
          }

          s_tileUpXY[dst + 0 * tileUpW] = v.x;
          if (relUpY0 + 1 < tileUpH) s_tileUpXY[dst + 1 * tileUpW] = v.y;
          if (relUpY0 + 2 < tileUpH) s_tileUpXY[dst + 2 * tileUpW] = v.z;
          if (relUpY0 + 3 < tileUpH) s_tileUpXY[dst + 3 * tileUpW] = v.w;
        }
      } else if (up == 2) {
        minY -= 1;  // Adjust according to block height.
        for (int idx = threadIdx.x; idx < tileUpW * tileUpH_up / up;
             idx += blockDim.x) {
          int relUpX, relInY0;
          fast_div_mod<tileUpW>(relUpX, relInY0, idx);
          int relUpY0 = relInY0 * up;
          int src0 = relInY0 * tileUpW + relUpX;
          int dst = relUpY0 * tileUpW + relUpX;
          vec2_t v = InternalType<T>::zero_vec2();

          scalar_t a = s_tileUpX[src0];
          if (phaseInY == 0) {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileUpX[src0 + (step + 1) * tileUpW];
              v.y += a * (scalar_t)c_fu[step * up + 1];
            }
          } else  // (phaseInY == 1)
          {
#pragma unroll
            for (int step = 0; step < fuSize / up; step++) {
              v.x += a * (scalar_t)c_fu[step * up + 1];
              v.y += a * (scalar_t)c_fu[step * up + 0];
              a = s_tileUpX[src0 + (step + 1) * tileUpW];
            }
          }

          int x = tileOutX * down + relUpX;
          int y = tileOutY * down + relUpY0;
          int signX = x + p.sOfs.x;
          int signY = y + p.sOfs.y;
          int signZ = blockIdx.z + p.blockZofs;
          int signXb = signX >> 2;
          index_t si0 =
              signXb + p.sShape.x * (signY + (index_t)p.sShape.y * signZ);
          index_t si1 = si0 + p.sShape.x;

          v.x *= (scalar_t)((float)up * (float)up * p.gain);
          v.y *= (scalar_t)((float)up * (float)up * p.gain);

          if (signWrite) {
            if (!enableWriteSkip) {
              // Determine and write signs.
              int sx = __float_as_uint(v.x) >> 31 << 0;
              int sy = __float_as_uint(v.y) >> 31 << 8;
              if (sx) v.x *= p.slope;
              if (sy) v.y *= p.slope;
              if (fabsf(v.x) > p.clamp) {
                sx = 2 << 0;
                v.x = InternalType<T>::clamp(v.x, p.clamp);
              }
              if (fabsf(v.y) > p.clamp) {
                sy = 2 << 8;
                v.y = InternalType<T>::clamp(v.y, p.clamp);
              }

              if ((uint32_t)signXb < p.swLimit && signY >= minY) {
                // Combine signs.
                int s = sx + sy;
                s <<= signXo;
#ifndef MMCV_WITH_HIP
                s |= __shfl_xor_sync(groupMask, s, 1);
                s |= __shfl_xor_sync(groupMask, s, 2);
#else
                s |= __shfl_xor(s, 1);
                s |= __shfl_xor(s, 2);
#endif
                // Write signs.
                if ((uint32_t)(signY + 0) < sShapeMaxY) {
                  p.s[si0] = (unsigned char)(s >> 0);
                }
                if ((uint32_t)(signY + 1) < sShapeMaxY) {
                  p.s[si1] = (unsigned char)(s >> 8);
                }
              }
            } else {
              // Determine and write signs.
              if ((uint32_t)signXb < p.swLimit && signY >= minY) {
                int sx = __float_as_uint(v.x) >> 31 << 0;
                int sy = __float_as_uint(v.y) >> 31 << 8;
                if (sx) v.x *= p.slope;
                if (sy) v.y *= p.slope;
                if (fabsf(v.x) > p.clamp) {
                  sx = 2 << 0;
                  v.x = InternalType<T>::clamp(v.x, p.clamp);
                }
                if (fabsf(v.y) > p.clamp) {
                  sy = 2 << 8;
                  v.y = InternalType<T>::clamp(v.y, p.clamp);
                }

                // Combine signs.
                int s = sx + sy;
                s <<= signXo;
#ifndef MMCV_WITH_HIP
                s |= __shfl_xor_sync(groupMask, s, 1);
                s |= __shfl_xor_sync(groupMask, s, 2);
#else
                s |= __shfl_xor(s, 1);
                s |= __shfl_xor(s, 2);
#endif
                // Write signs.
                if ((uint32_t)(signY + 0) < sShapeMaxY) {
                  p.s[si0] = (unsigned char)(s >> 0);
                }
                if ((uint32_t)(signY + 1) < sShapeMaxY) {
                  p.s[si1] = (unsigned char)(s >> 8);
                }
              } else {
                // Just compute the values.
                if (v.x < 0.f) v.x *= p.slope;
                v.x = InternalType<T>::clamp(v.x, p.clamp);
                if (v.y < 0.f) v.y *= p.slope;
                v.y = InternalType<T>::clamp(v.y, p.clamp);
              }
            }
          } else if (signRead)  // Read signs and apply.
          {
            if ((uint32_t)signXb < p.swLimit) {
              if ((uint32_t)(signY + 0) < p.sShape.y) {
                int s = p.s[si0] >> signXo;
                if (s & 1) v.x *= p.slope;
                if (s & 2) v.x = 0.f;
              }
              if ((uint32_t)(signY + 1) < p.sShape.y) {
                int s = p.s[si1] >> signXo;
                if (s & 1) v.y *= p.slope;
                if (s & 2) v.y = 0.f;
              }
            }
          } else  // Forward pass with no sign write.
          {
            if (v.x < 0.f) v.x *= p.slope;
            v.x = InternalType<T>::clamp(v.x, p.clamp);
            if (v.y < 0.f) v.y *= p.slope;
            v.y = InternalType<T>::clamp(v.y, p.clamp);
          }

          if (!downInline) {
            // Write into temporary buffer.
            s_tileUpXY[dst] = v.x;
            if (relUpY0 < tileUpH - 1) s_tileUpXY[dst + tileUpW] = v.y;
          } else {
            // Write directly into output buffer.
            if ((uint32_t)x < p.yShape.x) {
              int ymax = MIN(p.yShape.y, tileUpH + tileOutY * down);
              index_t ofs = x * get_stride<index_t>(p.yStride.x) +
                            y * get_stride<index_t>(p.yStride.y) + mapOfsOut;
              if ((uint32_t)y + 0 < p.yShape.y)
                *((T *)((char *)p.y + ofs)) = (T)(v.x * (scalar_t)c_fd[0]);
              if ((uint32_t)y + 1 < ymax)
                *((T *)((char *)p.y + ofs + get_stride<index_t>(p.yStride.y))) =
                    (T)(v.y * (scalar_t)c_fd[0]);
            }
          }
        }
      }
    } else if (filterMode == MODE_FUSD || filterMode == MODE_FUFD) {
      // Full upsampling filter.

      if (up == 2) {
        // 2 x 2-wide.
        __syncthreads();
        int minY = tileOutY ? (tileOutY - tileOutH) * down + tileUpH + p.sOfs.y
                            : 0;  // Skip already written signs.
        for (int idx = threadIdx.x * 4; idx < tileUpW * tileUpH;
             idx += blockDim.x * 4) {
          int relUpX0, relUpY0;
          fast_div_mod<tileUpW>(relUpX0, relUpY0, idx);
          int relInX0 = CEIL_DIV(relUpX0 - phaseInX, up);
          int relInY0 = CEIL_DIV(relUpY0 - phaseInY, up);
          int src0 = relInX0 + tileInW * relInY0;
          int tap0y = (relInY0 * up + phaseInY - relUpY0);

#define X_LOOP(TAPY, PX)                                             \
  for (int sx = 0; sx < fuSize / up; sx++) {                         \
    v.x += a * (scalar_t)c_fu[(sx * up + (((PX)-0) & (up - 1))) +    \
                              (sy * up + (TAPY)) * MAX_FILTER_SIZE]; \
    v.z += b * (scalar_t)c_fu[(sx * up + (((PX)-0) & (up - 1))) +    \
                              (sy * up + (TAPY)) * MAX_FILTER_SIZE]; \
    if ((PX) == 0) {                                                 \
      a = b;                                                         \
      b = s_tileIn[src0 + 2 + sx + sy * tileInW];                    \
    }                                                                \
    v.y += a * (scalar_t)c_fu[(sx * up + (((PX)-1) & (up - 1))) +    \
                              (sy * up + (TAPY)) * MAX_FILTER_SIZE]; \
    v.w += b * (scalar_t)c_fu[(sx * up + (((PX)-1) & (up - 1))) +    \
                              (sy * up + (TAPY)) * MAX_FILTER_SIZE]; \
    if ((PX) == 1) {                                                 \
      a = b;                                                         \
      b = s_tileIn[src0 + 2 + sx + sy * tileInW];                    \
    }                                                                \
  }

          vec4_t v = InternalType<T>::zero_vec4();
          if (tap0y == 0 && phaseInX == 0)
#pragma unroll
            for (int sy = 0; sy < fuSize / up; sy++) {
              scalar_t a = s_tileIn[src0 + sy * tileInW];
              scalar_t b = s_tileIn[src0 + sy * tileInW + 1];
#pragma unroll
              X_LOOP(0, 0)
            }
          if (tap0y == 0 && phaseInX == 1)
#pragma unroll
            for (int sy = 0; sy < fuSize / up; sy++) {
              scalar_t a = s_tileIn[src0 + sy * tileInW];
              scalar_t b = s_tileIn[src0 + sy * tileInW + 1];
#pragma unroll
              X_LOOP(0, 1)
            }
          if (tap0y == 1 && phaseInX == 0)
#pragma unroll
            for (int sy = 0; sy < fuSize / up; sy++) {
              scalar_t a = s_tileIn[src0 + sy * tileInW];
              scalar_t b = s_tileIn[src0 + sy * tileInW + 1];
#pragma unroll
              X_LOOP(1, 0)
            }
          if (tap0y == 1 && phaseInX == 1)
#pragma unroll
            for (int sy = 0; sy < fuSize / up; sy++) {
              scalar_t a = s_tileIn[src0 + sy * tileInW];
              scalar_t b = s_tileIn[src0 + sy * tileInW + 1];
#pragma unroll
              X_LOOP(1, 1)
            }

#undef X_LOOP

          int x = tileOutX * down + relUpX0;
          int y = tileOutY * down + relUpY0;
          int signX = x + p.sOfs.x;
          int signY = y + p.sOfs.y;
          int signZ = blockIdx.z + p.blockZofs;
          int signXb = signX >> 2;
          index_t si =
              signXb + p.sShape.x * (signY + (index_t)p.sShape.y * signZ);

          v.x *= (scalar_t)((float)up * (float)up * p.gain);
          v.y *= (scalar_t)((float)up * (float)up * p.gain);
          v.z *= (scalar_t)((float)up * (float)up * p.gain);
          v.w *= (scalar_t)((float)up * (float)up * p.gain);

          if (signWrite) {
            if (!enableWriteSkip) {
              // Determine and write signs.
              int sx = __float_as_uint(v.x) >> 31;
              int sy = __float_as_uint(v.y) >> 31;
              int sz = __float_as_uint(v.z) >> 31;
              int sw = __float_as_uint(v.w) >> 31;
              if (sx) v.x *= p.slope;
              if (fabsf(v.x) > p.clamp) {
                sx = 2;
                v.x = InternalType<T>::clamp(v.x, p.clamp);
              }
              if (sy) v.y *= p.slope;
              if (fabsf(v.y) > p.clamp) {
                sy = 2;
                v.y = InternalType<T>::clamp(v.y, p.clamp);
              }
              if (sz) v.z *= p.slope;
              if (fabsf(v.z) > p.clamp) {
                sz = 2;
                v.z = InternalType<T>::clamp(v.z, p.clamp);
              }
              if (sw) v.w *= p.slope;
              if (fabsf(v.w) > p.clamp) {
                sw = 2;
                v.w = InternalType<T>::clamp(v.w, p.clamp);
              }

              if ((uint32_t)signXb < p.swLimit &&
                  (uint32_t)signY < p.sShape.y && signY >= minY) {
                p.s[si] = sx + (sy << 2) + (sz << 4) + (sw << 6);
              }
            } else {
              // Determine and write signs.
              if ((uint32_t)signXb < p.swLimit &&
                  (uint32_t)signY < p.sShape.y && signY >= minY) {
                int sx = __float_as_uint(v.x) >> 31;
                int sy = __float_as_uint(v.y) >> 31;
                int sz = __float_as_uint(v.z) >> 31;
                int sw = __float_as_uint(v.w) >> 31;
                if (sx) v.x *= p.slope;
                if (fabsf(v.x) > p.clamp) {
                  sx = 2;
                  v.x = InternalType<T>::clamp(v.x, p.clamp);
                }
                if (sy) v.y *= p.slope;
                if (fabsf(v.y) > p.clamp) {
                  sy = 2;
                  v.y = InternalType<T>::clamp(v.y, p.clamp);
                }
                if (sz) v.z *= p.slope;
                if (fabsf(v.z) > p.clamp) {
                  sz = 2;
                  v.z = InternalType<T>::clamp(v.z, p.clamp);
                }
                if (sw) v.w *= p.slope;
                if (fabsf(v.w) > p.clamp) {
                  sw = 2;
                  v.w = InternalType<T>::clamp(v.w, p.clamp);
                }

                p.s[si] = sx + (sy << 2) + (sz << 4) + (sw << 6);
              } else {
                // Just compute the values.
                if (v.x < 0.f) v.x *= p.slope;
                v.x = InternalType<T>::clamp(v.x, p.clamp);
                if (v.y < 0.f) v.y *= p.slope;
                v.y = InternalType<T>::clamp(v.y, p.clamp);
                if (v.z < 0.f) v.z *= p.slope;
                v.z = InternalType<T>::clamp(v.z, p.clamp);
                if (v.w < 0.f) v.w *= p.slope;
                v.w = InternalType<T>::clamp(v.w, p.clamp);
              }
            }
          } else if (signRead)  // Read sign and apply.
          {
            if ((uint32_t)signY < p.sShape.y) {
              int s = 0;
              if ((uint32_t)signXb < p.swLimit) s = p.s[si];
              if ((uint32_t)signXb + 1 < p.swLimit) s |= p.s[si + 1] << 8;
              s >>= (signX & 3) << 1;
              if (s & 0x01) v.x *= p.slope;
              if (s & 0x02) v.x = 0.f;
              if (s & 0x04) v.y *= p.slope;
              if (s & 0x08) v.y = 0.f;
              if (s & 0x10) v.z *= p.slope;
              if (s & 0x20) v.z = 0.f;
              if (s & 0x40) v.w *= p.slope;
              if (s & 0x80) v.w = 0.f;
            }
          } else  // Forward pass with no sign write.
          {
            if (v.x < 0.f) v.x *= p.slope;
            v.x = InternalType<T>::clamp(v.x, p.clamp);
            if (v.y < 0.f) v.y *= p.slope;
            v.y = InternalType<T>::clamp(v.y, p.clamp);
            if (v.z < 0.f) v.z *= p.slope;
            v.z = InternalType<T>::clamp(v.z, p.clamp);
            if (v.w < 0.f) v.w *= p.slope;
            v.w = InternalType<T>::clamp(v.w, p.clamp);
          }

          s_tileUpXY[idx + 0] = v.x;
          s_tileUpXY[idx + 1] = v.y;
          s_tileUpXY[idx + 2] = v.z;
          s_tileUpXY[idx + 3] = v.w;
        }
      } else if (up == 1) {
        __syncthreads();
        uint32_t groupMask = 15 << ((threadIdx.x & 31) & ~3);
        int minY = tileOutY ? (tileOutY - tileOutH) * down + tileUpH
                            : 0;  // Skip already written signs.
        for (int idx = threadIdx.x; idx < tileUpW * tileUpH;
             idx += blockDim.x) {
          int relUpX0, relUpY0;
          fast_div_mod<tileUpW>(relUpX0, relUpY0, idx);
          scalar_t v = s_tileIn[idx] * (scalar_t)c_fu[0];  // 1x1 filter.

          int x = tileOutX * down + relUpX0;
          int y = tileOutY * down + relUpY0;
          int signX = x + p.sOfs.x;
          int signY = y + p.sOfs.y;
          int signZ = blockIdx.z + p.blockZofs;
          int signXb = signX >> 2;
          index_t si =
              signXb + p.sShape.x * (signY + (index_t)p.sShape.y * signZ);
          v *= (scalar_t)((float)up * (float)up * p.gain);

          if (signWrite) {
            if (!enableWriteSkip) {
              // Determine and write sign.
              uint32_t s = 0;
              uint32_t signXbit = (1u << signXo);
              if (v < 0.f) {
                s = signXbit;
                v *= p.slope;
              }
              if (fabsf(v) > p.clamp) {
                s = signXbit * 2;
                v = InternalType<T>::clamp(v, p.clamp);
              }
              if ((uint32_t)signXb < p.swLimit &&
                  (uint32_t)signY < p.sShape.y && signY >= minY) {
#ifndef MMCV_WITH_HIP
                s += __shfl_xor_sync(groupMask, s, 1);  // Coalesce.
                s += __shfl_xor_sync(groupMask, s, 2);  // Coalesce.
#else
                s += __shfl_xor(s, 1);  // Coalesce.
                s += __shfl_xor(s, 2);  // Coalesce.
#endif
                p.s[si] = s;                            // Write.
              }
            } else {
              // Determine and write sign.
              if ((uint32_t)signXb < p.swLimit &&
                  (uint32_t)signY < p.sShape.y && signY >= minY) {
                uint32_t s = 0;
                uint32_t signXbit = (1u << signXo);
                if (v < 0.f) {
                  s = signXbit;
                  v *= p.slope;
                }
                if (fabsf(v) > p.clamp) {
                  s = signXbit * 2;
                  v = InternalType<T>::clamp(v, p.clamp);
                }
#ifndef MMCV_WITH_HIP
                s += __shfl_xor_sync(groupMask, s, 1);  // Coalesce.
                s += __shfl_xor_sync(groupMask, s, 2);  // Coalesce.
#else
                s += __shfl_xor(s, 1);  // Coalesce.
                s += __shfl_xor(s, 2);  // Coalesce.
#endif
                p.s[si] = s;                            // Write.
              } else {
                // Just compute the value.
                if (v < 0.f) v *= p.slope;
                v = InternalType<T>::clamp(v, p.clamp);
              }
            }
          } else if (signRead) {
            // Read sign and apply if within sign tensor bounds.
            if ((uint32_t)signXb < p.swLimit && (uint32_t)signY < p.sShape.y) {
              int s = p.s[si];
              s >>= signXo;
              if (s & 1) v *= p.slope;
              if (s & 2) v = 0.f;
            }
          } else  // Forward pass with no sign write.
          {
            if (v < 0.f) v *= p.slope;
            v = InternalType<T>::clamp(v, p.clamp);
          }

          if (!downInline)  // Write into temporary buffer.
            s_tileUpXY[idx] = v;
          else if ((uint32_t)x < p.yShape.x &&
                   (uint32_t)y <
                       p.yShape.y)  // Write directly into output buffer
            *((T *)((char *)p.y + (x * get_stride<index_t>(p.yStride.x) +
                                   y * get_stride<index_t>(p.yStride.y) +
                                   mapOfsOut))) = (T)(v * (scalar_t)c_fd[0]);
        }
      }
    }

    // Downsampling.
    if (filterMode == MODE_SUSD || filterMode == MODE_FUSD) {
      // Horizontal downsampling.
      __syncthreads();
      if (down == 4 && tileOutW % 4 == 0) {
        // Calculate 4 pixels at a time.
        for (int idx = threadIdx.x * 4; idx < tileOutW * tileUpH;
             idx += blockDim.x * 4) {
          int relOutX0, relUpY;
          fast_div_mod<tileOutW>(relOutX0, relUpY, idx);
          int relUpX0 = relOutX0 * down;
          int src0 = relUpY * tileUpW + relUpX0;
          vec4_t v = InternalType<T>::zero_vec4();
#pragma unroll
          for (int step = 0; step < fdSize; step++) {
            v.x += s_tileUpXY[src0 + 0 + step] * (scalar_t)c_fd[step];
            v.y += s_tileUpXY[src0 + 4 + step] * (scalar_t)c_fd[step];
            v.z += s_tileUpXY[src0 + 8 + step] * (scalar_t)c_fd[step];
            v.w += s_tileUpXY[src0 + 12 + step] * (scalar_t)c_fd[step];
          }
          s_tileDownX[idx + 0] = v.x;
          s_tileDownX[idx + 1] = v.y;
          s_tileDownX[idx + 2] = v.z;
          s_tileDownX[idx + 3] = v.w;
        }
      } else if ((down == 2 || down == 4) && (tileOutW % 2 == 0)) {
        // Calculate 2 pixels at a time.
        for (int idx = threadIdx.x * 2; idx < tileOutW * tileUpH;
             idx += blockDim.x * 2) {
          int relOutX0, relUpY;
          fast_div_mod<tileOutW>(relOutX0, relUpY, idx);
          int relUpX0 = relOutX0 * down;
          int src0 = relUpY * tileUpW + relUpX0;
          vec2_t v = InternalType<T>::zero_vec2();
#pragma unroll
          for (int step = 0; step < fdSize; step++) {
            v.x += s_tileUpXY[src0 + 0 + step] * (scalar_t)c_fd[step];
            v.y += s_tileUpXY[src0 + down + step] * (scalar_t)c_fd[step];
          }
          s_tileDownX[idx + 0] = v.x;
          s_tileDownX[idx + 1] = v.y;
        }
      } else {
        // Calculate 1 pixel at a time.
        for (int idx = threadIdx.x; idx < tileOutW * tileUpH;
             idx += blockDim.x) {
          int relOutX0, relUpY;
          fast_div_mod<tileOutW>(relOutX0, relUpY, idx);
          int relUpX0 = relOutX0 * down;
          int src = relUpY * tileUpW + relUpX0;
          scalar_t v = 0.f;
#pragma unroll
          for (int step = 0; step < fdSize; step++)
            v += s_tileUpXY[src + step] * (scalar_t)c_fd[step];
          s_tileDownX[idx] = v;
        }
      }

      // Vertical downsampling & store output tile.
      __syncthreads();
      for (int idx = threadIdx.x; idx < tileOutW * tileOutH;
           idx += blockDim.x) {
        int relOutX, relOutY0;
        fast_div_mod<tileOutW>(relOutX, relOutY0, idx);
        int relUpY0 = relOutY0 * down;
        int src0 = relUpY0 * tileOutW + relOutX;
        scalar_t v = 0;
#pragma unroll
        for (int step = 0; step < fdSize; step++)
          v += s_tileDownX[src0 + step * tileOutW] * (scalar_t)c_fd[step];

        int outX = tileOutX + relOutX;
        int outY = tileOutY + relOutY0;

        if (outX < p.yShape.x & outY < p.yShape.y)
          *((T *)((char *)p.y + (outX * get_stride<index_t>(p.yStride.x) +
                                 outY * get_stride<index_t>(p.yStride.y) +
                                 mapOfsOut))) = (T)v;
      }
    } else if (filterMode == MODE_SUFD || filterMode == MODE_FUFD) {
      // Full downsampling filter.
      if (down == 2) {
        // 2-wide.
        __syncthreads();
        for (int idx = threadIdx.x * 2; idx < tileOutW * tileOutH;
             idx += blockDim.x * 2) {
          int relOutX0, relOutY0;
          fast_div_mod<tileOutW>(relOutX0, relOutY0, idx);
          int relUpX0 = relOutX0 * down;
          int relUpY0 = relOutY0 * down;
          int src0 = relUpY0 * tileUpW + relUpX0;
          vec2_t v = InternalType<T>::zero_vec2();
#pragma unroll
          for (int sy = 0; sy < fdSize; sy++)
#pragma unroll
            for (int sx = 0; sx < fdSize; sx++) {
              v.x += s_tileUpXY[src0 + 0 + sx + sy * tileUpW] *
                     (scalar_t)c_fd[sx + sy * MAX_FILTER_SIZE];
              v.y += s_tileUpXY[src0 + 2 + sx + sy * tileUpW] *
                     (scalar_t)c_fd[sx + sy * MAX_FILTER_SIZE];
            }

          int outX = tileOutX + relOutX0;
          int outY = tileOutY + relOutY0;
          if ((uint32_t)outY < p.yShape.y) {
            index_t ofs = outX * get_stride<index_t>(p.yStride.x) +
                          outY * get_stride<index_t>(p.yStride.y) + mapOfsOut;
            if (outX + 0 < p.yShape.x) *((T *)((char *)p.y + ofs)) = (T)v.x;
            if (outX + 1 < p.yShape.x)
              *((T *)((char *)p.y + ofs + get_stride<index_t>(p.yStride.x))) =
                  (T)v.y;
          }
        }
      } else if (down == 1 && !downInline) {
        // Thread per pixel.
        __syncthreads();
        for (int idx = threadIdx.x; idx < tileOutW * tileOutH;
             idx += blockDim.x) {
          int relOutX0, relOutY0;
          fast_div_mod<tileOutW>(relOutX0, relOutY0, idx);
          scalar_t v = s_tileUpXY[idx] * (scalar_t)c_fd[0];  // 1x1 filter.

          int outX = tileOutX + relOutX0;
          int outY = tileOutY + relOutY0;
          if ((uint32_t)outX < p.yShape.x && (uint32_t)outY < p.yShape.y)
            *((T *)((char *)p.y + (outX * get_stride<index_t>(p.yStride.x) +
                                   outY * get_stride<index_t>(p.yStride.y) +
                                   mapOfsOut))) = (T)v;
        }
      }
    }

    if (!enableXrep) break;
  }
}

//------------------------------------------------------------------------
// Compute activation function and signs for upsampled data tensor, modifying
// data tensor in-place. Used for accelerating the generic variant. Sign tensor
// is known to be contiguous, and p.x and p.s have the same z, w dimensions.
// 64-bit indexing is always used.

template <class T, bool signWrite, bool signRead>
static __global__ void filtered_lrelu_act_kernel(
    filtered_lrelu_act_kernel_params p) {
  typedef typename InternalType<T>::scalar_t scalar_t;

  // Indexing.
  int32_t x = threadIdx.x + blockIdx.x * blockDim.x;
  int32_t ymax = signWrite ? p.sShape.y : p.xShape.y;
  int32_t qmax =
      p.xShape.z * p.xShape.w;  // Combined minibatch*channel maximum index.

  // Loop to accommodate oversized tensors.
  for (int32_t q = blockIdx.z; q < qmax; q += gridDim.z)
    for (int32_t y = blockIdx.y; y < ymax; y += gridDim.y) {
      // Extract z and w (channel, minibatch index).
      int32_t w = q / p.xShape.z;
      int32_t z = q - w * p.xShape.z;

      // Choose behavior based on sign read/write mode.
      if (signWrite) {
        // Process value if in p.x.
        uint32_t s = 0;
        if (x < p.xShape.x && y < p.xShape.y) {
          int64_t ix = x * p.xStride.x + y * p.xStride.y + z * p.xStride.z +
                       w * p.xStride.w;
          T *pv = ((T *)p.x) + ix;
          scalar_t v = (scalar_t)(*pv);

          // Gain, LReLU, clamp.
          v *= p.gain;
          if (v < 0.f) {
            v *= p.slope;
            s = 1;  // Sign.
          }
          if (fabsf(v) > p.clamp) {
            v = InternalType<T>::clamp(v, p.clamp);
            s = 2;  // Clamp.
          }

          *pv = (T)v;  // Write value.
        }

        // Coalesce into threads 0 and 16 of warp.
        uint32_t m = (threadIdx.x & 16) ? 0xffff0000u : 0x0000ffffu;
        s <<= ((threadIdx.x & 15) << 1);  // Shift into place.
#ifndef MMCV_WITH_HIP
        s |= __shfl_xor_sync(m, s, 1);    // Distribute.
        s |= __shfl_xor_sync(m, s, 2);
        s |= __shfl_xor_sync(m, s, 4);
        s |= __shfl_xor_sync(m, s, 8);
#else
        s |= __shfl_xor(s, 1);    // Distribute.
        s |= __shfl_xor(s, 2);
        s |= __shfl_xor(s, 4);
        s |= __shfl_xor(s, 8);
#endif
        // Write signs if leader and in p.s.
        if (!(threadIdx.x & 15) && x < p.sShape.x)  // y is always in.
        {
          uint64_t is =
              x + p.sShape.x * (y + (int64_t)p.sShape.y * q);  // Contiguous.
          ((uint32_t *)p.s)[is >> 4] = s;
        }
      } else if (signRead) {
        // Process value if in p.x.
        if (x < p.xShape.x)  // y is always in.
        {
          int64_t ix = x * p.xStride.x + y * p.xStride.y + z * p.xStride.z +
                       w * p.xStride.w;
          T *pv = ((T *)p.x) + ix;
          scalar_t v = (scalar_t)(*pv);
          v *= p.gain;

          // Apply sign buffer offset.
          uint32_t sx = x + p.sOfs.x;
          uint32_t sy = y + p.sOfs.y;

          // Read and apply signs if we land inside valid region of sign buffer.
          if (sx < p.sShape.x && sy < p.sShape.y) {
            uint64_t is =
                (sx >> 2) + (p.sShape.x >> 2) *
                                (sy + (uint64_t)p.sShape.y * q);  // Contiguous.
            unsigned char s = p.s[is];
            s >>= (sx & 3) << 1;  // Shift into place.
            if (s & 1)            // Sign?
              v *= p.slope;
            if (s & 2)  // Clamp?
              v = 0.f;
          }

          *pv = (T)v;  // Write value.
        }
      } else {
        // Forward pass with no sign write. Process value if in p.x.
        if (x < p.xShape.x)  // y is always in.
        {
          int64_t ix = x * p.xStride.x + y * p.xStride.y + z * p.xStride.z +
                       w * p.xStride.w;
          T *pv = ((T *)p.x) + ix;
          scalar_t v = (scalar_t)(*pv);
          v *= p.gain;
          if (v < 0.f) v *= p.slope;
          if (fabsf(v) > p.clamp) v = InternalType<T>::clamp(v, p.clamp);
          *pv = (T)v;  // Write value.
        }
      }
    }
}

template <class T, bool signWrite, bool signRead>
void *choose_filtered_lrelu_act_kernel(void) {
  return (void *)filtered_lrelu_act_kernel<T, signWrite, signRead>;
}

//------------------------------------------------------------------------
// CUDA kernel selection.

template <class T, class index_t, bool signWrite, bool signRead>
filtered_lrelu_kernel_spec choose_filtered_lrelu_kernel(
    const filtered_lrelu_kernel_params &p, int sharedKB) {
  filtered_lrelu_kernel_spec s = {0};

  // Return the first matching kernel.
#define CASE(SH, U, FU, D, FD, MODE, TW, TH, W, XR, WS)                        \
  if (sharedKB >= SH)                                                          \
    if ((p.fuShape.y == 0 && (MODE == MODE_SUSD || MODE == MODE_SUFD)) ||      \
        (p.fuShape.y > 0 && (MODE == MODE_FUSD || MODE == MODE_FUFD)))         \
      if ((p.fdShape.y == 0 && (MODE == MODE_SUSD || MODE == MODE_FUSD)) ||    \
          (p.fdShape.y > 0 && (MODE == MODE_SUFD || MODE == MODE_FUFD)))       \
        if (p.up == U && p.fuShape.x <= FU && p.fuShape.y <= FU &&             \
            p.down == D && p.fdShape.x <= FD && p.fdShape.y <= FD) {           \
          static_assert((D * TW % 4) == 0,                                     \
                        "down * tileWidth must be divisible by 4");            \
          static_assert(                                                       \
              FU % U == 0,                                                     \
              "upscaling filter size must be multiple of upscaling factor");   \
          static_assert(FD % D == 0,                                           \
                        "downscaling filter size must be multiple of "         \
                        "downscaling factor");                                 \
          s.setup = (void *)setup_filters_kernel;                              \
          s.exec = (void *)                                                    \
              filtered_lrelu_kernel<T, index_t, SH, signWrite, signRead, MODE, \
                                    U, FU, D, FD, TW, TH, W * 32, !!XR, !!WS>; \
          s.tileOut = make_int2(TW, TH);                                       \
          s.numWarps = W;                                                      \
          s.xrep = XR;                                                         \
          s.dynamicSharedKB = (SH == 48) ? 0 : SH;                             \
          return s;                                                            \
        }

  // Launch parameters for various kernel specializations.
  // Small filters must be listed before large filters, otherwise the kernel for
  // larger filter will always match first. Kernels that use more shared memory
  // must be listed before those that use less, for the same reason.

  CASE(/*sharedKB*/ 48, /*up,fu*/ 1, 1, /*down,fd*/ 1, 1, /*mode*/ MODE_FUFD,
       /*tw,th,warps,xrep,wskip*/ 64, 178, 32, 0, 0)  // 1t-upf1-downf1
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 8, /*down,fd*/ 1, 1, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 152, 95, 16, 0, 0)  // 4t-ups2-downf1
  CASE(/*sharedKB*/ 48, /*up,fu*/ 1, 1, /*down,fd*/ 2, 8, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 56, 22, 16, 0, 0)  // 4t-upf1-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 8, /*down,fd*/ 2, 8, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 56, 29, 16, 11, 0)  // 4t-ups2-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 8, /*down,fd*/ 2, 8, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 60, 28, 16, 0, 0)  // 4t-upf2-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 8, /*down,fd*/ 2, 8, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 56, 28, 16, 0, 0)  // 4t-ups2-downf2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 4, 16, /*down,fd*/ 2, 8, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 56, 31, 16, 11, 0)  // 4t-ups4-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 4, 16, /*down,fd*/ 2, 8, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 56, 36, 16, 0, 0)  // 4t-ups4-downf2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 8, /*down,fd*/ 4, 16, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 16, 22, 16, 12, 0)  // 4t-ups2-downs4
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 8, /*down,fd*/ 4, 16, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 29, 15, 16, 0, 0)  // 4t-upf2-downs4
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 12, /*down,fd*/ 1, 1, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 96, 150, 28, 0, 0)  // 6t-ups2-downf1
  CASE(/*sharedKB*/ 48, /*up,fu*/ 1, 1, /*down,fd*/ 2, 12, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 32, 35, 24, 0, 0)  // 6t-upf1-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 12, /*down,fd*/ 2, 12, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 32, 46, 16, 10, 0)  // 6t-ups2-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 12, /*down,fd*/ 2, 12, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 58, 28, 24, 8, 0)  // 6t-upf2-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 12, /*down,fd*/ 2, 12, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 52, 28, 16, 0, 0)  // 6t-ups2-downf2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 4, 24, /*down,fd*/ 2, 12, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 32, 51, 16, 5, 0)  // 6t-ups4-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 4, 24, /*down,fd*/ 2, 12, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 32, 56, 16, 6, 0)  // 6t-ups4-downf2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 12, /*down,fd*/ 4, 24, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 16, 18, 16, 12, 0)  // 6t-ups2-downs4
  CASE(/*sharedKB*/ 96, /*up,fu*/ 2, 12, /*down,fd*/ 4, 24, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 27, 31, 32, 6, 0)  // 6t-upf2-downs4 96kB
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 12, /*down,fd*/ 4, 24, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 27, 13, 24, 0, 0)  // 6t-upf2-downs4
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 16, /*down,fd*/ 1, 1, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 148, 89, 24, 0, 0)  // 8t-ups2-downf1
  CASE(/*sharedKB*/ 48, /*up,fu*/ 1, 1, /*down,fd*/ 2, 16, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 32, 31, 16, 5, 0)  // 8t-upf1-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 16, /*down,fd*/ 2, 16, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 32, 41, 16, 9, 0)  // 8t-ups2-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 16, /*down,fd*/ 2, 16, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 56, 26, 24, 0, 0)  // 8t-upf2-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 16, /*down,fd*/ 2, 16, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 32, 40, 16, 0, 0)  // 8t-ups2-downf2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 4, 32, /*down,fd*/ 2, 16, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 32, 46, 24, 5, 0)  // 8t-ups4-downs2
  CASE(/*sharedKB*/ 48, /*up,fu*/ 4, 32, /*down,fd*/ 2, 16, /*mode*/ MODE_SUFD,
       /*tw,th,warps,xrep,wskip*/ 32, 50, 16, 0, 0)  // 8t-ups4-downf2
  CASE(/*sharedKB*/ 96, /*up,fu*/ 2, 16, /*down,fd*/ 4, 32, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 24, 24, 32, 12, 1)  // 8t-ups2-downs4 96kB
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 16, /*down,fd*/ 4, 32, /*mode*/ MODE_SUSD,
       /*tw,th,warps,xrep,wskip*/ 16, 13, 16, 10, 1)  // 8t-ups2-downs4
  CASE(/*sharedKB*/ 96, /*up,fu*/ 2, 16, /*down,fd*/ 4, 32, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 25, 28, 28, 4, 0)  // 8t-upf2-downs4 96kB
  CASE(/*sharedKB*/ 48, /*up,fu*/ 2, 16, /*down,fd*/ 4, 32, /*mode*/ MODE_FUSD,
       /*tw,th,warps,xrep,wskip*/ 25, 10, 24, 0, 0)  // 8t-upf2-downs4

#undef CASE
  return s;  // No kernel found.
}

//------------------------------------------------------------------------

#define BUILD_FILTERED_LRELU_OP 1

#ifndef MMCV_WITH_HIP
#ifdef __GNUC__
#if __GNUC__ < 6
#undef BUILD_FILTERED_LRELU_OP
#define BUILD_FILTERED_LRELU_OP 0
#endif
#endif


#if CUDA_VERSION < 10020
#undef BUILD_FILTERED_LRELU_OP
#define BUILD_FILTERED_LRELU_OP 0
#endif
#endif

#if BUILD_FILTERED_LRELU_OP == 1
std::tuple<torch::Tensor, torch::Tensor, int> filtered_lrelu_op(
    torch::Tensor x, torch::Tensor fu, torch::Tensor fd, torch::Tensor b,
    torch::Tensor si, int up, int down, int px0, int px1, int py0, int py1,
    int sx, int sy, float gain, float slope, float clamp, bool flip_filters,
    bool writeSigns) {
  // Set CUDA device.
  TORCH_CHECK(x.is_cuda(), "x must reside on CUDA device");
  const at::cuda::OptionalCUDAGuard device_guard(device_of(x));

  // Validate arguments.
  TORCH_CHECK(fu.device() == x.device() && fd.device() == x.device() &&
                  b.device() == x.device(),
              "all input tensors must reside on the same device");
  TORCH_CHECK(fu.dtype() == torch::kFloat && fd.dtype() == torch::kFloat,
              "fu and fd must be float32");
  TORCH_CHECK(b.dtype() == x.dtype(), "x and b must have the same dtype");
  TORCH_CHECK(x.dtype() == torch::kHalf || x.dtype() == torch::kFloat,
              "x and b must be float16 or float32");
  TORCH_CHECK(x.dim() == 4, "x must be rank 4");
  TORCH_CHECK(x.size(0) * x.size(1) <= INT_MAX && x.size(2) <= INT_MAX &&
                  x.size(3) <= INT_MAX,
              "x is too large");
  TORCH_CHECK(x.numel() > 0, "x is empty");
  TORCH_CHECK(
      (fu.dim() == 1 || fu.dim() == 2) && (fd.dim() == 1 || fd.dim() == 2),
      "fu and fd must be rank 1 or 2");
  TORCH_CHECK(fu.size(0) <= INT_MAX && fu.size(-1) <= INT_MAX,
              "fu is too large");
  TORCH_CHECK(fd.size(0) <= INT_MAX && fd.size(-1) <= INT_MAX,
              "fd is too large");
  TORCH_CHECK(fu.numel() > 0, "fu is empty");
  TORCH_CHECK(fd.numel() > 0, "fd is empty");
  TORCH_CHECK(b.dim() == 1 && b.size(0) == x.size(1),
              "b must be a vector with the same number of channels as x");
  TORCH_CHECK(up >= 1 && down >= 1, "up and down must be at least 1");

  // Figure out how much shared memory is available on the device.
  int maxSharedBytes = 0;
  int result=cudaDeviceGetAttribute(&maxSharedBytes,
                                      //  cudaDevAttrMaxSharedMemoryPerBlockOptin,
                                      // hipDeviceAttributeSharedMemPerBlockOptin,
                                       hipDeviceAttributeMaxSharedMemoryPerBlock,
                                       x.device().index());
  int sharedKB = maxSharedBytes >> 10;

  // Populate enough launch parameters to check if a CUDA kernel exists.
  filtered_lrelu_kernel_params p;
  p.up = up;
  p.down = down;
  p.fuShape =
      make_int2((int)fu.size(-1),
                fu.dim() == 2 ? (int)fu.size(0)
                              : 0);  // shape [n, 0] indicates separable filter.
  p.fdShape = make_int2((int)fd.size(-1), fd.dim() == 2 ? (int)fd.size(0) : 0);
  filtered_lrelu_kernel_spec test_spec =
      choose_filtered_lrelu_kernel<float, int32_t, false, false>(p, sharedKB);
  if (!test_spec.exec) {
    // No kernel found - return empty tensors and indicate missing kernel with
    // return code of -1.
    return std::make_tuple(torch::Tensor(), torch::Tensor(), -1);
  }

  // Input/output element size.
  int64_t sz = (x.dtype() == torch::kHalf) ? 2 : 4;

  // Input sizes.
  int64_t xw = (int)x.size(3);
  int64_t xh = (int)x.size(2);
  int64_t fut_w = (int)fu.size(-1) - 1;
  int64_t fut_h = (int)fu.size(0) - 1;
  int64_t fdt_w = (int)fd.size(-1) - 1;
  int64_t fdt_h = (int)fd.size(0) - 1;

  // Logical size of upsampled buffer.
  int64_t cw = xw * up + (px0 + px1) - fut_w;
  int64_t ch = xh * up + (py0 + py1) - fut_h;
  TORCH_CHECK(
      cw > fdt_w && ch > fdt_h,
      "upsampled buffer must be at least the size of downsampling filter");
  TORCH_CHECK(cw <= INT_MAX && ch <= INT_MAX, "upsampled buffer is too large");

  // Compute output size and allocate.
  int64_t yw = (cw - fdt_w + (down - 1)) / down;
  int64_t yh = (ch - fdt_h + (down - 1)) / down;
  TORCH_CHECK(yw > 0 && yh > 0, "output must be at least 1x1");
  TORCH_CHECK(yw <= INT_MAX && yh <= INT_MAX, "output is too large");
  torch::Tensor y = torch::empty({x.size(0), x.size(1), yh, yw}, x.options(),
                                 x.suggest_memory_format());

  // Allocate sign tensor.
  torch::Tensor so;
  torch::Tensor s = si;
  bool readSigns = !!s.numel();
  int64_t sw_active = 0;  // Active width of sign tensor.
  if (writeSigns) {
    sw_active = yw * down - (down - 1) + fdt_w;   // Active width in elements.
    int64_t sh = yh * down - (down - 1) + fdt_h;  // Height = active height.
    int64_t sw = (sw_active + 15) & ~15;  // Width  = active width in elements,
                                          // rounded up to multiple of 16.
    TORCH_CHECK(sh <= INT_MAX && (sw >> 2) <= INT_MAX, "signs is too large");
    s = so = torch::empty({x.size(0), x.size(1), sh, sw >> 2},
                          x.options().dtype(torch::kUInt8),
                          at::MemoryFormat::Contiguous);
  } else if (readSigns)
    sw_active = s.size(3) << 2;

  // Validate sign tensor if in use.
  if (readSigns || writeSigns) {
    TORCH_CHECK(s.is_contiguous(), "signs must be contiguous");
    TORCH_CHECK(s.dtype() == torch::kUInt8, "signs must be uint8");
    TORCH_CHECK(s.device() == x.device(),
                "signs must reside on the same device as x");
    TORCH_CHECK(s.dim() == 4, "signs must be rank 4");
    TORCH_CHECK(s.size(0) == x.size(0) && s.size(1) == x.size(1),
                "signs must have same batch & channels as x");
    TORCH_CHECK(s.size(2) <= INT_MAX && s.size(3) <= INT_MAX,
                "signs is too large");
  }

  // Populate rest of CUDA kernel parameters.
  p.x = x.data_ptr();
  p.y = y.data_ptr();
  p.b = b.data_ptr();
  p.s = (readSigns || writeSigns) ? s.data_ptr<unsigned char>() : 0;
  p.fu = fu.data_ptr<float>();
  p.fd = fd.data_ptr<float>();
  p.pad0 = make_int2(px0, py0);
  p.gain = gain;
  p.slope = slope;
  p.clamp = clamp;
  p.flip = (flip_filters) ? 1 : 0;
  p.xShape =
      make_int4((int)x.size(3), (int)x.size(2), (int)x.size(1), (int)x.size(0));
  p.yShape =
      make_int4((int)y.size(3), (int)y.size(2), (int)y.size(1), (int)y.size(0));
  p.sShape = (readSigns || writeSigns)
                 ? make_int2((int)s.size(3), (int)s.size(2))
                 : make_int2(0, 0);  // Width is in bytes. Contiguous.
  p.sOfs = make_int2(sx, sy);
  p.swLimit = (sw_active + 3) >> 2;  // Rounded up to bytes.

  // x, y, b strides are in bytes.
  p.xStride = make_longlong4(sz * x.stride(3), sz * x.stride(2),
                             sz * x.stride(1), sz * x.stride(0));
  p.yStride = make_longlong4(sz * y.stride(3), sz * y.stride(2),
                             sz * y.stride(1), sz * y.stride(0));
  p.bStride = sz * b.stride(0);

  // fu, fd strides are in elements.
  p.fuStride =
      make_longlong3(fu.stride(-1), fu.dim() == 2 ? fu.stride(0) : 0, 0);
  p.fdStride =
      make_longlong3(fd.stride(-1), fd.dim() == 2 ? fd.stride(0) : 0, 0);

  // Determine if indices don't fit in int32. Support negative strides although
  // Torch currently never produces those.
  bool index64b = false;
  if (std::abs(p.bStride * x.size(1)) > INT_MAX) index64b = true;
  if (std::min(x.size(0) * p.xStride.w, 0ll) +
          std::min(x.size(1) * p.xStride.z, 0ll) +
          std::min(x.size(2) * p.xStride.y, 0ll) +
          std::min(x.size(3) * p.xStride.x, 0ll) <
      -INT_MAX)
    index64b = true;
  if (std::max(x.size(0) * p.xStride.w, 0ll) +
          std::max(x.size(1) * p.xStride.z, 0ll) +
          std::max(x.size(2) * p.xStride.y, 0ll) +
          std::max(x.size(3) * p.xStride.x, 0ll) >
      INT_MAX)
    index64b = true;
  if (std::min(y.size(0) * p.yStride.w, 0ll) +
          std::min(y.size(1) * p.yStride.z, 0ll) +
          std::min(y.size(2) * p.yStride.y, 0ll) +
          std::min(y.size(3) * p.yStride.x, 0ll) <
      -INT_MAX)
    index64b = true;
  if (std::max(y.size(0) * p.yStride.w, 0ll) +
          std::max(y.size(1) * p.yStride.z, 0ll) +
          std::max(y.size(2) * p.yStride.y, 0ll) +
          std::max(y.size(3) * p.yStride.x, 0ll) >
      INT_MAX)
    index64b = true;
  if (s.numel() > INT_MAX) index64b = true;

  // Choose CUDA kernel.
  filtered_lrelu_kernel_spec spec = {0};
  AT_DISPATCH_FLOATING_TYPES_AND_HALF(
      x.scalar_type(), "filtered_lrelu_cuda", [&] {
        if constexpr (sizeof(scalar_t) <=
                      4)  // Exclude doubles. constexpr
                          // prevents template instantiation.
        {
          // Choose kernel based on index type, datatype and sign read/write
          // modes.
          if (!index64b && writeSigns && !readSigns)
            spec = choose_filtered_lrelu_kernel<scalar_t, int32_t, true, false>(
                p, sharedKB);
          else if (!index64b && !writeSigns && readSigns)
            spec = choose_filtered_lrelu_kernel<scalar_t, int32_t, false, true>(
                p, sharedKB);
          else if (!index64b && !writeSigns && !readSigns)
            spec =
                choose_filtered_lrelu_kernel<scalar_t, int32_t, false, false>(
                    p, sharedKB);
          else if (index64b && writeSigns && !readSigns)
            spec = choose_filtered_lrelu_kernel<scalar_t, int64_t, true, false>(
                p, sharedKB);
          else if (index64b && !writeSigns && readSigns)
            spec = choose_filtered_lrelu_kernel<scalar_t, int64_t, false, true>(
                p, sharedKB);
          else if (index64b && !writeSigns && !readSigns)
            spec =
                choose_filtered_lrelu_kernel<scalar_t, int64_t, false, false>(
                    p, sharedKB);
        }
      });
  TORCH_CHECK(
      spec.exec,
      "internal error - CUDA kernel not found")  // This should not happen
                                                 // because we tested earlier
                                                 // that kernel exists.

  // Launch CUDA kernel.
  void *args[] = {&p};
  int bx = spec.numWarps * 32;
  int gx = (p.yShape.x - 1) / spec.tileOut.x + 1;
  int gy = (p.yShape.y - 1) / spec.tileOut.y + 1;
  int gz = p.yShape.z * p.yShape.w;

  // Repeat multiple horizontal tiles in a CTA?
  if (spec.xrep) {
    p.tilesXrep = spec.xrep;
    p.tilesXdim = gx;

    gx = (gx + p.tilesXrep - 1) / p.tilesXrep;
    std::swap(gx, gy);
  } else {
    p.tilesXrep = 0;
    p.tilesXdim = 0;
  }

  // Launch filter setup kernel.
#ifndef MMCV_WITH_HIP
  AT_CUDA_CHECK(cudaLaunchKernel(spec.setup, 1, 1024, args, 0,
                                 at::cuda::getCurrentCUDAStream()));
#else
  AT_CUDA_CHECK(hipLaunchKernel(spec.setup, 1, 1024, args, 0,
                                 at::cuda::getCurrentCUDAStream()));
#endif
  // Copy kernels to constant memory.
  if (writeSigns && !readSigns)
    AT_CUDA_CHECK((copy_filters(at::cuda::getCurrentCUDAStream())));
  else if (!writeSigns && readSigns)
    AT_CUDA_CHECK((copy_filters(at::cuda::getCurrentCUDAStream())));
  else if (!writeSigns && !readSigns)
    AT_CUDA_CHECK((copy_filters(at::cuda::getCurrentCUDAStream())));

  // Set cache and shared memory configurations for main kernel.
  AT_CUDA_CHECK(cudaFuncSetCacheConfig(spec.exec, cudaFuncCachePreferShared));
  if (spec.dynamicSharedKB)  // Need dynamically allocated shared memory?
    // AT_CUDA_CHECK(cudaFuncSetAttribute(
    AT_CUDA_CHECK(hipFuncSetAttribute(
        // spec.exec, cudaFuncAttributeMaxDynamicSharedMemorySize,
        spec.exec, hipFuncAttributeMaxDynamicSharedMemorySize,
        spec.dynamicSharedKB << 10));
  AT_CUDA_CHECK(
      cudaFuncSetSharedMemConfig(spec.exec, cudaSharedMemBankSizeFourByte));

  // Launch main kernel.
  const int maxSubGz = 65535;  // CUDA maximum for block z dimension.
  for (int zofs = 0; zofs < gz;
       zofs += maxSubGz)  // Do multiple launches if gz is too big.
  {
    p.blockZofs = zofs;
    int subGz = std::min(maxSubGz, gz - zofs);
#ifndef MMCV_WITH_HIP
    AT_CUDA_CHECK(cudaLaunchKernel(spec.exec, dim3(gx, gy, subGz), bx, args,
                                   spec.dynamicSharedKB << 10,
                                   at::cuda::getCurrentCUDAStream()));
#else
    AT_CUDA_CHECK(hipLaunchKernel(spec.exec, dim3(gx, gy, subGz), bx, args,
                                   spec.dynamicSharedKB << 10,
                                   at::cuda::getCurrentCUDAStream()));
#endif
  }

  // Done.
  return std::make_tuple(y, so, 0);
}

std::tuple<torch::Tensor, torch::Tensor, int> filtered_lrelu_op_impl(
    torch::Tensor x, torch::Tensor fu, torch::Tensor fd, torch::Tensor b,
    torch::Tensor si, int up, int down, int px0, int px1, int py0, int py1,
    int sx, int sy, float gain, float slope, float clamp, bool flip_filters,
    bool writeSigns);

REGISTER_DEVICE_IMPL(filtered_lrelu_op_impl, CUDA, filtered_lrelu_op);

#else

#pragma message(                           \
    "filtered_lrelu_op is not available. " \
    "Please update your compiler and cuda version.")

#endif
#undef BUILD_FILTERED_LRELU_OP

//------------------------------------------------------------------------

torch::Tensor filtered_lrelu_act_op(torch::Tensor x, torch::Tensor si, int sx,
                                    int sy, float gain, float slope,
                                    float clamp, bool writeSigns) {
  // Set CUDA device.
  TORCH_CHECK(x.is_cuda(), "x must reside on CUDA device");
  const at::cuda::OptionalCUDAGuard device_guard(device_of(x));

  // Validate arguments.
  TORCH_CHECK(x.dim() == 4, "x must be rank 4");
  TORCH_CHECK(x.size(0) * x.size(1) <= INT_MAX && x.size(2) <= INT_MAX &&
                  x.size(3) <= INT_MAX,
              "x is too large");
  TORCH_CHECK(x.numel() > 0, "x is empty");
  TORCH_CHECK(x.dtype() == torch::kHalf || x.dtype() == torch::kFloat ||
                  x.dtype() == torch::kDouble,
              "x must be float16, float32 or float64");

  // Output signs if we don't have sign input.
  torch::Tensor so;
  torch::Tensor s = si;
  bool readSigns = !!s.numel();
  if (writeSigns) {
    int64_t sw = x.size(3);
    sw = (sw + 15) & ~15;  // Round to a multiple of 16 for coalescing.
    s = so = torch::empty({x.size(0), x.size(1), x.size(2), sw >> 2},
                          x.options().dtype(torch::kUInt8),
                          at::MemoryFormat::Contiguous);
  }

  // Validate sign tensor if in use.
  if (readSigns || writeSigns) {
    TORCH_CHECK(s.is_contiguous(), "signs must be contiguous");
    TORCH_CHECK(s.dtype() == torch::kUInt8, "signs must be uint8");
    TORCH_CHECK(s.device() == x.device(),
                "signs must reside on the same device as x");
    TORCH_CHECK(s.dim() == 4, "signs must be rank 4");
    TORCH_CHECK(s.size(0) == x.size(0) && s.size(1) == x.size(1),
                "signs must have same batch & channels as x");
    TORCH_CHECK(s.size(2) <= INT_MAX && (s.size(3) << 2) <= INT_MAX,
                "signs tensor is too large");
  }

  // Initialize CUDA kernel parameters.
  filtered_lrelu_act_kernel_params p;
  p.x = x.data_ptr();
  p.s = (readSigns || writeSigns) ? s.data_ptr<unsigned char>() : 0;
  p.gain = gain;
  p.slope = slope;
  p.clamp = clamp;
  p.xShape =
      make_int4((int)x.size(3), (int)x.size(2), (int)x.size(1), (int)x.size(0));
  p.xStride =
      make_longlong4(x.stride(3), x.stride(2), x.stride(1), x.stride(0));
  p.sShape = (readSigns || writeSigns)
                 ? make_int2((int)s.size(3) << 2, (int)s.size(2))
                 : make_int2(0, 0);  // Width is in elements. Contiguous.
  p.sOfs = make_int2(sx, sy);

  // Choose CUDA kernel.
  void *func = 0;
  AT_DISPATCH_FLOATING_TYPES_AND_HALF(
      x.scalar_type(), "filtered_lrelu_act_cuda", [&] {
        if (writeSigns)
          func = choose_filtered_lrelu_act_kernel<scalar_t, true, false>();
        else if (readSigns)
          func = choose_filtered_lrelu_act_kernel<scalar_t, false, true>();
        else
          func = choose_filtered_lrelu_act_kernel<scalar_t, false, false>();
      });
  TORCH_CHECK(func, "internal error - CUDA kernel not found");

  // Launch CUDA kernel.
  void *args[] = {&p};
  int bx = 128;  // 4 warps per block.

  // Logical size of launch = writeSigns ? p.s : p.x
  uint32_t gx = writeSigns ? p.sShape.x : p.xShape.x;
  uint32_t gy = writeSigns ? p.sShape.y : p.xShape.y;
  uint32_t gz =
      p.xShape.z * p.xShape.w;  // Same as in p.sShape if signs are in use.
  gx = (gx - 1) / bx + 1;

  // Make sure grid y and z dimensions are within CUDA launch limits. Kernel
  // loops internally to do the rest.
  const uint32_t gmax = 65535;
  gy = std::min(gy, gmax);
  gz = std::min(gz, gmax);

  // Launch.
#ifndef MMCV_WITH_HIP
  AT_CUDA_CHECK(cudaLaunchKernel(func, dim3(gx, gy, gz), bx, args, 0,
                                 at::cuda::getCurrentCUDAStream()));
#else
  AT_CUDA_CHECK(hipLaunchKernel(func, dim3(gx, gy, gz), bx, args, 0,
                                 at::cuda::getCurrentCUDAStream()));
#endif
  return so;
}
