---
# SPDX-FileCopyrightText: Copyright (c) 2025-2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
# SPDX-License-Identifier: Apache-2.0
title: Inference Gateway (GAIE)
---

## Inference Gateway Setup with Dynamo

# Inference Gateway (GAIE)

Integrate Dynamo with the Gateway API Inference Extension for intelligent KV-aware request routing at the gateway layer.

EPP's default kv-routing approach is not token-aware because the prompt is not tokenized. But the Dynamo plugin uses a token-aware KV algorithm. It employs the dynamo router which implements kv routing by running your model's tokenizer inline. The EPP plugin configuration lives in [`helm/dynamo-gaie/epp-config-dynamo.yaml`](https://github.com/ai-dynamo/dynamo/blob/main/deploy/inference-gateway/standalone/helm/dynamo-gaie/epp-config-dynamo.yaml) per EPP [convention](https://gateway-api-inference-extension.sigs.k8s.io/guides/epp-configuration/config-text/).

Dynamo Integration with the Inference Gateway supports Aggregated and Disaggregated Serving. The epp config is the same for both. If no prefill workers found the service degrades gracefully to perform aggregated serving.
If you want to use LoRA deploy Dynamo without the Inference Gateway.

Currently, these setups are only supported with the kGateway based Inference Gateway.

## Table of Contents

- [Prerequisites](#prerequisites)
- [Installation Steps](#installation-steps)
  - [1. Install Dynamo Platform](#1-install-dynamo-platform)
  - [2. Deploy Inference Gateway](#2-deploy-inference-gateway)
  - [3. Deploy Your Model](#3-deploy-your-model)
  - [4. Build EPP image (Optional)](#4-build-epp-image-optional)
  - [5. Deploy](#5-deploy)
  - [6. Verify Installation](#6-verify-installation)
  - [7. Usage](#7-usage)
  - [8. Deleting the installation](#8-deleting-the-installation)
- [Gateway API Inference Extension Details](#gateway-api-inference-extension-integration)
  - [Router bookkeeping operations](#router-bookkeeping-operations)
  - [Header Routing Hints](#header-routing-hints)


## Prerequisites

- Kubernetes cluster with kubectl configured
- NVIDIA GPU drivers installed on worker nodes

## Installation Steps

### 1. Install Dynamo Platform ###

[See Quickstart Guide](./README.md) to install Dynamo Kubernetes Platform.

### 2. Deploy Inference Gateway ###

First, deploy an inference gateway service. In this example, we'll install `kgateway` based gateway implementation.

```bash
cd deploy/inference-gateway
export NAMESPACE=my-model # You can put the inference gateway into another namespace and then adjust your http-route.yaml
./scripts/install_gaie_crd_kgateway.sh
```
**Note**: The manifest at `config/manifests/gateway/kgateway/gateway.yaml` uses `gatewayClassName: agentgateway`, but kGateway's helm chart creates a GatewayClass named `kgateway`. The patch command in the script fixes this mismatch.

#### f. Verify the Gateway is running

```bash
kubectl get gateway inference-gateway

# Sample output
# NAME                CLASS      ADDRESS   PROGRAMMED   AGE
# inference-gateway   kgateway             True         1m
```


### 3. Setup secrets ###

Do not forget docker registry secret if needed.

```bash
kubectl create secret docker-registry docker-imagepullsecret \
  --docker-server=$DOCKER_SERVER \
  --docker-username=$DOCKER_USERNAME \
  --docker-password=$DOCKER_PASSWORD \
  --namespace=$NAMESPACE
```

Do not forget to include the HuggingFace token.

```bash
export HF_TOKEN=your_hf_token
kubectl create secret generic hf-token-secret \
  --from-literal=HF_TOKEN=${HF_TOKEN} \
  -n ${NAMESPACE}
```

Create a model configuration file similar to the vllm_agg_qwen.yaml for your model.
This file demonstrates the values needed for the Vllm Agg setup in [agg.yaml](../../examples/backends/vllm/deploy/agg.yaml)
Take a note of the model's block size provided in the model card.

### 4. Build EPP image (Optional)

You can either use the provided Dynamo FrontEnd image for the EPP image or you need to build your own Dynamo EPP custom image following the steps below.

```bash
# export env vars
export DOCKER_SERVER=ghcr.io/nvidia/dynamo	# Container registry
export IMAGE_TAG=YOUR-TAG # Or auto from git tag
cd deploy/inference-gateway/epp
make all # Do everything in one command
# or make all-push to also push


# Or step-by-step
make dynamo-lib # Build Dynamo library and copy to project
make image-load # Build Docker image and load locally
make image-push # Build and push to registry
make info # Check image tag
```

#### All-in-one Targets

| Target | Description |
|--------|-------------|
| `make dynamo-lib` | Build Dynamo static library and copy to project |
| `make all` | Build Dynamo lib + Docker image + load locally |
| `make all-push` | Build Dynamo lib + Docker image + push to registry |

### 5. Deploy

We recommend deploying Inference Gateway's Endpoint Picker as a Dynamo operator's managed component. Alternatively,
you could deploy it as a standalone pod.
Note that when deploying Dynamo with the Inference Gateway Extension each worker must have the FrontEnd as a sidecar.

#### 5.a. Deploy as a DGD component (recommended)

We provide an example for the Qwen vLLM below.
You have to deploy the Dynamo Graph and the HttpRoute service.
For the HttpRoute service make sure to specify the namespace where your gateway (i.e. kGateway was deployed) as shown below.
```bash
  parentRefs:
    - group: gateway.networking.k8s.io
      kind: Gateway
      name: inference-gateway
      namespace: my-model # the namespace where your gateway is deployed.
```

```bash
cd <dynamo-source-root>
kubectl apply -f examples/backends/vllm/deploy/gaie/agg.yaml -n my-model
kubectl apply -f examples/backends/vllm/deploy/gaie/http-route.yaml -n my-model
```

Examples for other models can be found in the recipes folder.

```bash
# Deploy PVC, having first Update `storageClassName` in recipes/llama-3-70b/model-cache/model-cache.yaml to match your cluster before deploying
kubectl apply -f recipes/llama-3-70b/model-cache/model-cache.yaml  -n ${NAMESPACE}
kubectl apply -f recipes/llama-3-70b/model-cache/model-download.yaml  -n ${NAMESPACE}
```
We provide examples for llama-3-70b vLLM under the `recipes/llama-3-70b/vllm/agg/gaie/` for aggregated and `recipes/llama-3-70b/vllm/disagg-single-node/gaie/` for disaggregated serving.
Use the proper folder in commands below.

```bash
# Deploy your Dynamo Graph.

# agg
kubectl apply -f recipes/llama-3-70b/vllm/agg/gaie/deploy.yaml -n ${NAMESPACE}
# Deploy the GAIE http-route CR.
kubectl apply -f recipes/llama-3-70b/vllm/agg/gaie/http-route.yaml -n ${NAMESPACE}

# or disagg
kubectl apply -f recipes/llama-3-70b/vllm/disagg-single-node/gaie/deploy.yaml  -n ${NAMESPACE}
kubectl apply -f recipes/llama-3-70b/vllm/disagg-single-node/gaie/http-route.yaml -n ${NAMESPACE}
```

- When using GAIE the FrontEnd does not choose the workers. The routing is determined in the EPP.
- The FrontEnd must run with `--router-mode direct` so that it respects the EPP's routing decisions passed via request headers.
- Use the `frontendSidecar` field on a worker service to have the operator automatically inject a fully configured frontend sidecar container with all required Dynamo env vars, probes, and ports:

```yaml
frontendSidecar:
  image: nvcr.io/nvidia/ai-dynamo/vllm-runtime:my-tag
  args:
    - --router-mode
    - direct
  envFromSecret: hf-token-secret
```

- The pre-selected worker (decode and prefill in case of the disaggregated serving) are passed in the request headers.
- The `--router-mode direct` flag ensures the routing respects this selection.

**Startup Probe Timeout:** The EPP has a default startup probe timeout of 30 minutes (10s × 180 failures).
If your model takes longer to load, increase the `failureThreshold` in the EPP's `startupProbe`. For example,
to allow 60 minutes for startup:

```yaml
extraPodSpec:
  mainContainer:
    startupProbe:
      failureThreshold: 360  # 10s × 360 = 60 minutes
```

**Gateway Namespace**
Note that this assumes your gateway is installed into `NAMESPACE=my-model` (examples' default)
If you installed it into a different namespace, you need to adjust the HttpRoute entry in http-route.yaml.


#### 5.b. Deploy as a standalone pod

We do not recommend this method but there are hints on how to do this here.

##### 5.b.1 Deploy Your Model ###

##### 5.b.2 Install Dynamo GIE helm chart ###

```bash
cd deploy/inference-gateway/standalone

# Export the EPP image - use the Dynamo FrontEnd image or build your own EPP image (see section 4)
export EPP_IMAGE=<the-epp-image>
```

```bash
helm upgrade --install dynamo-gaie ./helm/dynamo-gaie -n my-model -f ./vllm_agg_qwen.yaml --set-string extension.image=$EPP_IMAGE
```

By default, the Kubernetes discovery mechanism is used. If you prefer etcd, please use the `--set epp.dynamo.useEtcd=true` flag below.

```bash
helm upgrade --install dynamo-gaie ./helm/dynamo-gaie -n my-model -f ./vllm_agg_qwen.yaml --set-string extension.image=$EPP_IMAGE --set epp.dynamo.useEtcd=true
```

Key configurations include:

- An InferenceModel resource for the Qwen model
- A service for the inference gateway
- Required RBAC roles and bindings
- RBAC permissions
- dynamoGraphDeploymentName - the name of the Dynamo Graph where your model is deployed.


**Configuration**
You can configure the plugin by setting environment variables in the EPP component of your DGD in case of the operator-managed installation or in your [values.yaml](https://github.com/ai-dynamo/dynamo/blob/main/deploy/inference-gateway/standalone/helm/dynamo-gaie/values.yaml).

Common Vars for Routing Configuration:
- Set `DYN_BUSY_THRESHOLD` to configure the upper bound on how "full" a worker can be (often derived from kv_active_blocks or other load metrics) before the router skips it. If the selected worker exceeds this value, routing falls back to the next best candidate. By default the value is negative meaning this is not enabled.
- Set `DYN_DECODE_FALLBACK=true` to allow falling back to aggregated (decode-only) mode when prefill workers are unavailable. By default, disaggregated prefill-decode is enforced and requests fail if no prefill workers are found.
- Set `DYN_OVERLAP_SCORE_WEIGHT` to weigh how heavily the score uses token overlap (predicted KV cache hits) versus other factors (load, historical hit rate). Higher weight biases toward reusing workers with similar cached prefixes. (default: 1)
- Set `DYN_ROUTER_TEMPERATURE` to soften or sharpen the selection curve when combining scores. Low temperature makes the router pick the top candidate deterministically; higher temperature lets lower-scoring workers through more often (exploration).
- Set `DYN_USE_KV_EVENTS=false` if you want to disable the router listening for KV events while using kv-routing (default: true). SGLang workers require `--kv-events-config` and TRT-LLM workers require `--publish-events-and-metrics` to publish KV events. For vLLM, KV events are auto-configured when prefix caching is active (deprecated — use `--kv-events-config` explicitly)
- `DYN_ROUTER_TEMPERATURE` — Temperature for worker sampling via softmax (default: 0.0)
- `DYN_ROUTER_REPLICA_SYNC` — Enable replica synchronization (default: false)
- `DYN_ROUTER_TRACK_ACTIVE_BLOCKS` — Track active blocks (default: true)
- `DYN_ROUTER_TRACK_OUTPUT_BLOCKS` — Track output blocks during generation (default: false)
- See the [KV cache routing design](../design-docs/router-design.md) for details.

Stand-Alone installation only:
- Overwrite the `DYN_NAMESPACE` env var if needed to match your model's dynamo namespace.

### 6. Verify Installation ###

Check that all resources are properly deployed:

```bash
kubectl get inferencepool
kubectl get httproute
kubectl get service
kubectl get gateway
```

Sample output:

```bash
# kubectl get inferencepool
NAME        AGE
qwen-pool   33m

# kubectl get httproute
NAME        HOSTNAMES   AGE
qwen-route               33m
```

### 7. Usage ###

The Inference Gateway provides HTTP endpoints for model inference.

#### 1: Populate gateway URL for your k8s cluster ####

To test the gateway in minikube, use the following command:
a. User minikube tunnel to expose the gateway to the host
   This requires `sudo` access to the host machine. alternatively, you can use port-forward to expose the gateway to the host as shown in alternative (b).

```bash
# in first terminal
ps aux | grep "minikube tunnel" | grep -v grep # make sure minikube tunnel is not already running.
minikube tunnel # start the tunnel

# in second terminal where you want to send inference requests
GATEWAY_URL=$(kubectl get svc inference-gateway -n my-model -o jsonpath='{.spec.clusterIP}') && echo $GATEWAY_URL
```

b. use port-forward to expose the gateway to the host

```bash
# in first terminal
kubectl port-forward svc/inference-gateway 8000:80 -n {NAMESPACE} # for NAMESPACE put wherever you installed thee gateway i.e. kgateway-system

# in second terminal where you want to send inference requests
GATEWAY_URL=http://localhost:8000
```

#### 2: Check models deployed to inference gateway ####

a. Query models:

```bash
# in the second terminal where you GATEWAY_URL is set

curl $GATEWAY_URL/v1/models | jq .
```

Sample output:

```json
{
  "data": [
    {
      "created": 1753768323,
      "id": "Qwen/Qwen3-0.6B",
      "object": "object",
      "owned_by": "nvidia"
    }
  ],
  "object": "list"
}
```

b. Send inference request to gateway:

```bash
MODEL_NAME="Qwen/Qwen3-0.6B"
curl $GATEWAY_URL/v1/chat/completions \
  -H "Content-Type: application/json" \
  -d '{
      "model": "'"${MODEL_NAME}"'",
      "messages": [
      {
          "role": "user",
          "content": "In the heart of Eldoria, an ancient land of boundless magic and mysterious creatures, lies the long-forgotten city of Aeloria. Once a beacon of knowledge and power, Aeloria was buried beneath the shifting sands of time, lost to the world for centuries. You are an intrepid explorer, known for your unparalleled curiosity and courage, who has stumbled upon an ancient map hinting at ests that Aeloria holds a secret so profound that it has the potential to reshape the very fabric of reality. Your journey will take you through treacherous deserts, enchanted forests, and across perilous mountain ranges. Your Task: Character Background: Develop a detailed background for your character. Describe their motivations for seeking out Aeloria, their skills and weaknesses, and any personal connections to the ancient city or its legends. Are they driven by a quest for knowledge, a search for lost familt clue is hidden."
      }
      ],
      "stream":false,
      "max_tokens": 30,
      "temperature": 0.0
    }'
```

Sample inference output:

```json
{
  "choices": [
    {
      "finish_reason": "stop",
      "index": 0,
      "logprobs": null,
      "message": {
        "audio": null,
        "content": "<think>\nOkay, I need to develop a character background for the user's query. Let me start by understanding the requirements. The character is an",
        "function_call": null,
        "refusal": null,
        "role": "assistant",
        "tool_calls": null
      }
    }
  ],
  "created": 1753768682,
  "id": "chatcmpl-772289b8-5998-4f6d-bd61-3659b684b347",
  "model": "Qwen/Qwen3-0.6B",
  "object": "chat.completion",
  "service_tier": null,
  "system_fingerprint": null,
  "usage": {
    "completion_tokens": 29,
    "completion_tokens_details": null,
    "prompt_tokens": 196,
    "prompt_tokens_details": null,
    "total_tokens": 225
  }
}
```

***If you have more than one HttpRoute running on the cluster***
Add the host to your HttpRoute.yaml and add the header `curl -H "Host: llama3-70b-agg.example.com" ...` to every request.
```bash
spec:
  hostnames:
    - llama3-70b-agg.example.com
```

### 8. Deleting the installation ###

If you need to uninstall run:

```bash
kubectl delete dynamoGraphDeployment vllm-agg
helm uninstall dynamo-gaie -n my-model

# To uninstall GAIE
# 1. Delete the inference-gateway
kubectl delete gateway inference-gateway --ignore-not-found

# 2. Uninstall kgateway helm releases
helm uninstall kgateway -n kgateway-system
helm uninstall kgateway-crds -n kgateway-system

# 3. Delete the kgateway-system namespace (optional, cleans up everything in it)
helm uninstall kgateway --namespace kgateway-system
kubectl delete namespace kgateway-system --ignore-not-found

# 4. Delete the Inference Extension CRDs
IGW_LATEST_RELEASE=v1.2.1
kubectl delete -f https://github.com/kubernetes-sigs/gateway-api-inference-extension/releases/download/${IGW_LATEST_RELEASE}/manifests.yaml --ignore-not-found

# 5. Delete the Gateway API CRDs
GATEWAY_API_VERSION=v1.4.1
kubectl delete -f https://github.com/kubernetes-sigs/gateway-api/releases/download/$GATEWAY_API_VERSION/standard-install.yaml --ignore-not-found
```

## Gateway API Inference Extension Integration

This section documents the updated plugin implementation for Gateway API Inference Extension **v1.2.1**.

### Router bookkeeping operations

EPP performs Dynamo router book keeping operations so the FrontEnd's Router does not have to sync its state.


### Header Routing Hints

Since v1.2.1, the EPP uses a **header-only approach** for communicating routing decisions.
The plugins set HTTP headers that are forwarded to the backend workers.

#### Headers Set by Dynamo Plugins

| Header | Description | Set By |
|--------|-------------|--------|
| `x-worker-instance-id` | Primary worker ID (decode worker in disagg mode) | kv-aware-scorer |
| `x-prefill-instance-id` | Prefill worker ID (disaggregated mode only) | kv-aware-scorer |
