diff --git a/vllm/attention/backends/mla/common.py b/vllm/attention/backends/mla/common.py
index 54278f5f6..7eaf92feb 100644
--- a/vllm/attention/backends/mla/common.py
+++ b/vllm/attention/backends/mla/common.py
@@ -300,7 +300,8 @@ class MLACommonState(AttentionState, Generic[T]):
         cache_config = runner.cache_config
 
         self.chunked_prefill_enabled = scheduler_config.chunked_prefill_enabled
-        self.enable_prefix_caching = cache_config.enable_prefix_caching
+        # TODO ptarasiewicz: we pretend that prefix caching is enabled to make fetching from Decode kv cache work
+        self.enable_prefix_caching = True # cache_config.enable_prefix_caching
 
         if self.chunked_prefill_enabled or self.enable_prefix_caching:
             self.context_chunk_workspace_size = min(
@@ -735,8 +736,8 @@ class MLACommonMetadataBuilder(AttentionMetadataBuilder[T], Generic[T]):
         self.block_size = input_builder.block_size
         self.chunked_prefill_enabled = \
             self.runner.scheduler_config.chunked_prefill_enabled
-        self.enable_prefix_caching = \
-            self.runner.cache_config.enable_prefix_caching
+        # TODO ptarasiewicz: we pretend that prefix caching is enabled to make fetching from Decode kv cache work
+        self.enable_prefix_caching = True # self.runner.cache_config.enable_prefix_caching
 
         if self.chunked_prefill_enabled or self.enable_prefix_caching:
             attn_state = self.input_builder.runner.attn_state
diff --git a/vllm/config.py b/vllm/config.py
index 2912361ee..eea9cb65d 100644
--- a/vllm/config.py
+++ b/vllm/config.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import ast
 import copy
@@ -3091,6 +3104,9 @@ class KVTransferConfig(BaseModel):
     # The KV connector for vLLM to transmit KV caches between vLLM instances.
     kv_connector: Optional[str] = None
 
+    # Whether to use NIXL prepped xfer for KV cache transfer.
+    use_prepped_xfer: bool = True
+
     # The device used by kv connector to buffer the KV cache.
     # Currently only support 'cuda'.
     kv_buffer_device: Optional[str] = "cuda"
@@ -3100,7 +3116,7 @@ class KVTransferConfig(BaseModel):
     kv_buffer_size: float = 1e9
 
     # Whether this vLLM instance produces, consumes KV cache, or both. Choices
-    # are 'kv_producer', 'kv_consumer', and 'both'.
+    # are 'kv_producer', 'kv_consumer', and 'kv_both'.
     kv_role: Optional[str] = None
 
     # The rank of this vLLM instance in the KV cache transfer. Typical value:
@@ -3155,11 +3171,16 @@ class KVTransferConfig(BaseModel):
                 f"Supported roles are `kv_producer`, `kv_consumer`, "
                 f"and `kv_both`")
 
-        if self.kv_connector is not None and self.kv_role is None:
+        if self.kv_connector is not None and self.kv_connector != "DynamoNixlConnector" and self.kv_role is None:
             raise ValueError("Please specify kv_disagg_role when kv_connector "
                              "is set, supported roles are `kv_producer`, "
                              "`kv_consumer`, and `kv_both`")
 
+        if self.use_prepped_xfer is False:
+            logger.warning("`use_prepped_xfer` parameter is deprecated. All transfers will be done using prepped xfer.")
+            self.use_prepped_xfer = True
+
+
     @property
     def is_kv_transfer_instance(self) -> bool:
         return self.kv_connector is not None and \
diff --git a/vllm/core/block/cpu_gpu_block_allocator.py b/vllm/core/block/cpu_gpu_block_allocator.py
index d64142e77..6279767cb 100644
--- a/vllm/core/block/cpu_gpu_block_allocator.py
+++ b/vllm/core/block/cpu_gpu_block_allocator.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 from typing import Dict, FrozenSet, List, Optional, Tuple
 
@@ -6,6 +19,7 @@ from vllm.core.block.interfaces import (Block, BlockAllocator, BlockId,
                                         DeviceAwareBlockAllocator)
 from vllm.core.block.naive_block import NaiveBlock, NaiveBlockAllocator
 from vllm.core.block.prefix_caching_block import PrefixCachingBlockAllocator
+from vllm.core.event_manager import KVCacheEventManager
 from vllm.platforms import current_platform
 from vllm.utils import Device
 
@@ -28,6 +42,7 @@ class CpuGpuBlockAllocator(DeviceAwareBlockAllocator):
         num_gpu_blocks: int,
         num_cpu_blocks: int,
         block_size: int,
+        event_manager: Optional[KVCacheEventManager] = None,
     ) -> DeviceAwareBlockAllocator:
         """Creates a CpuGpuBlockAllocator instance with the specified
         configuration.
@@ -64,6 +79,7 @@ class CpuGpuBlockAllocator(DeviceAwareBlockAllocator):
         cpu_block_ids = block_ids[num_gpu_blocks:]
 
         if allocator_type == "naive":
+            assert event_manager is None, "Event API not supported with naive allocator."
             gpu_allocator: BlockAllocator = NaiveBlockAllocator(
                 create_block=NaiveBlock,  # type: ignore
                 num_blocks=num_gpu_blocks,
@@ -82,12 +98,14 @@ class CpuGpuBlockAllocator(DeviceAwareBlockAllocator):
                 num_blocks=num_gpu_blocks,
                 block_size=block_size,
                 block_ids=gpu_block_ids,
+                event_manager=event_manager,
             )
 
             cpu_allocator = PrefixCachingBlockAllocator(
                 num_blocks=num_cpu_blocks,
                 block_size=block_size,
                 block_ids=cpu_block_ids,
+                event_manager=event_manager,
             )
         else:
             raise ValueError(f"Unknown allocator type {allocator_type=}")
@@ -95,10 +113,12 @@ class CpuGpuBlockAllocator(DeviceAwareBlockAllocator):
         return CpuGpuBlockAllocator(
             cpu_block_allocator=cpu_allocator,
             gpu_block_allocator=gpu_allocator,
+            event_manager=event_manager,
         )
 
     def __init__(self, cpu_block_allocator: BlockAllocator,
-                 gpu_block_allocator: BlockAllocator):
+                 gpu_block_allocator: BlockAllocator,
+                 event_manager: Optional[KVCacheEventManager] = None,):
         assert not (
             cpu_block_allocator.all_block_ids
             & gpu_block_allocator.all_block_ids
@@ -108,6 +128,7 @@ class CpuGpuBlockAllocator(DeviceAwareBlockAllocator):
             Device.CPU: cpu_block_allocator,
             Device.GPU: gpu_block_allocator,
         }
+        self.event_manager = event_manager
 
         self._swap_mapping: Dict[int, int] = {}
         self._null_block: Optional[Block] = None
diff --git a/vllm/core/block/naive_block.py b/vllm/core/block/naive_block.py
index c388366b8..3c223b519 100644
--- a/vllm/core/block/naive_block.py
+++ b/vllm/core/block/naive_block.py
@@ -1,8 +1,21 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 from collections import deque
 from typing import Deque, FrozenSet, Iterable, List, Optional, Tuple, Union
-
+import heapq
 from vllm.core.block.common import (BlockPool, CopyOnWriteTracker, RefCounter,
                                     get_all_blocks_recursively)
 from vllm.core.block.interfaces import Block, BlockAllocator, BlockId, Device
@@ -38,7 +51,7 @@ class NaiveBlockAllocator(BlockAllocator):
         if block_ids is None:
             block_ids = range(num_blocks)
 
-        self._free_block_indices: Deque[BlockId] = deque(block_ids)
+        self._free_block_indices: List[BlockId] = list(block_ids)
         self._all_block_indices = frozenset(block_ids)
         assert len(self._all_block_indices) == num_blocks
 
@@ -134,7 +147,8 @@ class NaiveBlockAllocator(BlockAllocator):
         if not self._free_block_indices:
             raise BlockAllocator.NoFreeBlocksError()
 
-        block_id = self._free_block_indices.popleft()
+        block_id = heapq.heappop(self._free_block_indices)
+        # TODO: figure out why sometime block_id is None
         self._refcounter.incr(block_id)
         return block_id
 
@@ -148,7 +162,7 @@ class NaiveBlockAllocator(BlockAllocator):
 
         refcount = self._refcounter.decr(block_id)
         if refcount == 0:
-            self._free_block_indices.appendleft(block_id)
+            heapq.heappush(self._free_block_indices, block_id)
 
     def free(self, block: Block, keep_block_object: bool = False) -> None:
         # Release the physical block id
diff --git a/vllm/core/block/prefix_caching_block.py b/vllm/core/block/prefix_caching_block.py
index 1ca9e49da..26fabb243 100644
--- a/vllm/core/block/prefix_caching_block.py
+++ b/vllm/core/block/prefix_caching_block.py
@@ -1,10 +1,23 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 """Token blocks."""
 import sys
 from bisect import bisect_left
 from os.path import commonprefix
 from typing import (Callable, Dict, FrozenSet, Iterable, List, Optional, Set,
-                    Tuple)
+                    Tuple, TYPE_CHECKING)
 
 from vllm.core.block.common import (CacheMetricData, CopyOnWriteTracker,
                                     get_all_blocks_recursively)
@@ -23,6 +36,9 @@ PrefixHash = int
 # then we know this block hasn't been accessed yet.
 _DEFAULT_LAST_ACCESSED_TIME = -1
 
+if TYPE_CHECKING:
+    from vllm.core.event_manager import KVCacheEventManager
+
 logger = init_logger(__name__)
 
 
@@ -80,6 +96,7 @@ class PrefixCachingBlockAllocator(BlockAllocator):
         block_size: int,
         block_ids: Optional[Iterable[int]] = None,
         eviction_policy: EvictionPolicy = EvictionPolicy.LRU,
+        event_manager: Optional["KVCacheEventManager"] = None,
     ):
         if block_ids is None:
             block_ids = range(num_blocks)
@@ -131,6 +148,9 @@ class PrefixCachingBlockAllocator(BlockAllocator):
 
         self.metric_data = CacheMetricData()
 
+        self.event_manager = event_manager
+
+    # Implements Block.Factory.
     def _create_block(
         self,
         prev_block: Optional[Block],
@@ -337,6 +357,9 @@ class PrefixCachingBlockAllocator(BlockAllocator):
         assert self._refcounter.get(_block_id) == 0
         assert _block_id == block_id
 
+        if self.event_manager:
+            self.event_manager.enqueue_removed_event(content_hash_to_evict)
+
         self._cached_blocks.pop(content_hash_to_evict)
 
         self._refcounter.incr(block_id)
@@ -513,6 +536,10 @@ class PrefixCachingBlockAllocator(BlockAllocator):
             # Mark this block as touched so that it can be marked as
             # computed after the entire batch of sequences are scheduled.
             self._touched_blocks.add(block.block_id)
+
+            if self.event_manager:
+                self.event_manager.enqueue_stored_event(block.prev_block, block)
+
             return block.block_id
 
         # Reuse the cached content hash
@@ -579,9 +606,11 @@ class PrefixCachingBlockAllocator(BlockAllocator):
 
     def mark_blocks_as_computed(self, block_ids: List[int]) -> None:
         # Mark all touched blocks as computed.
-        for block_id in self._touched_blocks:
-            self._block_tracker[block_id].computed = True
-        self._touched_blocks.clear()
+        for block_id in block_ids:
+            if block_id in self._touched_blocks:
+                logger.debug("Mark block as computed: %s", block_id)
+                self._block_tracker[block_id].computed = True
+                self._touched_blocks.remove(block_id)
 
     def _track_block_id(self, block_id: Optional[BlockId],
                         computed: bool) -> None:
diff --git a/vllm/core/block_manager.py b/vllm/core/block_manager.py
index c6bf6d163..c5514f935 100644
--- a/vllm/core/block_manager.py
+++ b/vllm/core/block_manager.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 """A block manager that manages token blocks."""
 from typing import Dict, List, Optional
 from typing import Sequence as GenericSequence
@@ -10,7 +23,10 @@ from vllm.core.block.interfaces import Block
 from vllm.core.block.prefix_caching_block import (ComputedBlocksTracker,
                                                   LastAccessBlocksTracker)
 from vllm.core.block.utils import check_no_caching_or_swa_for_blockmgr_encdec
+from vllm.core.event_manager import KVCacheEventManager
 from vllm.core.interfaces import AllocStatus, BlockSpaceManager
+from vllm.envs import (VLLM_KV_CAPI_PATH, VLLM_KV_COMPONENT, VLLM_KV_NAMESPACE,
+                       VLLM_WORKER_ID)
 from vllm.sequence import Sequence, SequenceGroup, SequenceStatus
 from vllm.utils import Device
 
@@ -60,6 +76,7 @@ class SelfAttnBlockSpaceManager(BlockSpaceManager):
 
     def __init__(
         self,
+        model_name: str,
         block_size: int,
         num_gpu_blocks: int,
         num_cpu_blocks: int,
@@ -91,11 +108,29 @@ class SelfAttnBlockSpaceManager(BlockSpaceManager):
 
         self.watermark_blocks = int(watermark * num_gpu_blocks)
 
+        kv_event_manager_params = [
+            VLLM_WORKER_ID, VLLM_KV_CAPI_PATH, VLLM_KV_NAMESPACE,
+            VLLM_KV_COMPONENT
+        ]
+        set_kv_event_manager_params = len(
+            [param for param in kv_event_manager_params if param is not None])
+
+        if set_kv_event_manager_params == len(kv_event_manager_params):
+            self.event_manager = KVCacheEventManager(
+                namespace=VLLM_KV_NAMESPACE,
+                component=VLLM_KV_COMPONENT,
+                worker_id=VLLM_WORKER_ID,
+                lib_path=VLLM_KV_CAPI_PATH,
+                kv_block_size=block_size)
+        else:
+            self.event_manager = None
+
         self.block_allocator = CpuGpuBlockAllocator.create(
             allocator_type="prefix_caching" if enable_caching else "naive",
             num_gpu_blocks=num_gpu_blocks,
             num_cpu_blocks=num_cpu_blocks,
             block_size=block_size,
+            event_manager=self.event_manager,
         )
 
         self.block_tables: Dict[SeqId, BlockTable] = {}
@@ -108,7 +143,8 @@ class SelfAttnBlockSpaceManager(BlockSpaceManager):
 
     def can_allocate(self,
                      seq_group: SequenceGroup,
-                     num_lookahead_slots: int = 0) -> AllocStatus:
+                     num_lookahead_slots: int = 0,
+                     is_remote_decode: bool = False) -> AllocStatus:
         # FIXME(woosuk): Here we assume that all sequences in the group share
         # the same prompt. This may not be true for preempted sequences.
 
@@ -121,6 +157,10 @@ class SelfAttnBlockSpaceManager(BlockSpaceManager):
             num_lookahead_slots=num_lookahead_slots,
         )
 
+        # if remote decode, we need to allocate twice as many blocks for staging
+        if is_remote_decode: 
+            num_required_blocks *= 2
+
         if seq_group.is_encoder_decoder():
             encoder_seq = seq_group.get_encoder_seq()
             assert encoder_seq is not None
diff --git a/vllm/core/event_manager.py b/vllm/core/event_manager.py
new file mode 100644
index 000000000..79eb8db67
--- /dev/null
+++ b/vllm/core/event_manager.py
@@ -0,0 +1,121 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+import ctypes
+import logging
+import uuid
+from ctypes import c_char_p, c_size_t, c_uint32, c_void_p, c_int64
+from typing import Optional
+
+from vllm.core.block.prefix_caching_block import PrefixCachingBlock, PrefixHash
+
+logger = logging.getLogger(__name__)
+
+
+class DynamoResult:
+    OK = 0
+    ERR = 1
+
+
+class KVCacheEventManager:
+
+    def __init__(self, namespace: str, component: str, worker_id: int,
+                 lib_path: str, kv_block_size: int):
+        self.lib = None
+
+        try:
+            self.lib = ctypes.CDLL(lib_path)
+            self.lib.dynamo_llm_init.argtypes = [
+                c_char_p,
+                c_char_p,
+                c_int64,
+                c_uint32,
+            ]
+            self.lib.dynamo_llm_init.restype = c_uint32
+
+            result = self.lib.dynamo_llm_init(
+                namespace.encode(), component.encode(), worker_id, kv_block_size
+            )
+            if result == DynamoResult.OK:
+                logger.info(
+                    "KVCacheEventManager initialized successfully. Ready to publish KV Cache Events"
+                )
+            else:
+                logger.info("KVCacheEventManager initialization failed!")
+
+        except Exception as e:
+            print(f"Failed to load {lib_path}")
+            raise e
+
+        self.lib.dynamo_kv_event_publish_stored.argtypes = [
+            ctypes.c_uint64,  # event_id
+            ctypes.POINTER(ctypes.c_uint32),  # token_ids
+            ctypes.POINTER(ctypes.c_size_t),  # num_block_tokens
+            ctypes.POINTER(ctypes.c_uint64),  # block_ids
+            ctypes.c_size_t,  # num_blocks
+            ctypes.POINTER(ctypes.c_uint64),  # parent_hash
+            ctypes.c_uint64,  # lora_id
+        ]
+        self.lib.dynamo_kv_event_publish_stored.restype = ctypes.c_uint32  # dynamo_llm_result_t
+
+        self.lib.dynamo_kv_event_publish_removed.argtypes = [
+            ctypes.c_uint64,  # event_id
+            ctypes.POINTER(ctypes.c_uint64),  # block_ids
+            ctypes.c_size_t,  # num_blocks
+        ]
+        self.lib.dynamo_kv_event_publish_removed.restype = ctypes.c_uint32  # dynamo_llm_result_t
+
+        self.event_id_counter = 0
+
+    def enqueue_stored_event(self, parent: Optional[PrefixCachingBlock],
+                             block: PrefixCachingBlock):
+        token_ids_arr = (ctypes.c_uint32 *
+                         len(block.token_ids))(*block.token_ids)
+        num_block_tokens = (ctypes.c_size_t * 1)(len(block.token_ids))
+        block_hash = (ctypes.c_uint64 * 1)(block.content_hash)
+        parent_hash = ((ctypes.c_uint64 * 1)(parent.content_hash)
+                       if parent is not None else None)
+
+        # Publish the event
+        result = self.lib.dynamo_kv_event_publish_stored(
+            self.event_id_counter,  # uint64_t event_id
+            token_ids_arr,  # const uint32_t *token_ids
+            num_block_tokens,  # const uintptr_t *num_block_tokens
+            block_hash,  # const uint64_t *block_ids
+            1,  # uintptr_t num_blocks
+            parent_hash,  # const uint64_t *parent_hash
+            0,  # uint64_t lora_id
+        )
+
+        if result == DynamoResult.OK:
+            logger.debug(f"Store - Published KV Event: {block.content_hash}")
+        else:
+            logger.debug(
+                f"Store - Failed to Publish KV Event: {block.content_hash}")
+
+        self.event_id_counter += 1
+
+    def enqueue_removed_event(self, block_hash: PrefixHash):
+        result = self.lib.dynamo_kv_event_publish_removed(
+            self.event_id_counter,
+            (ctypes.c_uint64 * 1)(block_hash),
+            1,
+        )
+
+        if result == DynamoResult.OK:
+            logger.debug(f"Remove - Published KV Event: {block_hash}")
+        else:
+            logger.debug(f"Remove - Failed to Publish KV Event: {block_hash}")
+
+        self.event_id_counter += 1
diff --git a/vllm/core/scheduler.py b/vllm/core/scheduler.py
index cf85a2135..f9087b5c3 100644
--- a/vllm/core/scheduler.py
+++ b/vllm/core/scheduler.py
@@ -1,16 +1,30 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import enum
 import os
 import random
 import time
+import copy
 from collections import deque
 from dataclasses import dataclass, field
 from typing import Callable, Deque, Dict, Iterable, List, Optional
 from typing import Sequence as GenericSequence
-from typing import Set, Tuple, Union
+from typing import Set, Tuple, Union, Any
 
-from vllm.config import CacheConfig, LoRAConfig, SchedulerConfig
+from vllm.config import ModelConfig, CacheConfig, LoRAConfig, SchedulerConfig
 from vllm.core.interfaces import AllocStatus, BlockSpaceManager
 from vllm.logger import init_logger
 from vllm.lora.request import LoRARequest
@@ -20,7 +34,6 @@ from vllm.sequence import (Sequence, SequenceData, SequenceGroup,
                            SequenceGroupMetadataDelta, SequenceStage,
                            SequenceStatus)
 from vllm.utils import Device, PyObjectCache
-
 logger = init_logger(__name__)
 
 # Test-only. If configured, decode is preempted with
@@ -292,6 +305,7 @@ class SchedulerPrefillOutputs:
     # Ignored sequence groups.
     ignored_seq_groups: List[SequenceGroup]
     num_lookahead_slots: int
+    num_remote_prefill_groups: int
 
     @classmethod
     def create_empty(cls) -> "SchedulerPrefillOutputs":
@@ -299,6 +313,7 @@ class SchedulerPrefillOutputs:
             seq_groups=[],
             ignored_seq_groups=[],
             num_lookahead_slots=0,
+            num_remote_prefill_groups=0,
         )
 
 
@@ -426,12 +441,14 @@ class Scheduler:
 
     def __init__(
         self,
+        model_config: ModelConfig,
         scheduler_config: SchedulerConfig,
         cache_config: CacheConfig,
         lora_config: Optional[LoRAConfig],
         pipeline_parallel_size: int = 1,
         output_proc_callback: Optional[Callable] = None,
     ) -> None:
+        self.model_config = model_config
         self.scheduler_config = scheduler_config
         self.cache_config = cache_config
         # Note for LoRA scheduling: the current policy is extremely
@@ -457,6 +474,7 @@ class Scheduler:
 
         # Create the block space manager.
         self.block_manager = BlockSpaceManagerImpl(
+            model_name=self.model_config.served_model_name,
             block_size=self.cache_config.block_size,
             num_gpu_blocks=num_gpu_blocks,
             num_cpu_blocks=num_cpu_blocks,
@@ -473,6 +491,16 @@ class Scheduler:
         # Sequence groups in the SWAPPED state.
         # Contain decode requests that are swapped out.
         self.swapped: Deque[SequenceGroup] = deque()
+
+        # Sequence groups in the REMOTE_PREFILLING state.
+        # Contain requests that are being prefilled by a remote worker.
+        self.remote_prefilling: Deque[SequenceGroup] = deque()
+        # Contain requests that are being prefilled by a local worker.
+        self.prefill_sending: Deque[SequenceGroup] = deque()
+
+        self._remote_prefill_outputs: Dict[str, int] = {}
+
+
         # Sequence groups finished requests ids since last step iteration.
         # It lets the model know that any state associated with these requests
         # can and must be released after the current step.
@@ -628,8 +656,8 @@ class Scheduler:
             self.block_manager.free_cross(seq_group)
 
     def has_unfinished_seqs(self) -> bool:
-        return (len(self.waiting) != 0 or len(self.running) != 0
-                or len(self.swapped) != 0)
+        return len(self.waiting) != 0 or len(self.running) != 0 or len(
+            self.swapped) != 0 or len(self.remote_prefilling) != 0 or len(self.prefill_sending) != 0
 
     def get_prefix_cache_hit_rate(self, device: Device) -> float:
         return self.block_manager.get_prefix_cache_hit_rate(device)
@@ -652,6 +680,8 @@ class Scheduler:
         curr_loras: Optional[Set[int]],
         enable_chunking: bool = False,
         partial_prefill_metadata: Optional[PartialPrefillMetadata] = None,
+        finished_prefills: Optional[Set[str]] = None,
+        finished_transfers: Optional[Set[str]] = None,
     ) -> SchedulerRunningOutputs:
         """Schedule sequence groups that are running.
 
@@ -669,6 +699,9 @@ class Scheduler:
             partial_prefill_metadata: information about the partial prefills
             that are currently running
 
+            finished_remote_prefill_request_ids: Set of request ids of remote
+                prefills that have finished.
+    
         Returns:
             SchedulerRunningOutputs.
         """
@@ -697,6 +730,38 @@ class Scheduler:
         preempted: List[SequenceGroup] = ret.preempted
         swapped_out: List[SequenceGroup] = ret.swapped_out
 
+        remote_prefilling_queue = self.remote_prefilling
+        leftover_remote_prefilling_sequences: Deque[SequenceGroup] = deque()
+        while remote_prefilling_queue:
+            seq_group = remote_prefilling_queue.popleft()
+            if seq_group.request_id not in finished_prefills:
+                leftover_remote_prefilling_sequences.append(seq_group)
+                continue
+                
+            else:
+                finished_prefills.remove(seq_group.request_id)
+                assert len(seq_group.seqs) == 1
+                seq = seq_group.seqs[0]
+                # we computed all but the last token in prefill, we need to decode the first token on decode
+                seq_group.update_num_computed_tokens(seq.get_len() - 1)
+                seq.status = SequenceStatus.RUNNING
+                seq.data._stage = SequenceStage.DECODE
+                self.running.appendleft(seq_group)
+        remote_prefilling_queue.extendleft(leftover_remote_prefilling_sequences)
+
+        remote_transfers_queue = self.prefill_sending
+        leftover_remote_transfers_sequences: Deque[SequenceGroup] = deque()
+        while remote_transfers_queue:
+            seq_group = remote_transfers_queue.popleft()
+            if seq_group.request_id not in finished_transfers:
+                leftover_remote_transfers_sequences.append(seq_group)
+            else:
+                finished_transfers.remove(seq_group.request_id)
+                assert len(seq_group.seqs) == 1
+                seq = seq_group.seqs[0]
+                self.free_seq(seq)
+        remote_transfers_queue.extendleft(leftover_remote_transfers_sequences)
+
         running_queue = self.running
         assert len(self._async_stopped) == 0
         while running_queue:
@@ -1073,6 +1138,7 @@ class Scheduler:
         seq_groups: List[ScheduledSequenceGroup] = []
 
         waiting_queue = self.waiting
+        num_remote_prefill_groups = 0
 
         leftover_waiting_sequences: Deque[SequenceGroup] = deque()
         while self._passed_delay(time.time()) and waiting_queue:
@@ -1121,8 +1187,10 @@ class Scheduler:
                     True, enable_chunking)
 
             # If the sequence group cannot be allocated, stop.
+            is_remote_decode = seq_group.remote_prefill_params is not None and seq_group.remote_prefill_params.is_remote_decode
             can_allocate = self.block_manager.can_allocate(
-                seq_group, num_lookahead_slots=num_lookahead_slots)
+                seq_group, num_lookahead_slots=num_lookahead_slots,
+                is_remote_decode=is_remote_decode)
             if can_allocate == AllocStatus.LATER:
                 break
             elif can_allocate == AllocStatus.NEVER:
@@ -1170,7 +1238,18 @@ class Scheduler:
             if curr_loras is not None and lora_int_id > 0:
                 curr_loras.add(lora_int_id)
             waiting_queue.popleft()
-            self._allocate_and_set_running(seq_group)
+
+            seq_group_copy = copy.deepcopy(seq_group)
+            seq_group_copy.seqs[0].seq_id = seq_group.seqs[0].seq_id + 1
+
+            logger.debug("Allocating and setting running or remote prefill for seq_group %s", seq_group.request_id)
+            logger.debug("Seq id: %s", seq_group.seqs[0].seq_id)
+            is_remote_prefill = self._allocate_and_set_running_or_remote_prefill(seq_group)
+            num_remote_prefill_groups += is_remote_prefill
+            if is_remote_decode:
+                logger.debug("Seq id: %s", seq_group_copy.seqs[0].seq_id)
+                self._allocate_and_set_running_or_remote_prefill(seq_group_copy)
+                self.prefill_sending.append(seq_group_copy)
 
             if partial_prefill_metadata is not None:
                 partial_prefill_metadata.maybe_increment_partial_prefills(
@@ -1214,9 +1293,10 @@ class Scheduler:
             ignored_seq_groups=ignored_seq_groups,
             num_lookahead_slots=self._get_num_lookahead_slots(
                 is_prefill=True, enable_chunking=enable_chunking),
+            num_remote_prefill_groups=num_remote_prefill_groups
         )
 
-    def _schedule_default(self) -> SchedulerOutputs:
+    def _schedule_default(self, finished_prefills: Optional[Set[str]] = None, finished_transfers: Optional[Set[str]] = None) -> SchedulerOutputs:
         """Schedule queued requests.
 
         The current policy is designed to optimize the throughput. First,
@@ -1234,6 +1314,9 @@ class Scheduler:
         for seq_group in self.running:
             budget.add_num_seqs(seq_group.request_id,
                                 seq_group.get_max_num_running_seqs())
+        for seq_group in self.remote_prefilling:
+            budget.add_num_seqs(seq_group.request_id,
+                                seq_group.get_max_num_running_seqs())
         curr_loras = (set(
             seq_group.lora_int_id for seq_group in self.running
             if seq_group.lora_int_id > 0) if self.lora_enabled else None)
@@ -1258,7 +1341,9 @@ class Scheduler:
         if len(prefills.seq_groups) == 0:
             running_scheduled = self._schedule_running(budget,
                                                        curr_loras,
-                                                       enable_chunking=False)
+                                                       enable_chunking=False,
+                                                       finished_prefills=finished_prefills,
+                                                       finished_transfers=finished_transfers)
 
             # If any sequence group is preempted, do not swap in any sequence
             # group. because it means there's no slot for new running requests.
@@ -1275,7 +1360,12 @@ class Scheduler:
         self.waiting.extendleft(running_scheduled.preempted)
         # Update new running requests.
         if len(prefills.seq_groups) > 0:
-            self.running.extend([s.seq_group for s in prefills.seq_groups])
+            for s in prefills.seq_groups:
+                seq_group = s.seq_group
+                if seq_group.remote_prefill_params is not None and seq_group.remote_prefill_params.is_remote_prefill:
+                    self.remote_prefilling.append(seq_group)
+                else:
+                    self.running.append(seq_group)
 
         self.running.extend(running_scheduled.decode_seq_groups_list)
 
@@ -1452,12 +1542,14 @@ class Scheduler:
         ]
         return finishing + not_finishing
 
-    def _schedule(self) -> SchedulerOutputs:
+    def _schedule(self, finished_prefills: Optional[Set[str]] = None, finished_transfers: Optional[Set[str]] = None) -> SchedulerOutputs:
         """Schedule queued requests."""
         if self.scheduler_config.chunked_prefill_enabled:
+            if finished_prefills or finished_transfers:
+                raise ValueError("Chunked prefill does not support remote prefills")
             return self._schedule_chunked_prefill()
         else:
-            return self._schedule_default()
+            return self._schedule_default(finished_prefills, finished_transfers)
 
     def _can_append_slots(self, seq_group: SequenceGroup,
                           enable_chunking: bool) -> bool:
@@ -1491,14 +1583,16 @@ class Scheduler:
         return no_single_seq
 
     def schedule(
-            self
+            self,
+            finished_prefills: Optional[Set[str]] = None,
+            finished_transfers: Optional[Set[str]] = None
     ) -> Tuple[List[SequenceGroupMetadata], SchedulerOutputs, bool]:
         # Schedule sequence groups.
         # This function call changes the internal states of the scheduler
         # such as self.running, self.swapped, and self.waiting.
-        scheduler_start_time = time.perf_counter()
 
-        scheduler_outputs: SchedulerOutputs = self._schedule()
+        scheduler_start_time = time.perf_counter()
+        scheduler_outputs: SchedulerOutputs = self._schedule(finished_prefills, finished_transfers)
         now = time.time()
 
         if not self.cache_config.enable_prefix_caching:
@@ -1537,7 +1631,8 @@ class Scheduler:
                 encoder_seq_data = None
                 cross_block_table = None
 
-            for seq in seq_group.get_seqs(status=SequenceStatus.RUNNING):
+            running_or_remote_prefilling_seqs = seq_group.get_seqs(status=SequenceStatus.RUNNING) + seq_group.get_seqs(status=SequenceStatus.REMOTE_PREFILLING)
+            for seq in running_or_remote_prefilling_seqs:
                 seq_id = seq.seq_id
                 seq_data[seq_id] = seq.data
                 block_tables[seq_id] = self.block_manager.get_block_table(seq)
@@ -1546,7 +1641,9 @@ class Scheduler:
             if self.cache_config.enable_prefix_caching:
                 common_computed_block_nums = (
                     self.block_manager.get_common_computed_block_ids(
-                        seq_group.get_seqs(status=SequenceStatus.RUNNING)))
+                        running_or_remote_prefilling_seqs
+                    )
+                )
 
             do_sample = True
             is_prompt = seq_group.is_prefill()
@@ -1568,9 +1665,30 @@ class Scheduler:
                         < seqs[0].data.get_len()):
                     do_sample = False
 
+            is_remote_prefill = False
+            if is_first_prefill and seq_group.remote_prefill_params is not None and seq_group.remote_prefill_params.is_remote_prefill:
+                is_remote_prefill = True
+                logger.debug("Remote prefill, computed block nums: %s", common_computed_block_nums)
+            if is_first_prefill and seq_group.remote_prefill_params is not None and seq_group.remote_prefill_params.is_remote_decode:
+                block_tables[seq_group.seqs[0].seq_id + 1] = self.block_manager.block_tables[seq.seq_id + 1].physical_block_ids
+
+                # Since we know that prefill is scheduled we can
+                # assume that the blocks computed on decode
+                # will be fetched by the time we run prefill
+                logger.debug("Computed decode blocks: %s", seq_group.remote_prefill_params.decode_computed_block_ids)
+                if seq_group.remote_prefill_params.decode_computed_block_ids:
+                    computed_block_ids = set(seq_group.remote_prefill_params.decode_computed_block_ids)
+                    prefill_block_ids = block_tables[seq_group.seqs[0].seq_id]
+                    prefill_fetched_block_ids = [prefill_block_ids[i] for i, block_id in enumerate(seq_group.remote_prefill_params.decode_block_ids) if block_id in computed_block_ids and i < len(prefill_block_ids)]
+                    
+                    assert len(common_computed_block_nums) == 0, "common_computed_block_nums should be empty for remote prefill as it doesn't suport prefix caching"
+                    common_computed_block_nums = prefill_fetched_block_ids
+
+
             # It assumes the scheduled_seq_groups is ordered by
             # prefill < decoding.
             if is_first_prefill or not self.scheduler_config.send_delta_data:
+                logger.debug("Assinged blocks: %s", block_tables)
                 seq_group_metadata = SequenceGroupMetadata(
                     request_id=seq_group.request_id,
                     is_prompt=is_prompt,
@@ -1598,6 +1716,7 @@ class Scheduler:
                         if scheduler_outputs.num_prefill_groups > 0 else None),
                     mm_processor_kwargs=seq_group.mm_processor_kwargs,
                     prompt_adapter_request=seq_group.prompt_adapter_request,
+                    do_remote_prefill=is_remote_prefill,
                 )
             else:
                 # When SPMD mode is enabled, we only send delta data except for
@@ -1696,10 +1815,16 @@ class Scheduler:
 
             self._async_stopped.clear()
 
-    def _allocate_and_set_running(self, seq_group: SequenceGroup) -> None:
+    def _allocate_and_set_running_or_remote_prefill(self, seq_group: SequenceGroup) -> bool:
         self.block_manager.allocate(seq_group)
+        is_remote_prefill = False
         for seq in seq_group.get_seqs(status=SequenceStatus.WAITING):
-            seq.status = SequenceStatus.RUNNING
+            if seq_group.remote_prefill_params is not None and seq_group.remote_prefill_params.is_remote_prefill:
+                seq.status = SequenceStatus.REMOTE_PREFILLING
+                is_remote_prefill = True
+            else:
+                seq.status = SequenceStatus.RUNNING
+        return is_remote_prefill
 
     def _append_slots(
         self,
diff --git a/vllm/distributed/device_communicators/kv_rearrange.py b/vllm/distributed/device_communicators/kv_rearrange.py
new file mode 100644
index 000000000..a2f9ce99e
--- /dev/null
+++ b/vllm/distributed/device_communicators/kv_rearrange.py
@@ -0,0 +1,125 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import torch
+import triton
+import triton.language as tl
+
+@triton.jit
+def rearrange_kernel_read(
+    t1_ptr,
+    t2_ptr,
+    N,
+    B,
+    H,
+    C,
+    d,
+    tensor_subset_size,
+    block_size,
+    token_size,
+    BLOCK_SIZE: tl.constexpr,
+):
+    pid = tl.program_id(0)
+    
+    block_start = pid * BLOCK_SIZE
+    offsets = block_start + tl.arange(0, BLOCK_SIZE)
+
+    curr_n = offsets // block_size
+    curr_b = offsets // token_size % B
+    curr_h = offsets // C % H 
+    curr_c = offsets % C
+
+    src_pos = offsets
+
+    tp_group = curr_h * d // H
+    dst_h = curr_h % (H // d)
+    tp_group_offset = curr_n * (block_size // d) + curr_b * (H // d) * C + dst_h * C + curr_c
+
+    dst_pos = tensor_subset_size * tp_group + tp_group_offset
+    
+    tl.store(t1_ptr + src_pos, tl.load(t2_ptr + dst_pos))
+
+@triton.jit
+def rearrange_kernel_write(
+    t1_ptr,
+    t2_ptr,
+    N,
+    B,
+    H,
+    C,
+    d,
+    tensor_subset_size,
+    block_size,
+    token_size,
+    BLOCK_SIZE: tl.constexpr,
+):
+    pid = tl.program_id(0)
+    
+    block_start = pid * BLOCK_SIZE
+    offsets = block_start + tl.arange(0, BLOCK_SIZE)
+
+    curr_n = offsets // block_size
+    curr_b = offsets // token_size % B
+    curr_h = offsets // C % H 
+    curr_c = offsets % C
+
+    src_pos = offsets
+
+    tp_group = curr_h * d // H
+    dst_h = curr_h % (H // d)
+    tp_group_offset = curr_n * (block_size // d) + curr_b * (H // d) * C + dst_h * C + curr_c
+
+    dst_pos = tensor_subset_size * tp_group + tp_group_offset
+    
+    tl.store(t2_ptr + dst_pos, tl.load(t1_ptr + src_pos))
+    
+
+
+def rearrange_tensors(t1: torch.Tensor, t2: torch.Tensor, d: int, direction: str):
+    N, B, H, C = t1.shape
+    
+    assert t2.shape == (N, B, H, C), "Destination tensor must have same shape as source"
+    assert H % d == 0, "H must be divisible by d"
+
+    block_size = B * H * C
+    token_size = H * C
+    tensor_size = N * block_size
+    tensor_subset_size = tensor_size // d
+    
+    BLOCK_SIZE = 1024
+    grid = ((N * B * H * C + BLOCK_SIZE - 1) // BLOCK_SIZE,)
+    
+    if direction == "read":
+        rearrange_kernel_read[grid](
+            t1, t2,
+            N, B, H, C,
+            d,
+            tensor_subset_size,
+            block_size,
+            token_size,
+            BLOCK_SIZE=BLOCK_SIZE
+        )
+    elif direction == "write":
+        rearrange_kernel_write[grid](
+            t1, t2,
+            N, B, H, C,
+            d,
+            tensor_subset_size,
+            block_size,
+            token_size,
+            BLOCK_SIZE=BLOCK_SIZE
+        )
+    else:
+        raise ValueError(f"Invalid direction: {direction}")
\ No newline at end of file
diff --git a/vllm/distributed/device_communicators/nixl.py b/vllm/distributed/device_communicators/nixl.py
new file mode 100644
index 000000000..4c5ed707f
--- /dev/null
+++ b/vllm/distributed/device_communicators/nixl.py
@@ -0,0 +1,447 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import torch
+from typing import List, Tuple
+from vllm.config import VllmConfig
+from vllm.logger import init_logger
+import msgspec
+import time
+import uuid
+from collections import defaultdict
+from .kv_rearrange import rearrange_tensors
+
+logger = init_logger(__name__)
+
+# Lazy import nixl_wrapper to avoid loading nixl_bindings if nixl is not used
+try:
+    from nixl._api import nixl_agent as NixlWrapper
+    logger.info("NIXL is available")
+except ImportError:
+    logger.warning("NIXL is not available")
+    NixlWrapper = None
+
+class NixlMetadata(
+        msgspec.Struct,
+        omit_defaults=True,  # type: ignore[call-arg]
+        # required for @cached_property.
+        dict=True):
+    engine_id: str
+    agent_metadata: List[bytes]
+    kv_caches_base_addr: List[List[List[int]]] # base address for each rank for each layer for keys and values
+    num_blocks: int
+
+
+class DynamoNixlConnector:
+    def __init__(self, vllm_config: VllmConfig, engine_id: str, rank: int):
+        self.vllm_config = vllm_config
+        if NixlWrapper is None:
+            logger.error("NIXL is not available")
+            raise RuntimeError("NIXL is not available")
+        logger.info("Initializing NIXL wrapper")
+        self.nixl_wrapper = NixlWrapper(str(uuid.uuid4()), None)
+
+        self.use_prepped_xfer = vllm_config.kv_transfer_config.use_prepped_xfer
+
+        self.num_layers = None
+        self.num_blocks = None
+        self.num_heads = None
+        self.block_len = None
+        self.kv_caches = None
+        self.kv_caches_base_addr = {}
+        self.kv_cache_shape = {}
+
+        self._registered_descs = []
+        self._remote_agents = {}
+        self.engine_id = engine_id
+        self.rank = rank
+        self._tp_size = {}
+        self.src_xfer_side_handles = {}
+        self.dst_xfer_side_handles = defaultdict(dict)
+        self.dst_num_blocks = {}
+
+        self._transfers = defaultdict(list)
+
+
+        self._tp_size[engine_id] = vllm_config.parallel_config.tensor_parallel_size
+        self._is_mla = "deepseek" in vllm_config.model_config.architectures[0].lower()
+        
+
+    @property
+    def agent_name(self):
+        return self.nixl_wrapper.name
+
+    def register_kv_caches(self, kv_caches: List[torch.Tensor]):
+        logger.debug("--------------------------------")
+        logger.debug("Registering kv caches for engine %s", self.engine_id)
+        logger.debug(f"Is deepseek: {self._is_mla}")
+        logger.debug(f"kv_cache shape: {kv_caches[0].shape}")
+        logger.debug("--------------------------------")
+
+        if self._is_mla:
+            num_blocks, block_size, head_dim = kv_caches[0].shape
+            self.block_len = head_dim * block_size * kv_caches[0].element_size()
+            logger.debug("Per layer kv cache size: %s", kv_caches[0].shape)
+            self.num_layers = len(kv_caches)
+            self.num_blocks = num_blocks
+            self.num_heads = 1
+            self.kv_caches = kv_caches
+            self.num_cache_entries = 1
+
+            kv_caches_base_addr = []
+            caches_data = []
+            for kv_cache in kv_caches:
+                base_addr = kv_cache.data_ptr()
+                region_len = self.num_cache_entries * num_blocks * self.block_len
+                caches_data.append((base_addr, region_len, self.rank, ""))
+                kv_caches_base_addr.append([base_addr,])
+
+            self.kv_caches_base_addr[self.engine_id] = kv_caches_base_addr
+
+            descs = self.nixl_wrapper.get_reg_descs(caches_data, "VRAM")
+            logger.debug("Registering descs: %s", caches_data)
+            self.nixl_wrapper.register_memory(descs)
+            self._registered_descs.append(descs)
+        else:
+            _, num_blocks, block_size, num_heads, head_dim = kv_caches[0].shape
+            self.block_len = block_size * num_heads * head_dim * kv_caches[0].element_size()
+            logger.debug("Per layer kv cache size: %s", kv_caches[0].shape)
+            self.num_layers = len(kv_caches)
+            self.num_blocks = num_blocks
+            self.num_heads = num_heads
+            self.kv_caches = kv_caches
+            self.num_cache_entries = 2
+            kv_caches_base_addr = []
+            caches_data = []
+            for key_cache, value_cache in kv_caches:
+                base_addr = key_cache.data_ptr()
+                region_len = self.num_cache_entries * num_blocks * self.block_len
+                caches_data.append((base_addr, region_len, self.rank, ""))
+                kv_caches_base_addr.append([key_cache.data_ptr(), value_cache.data_ptr()])
+
+            self.kv_caches_base_addr[self.engine_id] = kv_caches_base_addr
+
+            descs = self.nixl_wrapper.get_reg_descs(caches_data, "VRAM")
+            logger.debug("Registering descs: %s", caches_data)
+            self.nixl_wrapper.register_memory(descs)
+            self._registered_descs.append(descs)
+
+    def get_agent_metadata(self):
+        return self.nixl_wrapper.get_agent_metadata()
+    
+    def shutdown(self):
+        for descs_list in self._registered_descs:
+            self.nixl_wrapper.deregister_memory(descs_list)
+        for agent_names in self._remote_agents.values():
+            for agent_name in agent_names:
+                self.nixl_wrapper.remove_remote_agent(agent_name)
+        for src_xfer_side_handle in self.src_xfer_side_handles.values():
+            self.nixl_wrapper.release_dlist_handle(src_xfer_side_handle)
+        for dst_xfer_side_handles in self.dst_xfer_side_handles.values():
+            for dst_xfer_side_handle in dst_xfer_side_handles.values():
+                self.nixl_wrapper.release_dlist_handle(dst_xfer_side_handle)
+
+    def _get_ranges(self, block_ids):
+        # This function should return a list of ranges of block ids that are contiguous
+        # For example, if block_ids is [0, 1, 2, 4, 5, 6], the function should return [[0, 2], [4, 6]]
+        # The ranges are sorted by the starting block id
+        # The function should also make sure that the block ids are contiguous
+        # If the block ids are not contiguous, the function should raise an error
+        ranges = []
+        for i in range(len(block_ids)):
+            if i == 0 or block_ids[i] != block_ids[i-1] + 1:
+                ranges.append([block_ids[i], block_ids[i]])
+            else:
+                ranges[-1][1] = block_ids[i]
+        return ranges
+
+    def _get_block_descs_ids(self, engine_id, layer_ids, block_ids, i=None, tp_multiplier=1, staging_ranges=None):
+
+        if layer_ids == "all":
+            layer_ids = list(range(self.num_layers))
+        if block_ids == "all":
+            block_ids = list(range(self.num_blocks))
+
+        descs_ids = []
+
+
+        if i is not None:
+            num_blocks = self.num_blocks
+            for layer_id in layer_ids:
+                for entry_index in range(self.num_cache_entries):
+                    staging_range_idx = 0
+                    for block_id in block_ids:
+                        if staging_ranges is not None:
+                            if block_id > staging_ranges[staging_range_idx][1] or block_id < staging_ranges[staging_range_idx][0]:
+                                staging_range_idx += 1
+                            start_offset = staging_ranges[staging_range_idx][0]
+                            i_offset = i * (staging_ranges[staging_range_idx][-1] - start_offset + 1)
+                            descs_ids.append(layer_id * self.num_cache_entries * num_blocks * tp_multiplier + entry_index * num_blocks * tp_multiplier + start_offset * tp_multiplier + i_offset + (block_id - start_offset))
+                        else:
+                            descs_ids.append(layer_id * self.num_cache_entries * num_blocks + entry_index * num_blocks + block_id)
+        else:
+            num_blocks = self.dst_num_blocks[engine_id]
+            for layer_id in layer_ids:
+                for entry_index in range(self.num_cache_entries):
+                    for block_id in block_ids:
+                        descs_ids.append(layer_id * self.num_cache_entries * num_blocks + entry_index * num_blocks + block_id)
+        return descs_ids
+
+    def _get_same_length_ranges(self, src_ranges, dst_ranges, return_original_src_ranges=False):
+        # This function should return a list of ranges for both src and dst so that corresponding ranges are the same length
+        # For example, if src_ranges is [[0, 2] [4, 8]] and dst_ranges is [[1, 3], [5, 7], [9, 10]]
+        # The function should return ([[0, 2], [4, 6], [7, 8]], [[1, 3], [5, 7], [9, 10]])
+        src_overlapping_ranges, dst_overlapping_ranges = [], []
+
+        original_src_ranges = []
+        org_src_range = tuple(src_ranges[0])
+        
+        src_idx, dst_idx = 0, 0
+        while src_idx < len(src_ranges) and dst_idx < len(dst_ranges):
+            src_range = src_ranges[src_idx]
+            dst_range = dst_ranges[dst_idx]
+            
+            # Calculate the length of each range
+            src_len = src_range[-1] - src_range[0] + 1
+            dst_len = dst_range[-1] - dst_range[0] + 1
+            
+            # If ranges have the same length, add them directly
+            if src_len == dst_len:
+                src_overlapping_ranges.append([src_range[0], src_range[-1]])
+                dst_overlapping_ranges.append([dst_range[0], dst_range[-1]])
+                original_src_ranges.append(org_src_range)
+                src_idx += 1
+                dst_idx += 1
+                if src_idx < len(src_ranges):
+                    org_src_range = tuple(src_ranges[src_idx])
+            # If source range is longer, split it
+            elif src_len > dst_len:
+                src_overlapping_ranges.append([src_range[0], src_range[0] + dst_len - 1])
+                dst_overlapping_ranges.append([dst_range[0], dst_range[-1]])
+                original_src_ranges.append(org_src_range)
+                # Update source range for next iteration
+                src_ranges[src_idx] = [src_range[0] + dst_len, src_range[-1]]
+                dst_idx += 1
+            # If destination range is longer, split it
+            else:  # src_len < dst_len
+                src_overlapping_ranges.append([src_range[0], src_range[-1]])
+                dst_overlapping_ranges.append([dst_range[0], dst_range[0] + src_len - 1])
+                original_src_ranges.append(org_src_range)
+                # Update destination range for next iteration
+                dst_ranges[dst_idx] = [dst_range[0] + src_len, dst_range[-1]]
+                src_idx += 1
+                if src_idx < len(src_ranges):
+                    org_src_range = tuple(src_ranges[src_idx])
+        if return_original_src_ranges:
+            return src_overlapping_ranges, dst_overlapping_ranges, original_src_ranges
+        return src_overlapping_ranges, dst_overlapping_ranges
+
+    def read_blocks(self, local_block_ids, staging_block_ids, remote_block_ids, dst_engine_id):
+        logger.debug("Reading %d blocks from %s to %s", len(local_block_ids), self.agent_name, dst_engine_id)
+
+        assert len(local_block_ids) == len(staging_block_ids) == len(remote_block_ids)
+
+        if len(local_block_ids) == 0:
+            logger.debug("No blocks to read")
+            return
+
+        start_time = time.perf_counter()
+
+        if self._is_mla:
+            # TODO ptarasiewicz: we skip staging when is_mla is true, we shouldn't assign staging blocks at all
+            staging_rearranging_ranges = None
+            staging_block_ids = local_block_ids
+        else:
+            local_ranges = self._get_ranges(local_block_ids)
+            staging_ranges = self._get_ranges(staging_block_ids)
+
+            local_rearranging_ranges, staging_rearranging_ranges = self._get_same_length_ranges(local_ranges, staging_ranges)
+
+        tp_multiplier = self._tp_size[dst_engine_id] // self._tp_size[self.engine_id]
+        remote_block_descs_ids = self._get_block_descs_ids(dst_engine_id, "all", remote_block_ids)
+        local_xfer_side_handle = self.src_xfer_side_handles[tp_multiplier]
+        handles = []
+
+        logger.debug("Time to get block descs ids: %s ms", (time.perf_counter() - start_time) * 1000)
+        create_xfer_start_time = time.perf_counter()
+
+        for i in range(tp_multiplier):
+            staging_block_descs_ids = self._get_block_descs_ids(self.engine_id, "all", staging_block_ids, i=i, tp_multiplier=tp_multiplier, staging_ranges=staging_rearranging_ranges)
+            assert len(staging_block_descs_ids) == len(remote_block_descs_ids)
+            remote_xfer_side_handle = self.dst_xfer_side_handles[dst_engine_id][i]
+            handle = self.nixl_wrapper.make_prepped_xfer("READ", local_xfer_side_handle, staging_block_descs_ids, 
+                                                        remote_xfer_side_handle, remote_block_descs_ids, 
+                                                        "")
+            handles.append(handle)
+            status = self.nixl_wrapper.transfer(handle)
+
+        logger.debug("Time to create xfer: %s ms", (time.perf_counter() - create_xfer_start_time) * 1000)
+
+        transfer_start_time = time.perf_counter()
+
+        for handle in handles:
+            while (status := self.nixl_wrapper.check_xfer_state(handle)) != "DONE":
+                if status == "PROC":
+                    time.sleep(0.001)
+                else:
+                    raise RuntimeError("Read transfer failed with state %s", status)
+            # self.nixl_wrapper.abort_xfer(handle) # TODO ptarasiewicz: why abort is throwing errors?
+
+        logger.debug("Time to transfer: %s ms", (time.perf_counter() - transfer_start_time) * 1000)
+
+        rearrange_start_time = time.perf_counter()
+
+        if not self._is_mla:
+            for local_range, staging_range in zip(local_rearranging_ranges, staging_rearranging_ranges):
+                logger.debug("Rearranging tensors for cache: %s, local_range: %s, staging_range: %s", self.kv_caches[0].shape, local_range, staging_range)
+                for kv_cache in self.kv_caches:
+                    for cache in kv_cache:
+                        rearrange_tensors(cache[local_range[0]:local_range[1] + 1], cache[staging_range[0]:staging_range[1] + 1], tp_multiplier, "read")
+
+        logger.debug("Time to rearrange tensors: %s ms", (time.perf_counter() - rearrange_start_time) * 1000)
+        logger.debug("Total time for read: %s ms", (time.perf_counter() - start_time) * 1000)
+
+    def write_blocks(self, local_block_ids, staging_block_ids, remote_block_ids, dst_engine_id, notify_msg):
+        logger.debug("Writing %d blocks to %s from %s with notify message %s", len(local_block_ids), dst_engine_id, self.agent_name, notify_msg)
+
+        # hongkuanz: we send isl[:-1] tokens to the prefill where the kv for the last
+        # isl[-1] token is calculated in the first iteration in decode.
+        # If isl equals to a multiple of tokens_per_block + 1, prefill engine will have \
+        # one less block due to the missing last token.
+        remote_block_ids = remote_block_ids[:len(local_block_ids)]
+
+        assert len(staging_block_ids) == len(local_block_ids)
+        tp_multiplier = self._tp_size[dst_engine_id] // self._tp_size[self.engine_id]
+
+        if len(local_block_ids) == 0:
+            logger.debug("No blocks to write")
+            for i in range(tp_multiplier):
+                self.nixl_wrapper.send_notif(self._remote_agents[dst_engine_id][self.rank * tp_multiplier + i], notify_msg)
+            return
+        
+        start_time = time.perf_counter()
+
+        if self._is_mla:
+            # TODO ptarasiewicz: we skip staging when is_mla is true, we shouldn't assign staging blocks at all
+            staging_rearranging_ranges = None
+            staging_block_ids = local_block_ids
+        else:
+            local_ranges = self._get_ranges(local_block_ids)
+            staging_ranges = self._get_ranges(staging_block_ids)
+
+            local_rearranging_ranges, staging_rearranging_ranges = self._get_same_length_ranges(local_ranges, staging_ranges)
+            
+            for local_range, staging_range in zip(local_rearranging_ranges, staging_rearranging_ranges):
+                logger.debug("Rearranging tensors for cache: %s, local_range: %s, staging_range: %s", self.kv_caches[0].shape, local_range, staging_range)
+                for kv_cache in self.kv_caches:
+                    for cache in kv_cache:
+                        rearrange_tensors(cache[local_range[0]:local_range[1] + 1], cache[staging_range[0]:staging_range[1] + 1], tp_multiplier, "write")
+
+        logger.debug("Time to rearrange tensors: %s ms", (time.perf_counter() - start_time) * 1000)
+
+        create_xfer_start_time = time.perf_counter()
+
+        # getting block descs ids
+        remote_block_descs_ids = self._get_block_descs_ids(dst_engine_id, "all", remote_block_ids)
+        local_xfer_side_handle = self.src_xfer_side_handles[tp_multiplier]
+        
+        logger.debug("Creating xfer handles")
+        for i in range(tp_multiplier):
+            staging_block_descs_ids = self._get_block_descs_ids(self.engine_id, "all", staging_block_ids, i=i, tp_multiplier=tp_multiplier, staging_ranges=staging_rearranging_ranges)
+            assert len(staging_block_descs_ids) == len(remote_block_descs_ids)
+            remote_xfer_side_handle = self.dst_xfer_side_handles[dst_engine_id][i]
+            handle = self.nixl_wrapper.make_prepped_xfer("WRITE", local_xfer_side_handle, staging_block_descs_ids,
+                                                        remote_xfer_side_handle, remote_block_descs_ids, 
+                                                        notify_msg)
+            self._transfers[notify_msg].append(handle)
+            status = self.nixl_wrapper.transfer(handle)
+
+        logger.debug("Time to create xfer: %s ms", (time.perf_counter() - create_xfer_start_time) * 1000)
+
+        transfer_start_time = time.perf_counter()
+        logger.debug("Total time for write: %s ms", (time.perf_counter() - start_time) * 1000)
+                
+    def get_notifs(self):
+        return self.nixl_wrapper.update_notifs()
+    
+    def get_new_notifs(self):
+        return self.nixl_wrapper.get_new_notifs()
+
+    def add_remote_agent(self, engine_id, agent_metadata, agent_tp, kv_caches_base_addr, num_blocks):
+        self._tp_size[engine_id] = agent_tp
+        agent_names = []
+        for agent_meta in agent_metadata:
+            agent_name = self.nixl_wrapper.add_remote_agent(agent_meta)
+            agent_names.append(agent_name)
+        self._remote_agents[engine_id] = agent_names
+        self.kv_caches_base_addr[engine_id] = kv_caches_base_addr
+
+        tp_multiplier = self._tp_size[engine_id] // self._tp_size[self.engine_id]
+        assert tp_multiplier > 0, f"Decode TP cannot be smaller than prefill TP, got {self._tp_size[engine_id]} and {self._tp_size[self.engine_id]}"
+
+        logger.debug("Creating src xfer side handles for engine %s, tp_multiplier: %s", engine_id, tp_multiplier)
+        if self._is_mla:
+            dst_block_len = self.block_len
+        else:
+            dst_block_len = self.block_len // tp_multiplier
+        if tp_multiplier not in self.src_xfer_side_handles:
+            # create descs and xfer side handles
+            blocks_data = []
+            for layer_id in range(self.num_layers):
+                for base_addr in self.kv_caches_base_addr[self.engine_id][layer_id]:
+                    for block_id in range(self.num_blocks):
+                            block_offset = block_id * self.block_len
+                            for i in range(1 if self._is_mla else tp_multiplier):
+                                tp_multiplier_offset = i * dst_block_len
+                                blocks_data.append((base_addr + block_offset + tp_multiplier_offset, dst_block_len, self.rank))
+            logger.debug("Created %s blocks for src engine %s and rank %s", len(blocks_data), self.engine_id, self.rank * tp_multiplier + i)
+            descs = self.nixl_wrapper.get_xfer_descs(blocks_data, "VRAM")
+            self.src_xfer_side_handles[tp_multiplier] = self.nixl_wrapper.prep_xfer_dlist("", descs)
+
+        # create dst xfer side handles
+        self.dst_num_blocks[engine_id] = num_blocks
+        for i in range(tp_multiplier):
+            blocks_data = []
+            for layer_id in range(self.num_layers):
+                for base_addr in self.kv_caches_base_addr[engine_id][self.rank * tp_multiplier + i][layer_id]:
+                    for block_id in range(num_blocks):
+                        block_offset = block_id * dst_block_len
+                        blocks_data.append((base_addr + block_offset, dst_block_len, self.rank * tp_multiplier + i))
+            logger.debug("Created %s blocks for dst engine %s and rank %s", len(blocks_data), engine_id, self.rank * tp_multiplier + i)
+            descs = self.nixl_wrapper.get_xfer_descs(blocks_data, "VRAM")
+            self.dst_xfer_side_handles[engine_id][i] = self.nixl_wrapper.prep_xfer_dlist(self._remote_agents[engine_id][self.rank * tp_multiplier + i], descs)
+
+        return agent_names
+
+    def get_done_tranfers(self) -> List[str]:
+        done_req_ids = []
+        for req_id, handles in self._transfers.items():
+            running_reqs = []
+            for handle in handles:
+                xfer_state = self.nixl_wrapper.check_xfer_state(handle)
+                if xfer_state == "DONE":
+                    # self.nixl_wrapper.release_xfer_handle(handle) # TODO ptarasiewicz: why abort is throwing errors?
+                    continue
+                if xfer_state == "PROC":
+                    running_reqs.append(handle)
+                else:
+                    raise RuntimeError("Transfer failed with state %s", xfer_state)
+            if len(running_reqs) == 0:
+                done_req_ids.append(req_id)
+            else:
+                self._transfers[req_id] = running_reqs
+        for req_id in done_req_ids:
+            del self._transfers[req_id]
+        return done_req_ids
diff --git a/vllm/distributed/kv_transfer/kv_connector/dynamo_connector.py b/vllm/distributed/kv_transfer/kv_connector/dynamo_connector.py
new file mode 100644
index 000000000..418fc7154
--- /dev/null
+++ b/vllm/distributed/kv_transfer/kv_connector/dynamo_connector.py
@@ -0,0 +1,363 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+Simple KV Cache Connector for Distributed Machine Learning Inference
+
+The SimpleConnector transfers KV caches between prefill vLLM worker (KV cache 
+producer) and decode vLLM worker (KV cache consumer) using PyNcclPipe or
+MooncakePipe.
+
+But the logic can be extended to support other pipe and lookup buffer.
+"""
+import re
+from typing import TYPE_CHECKING, List, Optional, Tuple, Union
+
+import torch
+
+from vllm import _custom_ops as ops
+from vllm.config import VllmConfig, KVTransferConfig
+from vllm.distributed.kv_transfer.kv_connector.base import KVConnectorBase
+from vllm.distributed.utils import StatelessProcessGroup
+from vllm.distributed.kv_transfer.kv_lookup_buffer.simple_buffer import (
+    SimpleBuffer)
+from vllm.logger import init_logger
+from vllm.sequence import IntermediateTensors
+
+if TYPE_CHECKING:
+    from vllm.worker.model_runner import ModelInputForGPUWithSamplingMetadata
+
+logger = init_logger(__name__)
+
+
+class DynamoConnector(KVConnectorBase):
+
+    def __init__(
+        self,
+        rank: int,
+        local_rank: int,
+        config: VllmConfig,
+        world_group,
+    ):
+
+        self.config = config.kv_transfer_config
+        self.tp_size = config.parallel_config.tensor_parallel_size
+        self.rank = rank
+
+        if self.config.kv_connector != "DynamoNcclConnector":
+            raise NotImplementedError("Only DynamoNcclConnector is supported by the DynamoConnector class")
+
+        from vllm.distributed.kv_transfer.kv_pipe.pynccl_pipe import (
+            PyNcclPipe)
+        from vllm.distributed.kv_transfer.kv_pipe.dynamo_nccl_pipe import (
+            DynamoNcclDataPlane)
+        
+        logger.info(
+            "Initializing DynamoNcclConnector under kv_transfer_config %s",
+            self.config)
+
+        self.lookup_buffer_size = self.config.kv_buffer_size
+
+        self.producer_data_pipe: PyNcclPipe
+        self.consumer_data_pipe: PyNcclPipe
+        self.producer_signal_pipe: PyNcclPipe
+        self.consumer_signal_pipe: PyNcclPipe
+
+        self._broadcast_and_enhance_kv_config(rank, config, world_group)
+
+        self.kv_group_rank = self._get_kv_group_rank(self.config.kv_rank, rank, self.config)
+        self.tp_size = config.parallel_config.tensor_parallel_size
+
+        # 2 pipes for every rank in the world
+        if self.config.is_kv_producer:
+            port_offset_base = rank + 1
+        else:
+            port_offset_base = rank // self.config.tensor_parallel_multiplier + 1
+
+
+        self.local_kv_rank = rank % self.config.tensor_parallel_multiplier
+        self.global_kv_rank = self._get_global_kv_rank(self.config.kv_rank, rank, self.config)
+
+        self.data_pipe = PyNcclPipe(
+            kv_group_rank=self.kv_group_rank,
+            local_rank=local_rank,
+            config=self.config,
+            port_offset=port_offset_base,
+        )
+
+        self.data_plane = DynamoNcclDataPlane(
+            data_pipe=self.data_pipe,
+            port=self._get_data_plane_port(self.global_kv_rank),
+        )
+
+    def send_kv_caches_and_hidden_states(
+        self,
+        model_executable: torch.nn.Module,
+        model_input: "ModelInputForGPUWithSamplingMetadata",
+        kv_caches: List[torch.Tensor],
+        hidden_or_intermediate_states: Union[torch.Tensor,
+                                             IntermediateTensors],
+    ) -> None:
+
+        input_tokens_tensor = model_input.input_tokens
+        seq_lens = model_input.attn_metadata.seq_lens
+        slot_mapping_flat = model_input.attn_metadata.slot_mapping.flatten()
+        start_layer = model_executable.model.start_layer
+        end_layer = model_executable.model.end_layer
+        request_ids = list(model_input.request_ids_to_seq_ids.keys())
+
+        model_config = model_executable.model.config
+        is_deepseek = "deepseek" in model_config.architectures[0].lower()
+        if not is_deepseek:
+            num_heads = int(model_config.num_key_value_heads / self.tp_size)
+            hidden_size = model_config.hidden_size
+            num_attention_heads = model_config.num_attention_heads
+            head_size = int(hidden_size / num_attention_heads)
+        else:
+            num_heads = int(model_config.num_key_value_heads / self.tp_size)
+            hidden_size = model_config.hidden_size
+            num_attention_heads = model_config.num_attention_heads
+            head_size = int(4.5 * hidden_size / num_attention_heads)
+
+        # query_lens contains new KV caches that are added to vLLM.
+        # so we will send them to decode instance
+        # FIXME(Kuntai): This assume that all requests are prefill.
+        for idx, slen in enumerate(seq_lens):
+            start_pos = sum(seq_lens[:idx])
+            end_pos = start_pos + slen
+            current_tokens = input_tokens_tensor[start_pos:end_pos]
+            current_request_id = request_ids[idx]
+            decode_hostname, decode_kv_rank = self.parse_request_id(current_request_id)
+            decode_first_global_rank = self._get_global_kv_rank(decode_kv_rank, self.rank * self.config.tensor_parallel_multiplier, self.config)
+
+            for target_rank in range(self.config.tensor_parallel_multiplier):
+
+                keys, values = [], []
+
+                for layer_id in range(start_layer, end_layer):
+                    kv_cache = kv_caches[layer_id - start_layer]
+
+                    current_slot_mapping = slot_mapping_flat[start_pos:end_pos]
+
+                    num_heads_per_rank = num_heads // self.config.tensor_parallel_multiplier
+                    head_start = target_rank * num_heads_per_rank
+                    head_end = head_start + num_heads_per_rank
+
+                    if not is_deepseek:
+                        key_cache = kv_cache[0].reshape(-1, num_heads, head_size)
+                        value_cache = kv_cache[1].reshape(-1, num_heads, head_size)
+                        keys.append(key_cache[current_slot_mapping, head_start:head_end].unsqueeze(0))
+                        values.append(value_cache[current_slot_mapping, head_start:head_end].unsqueeze(0))
+                    else:
+                        key_cache = kv_cache
+                        keys.append(key_cache[current_slot_mapping].unsqueeze(0))
+                        values.append(torch.empty(0))
+
+                keys = torch.cat(keys, dim=0)
+                values = torch.cat(values, dim=0)
+
+                decode_global_rank = decode_first_global_rank + target_rank
+                decode_port = self._get_data_plane_port(decode_global_rank)
+                partial_hidden_or_intermediate_states = hidden_or_intermediate_states[start_pos:end_pos]
+                self._send(decode_hostname, decode_port, current_request_id, keys, values,
+                            partial_hidden_or_intermediate_states)
+
+        logger.debug("[rank%d]: KV send DONE.", torch.distributed.get_rank())
+
+    def recv_kv_caches_and_hidden_states(
+        self, model_executable: torch.nn.Module,
+        model_input: "ModelInputForGPUWithSamplingMetadata",
+        kv_caches: List[torch.Tensor]
+    ) -> Tuple[Union[torch.Tensor, IntermediateTensors], bool,
+               "ModelInputForGPUWithSamplingMetadata"]:
+
+        # When bypass_model_exec is set to False, it means that at least for one
+        # request its corresponding KV cache or hidden state is missing.
+        # In this case we need to do prefilling to recompute missing KV cache
+        # and hidden states.
+        bypass_model_exec = True
+
+        input_tokens_tensor = model_input.input_tokens
+        seq_lens = model_input.attn_metadata.seq_lens
+        slot_mapping = model_input.attn_metadata.slot_mapping.flatten()
+        request_ids = list(model_input.request_ids_to_seq_ids.keys())
+
+        hidden_or_intermediate_states_for_one_req = []
+
+        input_tokens_list = []
+        start_pos_list = []
+
+        model_config = model_executable.model.config
+        is_deepseek = "deepseek" in model_config.architectures[0].lower()
+
+        # enumerate different requests
+        # FIXME(Kuntai): This impl assumes that all requests are prefill.
+        for idx, slen in enumerate(seq_lens):
+
+            start_pos = sum(seq_lens[:idx])
+            end_pos = start_pos + slen
+            current_tokens = input_tokens_tensor[start_pos:end_pos]
+            current_request_id = request_ids[idx]
+            num_tokens = slen
+
+            # collecting data for rebuilding the input
+            input_tokens_list.append(current_tokens)
+            start_pos_list.append(start_pos)
+
+            ret = self._recv(current_request_id)
+            keys: torch.Tensor = ret[0]
+            values: torch.Tensor = ret[1]
+            hidden: torch.Tensor = ret[2]
+
+            # put received KV caches into paged memory
+            for i in range(model_executable.model.start_layer,
+                           model_executable.model.end_layer):
+
+                kv_cache = kv_caches[i - model_executable.model.start_layer]
+                layer = model_executable.model.layers[i]
+
+                if not is_deepseek:
+                    key_cache, value_cache = kv_cache[0], kv_cache[1]
+                    ops.reshape_and_cache_flash(
+                        keys[i - model_executable.model.start_layer].to(
+                            key_cache.device),
+                        values[i - model_executable.model.start_layer].to(
+                            value_cache.device),
+                        key_cache,
+                        value_cache,
+                        slot_mapping[start_pos:end_pos],
+                        layer.self_attn.attn.kv_cache_dtype,
+                        layer.self_attn.attn._k_scale,
+                        layer.self_attn.attn._v_scale,
+                    )
+                else:
+                    key_cache = kv_cache
+                    copy_from =keys[i - model_executable.model.start_layer].to(
+                            key_cache.device)
+                    kv_cache[slot_mapping[start_pos:end_pos]] = copy_from
+
+            hidden_or_intermediate_states_for_one_req.append(hidden)
+
+        if not bypass_model_exec:
+            # Some of the KV cache is not retrieved
+            # Here we will fall back to normal model forwarding
+            # But optionally you can adjust model_input so that you only do
+            # prefilling on those tokens that are missing KV caches.
+            logger.debug(
+                "[rank%d]: Failed to receive all KVs and hidden "
+                "states, redo model forwarding.", torch.distributed.get_rank())
+            hidden_or_intermediate_states = None
+
+        else:
+            logger.debug(
+                "[rank%d]: Successfully received all KVs and hidden "
+                "states, skip model forwarding.", torch.distributed.get_rank())
+            hidden_or_intermediate_states = torch.cat(
+                hidden_or_intermediate_states_for_one_req, dim=0)
+
+        return hidden_or_intermediate_states, bypass_model_exec, model_input
+
+    def close(self):
+        self.data_pipe.close()
+        # self.data_plane.close()
+
+    @staticmethod
+    def parse_request_id(request_id: str) -> Tuple[str, int]:
+        # Regular expression to match the string hostname and integer decode_kv_rank
+        pattern = r"___decode_hostname_(.*)___decode_kv_rank_(\d+)"
+        
+        # Use re.search to find the pattern in the request_id
+        match = re.search(pattern, request_id)
+        if match:
+            # Extract the ranks
+            decode_hostname = match.group(1)
+            decode_rank = int(match.group(2))
+            
+            return decode_hostname, decode_rank
+        raise ValueError(f"Request id {request_id} does not contain hostname and decode_kv_rank")
+
+    def _send(self, hostname: str, port: int, request_id: str, keys: torch.Tensor, values: torch.Tensor, hidden: torch.Tensor):
+        remote_address = f"{hostname}:{port}"
+        self.data_plane.send_tensor(keys, f"{request_id}_keys", remote_address)
+        self.data_plane.send_tensor(values, f"{request_id}_values", remote_address)
+        self.data_plane.send_tensor(hidden, f"{request_id}_hidden", remote_address)
+
+    def _recv(self, request_id: str) -> Tuple[torch.Tensor, torch.Tensor, torch.Tensor]:
+        keys = self.data_plane.recv_tensor(f"{request_id}_keys")
+        values = self.data_plane.recv_tensor(f"{request_id}_values")
+        hidden = self.data_plane.recv_tensor(f"{request_id}_hidden")
+        return keys, values, hidden
+
+    def _get_kv_group_rank(self, kv_rank: int, rank: int, config: KVTransferConfig) -> int:
+        if kv_rank < config.kv_producers_parallel_size:
+            return kv_rank
+        
+        kv_consumer_rank = kv_rank - config.kv_producers_parallel_size
+        return config.kv_producers_parallel_size + kv_consumer_rank * config.tensor_parallel_multiplier + rank % config.tensor_parallel_multiplier
+    
+
+    def _get_global_kv_rank(self, kv_rank: int, rank: int, config: KVTransferConfig) -> int:
+        if kv_rank <= config.kv_producers_parallel_size:
+            return kv_rank * config.kv_producers_tensor_parallel_size + rank
+        
+        kv_consumer_rank = kv_rank - config.kv_producers_parallel_size
+        return config.kv_producers_parallel_size * config.kv_producers_tensor_parallel_size + kv_consumer_rank * config.kv_consumers_tensor_parallel_size + rank
+
+
+    def _get_data_plane_port(self, global_kv_rank: int) -> int:
+        return self.config.kv_port + self.config.kv_producers_tensor_parallel_size + 1 + global_kv_rank
+
+    def _broadcast_and_enhance_kv_config(self, rank: int, config: VllmConfig, world_group):
+        if rank == 0:
+            config_group = StatelessProcessGroup.create(
+                host=self.config.kv_ip,
+                port=self.config.kv_port,
+                rank=self.config.kv_rank,
+                world_size=self.config.kv_parallel_size,
+            )
+            parallel_configs = config_group.all_gather_obj({
+                "kv_role": self.config.kv_role,
+                "tensor_parallel_size": config.parallel_config.tensor_parallel_size,
+                "pipeline_parallel_size": config.parallel_config.pipeline_parallel_size,
+            })
+            logger.debug("parallel_configs: %s", parallel_configs)
+            kv_config_enhanced = {
+                "kv_producers_tensor_parallel_size": None,
+                "kv_consumers_tensor_parallel_size": None,
+                "kv_producers_pipeline_parallel_size": None,
+                "kv_consumers_pipeline_parallel_size": None,
+                "kv_producers_parallel_size": 0,
+            }
+            for parallel_config in parallel_configs:
+                kv_role = parallel_config["kv_role"]
+                assert parallel_config["pipeline_parallel_size"] == 1, f"Only pipeline parallel size 1 is supported for kv transfer instances"
+                
+                if kv_role == "kv_producer":
+                    kv_config_enhanced["kv_producers_parallel_size"] += 1
+                if kv_config_enhanced[f"{kv_role}s_tensor_parallel_size"] is None:
+                    kv_config_enhanced[f"{kv_role}s_tensor_parallel_size"] = parallel_config["tensor_parallel_size"]
+                    kv_config_enhanced[f"{kv_role}s_pipeline_parallel_size"] = parallel_config["pipeline_parallel_size"]
+                else:
+                    assert kv_config_enhanced[f"{kv_role}s_tensor_parallel_size"] == parallel_config["tensor_parallel_size"], f"All kv {kv_role}s should have the same tensor parallel size"
+                    assert kv_config_enhanced[f"{kv_role}s_pipeline_parallel_size"] == parallel_config["pipeline_parallel_size"], f"All kv {kv_role}s should have the same pipeline parallel size"
+            world_group.broadcast_object(kv_config_enhanced)
+        else:
+            kv_config_enhanced = world_group.broadcast_object()
+        logger.info("kv_config_enhanced: %s", kv_config_enhanced)
+
+        self.config.kv_producers_tensor_parallel_size = kv_config_enhanced["kv_producers_tensor_parallel_size"]
+        self.config.kv_consumers_tensor_parallel_size = kv_config_enhanced["kv_consumers_tensor_parallel_size"]
+        self.config.kv_producers_pipeline_parallel_size = kv_config_enhanced["kv_producers_pipeline_parallel_size"]
+        self.config.kv_consumers_pipeline_parallel_size = kv_config_enhanced["kv_consumers_pipeline_parallel_size"]
+        self.config.kv_producers_parallel_size = kv_config_enhanced["kv_producers_parallel_size"]
diff --git a/vllm/distributed/kv_transfer/kv_connector/factory.py b/vllm/distributed/kv_transfer/kv_connector/factory.py
index e37ce6dc7..f1ba144c7 100644
--- a/vllm/distributed/kv_transfer/kv_connector/factory.py
+++ b/vllm/distributed/kv_transfer/kv_connector/factory.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import importlib
 from typing import TYPE_CHECKING, Callable, Dict, Type
@@ -27,13 +40,13 @@ class KVConnectorFactory:
 
     @classmethod
     def create_connector(cls, rank: int, local_rank: int,
-                         config: "VllmConfig") -> KVConnectorBase:
+                         config: "VllmConfig", world_group) -> KVConnectorBase:
         connector_name = config.kv_transfer_config.kv_connector
         if connector_name not in cls._registry:
             raise ValueError(f"Unsupported connector type: {connector_name}")
 
         connector_cls = cls._registry[connector_name]()
-        return connector_cls(rank, local_rank, config)
+        return connector_cls(rank, local_rank, config, world_group)
 
 
 # Register various connectors here.
diff --git a/vllm/distributed/kv_transfer/kv_connector/simple_connector.py b/vllm/distributed/kv_transfer/kv_connector/simple_connector.py
index 49b97d7b5..c77c570ea 100644
--- a/vllm/distributed/kv_transfer/kv_connector/simple_connector.py
+++ b/vllm/distributed/kv_transfer/kv_connector/simple_connector.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 """
 Simple KV Cache Connector for Distributed Machine Learning Inference
 
@@ -8,14 +21,16 @@ MooncakePipe.
 
 But the logic can be extended to support other pipe and lookup buffer.
 """
+import re
 from typing import TYPE_CHECKING, List, Optional, Tuple, Union
 
 import torch
 
 import vllm.envs as envs
 from vllm import _custom_ops as ops
-from vllm.config import VllmConfig
+from vllm.config import VllmConfig, KVTransferConfig
 from vllm.distributed.kv_transfer.kv_connector.base import KVConnectorBase
+from vllm.distributed.utils import StatelessProcessGroup
 from vllm.distributed.kv_transfer.kv_lookup_buffer.simple_buffer import (
     SimpleBuffer)
 from vllm.logger import init_logger
@@ -34,9 +49,11 @@ class SimpleConnector(KVConnectorBase):
         rank: int,
         local_rank: int,
         config: VllmConfig,
+        world_group,
     ):
 
         self.config = config.kv_transfer_config
+        self.kv_group_rank = self._get_kv_group_rank(self.config.kv_rank, rank, self.config)
         self.tp_size = config.parallel_config.tensor_parallel_size
         self.is_deepseek_mla = config.model_config.is_deepseek_mla
         self.use_mla_opt = not envs.VLLM_MLA_DISABLE
@@ -74,20 +91,31 @@ class SimpleConnector(KVConnectorBase):
         self.producer_signal_pipe: Union[PyNcclPipe, MooncakePipe]
         self.consumer_signal_pipe: Union[PyNcclPipe, MooncakePipe]
 
+        self._broadcast_and_enhance_kv_config(rank, config, world_group)
+
+        self.kv_group_rank = self._get_kv_group_rank(self.config.kv_rank, rank, self.config)
+        self.tp_size = config.parallel_config.tensor_parallel_size
+
         # 2 pipes for every rank in the world
-        port_offset_base = 2 * rank
+        if self.config.is_kv_producer:
+            port_offset_base = 2 * rank + 1
+        else:
+            port_offset_base = 2 * (rank // self.config.tensor_parallel_multiplier) + 1
 
+        self.local_kv_rank = rank % self.config.tensor_parallel_multiplier
         # In disaggregated prefill, the prefill vLLM only uses send pipe
         # and the decode vLLM only uses recv pipe
         if self.config.is_kv_producer:
 
             if self.config.kv_connector == "PyNcclConnector":
                 self.producer_data_pipe = PyNcclPipe(
+                    kv_group_rank=self.kv_group_rank,
                     local_rank=local_rank,
                     config=self.config,
                     port_offset=port_offset_base,
                 )
                 self.producer_signal_pipe = PyNcclPipe(
+                    kv_group_rank=self.kv_group_rank,
                     local_rank=local_rank,
                     config=self.config,
                     port_offset=port_offset_base + 1,
@@ -111,11 +139,13 @@ class SimpleConnector(KVConnectorBase):
             # its recv pipe to the send pipe of KV producder
             if self.config.kv_connector == "PyNcclConnector":
                 self.consumer_data_pipe = PyNcclPipe(
+                    kv_group_rank=self.kv_group_rank,
                     local_rank=local_rank,
                     config=self.config,
                     port_offset=port_offset_base,
                 )
                 self.consumer_signal_pipe = PyNcclPipe(
+                    kv_group_rank=self.kv_group_rank,
                     local_rank=local_rank,
                     config=self.config,
                     port_offset=port_offset_base + 1,
@@ -134,21 +164,25 @@ class SimpleConnector(KVConnectorBase):
                 self.config.kv_buffer_size,
             )
 
-    def select(self, input_tokens: Optional[torch.Tensor],
+    def select(self, source_rank: int, input_tokens: Optional[torch.Tensor],
                roi: Optional[torch.Tensor]) -> List[Optional[torch.Tensor]]:
 
+        logger.info("Selecting KV caches and hidden states for source rank %d", source_rank)
+
         assert self.consumer_buffer is not None, "Please initialize the "\
             "consumer buffer before calling select."
-        return self.consumer_buffer.drop_select(input_tokens, roi)
+        return self.consumer_buffer.drop_select(source_rank, self.local_kv_rank, input_tokens, roi)
 
-    def insert(self, input_tokens: torch.Tensor, roi: torch.Tensor,
+    def insert(self, kv_group_rank: int, target_rank: int, input_tokens: torch.Tensor, roi: torch.Tensor,
                key: torch.Tensor, value: torch.Tensor,
                hidden: torch.Tensor) -> None:
 
+        logger.info("Inserting KV caches and hidden states for kv_group_rank %d, target rank %d", kv_group_rank, target_rank)
+
         assert self.producer_buffer is not None, "Please initialize the "\
             "producer buffer before calling insert."
 
-        self.producer_buffer.insert(input_tokens, roi, key, value, hidden)
+        self.producer_buffer.insert(kv_group_rank, target_rank, input_tokens, roi, key, value, hidden)
 
     def send_kv_caches_and_hidden_states(
         self,
@@ -165,6 +199,7 @@ class SimpleConnector(KVConnectorBase):
         num_prefill_tokens = model_input.attn_metadata.num_prefill_tokens
         start_layer = model_executable.model.start_layer
         end_layer = model_executable.model.end_layer
+        request_ids = list(model_input.request_ids_to_seq_ids.keys())
 
         model_config = model_executable.model.config
         num_heads = int(model_config.num_key_value_heads / self.tp_size)
@@ -207,11 +242,11 @@ class SimpleConnector(KVConnectorBase):
                 break
 
             current_tokens = input_tokens_tensor[start_pos:end_pos]
+            current_request_id = request_ids[idx]
+            _, decode_kv_rank = self.parse_request_id(current_request_id)
+            starting_kv_group_rank = self._get_kv_group_rank(decode_kv_rank, 0, self.config)
 
-            keys, values = [], []
-
-            for layer_id in range(start_layer, end_layer):
-                kv_cache = kv_caches[layer_id - start_layer]
+            for target_rank in range(self.config.tensor_parallel_multiplier):
 
                 if self.is_deepseek_mla and self.use_mla_opt:
                     key_cache = kv_cache.reshape(-1, num_heads, head_size)
@@ -220,18 +255,32 @@ class SimpleConnector(KVConnectorBase):
                     key_cache = kv_cache[0].reshape(-1, num_heads, head_size)
                     value_cache = kv_cache[1].reshape(-1, num_heads, head_size)
 
-                current_slot_mapping = slot_mapping_flat[start_pos:end_pos]
+                for layer_id in range(start_layer, end_layer):
+                    kv_cache = kv_caches[layer_id - start_layer]
+
+                    current_slot_mapping = slot_mapping_flat[start_pos:end_pos]
 
-                keys.append(key_cache[current_slot_mapping].unsqueeze(0))
-                values.append(value_cache[current_slot_mapping].unsqueeze(0))
+                    num_heads_per_rank = num_heads // self.config.tensor_parallel_multiplier
+                    head_start = target_rank * num_heads_per_rank
+                    head_end = head_start + num_heads_per_rank
 
-            keys = torch.cat(keys, dim=0)
-            values = torch.cat(values, dim=0)
+                    if not is_deepseek:
+                        key_cache = kv_cache[0].reshape(-1, num_heads, head_size)
+                        value_cache = kv_cache[1].reshape(-1, num_heads, head_size)
+                        keys.append(key_cache[current_slot_mapping, head_start:head_end].unsqueeze(0))
+                        values.append(value_cache[current_slot_mapping, head_start:head_end].unsqueeze(0))
+                    else:
+                        key_cache = kv_cache
+                        keys.append(key_cache[current_slot_mapping].unsqueeze(0))
+                        values.append(torch.empty(0))
 
-            self.insert(current_tokens,
-                        torch.ones_like(current_tokens,
-                                        dtype=bool), keys, values,
-                        hidden_or_intermediate_states[start_pos:end_pos])
+                keys = torch.cat(keys, dim=0)
+                values = torch.cat(values, dim=0)
+
+                self.insert(starting_kv_group_rank, target_rank, current_tokens,
+                            torch.ones_like(current_tokens,
+                                            dtype=bool), keys, values,
+                            hidden_or_intermediate_states[start_pos:end_pos])
 
         logger.debug("[rank%d]: KV send DONE.", torch.distributed.get_rank())
 
@@ -254,6 +303,7 @@ class SimpleConnector(KVConnectorBase):
         seq_lens = model_input.attn_metadata.seq_lens
         num_prefill_tokens = model_input.attn_metadata.num_prefill_tokens
         slot_mapping = model_input.attn_metadata.slot_mapping.flatten()
+        request_ids = list(model_input.request_ids_to_seq_ids.keys())
 
         hidden_or_intermediate_states_for_one_req = []
 
@@ -261,6 +311,9 @@ class SimpleConnector(KVConnectorBase):
         num_computed_tokens_list = []
         start_pos_list = []
 
+        model_config = model_executable.model.config
+        is_deepseek = "deepseek" in model_config.architectures[0].lower()
+
         # enumerate different requests
         # FIXME(Kuntai): This impl assumes that all requests are prefill.
         for idx, slen in enumerate(seq_lens):
@@ -280,13 +333,15 @@ class SimpleConnector(KVConnectorBase):
                 break
 
             current_tokens = input_tokens_tensor[start_pos:end_pos]
+            current_request_id = request_ids[idx]
+            prefill_rank, _ = self.parse_request_id(current_request_id)
             num_tokens = slen
 
             # collecting data for rebuilding the input
             input_tokens_list.append(current_tokens)
             start_pos_list.append(start_pos)
 
-            ret = self.select(current_tokens,
+            ret = self.select(prefill_rank, current_tokens,
                               torch.ones_like(current_tokens, dtype=bool))
             if ret[0] is None:
                 # didn't find any match.
@@ -379,3 +434,77 @@ class SimpleConnector(KVConnectorBase):
             # MooncakePipe reuses data_pipe for signal_pipe, so we only have to
             # close the data_pipe.
             pass
+
+    @staticmethod
+    def parse_request_id(request_id):
+        # Regular expression to match the ranks
+        pattern = r"___prefill_kv_rank_(\d+)___decode_kv_rank_(\d+)"
+        
+        # Use re.search to find the pattern in the request_id
+        match = re.search(pattern, request_id)
+        
+        if match:
+            # Extract the ranks
+            prefill_rank = int(match.group(1))
+            decode_rank = int(match.group(2))
+            
+            return prefill_rank, decode_rank
+        else:
+            return None, None
+
+    
+
+    def _get_kv_group_rank(self, kv_rank: int, rank: int, config: KVTransferConfig) -> int:
+        if kv_rank < config.kv_producers_parallel_size:
+            return kv_rank
+        
+        kv_consumer_rank = kv_rank - config.kv_producers_parallel_size
+        return config.kv_producers_parallel_size + kv_consumer_rank * config.tensor_parallel_multiplier + rank % config.tensor_parallel_multiplier
+
+    def _broadcast_and_enhance_kv_config(self, rank: int, config: VllmConfig, world_group):
+        if rank == 0:
+            if self.config.kv_connector == "PyNcclConnector":
+                config_group = StatelessProcessGroup.create(
+                    host=self.config.kv_ip,
+                    port=self.config.kv_port,
+                    rank=self.config.kv_rank,
+                    world_size=self.config.kv_parallel_size,
+                )
+                parallel_configs = config_group.all_gather_obj({
+                    "kv_role": self.config.kv_role,
+                    "tensor_parallel_size": config.parallel_config.tensor_parallel_size,
+                    "pipeline_parallel_size": config.parallel_config.pipeline_parallel_size,
+                })
+                logger.debug("parallel_configs: %s", parallel_configs)
+                kv_config_enhanced = {
+                    "kv_producers_tensor_parallel_size": None,
+                    "kv_consumers_tensor_parallel_size": None,
+                    "kv_producers_pipeline_parallel_size": None,
+                    "kv_consumers_pipeline_parallel_size": None,
+                    "kv_producers_parallel_size": 0,
+                }
+                for parallel_config in parallel_configs:
+                    kv_role = parallel_config["kv_role"]
+                    assert parallel_config["pipeline_parallel_size"] == 1, f"Only pipeline parallel size 1 is supported for kv transfer instances"
+                    
+                    if kv_role == "kv_producer":
+                        kv_config_enhanced["kv_producers_parallel_size"] += 1
+                    if kv_config_enhanced[f"{kv_role}s_tensor_parallel_size"] is None:
+                        kv_config_enhanced[f"{kv_role}s_tensor_parallel_size"] = parallel_config["tensor_parallel_size"]
+                        kv_config_enhanced[f"{kv_role}s_pipeline_parallel_size"] = parallel_config["pipeline_parallel_size"]
+                    else:
+                        assert kv_config_enhanced[f"{kv_role}s_tensor_parallel_size"] == parallel_config["tensor_parallel_size"], f"All kv {kv_role}s should have the same tensor parallel size"
+                        assert kv_config_enhanced[f"{kv_role}s_pipeline_parallel_size"] == parallel_config["pipeline_parallel_size"], f"All kv {kv_role}s should have the same pipeline parallel size"
+                world_group.broadcast_object(kv_config_enhanced)
+
+            else:
+                raise NotImplementedError("MooncakeConnector is not supported in Dynamo patch")
+        else:
+            kv_config_enhanced = world_group.broadcast_object()
+        logger.info("kv_config_enhanced: %s", kv_config_enhanced)
+
+        self.config.kv_producers_tensor_parallel_size = kv_config_enhanced["kv_producers_tensor_parallel_size"]
+        self.config.kv_consumers_tensor_parallel_size = kv_config_enhanced["kv_consumers_tensor_parallel_size"]
+        self.config.kv_producers_pipeline_parallel_size = kv_config_enhanced["kv_producers_pipeline_parallel_size"]
+        self.config.kv_consumers_pipeline_parallel_size = kv_config_enhanced["kv_consumers_pipeline_parallel_size"]
+        self.config.kv_producers_parallel_size = kv_config_enhanced["kv_producers_parallel_size"]
diff --git a/vllm/distributed/kv_transfer/kv_lookup_buffer/simple_buffer.py b/vllm/distributed/kv_transfer/kv_lookup_buffer/simple_buffer.py
index 10bbfe1dd..8268bf3eb 100644
--- a/vllm/distributed/kv_transfer/kv_lookup_buffer/simple_buffer.py
+++ b/vllm/distributed/kv_transfer/kv_lookup_buffer/simple_buffer.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 """
     Implements a distributed key-value (KV) cache transfer mechanism.
 
@@ -11,7 +24,8 @@
 """
 import threading
 from collections import deque
-from typing import Deque, List, Optional, Union
+from concurrent.futures import ThreadPoolExecutor
+from typing import Deque, List, Optional, Union, Dict
 
 import torch
 
@@ -45,7 +59,7 @@ class SimpleBuffer(KVLookupBufferBase):
         self.buffer_cv = threading.Condition()
         self.signal_pipe = signal_pipe
         self.data_pipe = data_pipe
-        self.request_handling_thread: Optional[threading.Thread] = None
+        self.request_handling_thread: Optional[ThreadPoolExecutor] = None
 
         self.normal_signal = torch.tensor([0], device="cpu")
         self.end_signal = None
@@ -56,10 +70,16 @@ class SimpleBuffer(KVLookupBufferBase):
         # tokens_roi_sender: tokens and roi of the producer (in the buffer)
         # tokens_roi_recver: tokens and roi of the consumer (query)
 
-        tokens_sender = tokens_roi_sender[0]
-        tokens_recver = tokens_roi_recver[0]
-        roi_sender = tokens_roi_sender[1]
-        roi_recver = tokens_roi_recver[1]
+        target_rank_sender = tokens_roi_sender[0]
+        target_rank_recver = tokens_roi_recver[0]
+
+        if target_rank_sender.item() != target_rank_recver.item():
+            return 0
+        
+        tokens_sender = tokens_roi_sender[1]
+        tokens_recver = tokens_roi_recver[1]
+        roi_sender = tokens_roi_sender[2]
+        roi_recver = tokens_roi_recver[2]
 
         if tokens_recver is None:
             # consumer sends an empty request
@@ -79,14 +99,14 @@ class SimpleBuffer(KVLookupBufferBase):
 
         return 0
 
-    def _send_tensor_and_dec_size(self,
-                                  tensor: Optional[torch.Tensor]) -> None:
+    def _send_tensor_and_dec_size(self, tensor: Optional[torch.Tensor],
+                                  target_rank: int) -> None:
 
         assert tensor is not None, "Use self.data_pipe.send(None) instead"
         self.buffer_size -= tensor.element_size() * tensor.numel()
         if tensor.dtype == torch.bool:
             tensor = tensor.float()
-        self.data_pipe.send_tensor(tensor)
+        self.data_pipe.send_tensor(tensor, target_rank)
 
     def _get_element_size(self, data: Optional[Union[List, torch.Tensor]]):
 
@@ -99,7 +119,7 @@ class SimpleBuffer(KVLookupBufferBase):
 
         raise AssertionError(f"Unknown data type {type(data)}")
 
-    def _add_to_buffer(self, input_tokens: torch.Tensor, roi: torch.Tensor,
+    def _add_to_buffer(self, target_rank: int, input_tokens: torch.Tensor, roi: torch.Tensor,
                        key: torch.Tensor, value: torch.Tensor,
                        hidden: torch.Tensor):
 
@@ -132,23 +152,54 @@ class SimpleBuffer(KVLookupBufferBase):
     def _is_end_signal(self, signal):
         return signal is None
 
-    def drop_select_handler(self):
+    def drop_select_handler(self, rank: int):
 
         try:
 
-            while True:
-                signal = self.signal_pipe.recv_tensor()
-                if self._is_end_signal(signal):
-                    logger.info("Received end signal!")
-                    break
+            signal = self.signal_pipe.recv_tensor(rank)
+            if self._is_end_signal(signal):
+                logger.info("Received end signal!")
+                return
+            target_kv_rank = self.data_pipe.recv_tensor(rank)
+            # assert target_rank.item() == rank, "Target rank does not match"\
+            #     "the rank of the drop-select handler"
+            input_tokens = self.data_pipe.recv_tensor(rank)
+            roi = self.data_pipe.recv_tensor(rank)
+            assert roi is not None, "Please provide the roi when sending "\
+                "drop-select request"
+            roi = (roi > 0.5)
+            tokens_roi_recver = [target_kv_rank, input_tokens, roi]
+
+            matched_length = 0
+
+            # perform input tokens and roi matching
+            # FIXME: this matching is O(n), ideally it should be O(1)
+            # but this buffer size won't (and shouldn't) be too large so
+            # the fix is not urgent.
+            with self.buffer_lock:
+
+                for _ in range(len(self.buffer)):
 
-                input_tokens = self.data_pipe.recv_tensor()
+                    temp_length = self._matches(self.buffer[0],
+                                                tokens_roi_recver)
+                    if temp_length > 0:
+                        matched_length = temp_length
+                        break
+                    # rotate the element we just accessed to the end
+                    self.buffer.rotate(-1)
 
-                roi = self.data_pipe.recv_tensor()
-                assert roi is not None, "Please provide the roi when sending "\
-                    "drop-select request"
-                roi = (roi > 0.5)
-                tokens_roi_recver = [input_tokens, roi]
+                if matched_length > 0:
+                    # need to clone the tensor
+                    # in case the tensor is freed before sending finishes
+                    matched_item = self.buffer.popleft()
+                    target_rank = matched_item[0].item()
+                    for tensor in matched_item[1:]:
+                        self._send_tensor_and_dec_size(tensor, rank)
+
+                else:
+                    # no match, just send None
+                    for _ in range(5):
+                        self.data_pipe.send_tensor(None, rank)
 
                 def is_buffer_available(
                     tokens_roi_recver: List[torch.Tensor], ) -> bool:
@@ -182,11 +233,12 @@ class SimpleBuffer(KVLookupBufferBase):
 
         logger.debug("Closing drop_select_handler")
 
+
     def drop_select(
-            self, input_tokens: Optional[torch.Tensor],
+            self, rank: int, kv_rank: int, input_tokens: Optional[torch.Tensor],
             roi: Optional[torch.Tensor]) -> List[Optional[torch.Tensor]]:
 
-        assert self.request_handling_thread is None, \
+        assert not self.request_handling_thread, \
             "drop_select should be called by the KV cache consumer "\
             "(e.g. the decode vLLM instance)"
 
@@ -195,19 +247,21 @@ class SimpleBuffer(KVLookupBufferBase):
         if isinstance(roi, torch.Tensor):
             roi = roi.clone().float()
 
-        self.signal_pipe.send_tensor(self.normal_signal)
-        self.data_pipe.send_tensor(input_tokens)
-        self.data_pipe.send_tensor(roi)
+        self.signal_pipe.send_tensor(self.normal_signal, rank)
+
+        self.data_pipe.send_tensor(torch.tensor(kv_rank), rank)
+        self.data_pipe.send_tensor(input_tokens, rank)
+        self.data_pipe.send_tensor(roi, rank)
 
-        input_tokens = self.data_pipe.recv_tensor()
-        roi = self.data_pipe.recv_tensor()
+        input_tokens = self.data_pipe.recv_tensor(rank)
+        roi = self.data_pipe.recv_tensor(rank)
         if roi is not None:
             # convert from float tensor to bool tensor
             # as PyNccl does not support sending bool tensor
             roi = (roi > 0.5)
-        key = self.data_pipe.recv_tensor()
-        value = self.data_pipe.recv_tensor()
-        hidden = self.data_pipe.recv_tensor()
+        key = self.data_pipe.recv_tensor(rank)
+        value = self.data_pipe.recv_tensor(rank)
+        hidden = self.data_pipe.recv_tensor(rank)
 
         return [input_tokens, roi, key, value, hidden]
 
@@ -220,15 +274,13 @@ class SimpleBuffer(KVLookupBufferBase):
         # when calling the insert, the current process is a sender
         # need to launch the request handler and start listening to request.
         if self.request_handling_thread is None:
-            self.request_handling_thread = threading.Thread(
-                target=self.drop_select_handler)
-            self.request_handling_thread.start()
+            self.request_handling_thread = ThreadPoolExecutor(max_workers=1)
+        self.request_handling_thread.submit(self.drop_select_handler)
 
     def close(self):
 
-        if hasattr(self, "request_handling_thread"
-                   ) and self.request_handling_thread is not None:
-            self.request_handling_thread.join()
+        if hasattr(self, "request_handling_thread") and self.request_handling_thread:
+            self.request_handling_thread.shutdown()
 
         else:
             # TODO: have a explicit close signal and have a explicit way to
diff --git a/vllm/distributed/kv_transfer/kv_pipe/base.py b/vllm/distributed/kv_transfer/kv_pipe/base.py
index 40589fb3e..a3991c39d 100644
--- a/vllm/distributed/kv_transfer/kv_pipe/base.py
+++ b/vllm/distributed/kv_transfer/kv_pipe/base.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 """
 This file defines an interface `KVPipeBase`
 that provides an abstraction for sending and receiving tensors, or None, via
@@ -23,7 +36,7 @@ class KVPipeBase(ABC):
     """
 
     @abstractmethod
-    def send_tensor(self, tensor: Optional[torch.Tensor]) -> None:
+    def send_tensor(self, tensor: Optional[torch.Tensor], target_rank: int = 0) -> None:
         """Send a tensor, or None, via the pipe.
         
         Need to support sending None -- important for error handling.
@@ -41,7 +54,7 @@ class KVPipeBase(ABC):
         raise NotImplementedError
 
     @abstractmethod
-    def recv_tensor(self) -> Optional[torch.Tensor]:
+    def recv_tensor(self, src_rank: int) -> Optional[torch.Tensor]:
         """Receive a tensor (can be None) from the pipeline.
 
         Returns:
diff --git a/vllm/distributed/kv_transfer/kv_pipe/dynamo_nccl_pipe.py b/vllm/distributed/kv_transfer/kv_pipe/dynamo_nccl_pipe.py
new file mode 100644
index 000000000..ca5345359
--- /dev/null
+++ b/vllm/distributed/kv_transfer/kv_pipe/dynamo_nccl_pipe.py
@@ -0,0 +1,139 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import logging
+import threading
+import typing
+import zmq
+import socket
+import time
+import torch
+
+from vllm.distributed.kv_transfer.kv_pipe.pynccl_pipe import PyNcclPipe
+
+
+logger = logging.getLogger(__name__)
+
+
+class DynamoNcclDataPlane:
+    def __init__(
+        self,
+        data_pipe: PyNcclPipe,
+        hostname: str = "",
+        port: int = 0,
+    ) -> None:
+        
+        self.data_pipe = data_pipe
+        if not hostname:
+            hostname = socket.gethostname()
+        if port == 0:
+            raise ValueError("Port cannot be 0")
+        self._hostname = hostname
+        self._port = port
+        self.store = {}
+        self.context = zmq.Context()
+        self.rep_socket = self.context.socket(zmq.REP)
+        logger.info(f"Rank {self.rank} binding to {self._hostname}:{self._port}")
+        self.rep_socket.bind(f"tcp://{self._hostname}:{self._port}")
+        self._listener_thread = threading.Thread(target=self.listen_for_requests, daemon=True)
+        self._listener_thread.start()
+        self.req_sockets = {}
+        logger.info(f"Rank {self.rank} connected to the server")
+
+    @property
+    def rank(self):
+        return self.data_pipe.kv_group_rank
+    
+    def send_tensor(
+        self,
+        tensor: torch.Tensor,
+        tensor_id: str,
+        remote_address: typing.Optional[str] = None,
+    ):
+        logger.debug(f"Rank {self.rank} sending tensor {tensor_id} to {remote_address}")
+        return self._send_tensor(tensor, tensor_id, remote_address)
+
+    def recv_tensor(
+        self,
+        tensor_id: str,
+        remote_address: typing.Optional[str] = None,
+    ) -> torch.Tensor:
+        ret = self._recv_tensor(tensor_id, remote_address)
+        return ret
+
+    def _send_tensor(
+        self,
+        tensor: torch.Tensor,
+        tensor_id: str,
+        remote_address: typing.Optional[str] = None,
+    ):
+        logger.debug(f"Rank {self.rank} storing tensor with id {tensor_id} of shape {tensor.shape} and dtype {tensor.dtype}")
+        if remote_address is None:
+            self.store[tensor_id] = tensor
+        else:
+            # tensor_shape = "_".join(str(dim) for dim in tensor.shape)
+            # tensor_dtype = str(tensor.dtype)
+            if remote_address not in self.req_sockets:
+                self.req_sockets[remote_address] = self.context.socket(zmq.REQ)
+                self.req_sockets[remote_address].connect(f"tcp://{remote_address}")
+
+            req_socket = self.req_sockets[remote_address]
+            # req_socket.connect(f"tcp://{remote_address}")
+            req_socket.send_string(f"PUT {self.rank} {tensor_id}")
+            dst_rank = req_socket.recv_string()
+            logger.debug(f"Rank {self.rank} sending tensor {tensor_id} to rank {dst_rank}")
+            self.data_pipe.send_tensor(tensor, int(dst_rank))
+
+    def _recv_tensor(
+        self,
+        tensor_id: str,
+        remote_address: typing.Optional[str] = None,
+    ) -> torch.Tensor:
+        logger.debug(f"Rank {self.rank} receiving tensor")
+        if remote_address is not None:
+            raise NotImplementedError("Getting tensor from remote rank not implemented")
+        if tensor_id in self.store:
+            logger.debug(f"Popping tensor {tensor_id} from store")
+            future = self.store.pop(tensor_id)
+            tensor = future.result() # TODO ptarasiewicz we should run other request instead of wait
+            logger.debug(f"Rank {self.rank} received tensor")
+            return tensor
+            
+        logger.debug(f"Rank {self.rank} waiting for tensor {tensor_id}")
+        time.sleep(0.001)
+        return self._recv_tensor(tensor_id, remote_address)
+        # raise NotImplementedError("Tensor not found in store")
+
+    def _receive_tensor(
+        self,
+        tensor_id: str,
+        rank: int,
+    ):
+        future = self.data_pipe.recv_tensor(rank)
+        logger.debug(f"Rank {self.rank} storing tensor {tensor_id} in store")
+        self.store[tensor_id] = future
+
+    def listen_for_requests(self):
+        while True:
+            cmd, rank, tensor_id = self.rep_socket.recv_string().split()
+            logger.debug(f"Rank {self.rank} received request for tensor {tensor_id}")
+            self.rep_socket.send_string(f"{self.rank}")
+            if cmd == "GET":
+                raise NotImplementedError("Getting tensor from remote rank not implemented")
+            elif cmd == "PUT":
+                rank = int(rank)
+                # shape = [int(dim) for dim in shape.split("_")]
+                # dtype = getattr(torch, dtype)
+                self._receive_tensor(tensor_id, rank)
diff --git a/vllm/distributed/kv_transfer/kv_pipe/pynccl_pipe.py b/vllm/distributed/kv_transfer/kv_pipe/pynccl_pipe.py
index e8bf607eb..fa5543fa9 100644
--- a/vllm/distributed/kv_transfer/kv_pipe/pynccl_pipe.py
+++ b/vllm/distributed/kv_transfer/kv_pipe/pynccl_pipe.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 """
     This module implements a PyNccl pipe for sending and receiving
     Optional[torch.Tensor] between distributed ranks with advanced
@@ -45,14 +58,16 @@ class PyNcclPipe(KVPipeBase):
     METADATA_DTYPE = torch.int64
 
     def __init__(self,
+                 kv_group_rank: int,
                  local_rank: int,
                  config: KVTransferConfig,
                  device: Optional[str] = None,
                  port_offset: int = 0):
         self.config = config
         self.local_rank = local_rank
-        self.kv_rank = self.config.kv_rank
+        self.kv_group_rank = kv_group_rank
         self.kv_parallel_size = self.config.kv_parallel_size
+        self.kv_world_size = self.config.kv_world_size
         if device is None:
             self.device = self._select_device(self.config.kv_buffer_device)
         else:
@@ -71,9 +86,6 @@ class PyNcclPipe(KVPipeBase):
         self.group.barrier()
         impl = self._get_device_send_recv_impl(self.group)
         self.device_send_func, self.device_recv_func = impl
-        # set target rank
-        self.target_rank_for_send = (self.kv_rank + 1) % self.kv_parallel_size
-        self.target_rank_for_recv = (self.kv_rank - 1) % self.kv_parallel_size
 
         # transportation-related variables
         self.transport_thread: Optional[ThreadPoolExecutor] = None
@@ -147,16 +159,16 @@ class PyNcclPipe(KVPipeBase):
                            dtype=metadata["dtype"],
                            device=self.device)
 
-    def _send_metadata(self, metadata: Metadata):
+    def _send_metadata(self, metadata: Metadata, target_rank: int):
         """
         Send the metadata dictionary to the target rank.
 
         Parameters:
             - metadata: A dictionary with keys "dtype" and "shape".
         """
-        self.group.send_obj(metadata, self.target_rank_for_send)
+        self.group.send_obj(metadata, target_rank)
 
-    def _recv_metadata(self) -> Metadata:
+    def _recv_metadata(self, src_rank: int) -> Metadata:
         """
         Receive the metadata dictionary from the target rank.
 
@@ -164,9 +176,9 @@ class PyNcclPipe(KVPipeBase):
             - metadata: A dictionary with keys "dtype" and "shape" describing
               the tensor.
         """
-        return self.group.recv_obj(self.target_rank_for_recv)
+        return self.group.recv_obj(src_rank)
 
-    def _send_impl(self, tensor: Optional[torch.Tensor]) -> None:
+    def _send_impl(self, tensor: Optional[torch.Tensor], target_rank: int) -> None:
         """
         The actual implementation of sending the tensor and its metadata to the
         target rank.
@@ -176,12 +188,12 @@ class PyNcclPipe(KVPipeBase):
               being sent.
         """
         metadata = self._make_metadata(tensor)
-        self._send_metadata(metadata)
+        self._send_metadata(metadata, target_rank)
         if tensor is not None:
             self.device_send_func(tensor.to(self.device),
-                                  self.target_rank_for_send)
+                                  target_rank)
 
-    def _recv_impl(self) -> Optional[torch.Tensor]:
+    def _recv_impl(self, src_rank: int) -> Optional[torch.Tensor]:
         """
         The actual implementation of receiving a tensor and its metadata from
         the target rank.
@@ -189,21 +201,22 @@ class PyNcclPipe(KVPipeBase):
         Returns:
             - buffer: The received tensor, or None if no tensor is received.
         """
-        metadata = self._recv_metadata()
+        metadata = self._recv_metadata(src_rank)
         if metadata["dtype"] is None:
             return None
         buffer = self._prepare_recv_buffer(metadata)
-        self.device_recv_func(buffer, self.target_rank_for_recv)
+        self.device_recv_func(buffer, src_rank)
 
         return buffer
 
     def send_tensor_wrapper(self, tensor: Optional[torch.Tensor],
-                            tensor_size: int) -> None:
+                            tensor_size: int,
+                            target_rank: int) -> None:
         """
         Wrapper for _send_impl to handle exceptions and update buffer size.
         """
         try:
-            self._send_impl(tensor)
+            self._send_impl(tensor, target_rank)
 
             with self.buffer_size_lock:
                 self.buffer_size -= tensor_size
@@ -222,7 +235,7 @@ class PyNcclPipe(KVPipeBase):
             logger.debug("KV cache transfer pipe is full. Waiting...")
             time.sleep(0.05)
 
-    def send_tensor(self, tensor: Optional[torch.Tensor]) -> None:
+    def send_tensor(self, tensor: Optional[torch.Tensor], target_rank: int) -> None:
         """
         Sends a tensor and its metadata to the destination rank in a
         non-blocking way.
@@ -230,6 +243,7 @@ class PyNcclPipe(KVPipeBase):
         Parameters:
             - tensor: The tensor to send, or None if no tensor is being sent.
         """
+        logger.debug("Rank %d sending tensor of shape %s dtype %s to rank %d", self.kv_group_rank, tensor.shape if tensor is not None else "None", tensor.dtype if tensor is not None else "None", target_rank)
         if self.transport_thread is None:
             self.transport_thread = ThreadPoolExecutor(max_workers=1)
 
@@ -243,32 +257,39 @@ class PyNcclPipe(KVPipeBase):
         with self.buffer_size_lock:
             self.buffer_size += tensor_size
 
-        self.transport_thread.submit(self.send_tensor_wrapper, tensor,
-                                     tensor_size)
+        future = self.transport_thread.submit(self.send_tensor_wrapper, tensor,
+                                     tensor_size,
+                                     target_rank)
+        return future
 
-    def recv_tensor(self) -> Optional[torch.Tensor]:
+    def recv_tensor(self, src_rank: int) -> Optional[torch.Tensor]:
         """
         Receives a tensor and its metadata from the source rank. Blocking call.
 
         Returns:
             - tensor: The received tensor, or None if no tensor is received.
         """
+
+        logger.debug("Rank %d receiving tensor from rank %d", self.kv_group_rank, src_rank)
+
         if self.transport_thread is None:
             self.transport_thread = ThreadPoolExecutor(max_workers=1)
 
-        future = self.transport_thread.submit(self._recv_impl)
+        future = self.transport_thread.submit(self._recv_impl, src_rank)
 
-        try:
-            tensor = future.result()
-        except Exception as e:
-            logger.error("Encountering exception in KV receiving thread")
-            logger.error("%s", e)
-            logger.error("My device: %s", self.device)
-            import traceback
-            traceback.print_exc()
-            raise e
+        return future
+
+        # try:
+        #     tensor = future.result()
+        # except Exception as e:
+        #     logger.error("Encountering exception in KV receiving thread")
+        #     logger.error("%s", e)
+        #     logger.error("My device: %s", self.device)
+        #     import traceback
+        #     traceback.print_exc()
+        #     raise e
 
-        return tensor
+        # return tensor
 
     def close(self):
         """
diff --git a/vllm/distributed/kv_transfer/kv_transfer_agent.py b/vllm/distributed/kv_transfer/kv_transfer_agent.py
index 1e80e0bd7..f06c7a5f6 100644
--- a/vllm/distributed/kv_transfer/kv_transfer_agent.py
+++ b/vllm/distributed/kv_transfer/kv_transfer_agent.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 """A centralized entrypoint to perform distributed KV cache transfer.
 
 This implementation is a shim wrapper on two APIs exposed by `kv_connector`:
@@ -35,6 +48,7 @@ class KVTransferAgent:
         rank: int,
         local_rank: int,
         config: "VllmConfig",
+        world_group,
     ):
 
         self.config = config
@@ -47,7 +61,7 @@ class KVTransferAgent:
             "TransferAgent should only be used when kv_connector is set."
 
         self.connector = KVConnectorFactory.create_connector(
-            rank, local_rank, config)
+            rank, local_rank, config, world_group)
 
     def send_kv_caches_and_hidden_states(
         self,
diff --git a/vllm/distributed/parallel_state.py b/vllm/distributed/parallel_state.py
index e0eeeffb8..9010c6966 100644
--- a/vllm/distributed/parallel_state.py
+++ b/vllm/distributed/parallel_state.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 # Copyright 2023 The vLLM team.
 # Adapted from
@@ -979,7 +992,8 @@ def ensure_kv_transfer_initialized(vllm_config: "VllmConfig") -> None:
         _KV_TRANSFER = kv_transfer.KVTransferAgent(
             rank=get_world_group().rank,
             local_rank=get_world_group().local_rank,
-            config=vllm_config)
+            config=vllm_config,
+            world_group=get_world_group())
 
 
 def ensure_model_parallel_initialized(
diff --git a/vllm/engine/arg_utils.py b/vllm/engine/arg_utils.py
index 975afe5ad..2208abea0 100644
--- a/vllm/engine/arg_utils.py
+++ b/vllm/engine/arg_utils.py
@@ -1159,7 +1159,7 @@ class EngineArgs:
         #   features and raise error for unsupported features.
         # * If VLLM_USE_V1=0, we disable V1.
         use_v1 = False
-        try_v1 = envs.VLLM_USE_V1 or not envs.is_set("VLLM_USE_V1")
+        try_v1 = envs.VLLM_USE_V1
         if try_v1 and self._is_v1_supported_oracle(model_config):
             use_v1 = True
 
diff --git a/vllm/engine/llm_engine.py b/vllm/engine/llm_engine.py
index 54f7b8fb6..0559f9db2 100644
--- a/vllm/engine/llm_engine.py
+++ b/vllm/engine/llm_engine.py
@@ -1,11 +1,28 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import copy
 import time
+import pickle
+import uuid
 from collections import Counter as collectionsCounter
 from collections import deque
+from collections import defaultdict
 from contextlib import contextmanager
 from dataclasses import dataclass
+from concurrent.futures import ThreadPoolExecutor
 from functools import partial
 from typing import (TYPE_CHECKING, Any, Callable, ClassVar, Deque, Dict,
                     Iterable, List, Literal, Mapping, NamedTuple, Optional)
@@ -62,6 +79,9 @@ from vllm.utils import (Counter, Device, deprecate_kwargs,
                         resolve_obj_by_qualname, weak_bind)
 from vllm.version import __version__ as VLLM_VERSION
 from vllm.worker.model_runner_base import InputProcessingError
+from vllm.remote_prefill import RemotePrefillRequest, RemotePrefillParams, MemoryTransferRequest, MemoryOpType
+from vllm.distributed.device_communicators.nixl import NixlMetadata
+
 
 logger = init_logger(__name__)
 _LOCAL_LOGGING_INTERVAL_SEC = 5
@@ -93,7 +113,7 @@ class OutputData(NamedTuple):
     # outputs from multiple steps.
     is_first_step_output: Optional[bool]
     skip: List[int]
-
+    remote_prefill_requests: Optional[List[RemotePrefillRequest]]
 
 class SchedulerContext:
 
@@ -107,11 +127,14 @@ class SchedulerContext:
 
         self.multi_step_stream_outputs: bool = multi_step_stream_outputs
 
+        self.remote_prefill_requests: List[RemotePrefillRequest] = []
+
     def append_output(self, outputs: List[SamplerOutput],
                       seq_group_metadata_list: List[SequenceGroupMetadata],
                       scheduler_outputs: SchedulerOutputs, is_async: bool,
                       is_last_step: bool,
-                      is_first_step_output: Optional[bool]):
+                      is_first_step_output: Optional[bool],
+                      remote_prefill_requests: Optional[List[RemotePrefillRequest]] = None):
         self.output_queue.append(
             OutputData(outputs=outputs,
                        seq_group_metadata_list=seq_group_metadata_list,
@@ -119,7 +142,9 @@ class SchedulerContext:
                        is_async=is_async,
                        is_last_step=is_last_step,
                        is_first_step_output=is_first_step_output,
-                       skip=[]))
+                       skip=[],
+                       remote_prefill_requests=remote_prefill_requests))
+
 
 
 class LLMEngine:
@@ -362,7 +387,7 @@ class LLMEngine:
             Scheduler = self.vllm_config.scheduler_config.scheduler_cls
         self.scheduler = [
             Scheduler(
-                self.scheduler_config, self.cache_config, self.lora_config,
+                self.model_config, self.scheduler_config, self.cache_config, self.lora_config,
                 self.parallel_config.pipeline_parallel_size,
                 self.async_callbacks[v_id]
                 if self.model_config.use_async_output_proc else None)
@@ -422,6 +447,39 @@ class LLMEngine:
         # Flag to set when an input fails to process and the engine should run
         # the next step without re-scheduling.
         self._skip_scheduling_next_step = False
+        self.engine_id = str(uuid.uuid4())
+        self._nixl_agents_names: Optional[List[str]] = None
+        if self.vllm_config.kv_transfer_config is not None and self.vllm_config.kv_transfer_config.kv_connector == "DynamoNixlConnector":
+            self._nixl_agents_names = self._initialize_nixl()
+
+        self._request_notif_counter = defaultdict(lambda: -self.parallel_config.tensor_parallel_size)
+        self._request_done_counter = defaultdict(lambda: -self.parallel_config.tensor_parallel_size)
+        self._finished_prefills = set()
+        self._finished_transfers = set()
+
+    @property
+    def is_nixl_initialized(self) -> bool:
+        return getattr(self, "_nixl_agents_names", None) is not None
+
+    def get_nixl_metadata(self) -> NixlMetadata:
+        if not self.is_nixl_initialized:
+            raise RuntimeError("Nixl is not initialized")
+        agent_metadata = self.model_executor.collective_rpc("get_nixl_agent_metadata")
+        kv_caches_base_addr = self.model_executor.collective_rpc("get_nixl_kv_caches_base_addr")
+        return NixlMetadata(engine_id=self.engine_id, agent_metadata=agent_metadata, kv_caches_base_addr=kv_caches_base_addr, num_blocks=self.cache_config.num_gpu_blocks)
+    
+    def add_remote_nixl_metadata(self, nixl_metadata: NixlMetadata) -> List[str]:
+        if not self.is_nixl_initialized:
+            raise RuntimeError("Nixl is not initialized")
+        engine_id = nixl_metadata.engine_id
+        agents_metadata = nixl_metadata.agent_metadata
+        kv_caches_base_addr = nixl_metadata.kv_caches_base_addr
+        num_blocks = nixl_metadata.num_blocks
+        return self.model_executor.collective_rpc("add_remote_nixl_metadata", args=(engine_id, agents_metadata, kv_caches_base_addr, num_blocks))
+
+    def _initialize_nixl(self) -> List[bytes]:
+        agents_names = self.model_executor.collective_rpc("initialize_nixl", args=(self.engine_id,))
+        return agents_names
 
     def _initialize_kv_caches(self) -> None:
         """Initialize the KV cache in the worker(s).
@@ -535,6 +593,8 @@ class LLMEngine:
         # Shutdown model executor when engine is garbage collected
         # Use getattr since __init__ can fail before the field is set
         if model_executor := getattr(self, "model_executor", None):
+            if self.is_nixl_initialized:
+                model_executor.collective_rpc("shutdown_nixl")
             model_executor.shutdown()
 
     def get_tokenizer_group(
@@ -587,11 +647,14 @@ class LLMEngine:
         prompt_adapter_request: Optional[PromptAdapterRequest],
         trace_headers: Optional[Mapping[str, str]] = None,
         priority: int = 0,
+        remote_prefill_params: Optional[RemotePrefillParams] = None,
     ) -> Optional[SequenceGroup]:
         """Add a processed request to the engine's request pool.
         return the created sequence group.
         """
         if isinstance(params, SamplingParams) and params.n > 1:
+            if remote_prefill_params is not None:
+                raise ValueError("Remote prefill params are not supported for multi-step sampling")
             ParallelSampleSequenceGroup.add_request(
                 request_id,
                 self,
@@ -609,12 +672,14 @@ class LLMEngine:
         # Create the sequences.
         block_size = self.cache_config.block_size
         seq_id = next(self.seq_counter)
+        if remote_prefill_params is not None and remote_prefill_params.is_remote_decode:
+            next(self.seq_counter) # empty sequence for staging
         eos_token_id = self.input_preprocessor.get_eos_token_id(lora_request)
 
         encoder_inputs, decoder_inputs = split_enc_dec_inputs(processed_inputs)
 
         seq = Sequence(seq_id, decoder_inputs, block_size, eos_token_id,
-                       lora_request, prompt_adapter_request)
+                       lora_request, prompt_adapter_request, remote_prefill_params)
 
         encoder_seq = (None if encoder_inputs is None else Sequence(
             seq_id, encoder_inputs, block_size, eos_token_id, lora_request,
@@ -631,8 +696,12 @@ class LLMEngine:
                 trace_headers=trace_headers,
                 prompt_adapter_request=prompt_adapter_request,
                 encoder_seq=encoder_seq,
-                priority=priority)
+                priority=priority,
+                remote_prefill_params=remote_prefill_params,
+            )
         elif isinstance(params, PoolingParams):
+            if remote_prefill_params is not None:
+                raise ValueError("Remote prefill params are not supported for pooling")
             seq_group = self._create_sequence_group_with_pooling(
                 request_id,
                 seq,
@@ -703,6 +772,7 @@ class LLMEngine:
             trace_headers: Optional[Mapping[str, str]] = None,
             prompt_adapter_request: Optional[PromptAdapterRequest] = None,
             priority: int = 0,
+            remote_prefill_params: Optional[RemotePrefillParams] = None,
             *,
             inputs: Optional[PromptType] = None,  # DEPRECATED
     ) -> None:
@@ -794,6 +864,7 @@ class LLMEngine:
             prompt_adapter_request=prompt_adapter_request,
             trace_headers=trace_headers,
             priority=priority,
+            remote_prefill_params=remote_prefill_params,
         )
 
     def _validate_token_prompt(self, prompt: PromptType,
@@ -828,6 +899,7 @@ class LLMEngine:
         prompt_adapter_request: Optional[PromptAdapterRequest] = None,
         encoder_seq: Optional[Sequence] = None,
         priority: int = 0,
+        remote_prefill_params: Optional[RemotePrefillParams] = None,
     ) -> SequenceGroup:
         """Creates a SequenceGroup with SamplingParams."""
         max_logprobs = self.get_model_config().max_logprobs
@@ -863,7 +935,9 @@ class LLMEngine:
             prompt_adapter_request=prompt_adapter_request,
             encoder_seq=encoder_seq,
             priority=priority,
-            draft_size=draft_size)
+            draft_size=draft_size,
+            remote_prefill_params=remote_prefill_params,
+        )
 
         return seq_group
 
@@ -1030,11 +1104,11 @@ class LLMEngine:
             # When we process only one request, no pop is required
             # (since later we will process all of the rest)
             (outputs, seq_group_metadata_list, scheduler_outputs, is_async,
-             is_last_step, is_first_step_output, skip) = ctx.output_queue[0]
+             is_last_step, is_first_step_output, skip, remote_prefill_requests) = ctx.output_queue[0]
         else:
             (outputs, seq_group_metadata_list, scheduler_outputs, is_async,
              is_last_step, is_first_step_output,
-             skip) = ctx.output_queue.popleft()
+             skip, remote_prefill_requests) = ctx.output_queue.popleft()
 
         # Sanity check
         assert len(seq_group_metadata_list) == len(
@@ -1360,6 +1434,12 @@ class LLMEngine:
 
         # Clear outputs for each new scheduler iteration
         ctx.request_outputs.clear()
+        ctx.remote_prefill_requests.clear()
+
+        remote_prefill_seq_group_metadata_list: List[SequenceGroupMetadata] = []
+        running_seq_group_metadata_list: List[SequenceGroupMetadata] = []
+        remote_prefill_scheduled_seq_groups: List[ScheduledSequenceGroup] = []
+        running_scheduled_seq_groups: List[ScheduledSequenceGroup] = []
 
         # Skip the scheduler if there are any remaining steps in the seq groups.
         # This ensures that the scheduler is only called again when the current
@@ -1372,7 +1452,41 @@ class LLMEngine:
             # Schedule iteration
             (seq_group_metadata_list, scheduler_outputs,
              allow_async_output_proc
-             ) = self.scheduler[virtual_engine].schedule()
+             ) = self.scheduler[virtual_engine].schedule(self._finished_prefills, self._finished_transfers)
+            
+
+            # Separate remote prefill and running seq groups
+            for seq_group_metadata, scheduled_seq_group in zip(seq_group_metadata_list, scheduler_outputs.scheduled_seq_groups):
+                if seq_group_metadata.do_remote_prefill:
+                    remote_prefill_seq_group_metadata_list.append(seq_group_metadata)
+                    remote_prefill_scheduled_seq_groups.append(scheduled_seq_group)
+                else:
+                    running_seq_group_metadata_list.append(seq_group_metadata)
+                    running_scheduled_seq_groups.append(scheduled_seq_group)
+
+            seq_group_metadata_list = running_seq_group_metadata_list
+            scheduler_outputs.scheduled_seq_groups = running_scheduled_seq_groups
+            
+            # Send remote prefill requests before model execution
+            for seq_group_metadata, scheduled_seq_group in zip(remote_prefill_seq_group_metadata_list, remote_prefill_scheduled_seq_groups):
+                assert len(scheduled_seq_group.seq_group.seqs) == 1
+                assert self._nixl_agents_names
+                seq_id = scheduled_seq_group.seq_group.seqs[0].seq_id
+                block_table = seq_group_metadata.block_tables[seq_id]
+                if len(block_table) == len(seq_group_metadata.computed_block_nums):
+                    logger.debug("No blocks to prefill")
+                    self._finished_prefills.add(seq_group_metadata.request_id)
+                    continue
+                remote_prefill_request = RemotePrefillRequest(
+                    request_id=seq_group_metadata.request_id,
+                    # prompt_token_ids=scheduled_seq_group.seq_group.seqs[0].inputs.prompt_token_ids[:-1], # last one will be decoded on decode for sampling anyway
+                    prompt_token_ids=scheduled_seq_group.seq_group.seqs[0].inputs.prompt_token_ids, # TODO ptarasiewicz do not send the last token when NIXL fixes send notif (needed for writing 0 blocks)
+                    sampling_params=scheduled_seq_group.seq_group.sampling_params,
+                    block_ids=block_table,
+                    engine_id=self.engine_id,
+                    computed_block_ids=seq_group_metadata.computed_block_nums,
+                )
+                scheduled_seq_group.seq_group.remote_prefill_params.remote_prefill_request_callback(remote_prefill_request)
 
             ctx.seq_group_metadata_list = seq_group_metadata_list
             ctx.scheduler_outputs = scheduler_outputs
@@ -1427,8 +1541,46 @@ class LLMEngine:
                 execute_model_req.async_callback = self.async_callbacks[
                     virtual_engine]
 
+            # After model execution, we need to transfer the memory from the prefill to the decode
+            memory_transfer_reqs = []
+            for scheduled_seq_group, seq_group_metadata in zip(scheduler_outputs.scheduled_seq_groups, seq_group_metadata_list):
+                remote_prefill_params = scheduled_seq_group.seq_group.remote_prefill_params
+                if remote_prefill_params is not None and remote_prefill_params.is_remote_decode:
+                    assert len(scheduled_seq_group.seq_group.seqs) == 1
+                    req_id = scheduled_seq_group.seq_group.request_id
+                    seq_id = scheduled_seq_group.seq_group.seqs[0].seq_id
+                    block_table = seq_group_metadata.block_tables[seq_id]
+                    staging_block_ids = seq_group_metadata.block_tables[seq_id + 1]
+
+                    num_computed_blocks = len(seq_group_metadata.computed_block_nums)
+                    computed_decode_block_ids = remote_prefill_params.decode_block_ids[:num_computed_blocks]
+
+                    if computed_decode_block_ids:
+                        kv_recv_req = MemoryTransferRequest(
+                            request_id=req_id,
+                            local_block_ids=block_table[:num_computed_blocks],
+                            staging_block_ids=staging_block_ids[:num_computed_blocks],
+                            remote_block_ids=computed_decode_block_ids,
+                            remote_engine_id=remote_prefill_params.decode_engine_id,
+                            notify_msg=req_id,
+                            op_type=MemoryOpType.READ
+                        )
+                        memory_transfer_reqs.append(kv_recv_req)
+
+                    kv_send_req = MemoryTransferRequest(
+                        request_id=req_id,
+                        local_block_ids=block_table[num_computed_blocks:],
+                        staging_block_ids=staging_block_ids[num_computed_blocks:],
+                        remote_block_ids=remote_prefill_params.decode_block_ids[num_computed_blocks:],
+                        remote_engine_id=remote_prefill_params.decode_engine_id,
+                        notify_msg=req_id,
+                        op_type=MemoryOpType.WRITE
+                    )
+                    memory_transfer_reqs.append(kv_send_req)
+            execute_model_req.memory_transfer_requests = memory_transfer_reqs
+
             try:
-                outputs = self.model_executor.execute_model(
+                outputs, request_notif_counter, request_done_counter = self.model_executor.execute_model(
                     execute_model_req=execute_model_req)
                 self._skip_scheduling_next_step = False
             except InputProcessingError as e:
@@ -1444,7 +1596,6 @@ class LLMEngine:
                     allow_async_output_proc=allow_async_output_proc)
                 # Raise so the caller is notified that this request failed
                 raise
-
             # We need to do this here so that last step's sampled_token_ids can
             # be passed to the next iteration for PP.
             if self.scheduler_config.is_multi_step:
@@ -1455,7 +1606,26 @@ class LLMEngine:
             if len(ctx.output_queue) > 0:
                 self._process_model_outputs(ctx=ctx)
             # No outputs in this case
-            outputs = []
+            execute_model_req = ExecuteModelRequest(
+                seq_group_metadata_list=[],
+                blocks_to_swap_in=[],
+                blocks_to_swap_out=[],
+                blocks_to_copy=[])
+
+            outputs, request_notif_counter, request_done_counter = self.model_executor.execute_model(
+                execute_model_req=execute_model_req)
+            
+        for req_id, notif_count in request_notif_counter.items():
+            self._request_notif_counter[req_id] += notif_count
+            if self._request_notif_counter[req_id] > -1:
+                self._finished_prefills.add(req_id)
+                del self._request_notif_counter[req_id]
+
+        for req_id, done_count in request_done_counter.items():
+            self._request_done_counter[req_id] += done_count
+            if self._request_done_counter[req_id] > -1:
+                self._finished_transfers.add(req_id)
+                del self._request_done_counter[req_id]
 
         # Finish the current step for all the sequence groups.
         if self.scheduler_config.is_multi_step:
@@ -1515,7 +1685,7 @@ class LLMEngine:
             # queued control plane messages, such as add/remove lora adapters.
             logger.debug("Stopping remote worker execution loop.")
             self.model_executor.stop_remote_worker_execution_loop()
-
+            
         return ctx.request_outputs
 
     def _abort_and_cache_schedule(
diff --git a/vllm/engine/multiprocessing/__init__.py b/vllm/engine/multiprocessing/__init__.py
index cafd8150b..6a5e45b4e 100644
--- a/vllm/engine/multiprocessing/__init__.py
+++ b/vllm/engine/multiprocessing/__init__.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import uuid
 from dataclasses import dataclass, field
@@ -14,13 +27,17 @@ from vllm.outputs import RequestOutput
 from vllm.prompt_adapter.request import PromptAdapterRequest
 from vllm.sampling_params import SamplingParams
 from vllm.utils import Device, deprecate_kwargs
-
+from vllm.remote_prefill import RemotePrefillParams
+from vllm.distributed.device_communicators.nixl import NixlMetadata
 VLLM_RPC_SUCCESS_STR = "SUCCESS"
 
 IPC_INPUT_EXT = "_input_socket"
 IPC_OUTPUT_EXT = "_output_socket"
 IPC_HEALTH_EXT = "_health_socket"
 IPC_DATA_EXT = "_data_socket"
+IPC_REMOTE_PREFILL_REQUEST_EXT = "_remote_prefill_request_socket"
+IPC_REMOTE_NIXL_METADATA_EXT = "_remote_nixl_metadata_socket"
+IPC_METRICS_EXT = "_metrics_socket"
 
 
 class MQEngineDeadError(RuntimeError):
@@ -36,6 +53,7 @@ class RPCProcessRequest:
     trace_headers: Optional[Mapping[str, str]] = None
     prompt_adapter_request: Optional[PromptAdapterRequest] = None
     priority: int = 0
+    remote_prefill_params: Optional[RemotePrefillParams] = None
 
     @overload
     def __init__(
@@ -78,6 +96,7 @@ class RPCProcessRequest:
             trace_headers: Optional[Mapping[str, str]] = None,
             prompt_adapter_request: Optional[PromptAdapterRequest] = None,
             priority: int = 0,
+            remote_prefill_params: Optional[RemotePrefillParams] = None,
             *,
             inputs: Optional[PromptType] = None,  # DEPRECATED
     ) -> None:
@@ -95,7 +114,7 @@ class RPCProcessRequest:
         self.trace_headers = trace_headers
         self.prompt_adapter_request = prompt_adapter_request
         self.priority = priority
-
+        self.remote_prefill_params = remote_prefill_params
 
 @dataclass
 class RPCError:
@@ -113,9 +132,21 @@ class RPCStartupRequest(Enum):
     IS_SERVER_READY = 1
 
 
+@dataclass
+class RPCHasUnfinishedRequestsRequest:
+    request_id: str = field(default_factory=lambda: str(uuid.uuid4()))
+
+
 @dataclass
 class RPCStartupResponse:
     tracing_enabled: bool
+    nixl_metadata: Optional[bytes] = None
+
+
+@dataclass
+class RPCHasUnfinishedRequestsResponse:
+    has_unfinished_requests: bool
+    request_id: str
 
 
 class RPCUProfileRequest(Enum):
@@ -165,10 +196,10 @@ class RPCAdapterLoadedResponse:
 RPC_REQUEST_T = Union[RPCProcessRequest, RPCAbortRequest, RPCStartupRequest,
                       RPCUProfileRequest, RPCLoadAdapterRequest,
                       RPCResetPrefixCacheRequest, RPCSleepRequest,
-                      RPCWakeUpRequest, RPCIsSleepingRequest]
+                      RPCWakeUpRequest, RPCIsSleepingRequest, RPCHasUnfinishedRequestsRequest]
 
 REQUEST_OUTPUTS_T = Union[List[RequestOutput], RPCAdapterLoadedResponse,
-                          RPCIsSleepingResponse, RPCError]
+                          RPCIsSleepingResponse, RPCError, RPCHasUnfinishedRequestsResponse]
 
 
 def ENGINE_DEAD_ERROR(
@@ -181,3 +212,13 @@ def ENGINE_DEAD_ERROR(
     return MQEngineDeadError(
         "Engine loop is not running. Inspect the stacktrace to "
         f"find the original error: {repr(error)}.")
+
+@dataclass
+class KvMetrics:
+    request_active_slots: int
+    request_total_slots: int
+    kv_active_blocks: int
+    kv_total_blocks: int
+    num_requests_waiting: int
+    gpu_cache_usage_perc: float
+    gpu_prefix_cache_hit_rate: float
diff --git a/vllm/engine/multiprocessing/client.py b/vllm/engine/multiprocessing/client.py
index f058b1329..2fdb5b8bf 100644
--- a/vllm/engine/multiprocessing/client.py
+++ b/vllm/engine/multiprocessing/client.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import asyncio
 import copy
@@ -8,6 +21,7 @@ from typing import (Any, AsyncGenerator, Dict, Iterator, List, Mapping,
                     Optional, Union, cast, overload)
 
 import cloudpickle
+import msgspec
 import psutil
 import zmq
 import zmq.asyncio
@@ -18,14 +32,17 @@ from zmq.asyncio import Socket
 from vllm import PoolingParams
 from vllm.config import DecodingConfig, ModelConfig, VllmConfig
 from vllm.core.scheduler import SchedulerOutputs
+from vllm.engine.metrics import Stats
 # yapf conflicts with isort for this block
 # yapf: disable
 from vllm.engine.async_llm_engine import (
     build_guided_decoding_logits_processor_async)
 from vllm.engine.multiprocessing import (ENGINE_DEAD_ERROR, IPC_DATA_EXT,
                                          IPC_HEALTH_EXT, IPC_INPUT_EXT,
-                                         IPC_OUTPUT_EXT, RPC_REQUEST_T,
-                                         VLLM_RPC_SUCCESS_STR, RPCAbortRequest,
+                                         IPC_OUTPUT_EXT, IPC_REMOTE_PREFILL_REQUEST_EXT,
+                                         RPC_REQUEST_T,
+                                         VLLM_RPC_SUCCESS_STR, IPC_REMOTE_NIXL_METADATA_EXT, RPCAbortRequest,
+                                         IPC_METRICS_EXT,
                                          RPCAdapterLoadedResponse, RPCError,
                                          RPCIsSleepingRequest,
                                          RPCIsSleepingResponse,
@@ -33,8 +50,9 @@ from vllm.engine.multiprocessing import (ENGINE_DEAD_ERROR, IPC_DATA_EXT,
                                          RPCProcessRequest,
                                          RPCResetPrefixCacheRequest,
                                          RPCSleepRequest, RPCStartupRequest,
-                                         RPCStartupResponse,
-                                         RPCUProfileRequest, RPCWakeUpRequest)
+                                         RPCStartupResponse, RPCHasUnfinishedRequestsRequest,
+                                         RPCHasUnfinishedRequestsResponse,
+                                         RPCUProfileRequest, KvMetrics, RPCWakeUpRequest)
 from vllm.engine.protocol import EngineClient
 # yapf: enable
 from vllm.envs import VLLM_RPC_TIMEOUT
@@ -48,6 +66,8 @@ from vllm.prompt_adapter.request import PromptAdapterRequest
 from vllm.sampling_params import SamplingParams
 from vllm.transformers_utils.tokenizer_group import init_tokenizer_from_configs
 from vllm.utils import Device, deprecate_kwargs
+from vllm.remote_prefill import RemotePrefillParams, RemotePrefillRequest, RemotePrefillRequestCallback
+from vllm.distributed.device_communicators.nixl import NixlMetadata
 
 logger = init_logger(__name__)
 
@@ -93,6 +113,7 @@ class MQLLMEngineClient(EngineClient):
         self._errored_with: Optional[BaseException] = None
 
         # Get the configs.
+        self.vllm_config = engine_config
         self.model_config = engine_config.model_config
         self.decoding_config = engine_config.decoding_config
 
@@ -117,6 +138,10 @@ class MQLLMEngineClient(EngineClient):
         self.heartbeat_socket: Socket = self.context.socket(zmq.constants.PULL)
         self.heartbeat_socket.connect(f"{ipc_path}{IPC_HEALTH_EXT}")
 
+        # Metrics.
+        self.metrics_socket: Socket = self.context.socket(zmq.constants.PULL)
+        self.metrics_socket.connect(f"{ipc_path}{IPC_METRICS_EXT}")
+
         # IPC path for the data socket.
         self.data_ipc_path = f"{ipc_path}{IPC_DATA_EXT}"
 
@@ -131,8 +156,27 @@ class MQLLMEngineClient(EngineClient):
         # Loop to check health of the LLMEngine periodically.
         # Started after the MQLLMEngine is ready.
         self.health_loop: Optional[asyncio.Task] = None
+
+        # Loop to check metrics of the LLMEngine periodically.
+        # Started after the MQLLMEngine is ready.
+        self.metrics_loop: Optional[asyncio.Task] = None
+        self.metrics_publisher = None
+
         self._engine_process = psutil.Process(engine_pid)
 
+        self.nixl_metadata: Optional[NixlMetadata] = None
+        self.remote_prefill_request_socket: Socket = self.context.socket(zmq.constants.PULL)
+        self.remote_nixl_metadata_socket: Socket = self.context.socket(zmq.constants.PUSH)
+        self.remote_prefill_requests_callback: Dict[str, RemotePrefillRequestCallback] = {}
+        if self.using_nixl_connector:
+            self.remote_prefill_request_socket.connect(f"{ipc_path}{IPC_REMOTE_PREFILL_REQUEST_EXT}")
+            self.remote_nixl_metadata_socket.connect(f"{ipc_path}{IPC_REMOTE_NIXL_METADATA_EXT}")
+
+    
+    @property
+    def using_nixl_connector(self) -> bool:
+        return self.vllm_config.kv_transfer_config is not None and self.vllm_config.kv_transfer_config.kv_connector == "DynamoNixlConnector"
+
     @staticmethod
     def is_unsupported_config(vllm_config: VllmConfig):
         # Pipeline parallel not yet supported
@@ -182,6 +226,61 @@ class MQLLMEngineClient(EngineClient):
         except Exception as e:
             self._set_errored(e)
 
+    async def run_remote_prefill_request_handler_loop(self):
+        try:
+            while True:
+                if await self.remote_prefill_request_socket.poll(timeout=VLLM_RPC_TIMEOUT):
+                    frames = await self.remote_prefill_request_socket.recv(copy=False)
+                    remote_prefill_request = msgspec.msgpack.decode(frames.buffer, type=RemotePrefillRequest)
+                    await self.remote_prefill_requests_callback[remote_prefill_request.request_id](remote_prefill_request)
+        except asyncio.CancelledError:
+            logger.debug("Shutting down MQLLMEngineClient remote prefill request handler loop.")
+            
+    async def run_metrics_loop(self, timeout: int):
+        """Background loop that continually checks to ensure the engine process
+        is still alive.
+        """
+        try:
+            while True:
+                # Check if the engine process is running:
+                if not self._engine_process.is_running() or (
+                        self._engine_process.status() == psutil.STATUS_ZOMBIE):
+                    # NB: is_running() returns True for zombies
+                    self._set_errored(
+                        RuntimeError(
+                            f"Engine process (pid {self._engine_process.pid}) "
+                            "died."))
+                    break
+
+                if await self.metrics_socket.poll(timeout=timeout):
+                    # Metrics received- check the message
+                    message: Frame = await self.metrics_socket.recv(copy=False)
+                    metrics = pickle.loads(message.buffer)
+                    if self.metrics_publisher is not None and isinstance(
+                        metrics, KvMetrics
+                    ):
+                        self.metrics_publisher.publish(metrics.request_active_slots,
+                                                    metrics.request_total_slots,
+                                                    metrics.kv_active_blocks,
+                                                    metrics.kv_total_blocks,
+                                                    metrics.num_requests_waiting, 
+                                                    metrics.gpu_cache_usage_perc, 
+                                                    metrics.gpu_prefix_cache_hit_rate)
+                        logger.debug("Metrics successful.")
+
+                    # TODO: Investigate sending whole stats object
+
+        except asyncio.CancelledError:
+            logger.debug("Shutting down MQLLMEngineClient check metrics loop.")
+
+        except psutil.NoSuchProcess:
+            self._set_errored(
+                RuntimeError(
+                    f"Engine process (pid {self._engine_process.pid}) died."))
+
+        except Exception as e:
+            self._set_errored(e)
+
     async def run_output_handler_loop(self):
         """Get RequestOutputs from Engine and stream to Request Queues"""
 
@@ -250,7 +349,7 @@ class MQLLMEngineClient(EngineClient):
                 # Put each output into the appropriate queue.
                 elif isinstance(
                         request_outputs,
-                    (RPCAdapterLoadedResponse, RPCIsSleepingResponse)):
+                    (RPCAdapterLoadedResponse, RPCIsSleepingResponse, RPCHasUnfinishedRequestsResponse)):
                     self._add_output(request_outputs)
                 else:
                     for request_output in request_outputs:
@@ -261,7 +360,7 @@ class MQLLMEngineClient(EngineClient):
 
     def _add_output(self, request_output: Union[RequestOutput,
                                                 RPCAdapterLoadedResponse,
-                                                RPCIsSleepingResponse]):
+                                                RPCIsSleepingResponse, RPCHasUnfinishedRequestsResponse]):
         queue = self.output_queues.get(request_output.request_id)
         if queue is not None:
             queue.put_nowait(request_output)
@@ -283,12 +382,25 @@ class MQLLMEngineClient(EngineClient):
             # Wait until server is ready.
             response = await self._wait_for_server_rpc(socket)
 
+            if response.nixl_metadata is not None:
+                assert self.using_nixl_connector
+                self.nixl_metadata = msgspec.msgpack.decode(response.nixl_metadata, type=NixlMetadata)
+
             self.tracing_flag = response.tracing_enabled
 
             # Start health_loop.
             if self.health_loop is None:
                 self.health_loop = asyncio.create_task(
                     self.run_heartbeat_loop(timeout=VLLM_RPC_TIMEOUT))
+                
+            if self.using_nixl_connector:
+                self.remote_prefill_loop = asyncio.create_task(
+                    self.run_remote_prefill_request_handler_loop())
+                    
+            # Start metrics_loop.
+            if self.metrics_loop is None:
+                self.metrics_loop = asyncio.create_task(
+                    self.run_metrics_loop(timeout=VLLM_RPC_TIMEOUT))
 
     def close(self):
         """Destroy the ZeroMQ Context."""
@@ -298,6 +410,8 @@ class MQLLMEngineClient(EngineClient):
         # Cancel background tasks.
         if self.health_loop is not None:
             self.health_loop.cancel()
+        if self.metrics_loop is not None:
+            self.metrics_loop.cancel()
         if self.output_loop is not None:
             self.output_loop.cancel()
 
@@ -420,6 +534,9 @@ class MQLLMEngineClient(EngineClient):
         """
         if self._errored_with is not None:
             raise self._errored_with
+        
+    async def add_remote_nixl_metadata(self, nixl_metadata: NixlMetadata):
+        await self.remote_nixl_metadata_socket.send(msgspec.msgpack.encode(nixl_metadata), copy=False)
 
     @property
     def is_running(self) -> bool:
@@ -478,6 +595,7 @@ class MQLLMEngineClient(EngineClient):
         trace_headers: Optional[Mapping[str, str]] = None,
         prompt_adapter_request: Optional[PromptAdapterRequest] = None,
         priority: int = 0,
+        remote_prefill_params: Optional[RemotePrefillParams] = None,
         *,
         inputs: Optional[PromptType] = None  # DEPRECATED
     ) -> AsyncGenerator[RequestOutput, None]:
@@ -507,7 +625,8 @@ class MQLLMEngineClient(EngineClient):
 
         return self._process_request(prompt, sampling_params, request_id,
                                      lora_request, trace_headers,
-                                     prompt_adapter_request, priority)
+                                     prompt_adapter_request, priority,
+                                     remote_prefill_params)
 
     @overload
     def encode(
@@ -591,6 +710,7 @@ class MQLLMEngineClient(EngineClient):
         trace_headers: Optional[Mapping[str, str]] = None,
         prompt_adapter_request: Optional[PromptAdapterRequest] = None,
         priority: int = 0,
+        remote_prefill_params: Optional[RemotePrefillParams] = None,
     ) -> Union[AsyncGenerator[RequestOutput, None], AsyncGenerator[
             PoolingRequestOutput, None]]:
         """Send an RPCGenerateRequest to the RPCServer and stream responses."""
@@ -636,6 +756,12 @@ class MQLLMEngineClient(EngineClient):
             else:
                 lp_bytes = None
 
+            if remote_prefill_params is not None:
+                self.remote_prefill_requests_callback[request_id] = remote_prefill_params.remote_prefill_request_callback
+                remote_prefill_params.remote_prefill_request_callback = None
+            else:
+                remote_prefill_request_callback = None
+
             request_bytes = pickle.dumps(
                 RPCProcessRequest(
                     prompt=prompt,
@@ -645,11 +771,11 @@ class MQLLMEngineClient(EngineClient):
                     trace_headers=trace_headers,
                     prompt_adapter_request=prompt_adapter_request,
                     priority=priority,
+                    remote_prefill_params=remote_prefill_params,
                 ))
 
             # 3) Send the RPCGenerateRequest to the MQLLMEngine.
-            parts = (request_bytes,
-                     lp_bytes) if lp_bytes else (request_bytes, )
+            parts = (request_bytes, lp_bytes) if lp_bytes else (request_bytes,)
             await self.input_socket.send_multipart(parts, copy=False)
 
             # 4) Stream the RequestOutputs from the output queue. Note
@@ -740,3 +866,22 @@ class MQLLMEngineClient(EngineClient):
         # Raise on error, otherwise happily return None
         if isinstance(request_output, BaseException):
             raise request_output
+
+    def set_metrics_publisher(self, metrics_publisher):
+        self.metrics_publisher = metrics_publisher
+                
+    async def has_unfinished_requests(self) -> bool:
+        logger.info("Checking if there are unfinished requests")
+        if "has_unfinished_requests" not in self.output_queues:
+            logger.info("Creating has unfinished requests queue")
+            
+        request = RPCHasUnfinishedRequestsRequest()
+        queue: asyncio.Queue[Union[BaseException, RPCHasUnfinishedRequestsResponse]] = asyncio.Queue()
+        self.output_queues[request.request_id] = queue
+        request_bytes = pickle.dumps(request)
+        await self.input_socket.send_multipart((request_bytes, ), copy=False)
+        response = await queue.get()
+        self.output_queues.pop(request.request_id)
+        if isinstance(response, BaseException):
+            raise response
+        return response.has_unfinished_requests
diff --git a/vllm/engine/multiprocessing/engine.py b/vllm/engine/multiprocessing/engine.py
index 6ed5ae0a9..3a320c42c 100644
--- a/vllm/engine/multiprocessing/engine.py
+++ b/vllm/engine/multiprocessing/engine.py
@@ -1,13 +1,27 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import pickle
 import signal
 from contextlib import contextmanager
-from typing import Iterator, List, Optional, Union
+from typing import Iterator, List, Optional, Union, Dict
 
 import cloudpickle
+import time
 import zmq
-
+import msgspec
 from vllm import AsyncEngineArgs, SamplingParams
 from vllm.config import VllmConfig
 from vllm.engine.llm_engine import LLMEngine
@@ -15,8 +29,10 @@ from vllm.engine.llm_engine import LLMEngine
 # yapf: disable
 from vllm.engine.multiprocessing import (ENGINE_DEAD_ERROR, IPC_DATA_EXT,
                                          IPC_HEALTH_EXT, IPC_INPUT_EXT,
-                                         IPC_OUTPUT_EXT, REQUEST_OUTPUTS_T,
-                                         VLLM_RPC_SUCCESS_STR, RPCAbortRequest,
+                                         REQUEST_OUTPUTS_T,
+                                         VLLM_RPC_SUCCESS_STR, IPC_REMOTE_PREFILL_REQUEST_EXT,
+                                         RPCAbortRequest,
+                                         IPC_OUTPUT_EXT, IPC_METRICS_EXT,
                                          RPCAdapterLoadedResponse, RPCError,
                                          RPCIsSleepingRequest,
                                          RPCIsSleepingResponse,
@@ -25,13 +41,21 @@ from vllm.engine.multiprocessing import (ENGINE_DEAD_ERROR, IPC_DATA_EXT,
                                          RPCResetPrefixCacheRequest,
                                          RPCSleepRequest, RPCStartupRequest,
                                          RPCStartupResponse,
-                                         RPCUProfileRequest, RPCWakeUpRequest)
+                                         RPCHasUnfinishedRequestsRequest,
+                                         RPCHasUnfinishedRequestsResponse,
+                                         RPCUProfileRequest, RPCWakeUpRequest, KvMetrics,
+                                         IPC_REMOTE_NIXL_METADATA_EXT)
 # yapf: enable
 from vllm.logger import init_logger
 from vllm.outputs import RequestOutput
 from vllm.transformers_utils.config import (
     maybe_register_config_serialize_by_value)
 from vllm.usage.usage_lib import UsageContext
+from vllm.remote_prefill import RemotePrefillRequest
+from vllm.distributed.device_communicators.nixl import NixlMetadata
+
+from vllm.engine.metrics_types import StatLoggerBase, Stats, SupportsMetricsInfo
+from dataclasses import dataclass, field
 from vllm.worker.model_runner_base import InputProcessingError
 
 logger = init_logger(__name__)
@@ -39,6 +63,77 @@ logger = init_logger(__name__)
 POLLING_TIMEOUT_MS = 10000
 HEALTHY_RESPONSE = (pickle.dumps(VLLM_RPC_SUCCESS_STR), )
 
+class KvStatLogger(StatLoggerBase):
+    def __init__(
+        self,
+        max_num_seqs: int,
+        num_total_gpu_blocks: int,
+        metrics_socket
+    ):
+        # Must query initialized scheduler for max infos
+        self.request_total_slots = max_num_seqs
+        self.kv_total_blocks = num_total_gpu_blocks
+        self.metrics_socket = metrics_socket
+
+        # KV metrics
+        self._send_kv_metrics(0, 0, 0, 0.0, 0.0)
+
+    def log(self, stats: Stats) -> None:
+        self._send_kv_metrics(
+            stats.num_running_sys,
+            int(stats.gpu_cache_usage_sys * self.kv_total_blocks),
+            stats.num_waiting_sys,
+            stats.gpu_cache_usage_sys,
+            stats.gpu_prefix_cache_hit_rate
+        )
+
+    def info(self, type: str, obj: SupportsMetricsInfo) -> None:
+        pass
+
+    def _send_kv_metrics(
+        self,
+        active_slots,
+        active_kv_blocks,
+        num_requests_waiting,
+        gpu_cache_usage_perc,
+        gpu_prefix_cache_hit_rate,
+    ):
+        if not self.metrics_socket.closed:
+            metrics_bytes = pickle.dumps(
+                KvMetrics(
+                    active_slots,
+                    self.request_total_slots,
+                    active_kv_blocks,
+                    self.kv_total_blocks,
+                    num_requests_waiting,
+                    gpu_cache_usage_perc,
+                    gpu_prefix_cache_hit_rate,
+                )
+            )
+            self.metrics_socket.send_multipart((metrics_bytes, ), copy=False)
+
+# TODO: Send entire stats object to the client
+# class StatLogger(StatLoggerBase):
+#     def __init__(
+#         self,
+#         metrics_socket
+#     ):
+#         self.metrics_socket = metrics_socket
+
+#     def log(self, stats: Stats) -> None:
+#         self._send_metrics(stats)
+
+#     def info(self, type: str, obj: SupportsMetricsInfo) -> None:
+#         pass
+
+#     def _send_metrics(self, stats: Stats):
+#         if not self.metrics_socket.closed:
+#             metrics_bytes = pickle.dumps(stats)
+#             self.metrics_socket.send_multipart((metrics_bytes, ), copy=False)
+
+
+
+
 
 class MQLLMEngine:
     """A multiprocessing wrapper for :class:`LLMEngine`.
@@ -101,12 +196,37 @@ class MQLLMEngine:
         self.heartbeat_socket = self.ctx.socket(zmq.constants.PUSH)
         self.heartbeat_socket.bind(f"{ipc_path}{IPC_HEALTH_EXT}")
 
+        # Send metrics back to client.
+        self.metrics_socket = self.ctx.socket(zmq.constants.PUSH)
+        self.metrics_socket.bind(f"{ipc_path}{IPC_METRICS_EXT}")
+
         # IPC path for the data socket.
         self.data_ipc_path = f"{ipc_path}{IPC_DATA_EXT}"
 
         # Error state.
         self._errored_with: Optional[BaseException] = None
 
+        self.remote_prefill_request_socket = self.ctx.socket(zmq.constants.PUSH)
+        self.remote_nixl_metadata_socket = self.ctx.socket(zmq.constants.PULL)
+        if self.engine.is_nixl_initialized:
+            self.remote_prefill_request_socket.bind(f"{ipc_path}{IPC_REMOTE_PREFILL_REQUEST_EXT}")
+            self.remote_nixl_metadata_socket.bind(f"{ipc_path}{IPC_REMOTE_NIXL_METADATA_EXT}")
+
+
+        # Attach logger for continuous metrics publishing
+        self.kv_stat_logger = KvStatLogger(
+            self.engine.scheduler_config.max_num_seqs,
+            self.engine.cache_config.num_gpu_blocks,
+            self.metrics_socket
+        )
+        self.engine.add_logger("kv_metrics", self.kv_stat_logger)
+        
+        # TODO investigate sending whole stats object
+        # self.general_stat_logger = StatLogger(
+        #     self.metrics_socket
+        # )
+        # self.engine.add_logger("general_metrics", self.general_stat_logger)
+
     @property
     def dead_error(self) -> BaseException:
         if self._errored_with is not None:
@@ -192,8 +312,17 @@ class MQLLMEngine:
                 # Handle the query from the Client.
                 if request == RPCStartupRequest.IS_SERVER_READY:
                     tracing_enabled = self.engine.is_tracing_enabled()
-                    response = RPCStartupResponse(
-                        tracing_enabled=tracing_enabled)
+            
+                    # Send nixl metadata to the client
+                    if self.engine.is_nixl_initialized:
+                        nixl_metadata = self.engine.get_nixl_metadata()
+                        encoded_nixl_metadata = msgspec.msgpack.encode(nixl_metadata)
+                        response = RPCStartupResponse(
+                            tracing_enabled=tracing_enabled,
+                            nixl_metadata=encoded_nixl_metadata)
+                    else:
+                        response = RPCStartupResponse(
+                            tracing_enabled=tracing_enabled)
 
             except Exception as e:
                 response = e
@@ -206,6 +335,7 @@ class MQLLMEngine:
 
         while True:
             if not self.engine.has_unfinished_requests():
+                logger.debug("No unfinished requests")
                 # Poll until there is work to do.
                 while self.input_socket.poll(timeout=POLLING_TIMEOUT_MS) == 0:
                     # When there's no work, check on engine health and send
@@ -249,6 +379,13 @@ class MQLLMEngine:
     def handle_new_input(self):
         """Handle new input from the socket"""
         try:
+            if self.engine.is_nixl_initialized:
+                while self.remote_nixl_metadata_socket.poll(timeout=0) != 0:
+                    frames = self.remote_nixl_metadata_socket.recv(copy=False)
+                    nixl_metadata = msgspec.msgpack.decode(frames.buffer, type=NixlMetadata)
+                    logger.debug("Adding remote nixl metadata for engine: %s", nixl_metadata.engine_id)
+                    self.engine.add_remote_nixl_metadata(nixl_metadata)
+
             while self.input_socket.poll(timeout=0) != 0:
                 frames = self.input_socket.recv_multipart(copy=False)
                 request = pickle.loads(frames[0].buffer)
@@ -277,6 +414,8 @@ class MQLLMEngine:
                     self.wake_up(request.tags)
                 elif isinstance(request, RPCIsSleepingRequest):
                     self._handle_is_sleeping_request(request)
+                elif isinstance(request, RPCHasUnfinishedRequestsRequest):
+                    self._handle_has_unfinished_requests_request(request)
                 else:
                     raise ValueError("Unknown RPCRequest Type: "
                                      f"{type(request)}")
@@ -297,6 +436,11 @@ class MQLLMEngine:
             self._send_outputs(rpc_err)
 
         try:
+            if request.remote_prefill_params is not None and request.remote_prefill_params.is_remote_prefill:
+                def remote_prefill_request_callback(request: RemotePrefillRequest):
+                    logger.debug("Sending remote prefill request: %s", request.request_id)
+                    self.remote_prefill_request_socket.send(msgspec.msgpack.encode(request), copy=False)
+                request.remote_prefill_params.remote_prefill_request_callback = remote_prefill_request_callback
             self.engine.add_request(
                 request_id=request_id,
                 prompt=request.prompt,
@@ -304,7 +448,9 @@ class MQLLMEngine:
                 lora_request=request.lora_request,
                 trace_headers=request.trace_headers,
                 prompt_adapter_request=request.prompt_adapter_request,
-                priority=request.priority)
+                priority=request.priority,
+                remote_prefill_params=request.remote_prefill_params,
+            )
 
             if self.log_requests:
                 logger.info("Added request %s.", request.request_id)
@@ -348,6 +494,10 @@ class MQLLMEngine:
         self._send_outputs(
             RPCIsSleepingResponse(request_id=request.request_id,
                                   is_sleeping=is_sleeping))
+        
+    def _handle_has_unfinished_requests_request(self, request: RPCHasUnfinishedRequestsRequest):
+        response =  RPCHasUnfinishedRequestsResponse(request_id=request.request_id, has_unfinished_requests=self.engine.has_unfinished_requests())
+        self._send_outputs(response)
 
     def _health_check(self):
         # Send unhealthy if engine has already errored
diff --git a/vllm/entrypoints/openai/serving_chat.py b/vllm/entrypoints/openai/serving_chat.py
index dd0b67df4..f436b0752 100644
--- a/vllm/entrypoints/openai/serving_chat.py
+++ b/vllm/entrypoints/openai/serving_chat.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import asyncio
 import json
@@ -41,6 +54,7 @@ from vllm.transformers_utils.tokenizer import AnyTokenizer, MistralTokenizer
 from vllm.transformers_utils.tokenizers import (maybe_serialize_tool_calls,
                                                 truncate_tool_call_ids,
                                                 validate_request_params)
+from vllm.remote_prefill import RemotePrefillParams
 
 logger = init_logger(__name__)
 
@@ -122,6 +136,7 @@ class OpenAIServingChat(OpenAIServing):
         self,
         request: ChatCompletionRequest,
         raw_request: Optional[Request] = None,
+        remote_prefill_params: Optional[RemotePrefillParams] = None,
     ) -> Union[AsyncGenerator[str, None], ChatCompletionResponse,
                ErrorResponse]:
         """
@@ -247,6 +262,7 @@ class OpenAIServingChat(OpenAIServing):
                         trace_headers=trace_headers,
                         prompt_adapter_request=prompt_adapter_request,
                         priority=request.priority,
+                        remote_prefill_params=remote_prefill_params,
                     )
 
                 generators.append(generator)
diff --git a/vllm/envs.py b/vllm/envs.py
index f80bf878f..f64c49fe8 100644
--- a/vllm/envs.py
+++ b/vllm/envs.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import hashlib
 import os
@@ -73,7 +86,7 @@ if TYPE_CHECKING:
     VLLM_ALLOW_RUNTIME_LORA_UPDATING: bool = False
     VLLM_SKIP_P2P_CHECK: bool = False
     VLLM_DISABLED_KERNELS: list[str] = []
-    VLLM_USE_V1: bool = True
+    VLLM_USE_V1: bool = False
     VLLM_ROCM_USE_AITER: bool = False
     VLLM_ROCM_USE_AITER_LINEAR: bool = True
     VLLM_ROCM_USE_AITER_MOE: bool = True
@@ -107,6 +120,10 @@ if TYPE_CHECKING:
     VLLM_TPU_BUCKET_PADDING_GAP: int = 0
     VLLM_USE_DEEP_GEMM: bool = False
     VLLM_XGRAMMAR_CACHE_MB: int = 0
+    VLLM_KV_CAPI_PATH: Optional[str] = None
+    VLLM_KV_NAMESPACE: Optional[str] = None
+    VLLM_KV_COMPONENT: Optional[str] = None
+    VLLM_WORKER_ID: Optional[int] = None
 
 
 def get_default_cache_root():
@@ -525,7 +542,7 @@ environment_variables: dict[str, Callable[[], Any]] = {
 
     # If set, use the V1 code path.
     "VLLM_USE_V1":
-    lambda: bool(int(os.getenv("VLLM_USE_V1", "1"))),
+    lambda: bool(int(os.getenv("VLLM_USE_V1", "0"))),
 
     # Disable aiter ops unless specifically enabled.
     # Acts as a parent switch to enable the rest of the other operations.
@@ -704,6 +721,21 @@ environment_variables: dict[str, Callable[[], Any]] = {
     # It can be changed with this variable if needed for some reason.
     "VLLM_XGRAMMAR_CACHE_MB":
     lambda: int(os.getenv("VLLM_XGRAMMAR_CACHE_MB", "512")),
+
+    # Path to the C API Library
+    "VLLM_KV_CAPI_PATH":
+    lambda: os.environ.get("VLLM_KV_CAPI_PATH", None),
+
+    # Identifiers to publish KV related information
+    "VLLM_KV_NAMESPACE":
+    lambda: os.environ.get("VLLM_KV_NAMESPACE", None),
+    "VLLM_KV_COMPONENT":
+    lambda: os.environ.get("VLLM_KV_COMPONENT", None),
+
+    # Worker ID used for identifying workers in distributed settings
+    "VLLM_WORKER_ID":
+    lambda: int(os.getenv("VLLM_WORKER_ID", "0"))
+    if "VLLM_WORKER_ID" in os.environ else None,
 }
 
 # end-env-vars-definition
diff --git a/vllm/model_executor/models/deepseek_v2.py b/vllm/model_executor/models/deepseek_v2.py
index 23b450aed..23fe6d7b8 100644
--- a/vllm/model_executor/models/deepseek_v2.py
+++ b/vllm/model_executor/models/deepseek_v2.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 # Adapted from
 # https://github.com/huggingface/transformers/blob/v4.28.0/src/transformers/models/llama/modeling_llama.py
diff --git a/vllm/outputs.py b/vllm/outputs.py
index 014e8d5d8..3ffc0f354 100644
--- a/vllm/outputs.py
+++ b/vllm/outputs.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import time
 from collections.abc import MutableSequence
@@ -6,16 +19,16 @@ from collections.abc import Sequence as GenericSequence
 from dataclasses import dataclass
 from typing import Generic, Optional, Union
 
+import msgspec
 import torch
 from typing_extensions import TypeVar, deprecated
 
 from vllm.lora.request import LoRARequest
 from vllm.multimodal.inputs import MultiModalPlaceholderDict
-from vllm.sampling_params import RequestOutputKind
+from vllm.sampling_params import RequestOutputKind, SamplingParams
 from vllm.sequence import (PromptLogprobs, RequestMetrics, SampleLogprobs,
                            SequenceGroup, SequenceGroupBase, SequenceStatus)
 
-
 @dataclass
 class CompletionOutput:
     """The output data of one completion output of a request.
diff --git a/vllm/platforms/__init__.py b/vllm/platforms/__init__.py
index 0ed221043..08dbc0e78 100644
--- a/vllm/platforms/__init__.py
+++ b/vllm/platforms/__init__.py
@@ -20,7 +20,8 @@ def vllm_version_matches_substr(substr: str) -> bool:
     """
     from importlib.metadata import PackageNotFoundError, version
     try:
-        vllm_version = version("vllm")
+        logger.warning("Using ai_dynamo_vllm")
+        vllm_version = version("ai_dynamo_vllm")
     except PackageNotFoundError as e:
         logger.warning(
             "The vLLM package was not found, so its version could not be "
diff --git a/vllm/remote_prefill.py b/vllm/remote_prefill.py
new file mode 100644
index 000000000..83f6cd575
--- /dev/null
+++ b/vllm/remote_prefill.py
@@ -0,0 +1,82 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from dataclasses import dataclass
+from typing import Callable, Optional, List
+from enum import Enum
+
+import msgspec
+
+from vllm.sampling_params import SamplingParams
+
+
+class RemotePrefillRequest(
+        msgspec.Struct,
+        omit_defaults=True,  # type: ignore[call-arg]
+        # required for @cached_property.
+        dict=True):
+    """The request data of one remote prefill output of a request.
+
+    Args:
+        engine_id: The unique ID of the engine.
+        request_id: The unique ID of the request.
+        prompt_token_ids: The token IDs of the prompt.
+        sampling_params: The sampling parameters.
+        block_ids: The block IDs of the request.
+        computed_block_ids: The computed block IDs of the request.
+    """
+    engine_id: str
+    request_id: str
+    prompt_token_ids: List[int]
+    sampling_params: SamplingParams
+    block_ids: List[int]
+    computed_block_ids: List[int]
+
+
+class MemoryOpType(str, Enum):
+    WRITE = "WRITE"
+    READ = "READ"
+
+
+class MemoryTransferRequest(
+        msgspec.Struct,
+        array_like=True,  # type: ignore[call-arg]
+        omit_defaults=True):  # type: ignore[call-arg]
+    """The request data of one memory transfer output of a request.
+
+    Args:
+        request_id: The unique ID of the request.
+    """
+    request_id: str
+    local_block_ids: List[int]
+    staging_block_ids: List[int]
+    remote_block_ids: List[int]
+    remote_engine_id: str
+    notify_msg: str
+    op_type: MemoryOpType
+
+
+RemotePrefillRequestCallback = Callable[[RemotePrefillRequest], None]
+
+
+@dataclass
+class RemotePrefillParams:
+    """Remote prefill parameters for text generation."""
+    is_remote_prefill: bool = False
+    is_remote_decode: bool = False
+    decode_block_ids: Optional[List[int]] = None
+    decode_computed_block_ids: Optional[List[int]] = None
+    decode_engine_id: Optional[str] = None
+    remote_prefill_request_callback: Optional[RemotePrefillRequestCallback] = None
\ No newline at end of file
diff --git a/vllm/sampling_params.py b/vllm/sampling_params.py
index 68ed99664..5b0b7e6dc 100644
--- a/vllm/sampling_params.py
+++ b/vllm/sampling_params.py
@@ -1,4 +1,18 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 """Sampling parameters for text generation."""
 import copy
 from dataclasses import dataclass
@@ -103,7 +117,7 @@ class RequestOutputKind(Enum):
     DELTA = 1
     # Do not return intermediate RequestOutput
     FINAL_ONLY = 2
-
+    
 
 class SamplingParams(
         msgspec.Struct,
diff --git a/vllm/sequence.py b/vllm/sequence.py
index 61867b025..8a07cf39e 100644
--- a/vllm/sequence.py
+++ b/vllm/sequence.py
@@ -1,4 +1,18 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 """Sequence and its related classes."""
 import copy
 import enum
@@ -20,6 +34,7 @@ from vllm.multimodal import MultiModalDataDict, MultiModalPlaceholderDict
 from vllm.pooling_params import PoolingParams
 from vllm.prompt_adapter.request import PromptAdapterRequest
 from vllm.sampling_params import RequestOutputKind, SamplingParams
+from vllm.remote_prefill import RemotePrefillParams, MemoryTransferRequest
 
 VLLM_TOKEN_ID_ARRAY_TYPE = "l"
 
@@ -59,13 +74,14 @@ class SequenceStatus(enum.IntEnum):
     """Status of a sequence."""
     WAITING = 0
     RUNNING = 1
-    SWAPPED = 2
-    # Note: anything after SWAPPED (2) will be considered
+    REMOTE_PREFILLING = 2
+    SWAPPED = 3
+    # Note: anything after SWAPPED (3) will be considered
     # as a finished status.
-    FINISHED_STOPPED = 3
-    FINISHED_LENGTH_CAPPED = 4
-    FINISHED_ABORTED = 5
-    FINISHED_IGNORED = 6
+    FINISHED_STOPPED = 4
+    FINISHED_LENGTH_CAPPED = 5
+    FINISHED_ABORTED = 6
+    FINISHED_IGNORED = 7
 
     @staticmethod
     def is_finished(status: "SequenceStatus") -> bool:
@@ -417,6 +433,7 @@ class Sequence:
         eos_token_id: Optional[int] = None,
         lora_request: Optional[LoRARequest] = None,
         prompt_adapter_request: Optional[PromptAdapterRequest] = None,
+        remote_prefill_params: Optional[RemotePrefillParams] = None,
     ) -> None:
         self.seq_id = seq_id
         self.inputs = SingletonInputsAdapter(inputs)
@@ -424,7 +441,7 @@ class Sequence:
         self.eos_token_id = eos_token_id
         self.lora_request = lora_request
         self.prompt_adapter_request = prompt_adapter_request
-
+        self.remote_prefill_params = remote_prefill_params
         self.data = SequenceData.from_seqs(self.prompt_token_ids)
         self.output_logprobs: SampleLogprobs = []
         self.output_text = ""
@@ -651,6 +668,7 @@ class SequenceGroup:
                     model; equal to max number of tokens a step can generate
                     for single-draft speculative decoding but larger than 
                     that for multi-draft SD (currently not supported).
+        remote_prefill_params: Remote prefill parameters.
     """
 
     def __init__(self,
@@ -665,7 +683,8 @@ class SequenceGroup:
                  trace_headers: Optional[Mapping[str, str]] = None,
                  prompt_adapter_request: Optional[PromptAdapterRequest] = None,
                  priority: int = 0,
-                 draft_size: int = 1) -> None:
+                 draft_size: int = 1,
+                 remote_prefill_params: Optional[RemotePrefillParams] = None) -> None:
         self.request_id = request_id
         self.seqs = seqs
         self.first_seq = seqs[0]
@@ -691,7 +710,7 @@ class SequenceGroup:
         self.encoder_seq = encoder_seq
         self.trace_headers = trace_headers
         self.priority = priority
-
+        self.remote_prefill_params = remote_prefill_params
         self.cached_request_output = None
 
     @property
@@ -940,6 +959,9 @@ class SequenceGroupMetadata(
             query tokens for prefill, we don't need sampling.
         token_chunk_size: The number of tokens to be processed (per sequence).
             None if chunking is not required.
+        do_remote_prefill: True if remote prefill is required.
+        do_remote_decode: True if remote decode is required.
+        decode_memory_desc: The memory descriptor for the decoder blocks.
         lora_request: LoRA request.
         computed_block_nums: The block numbers that are already computed,
             used in prefix caching.
@@ -979,6 +1001,9 @@ class SequenceGroupMetadata(
     cross_block_table: Optional[list[int]] = None
     prompt_adapter_request: Optional[PromptAdapterRequest] = None
     token_chunk_size: Optional[int] = None
+    do_remote_prefill: bool = False
+    do_remote_decode: bool = False
+    decode_memory_desc: Optional[bytes] = None
 
     ### Stateful fields that are lazily defined. ###
     # The number of speculative tokens adopted in this request.
@@ -1329,6 +1354,8 @@ class ExecuteModelRequest(
     last_sampled_token_ids: Optional[torch.Tensor] = None
     # Async callback
     async_callback: Optional[Callable] = None
+    # The memory transfer requests.
+    memory_transfer_requests: Optional[list[MemoryTransferRequest]] = None
 
     @property
     def is_first_multi_step(self) -> bool:
diff --git a/vllm/worker/model_runner.py b/vllm/worker/model_runner.py
index 9524a69f6..c314fbe8f 100644
--- a/vllm/worker/model_runner.py
+++ b/vllm/worker/model_runner.py
@@ -1,4 +1,17 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 import dataclasses
 import gc
@@ -1875,6 +1888,9 @@ class ModelRunner(GPUModelRunnerBase[ModelInputForGPUWithSamplingMetadata]):
 
         if self.vllm_config.kv_transfer_config is None:
             return False
+        
+        if self.vllm_config.kv_transfer_config.kv_connector == "DynamoNixlConnector":
+            return False
 
         prefill_meta = model_input.attn_metadata.prefill_metadata
 
@@ -1900,6 +1916,9 @@ class ModelRunner(GPUModelRunnerBase[ModelInputForGPUWithSamplingMetadata]):
 
         if self.vllm_config.kv_transfer_config is None:
             return False
+        
+        if self.vllm_config.kv_transfer_config.kv_connector == "DynamoNixlConnector":
+            return False
 
         prefill_meta = model_input.attn_metadata.prefill_metadata
 
diff --git a/vllm/worker/worker.py b/vllm/worker/worker.py
index d59f20f49..4c78301a9 100644
--- a/vllm/worker/worker.py
+++ b/vllm/worker/worker.py
@@ -1,8 +1,22 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 """A GPU worker class."""
 import gc
 import os
-from typing import Dict, List, Optional, Set, Tuple, Type, Union
+from typing import Dict, List, Optional, Set, Tuple, Type, Union, TYPE_CHECKING, Any
 
 import torch
 import torch.distributed
@@ -31,6 +45,9 @@ from vllm.worker.model_runner import GPUModelRunnerBase, ModelRunner
 from vllm.worker.pooling_model_runner import PoolingModelRunner
 from vllm.worker.worker_base import (LocalOrDistributedWorkerBase, WorkerBase,
                                      WorkerInput)
+from vllm.distributed.device_communicators.nixl import DynamoNixlConnector
+from vllm.remote_prefill import MemoryOpType
+
 
 logger = init_logger(__name__)
 
@@ -307,6 +324,46 @@ class Worker(LocalOrDistributedWorkerBase):
             self._init_cache_engine()
         self._warm_up_model()
 
+    def initialize_nixl(self, engine_id: str) -> List[bytes]:
+
+        # TODO ptarasiewicz nixl can also support DRAM
+        assert self.device_config.device_type == "cuda", "Currently only CUDA is supported for Nixl connector"
+
+        self.nixl_connector = DynamoNixlConnector(self.vllm_config, engine_id, self.local_rank) # TODO ptarasiewicz: rank or local_rank?
+        assert len(self.cache_engine) == 1, "Only one cache engine is supported for now"
+        self.nixl_connector.register_kv_caches(self.cache_engine[0].gpu_cache)
+        return self.nixl_connector.agent_name
+    
+    def get_nixl_agent_metadata(self) -> bytes:
+        assert self.nixl_connector is not None, "Nixl connector is not initialized"
+        return self.nixl_connector.get_agent_metadata()
+
+    def add_remote_nixl_metadata(self, engine_id: str, agents_metadata: List[bytes], kv_caches_base_addr: List[List[Tuple[int, int]]], num_blocks: int) -> str:
+        assert self.nixl_connector is not None, "Nixl connector is not initialized"
+        agent_name = self.nixl_connector.add_remote_agent(engine_id, agents_metadata, len(agents_metadata), kv_caches_base_addr, num_blocks) # TODO ptarasiewicz: rank or local_rank?
+        return agent_name
+    
+    def get_nixl_kv_caches_base_addr(self) -> List[bytes]:
+        assert self.nixl_connector is not None, "Nixl connector is not initialized"
+        return self.nixl_connector.kv_caches_base_addr[self.nixl_connector.engine_id]
+        
+    def _read_blocks(self, worker_input: WorkerInput) -> None:
+        for i, op_type in enumerate(worker_input.op_type):
+            if op_type == MemoryOpType.READ:
+                self.nixl_connector.read_blocks(worker_input.local_block_ids[i], worker_input.staging_block_ids[i], worker_input.remote_block_ids[i], worker_input.remote_engine_id[i])
+
+    def _write_blocks(self, worker_input: WorkerInput) -> None:
+        if not self.is_driver_worker:
+            torch.cuda.synchronize() # to make sure that the blocks are ready, on driver worker we transfer after sampling, so there's no need to synchronize
+
+        for i, op_type in enumerate(worker_input.op_type):
+            if op_type == MemoryOpType.WRITE:
+                self.nixl_connector.write_blocks(worker_input.local_block_ids[i], worker_input.staging_block_ids[i], worker_input.remote_block_ids[i], worker_input.remote_engine_id[i], worker_input.notify_msg[i])
+
+    def shutdown_nixl(self) -> None:
+        assert self.nixl_connector is not None, "Nixl connector is not initialized"
+        self.nixl_connector.shutdown()
+
     def _init_cache_engine(self):
         assert self.cache_config.num_gpu_blocks is not None
         self.cache_engine = [
@@ -368,6 +425,8 @@ class Worker(LocalOrDistributedWorkerBase):
         blocks_to_copy = torch.tensor(execute_model_req.blocks_to_copy,
                                       device=self.device,
                                       dtype=torch.int64).view(-1, 2)
+        
+        mem_transfer_reqs = execute_model_req.memory_transfer_requests or []
 
         return WorkerInput(
             num_seq_groups=num_seq_groups,
@@ -376,6 +435,12 @@ class Worker(LocalOrDistributedWorkerBase):
             blocks_to_copy=blocks_to_copy,
             virtual_engine=virtual_engine,
             num_steps=num_steps,
+            local_block_ids=[r.local_block_ids for r in mem_transfer_reqs],
+            staging_block_ids=[r.staging_block_ids for r in mem_transfer_reqs],
+            remote_block_ids=[r.remote_block_ids for r in mem_transfer_reqs],
+            remote_engine_id=[r.remote_engine_id for r in mem_transfer_reqs],
+            notify_msg=[r.notify_msg for r in mem_transfer_reqs],
+            op_type=[r.op_type for r in mem_transfer_reqs],
         )
 
     @torch.inference_mode()
diff --git a/vllm/worker/worker_base.py b/vllm/worker/worker_base.py
index e5662e693..ffcf1193a 100644
--- a/vllm/worker/worker_base.py
+++ b/vllm/worker/worker_base.py
@@ -1,4 +1,18 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 # SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 
 import dataclasses
 import os
@@ -9,6 +23,7 @@ from typing import Any, Dict, List, Optional, Set, Tuple, Type, Union
 import cloudpickle
 import torch
 import torch.nn as nn
+from collections import defaultdict
 
 from vllm.config import (ObservabilityConfig, VllmConfig,
                          set_current_vllm_config)
@@ -24,6 +39,9 @@ from vllm.utils import (enable_trace_function_call_for_thread,
 from vllm.worker.model_runner_base import (BroadcastableModelInput,
                                            ModelRunnerBase,
                                            ModelRunnerInputBase)
+from vllm.distributed.device_communicators.nixl import DynamoNixlConnector
+from vllm.remote_prefill import MemoryOpType
+
 
 logger = init_logger(__name__)
 
@@ -55,6 +73,9 @@ class WorkerBase:
         from vllm.platforms import current_platform
         self.current_platform = current_platform
 
+        self.nixl_connector: Optional[DynamoNixlConnector] = None
+
+    @abstractmethod
     def init_device(self) -> None:
         """Initialize device state, such as loading the model or other on-device
         memory allocations.
@@ -221,6 +242,13 @@ class WorkerInput:
     virtual_engine: int = 0
     num_steps: int = 1
 
+    local_block_ids: Optional[List[List[int]]] = None
+    staging_block_ids: Optional[List[List[int]]] = None
+    remote_block_ids: Optional[List[List[int]]] = None
+    remote_engine_id: Optional[List[str]] = None
+    notify_msg: Optional[List[str]] = None
+    op_type: Optional[List[MemoryOpType]] = None
+
     @classmethod
     def from_broadcasted_tensor_dict(
         cls: Type["WorkerInput"],
@@ -237,6 +265,12 @@ class WorkerInput:
             blocks_to_copy=tensor_dict.pop("blocks_to_copy"),
             virtual_engine=tensor_dict["virtual_engine"],
             num_steps=tensor_dict.pop("num_steps"),
+            local_block_ids=tensor_dict.pop("local_block_ids"),
+            staging_block_ids=tensor_dict.pop("staging_block_ids"),
+            remote_block_ids=tensor_dict.pop("remote_block_ids"),
+            remote_engine_id=tensor_dict.pop("remote_engine_id"),
+            notify_msg=tensor_dict.pop("notify_msg"),
+            op_type=tensor_dict.pop("op_type"),
         )
 
     def as_broadcastable_tensor_dict(
@@ -251,6 +285,12 @@ class WorkerInput:
             "blocks_to_copy": self.blocks_to_copy,
             "virtual_engine": self.virtual_engine,
             "num_steps": self.num_steps,
+            "local_block_ids": self.local_block_ids,
+            "staging_block_ids": self.staging_block_ids,
+            "remote_block_ids": self.remote_block_ids,
+            "remote_engine_id": self.remote_engine_id,
+            "notify_msg": self.notify_msg,
+            "op_type": self.op_type,
         }
 
         return tensor_dict
@@ -321,13 +361,16 @@ class LocalOrDistributedWorkerBase(WorkerBase):
             return None
 
         worker_input = WorkerInput.from_broadcasted_tensor_dict(broadcast_data)
-        model_input = (
-            self.model_runner.make_model_input_from_broadcasted_tensor_dict(
-                broadcast_data))
+        if worker_input.num_seq_groups > 0:
+            model_input = (
+                self.model_runner.make_model_input_from_broadcasted_tensor_dict(
+                    broadcast_data))
 
-        kwargs = extract_previous_hidden_states(broadcast_data)
+            kwargs = extract_previous_hidden_states(broadcast_data)
 
-        return model_input, worker_input, kwargs
+            return model_input, worker_input, kwargs
+        else:
+            return None, worker_input, {}
 
     def _get_driver_input_and_broadcast(
         self, execute_model_req: ExecuteModelRequest
@@ -403,49 +446,88 @@ class LocalOrDistributedWorkerBase(WorkerBase):
         self.execute_worker(worker_input)
 
         # If there is no input, we don't need to execute the model.
-        if worker_input.num_seq_groups == 0:
-            return []
+        if worker_input.num_seq_groups > 0:
+
+            self._read_blocks(worker_input)
+
+            intermediate_tensors = None
+            orig_model_execute_time = 0.0
+            if not get_pp_group().is_first_rank:
+                intermediate_tensors = IntermediateTensors(
+                    get_pp_group().recv_tensor_dict(
+                        all_gather_group=get_tp_group()))
+                if (self.observability_config is not None
+                        and self.observability_config.collect_model_execute_time):
+                    orig_model_execute_time = intermediate_tensors.tensors.get(
+                        "model_execute_time", torch.tensor(0)).item()
+
+            output = self.model_runner.execute_model(
+                model_input=model_input,
+                kv_caches=self.kv_cache[worker_input.virtual_engine]
+                if self.kv_cache is not None else None,
+                intermediate_tensors=intermediate_tensors,
+                num_steps=num_steps,
+                **kwargs,
+            )
 
-        intermediate_tensors = None
-        orig_model_execute_time = 0.0
-        if not get_pp_group().is_first_rank:
-            intermediate_tensors = IntermediateTensors(
-                get_pp_group().recv_tensor_dict(
-                    all_gather_group=get_tp_group()))
+            model_execute_time = time.perf_counter() - start_time
+            if not get_pp_group().is_last_rank:
+                # output is IntermediateTensors
+                assert isinstance(output, IntermediateTensors)
+                if (self.observability_config is not None
+                        and self.observability_config.collect_model_execute_time):
+                    output.tensors["model_execute_time"] = torch.tensor(
+                        model_execute_time + orig_model_execute_time)
+                get_pp_group().send_tensor_dict(output.tensors,
+                                                all_gather_group=get_tp_group())
+                return [None]
             if (self.observability_config is not None
-                    and self.observability_config.collect_model_execute_time):
-                orig_model_execute_time = intermediate_tensors.tensors.get(
-                    "model_execute_time", torch.tensor(0)).item()
-
-        output = self.model_runner.execute_model(
-            model_input=model_input,
-            kv_caches=self.kv_cache[worker_input.virtual_engine]
-            if self.kv_cache is not None else None,
-            intermediate_tensors=intermediate_tensors,
-            num_steps=num_steps,
-            **kwargs,
-        )
+                    and self.observability_config.collect_model_execute_time
+                    and output is not None):
+                for o in output:
+                    o.model_execute_time = (orig_model_execute_time +
+                                            model_execute_time)
 
-        model_execute_time = time.perf_counter() - start_time
-        if not get_pp_group().is_last_rank:
-            # output is IntermediateTensors
-            assert isinstance(output, IntermediateTensors)
-            if (self.observability_config is not None
-                    and self.observability_config.collect_model_execute_time):
-                output.tensors["model_execute_time"] = torch.tensor(
-                    model_execute_time + orig_model_execute_time)
-            get_pp_group().send_tensor_dict(output.tensors,
-                                            all_gather_group=get_tp_group())
-            return [None]
-        if (self.observability_config is not None
-                and self.observability_config.collect_model_execute_time
-                and output is not None):
-            for o in output:
-                o.model_execute_time = (orig_model_execute_time +
-                                        model_execute_time)
+            self._write_blocks(worker_input)
 
+        else:
+            output = []
+
+        # collect kv transfer notifications from non driver workers
+
+        if self.nixl_connector is not None:
+            new_notifs = self.nixl_connector.get_new_notifs()
+            rank = get_tp_group().rank
+            all_new_notifs = [new_notifs]
+            if rank > 0:
+                get_tp_group().send_object(new_notifs, dst=0)
+            else:
+                for i in range(1, get_tp_group().world_size):
+                    all_new_notifs.append(get_tp_group().recv_object(src=i))
+
+            request_notif_counter = defaultdict(int)
+            for notifs in all_new_notifs:
+                for req_ids in notifs.values():
+                    for req_id in req_ids:
+                        request_notif_counter[req_id.decode("utf-8")] += 1
+
+            if request_notif_counter:
+                logger.debug("Request notif counter: %s", request_notif_counter)
+
+            request_done_counter = defaultdict(int)
+            for req_id in self.nixl_connector.get_done_tranfers():
+                request_done_counter[req_id] += 1
+        else:
+            request_notif_counter = {}
+            request_done_counter = {}
         # output is List[SamplerOutput]
-        return output
+        return output, request_notif_counter, request_done_counter
+
+    def _read_blocks(self, worker_input: WorkerInput) -> None:
+        pass
+
+    def _write_blocks(self, worker_input: WorkerInput) -> None:
+        pass
 
     def _execute_model_spmd(
         self,
