# SPDX-FileCopyrightText: Copyright (c) 2024-2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
# SPDX-License-Identifier: Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

---
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  annotations:
    controller-gen.kubebuilder.io/version: v0.16.4
    helm.sh/resource-policy: keep
  name: dynamographdeployments.nvidia.com
spec:
  group: nvidia.com
  names:
    kind: DynamoGraphDeployment
    listKind: DynamoGraphDeploymentList
    plural: dynamographdeployments
    shortNames:
      - dgd
    singular: dynamographdeployment
  scope: Namespaced
  versions:
    - name: v1alpha1
      schema:
        openAPIV3Schema:
          description: DynamoGraphDeployment is the Schema for the dynamographdeployments API.
          properties:
            apiVersion:
              description: |-
                APIVersion defines the versioned schema of this representation of an object.
                Servers should convert recognized schemas to the latest internal value, and
                may reject unrecognized values.
                More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
              type: string
            kind:
              description: |-
                Kind is a string value representing the REST resource this object represents.
                Servers may infer this from the endpoint the client submits requests to.
                Cannot be updated.
                In CamelCase.
                More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
              type: string
            metadata:
              type: object
            spec:
              description: Spec defines the desired state for this graph deployment.
              properties:
                backendFramework:
                  description: BackendFramework specifies the backend framework (e.g., "sglang", "vllm", "trtllm").
                  enum:
                    - sglang
                    - vllm
                    - trtllm
                  type: string
                dynamoGraph:
                  description: |-
                    DynamoGraph selects the graph (workflow/topology) to deploy. This must match
                    a graph name packaged with the Dynamo archive.
                  type: string
                envs:
                  description: |-
                    Envs are environment variables applied to all services in the graph unless
                    overridden by service-specific configuration.
                  items:
                    description: EnvVar represents an environment variable present in a Container.
                    properties:
                      name:
                        description: Name of the environment variable. Must be a C_IDENTIFIER.
                        type: string
                      value:
                        description: |-
                          Variable references $(VAR_NAME) are expanded
                          using the previously defined environment variables in the container and
                          any service environment variables. If a variable cannot be resolved,
                          the reference in the input string will be unchanged. Double $$ are reduced
                          to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e.
                          "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)".
                          Escaped references will never be expanded, regardless of whether the variable
                          exists or not.
                          Defaults to "".
                        type: string
                      valueFrom:
                        description: Source for the environment variable's value. Cannot be used if value is not empty.
                        properties:
                          configMapKeyRef:
                            description: Selects a key of a ConfigMap.
                            properties:
                              key:
                                description: The key to select.
                                type: string
                              name:
                                default: ""
                                description: |-
                                  Name of the referent.
                                  This field is effectively required, but due to backwards compatibility is
                                  allowed to be empty. Instances of this type with an empty value here are
                                  almost certainly wrong.
                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                type: string
                              optional:
                                description: Specify whether the ConfigMap or its key must be defined
                                type: boolean
                            required:
                              - key
                            type: object
                            x-kubernetes-map-type: atomic
                          fieldRef:
                            description: |-
                              Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`,
                              spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
                            properties:
                              apiVersion:
                                description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                type: string
                              fieldPath:
                                description: Path of the field to select in the specified API version.
                                type: string
                            required:
                              - fieldPath
                            type: object
                            x-kubernetes-map-type: atomic
                          resourceFieldRef:
                            description: |-
                              Selects a resource of the container: only resources limits and requests
                              (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
                            properties:
                              containerName:
                                description: 'Container name: required for volumes, optional for env vars'
                                type: string
                              divisor:
                                anyOf:
                                  - type: integer
                                  - type: string
                                description: Specifies the output format of the exposed resources, defaults to "1"
                                pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                x-kubernetes-int-or-string: true
                              resource:
                                description: 'Required: resource to select'
                                type: string
                            required:
                              - resource
                            type: object
                            x-kubernetes-map-type: atomic
                          secretKeyRef:
                            description: Selects a key of a secret in the pod's namespace
                            properties:
                              key:
                                description: The key of the secret to select from.  Must be a valid secret key.
                                type: string
                              name:
                                default: ""
                                description: |-
                                  Name of the referent.
                                  This field is effectively required, but due to backwards compatibility is
                                  allowed to be empty. Instances of this type with an empty value here are
                                  almost certainly wrong.
                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                type: string
                              optional:
                                description: Specify whether the Secret or its key must be defined
                                type: boolean
                            required:
                              - key
                            type: object
                            x-kubernetes-map-type: atomic
                        type: object
                    required:
                      - name
                    type: object
                  type: array
                pvcs:
                  description: |-
                    PVCs defines a list of persistent volume claims that can be referenced by components.
                    Each PVC must have a unique name that can be referenced in component specifications.
                  items:
                    properties:
                      create:
                        description: Create indicates to create a new PVC
                        type: boolean
                      name:
                        description: Name is the name of the PVC
                        type: string
                      size:
                        anyOf:
                          - type: integer
                          - type: string
                        description: Size of the volume in Gi, used during PVC creation. Required when create is true.
                        pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                        x-kubernetes-int-or-string: true
                      storageClass:
                        description: StorageClass to be used for PVC creation. Required when create is true.
                        type: string
                      volumeAccessMode:
                        description: VolumeAccessMode is the volume access mode of the PVC. Required when create is true.
                        type: string
                    required:
                      - name
                    type: object
                    x-kubernetes-validations:
                      - message: When create is true, size, storageClass, and volumeAccessMode are required
                        rule: '!has(self.create) || self.create == false || (has(self.size) && has(self.storageClass) && has(self.volumeAccessMode))'
                  type: array
                services:
                  additionalProperties:
                    properties:
                      annotations:
                        additionalProperties:
                          type: string
                        description: |-
                          Annotations to add to generated Kubernetes resources for this component
                          (such as Pod, Service, and Ingress when applicable).
                        type: object
                      autoscaling:
                        description: Autoscaling config for this component (replica range, target utilization, etc.).
                        properties:
                          behavior:
                            description: |-
                              HorizontalPodAutoscalerBehavior configures the scaling behavior of the target
                              in both Up and Down directions (scaleUp and scaleDown fields respectively).
                            properties:
                              scaleDown:
                                description: |-
                                  scaleDown is scaling policy for scaling Down.
                                  If not set, the default value is to allow to scale down to minReplicas pods, with a
                                  300 second stabilization window (i.e., the highest recommendation for
                                  the last 300sec is used).
                                properties:
                                  policies:
                                    description: |-
                                      policies is a list of potential scaling polices which can be used during scaling.
                                      If not set, use the default values:
                                      - For scale up: allow doubling the number of pods, or an absolute change of 4 pods in a 15s window.
                                      - For scale down: allow all pods to be removed in a 15s window.
                                    items:
                                      description: HPAScalingPolicy is a single policy which must hold true for a specified past interval.
                                      properties:
                                        periodSeconds:
                                          description: |-
                                            periodSeconds specifies the window of time for which the policy should hold true.
                                            PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
                                          format: int32
                                          type: integer
                                        type:
                                          description: type is used to specify the scaling policy.
                                          type: string
                                        value:
                                          description: |-
                                            value contains the amount of change which is permitted by the policy.
                                            It must be greater than zero
                                          format: int32
                                          type: integer
                                      required:
                                        - periodSeconds
                                        - type
                                        - value
                                      type: object
                                    type: array
                                    x-kubernetes-list-type: atomic
                                  selectPolicy:
                                    description: |-
                                      selectPolicy is used to specify which policy should be used.
                                      If not set, the default value Max is used.
                                    type: string
                                  stabilizationWindowSeconds:
                                    description: |-
                                      stabilizationWindowSeconds is the number of seconds for which past recommendations should be
                                      considered while scaling up or scaling down.
                                      StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour).
                                      If not set, use the default values:
                                      - For scale up: 0 (i.e. no stabilization is done).
                                      - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
                                    format: int32
                                    type: integer
                                  tolerance:
                                    anyOf:
                                      - type: integer
                                      - type: string
                                    description: |-
                                      tolerance is the tolerance on the ratio between the current and desired
                                      metric value under which no updates are made to the desired number of
                                      replicas (e.g. 0.01 for 1%). Must be greater than or equal to zero. If not
                                      set, the default cluster-wide tolerance is applied (by default 10%).

                                      For example, if autoscaling is configured with a memory consumption target of 100Mi,
                                      and scale-down and scale-up tolerances of 5% and 1% respectively, scaling will be
                                      triggered when the actual consumption falls below 95Mi or exceeds 101Mi.

                                      This is an alpha field and requires enabling the HPAConfigurableTolerance
                                      feature gate.
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                type: object
                              scaleUp:
                                description: |-
                                  scaleUp is scaling policy for scaling Up.
                                  If not set, the default value is the higher of:
                                    * increase no more than 4 pods per 60 seconds
                                    * double the number of pods per 60 seconds
                                  No stabilization is used.
                                properties:
                                  policies:
                                    description: |-
                                      policies is a list of potential scaling polices which can be used during scaling.
                                      If not set, use the default values:
                                      - For scale up: allow doubling the number of pods, or an absolute change of 4 pods in a 15s window.
                                      - For scale down: allow all pods to be removed in a 15s window.
                                    items:
                                      description: HPAScalingPolicy is a single policy which must hold true for a specified past interval.
                                      properties:
                                        periodSeconds:
                                          description: |-
                                            periodSeconds specifies the window of time for which the policy should hold true.
                                            PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
                                          format: int32
                                          type: integer
                                        type:
                                          description: type is used to specify the scaling policy.
                                          type: string
                                        value:
                                          description: |-
                                            value contains the amount of change which is permitted by the policy.
                                            It must be greater than zero
                                          format: int32
                                          type: integer
                                      required:
                                        - periodSeconds
                                        - type
                                        - value
                                      type: object
                                    type: array
                                    x-kubernetes-list-type: atomic
                                  selectPolicy:
                                    description: |-
                                      selectPolicy is used to specify which policy should be used.
                                      If not set, the default value Max is used.
                                    type: string
                                  stabilizationWindowSeconds:
                                    description: |-
                                      stabilizationWindowSeconds is the number of seconds for which past recommendations should be
                                      considered while scaling up or scaling down.
                                      StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour).
                                      If not set, use the default values:
                                      - For scale up: 0 (i.e. no stabilization is done).
                                      - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
                                    format: int32
                                    type: integer
                                  tolerance:
                                    anyOf:
                                      - type: integer
                                      - type: string
                                    description: |-
                                      tolerance is the tolerance on the ratio between the current and desired
                                      metric value under which no updates are made to the desired number of
                                      replicas (e.g. 0.01 for 1%). Must be greater than or equal to zero. If not
                                      set, the default cluster-wide tolerance is applied (by default 10%).

                                      For example, if autoscaling is configured with a memory consumption target of 100Mi,
                                      and scale-down and scale-up tolerances of 5% and 1% respectively, scaling will be
                                      triggered when the actual consumption falls below 95Mi or exceeds 101Mi.

                                      This is an alpha field and requires enabling the HPAConfigurableTolerance
                                      feature gate.
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                type: object
                            type: object
                          enabled:
                            type: boolean
                          maxReplicas:
                            type: integer
                          metrics:
                            items:
                              description: |-
                                MetricSpec specifies how to scale based on a single metric
                                (only `type` and one other matching field should be set at once).
                              properties:
                                containerResource:
                                  description: |-
                                    containerResource refers to a resource metric (such as those specified in
                                    requests and limits) known to Kubernetes describing a single container in
                                    each pod of the current scale target (e.g. CPU or memory). Such metrics are
                                    built in to Kubernetes, and have special scaling options on top of those
                                    available to normal per-pod metrics using the "pods" source.
                                  properties:
                                    container:
                                      description: container is the name of the container in the pods of the scaling target
                                      type: string
                                    name:
                                      description: name is the name of the resource in question.
                                      type: string
                                    target:
                                      description: target specifies the target value for the given metric
                                      properties:
                                        averageUtilization:
                                          description: |-
                                            averageUtilization is the target value of the average of the
                                            resource metric across all relevant pods, represented as a percentage of
                                            the requested value of the resource for the pods.
                                            Currently only valid for Resource metric source type
                                          format: int32
                                          type: integer
                                        averageValue:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            averageValue is the target value of the average of the
                                            metric across all relevant pods (as a quantity)
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                        type:
                                          description: type represents whether the metric type is Utilization, Value, or AverageValue
                                          type: string
                                        value:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: value is the target value of the metric (as a quantity).
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - type
                                      type: object
                                  required:
                                    - container
                                    - name
                                    - target
                                  type: object
                                external:
                                  description: |-
                                    external refers to a global metric that is not associated
                                    with any Kubernetes object. It allows autoscaling based on information
                                    coming from components running outside of cluster
                                    (for example length of queue in cloud messaging service, or
                                    QPS from loadbalancer running outside of cluster).
                                  properties:
                                    metric:
                                      description: metric identifies the target metric by name and selector
                                      properties:
                                        name:
                                          description: name is the name of the given metric
                                          type: string
                                        selector:
                                          description: |-
                                            selector is the string-encoded form of a standard kubernetes label selector for the given metric
                                            When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping.
                                            When unset, just the metricName will be used to gather metrics.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                              items:
                                                description: |-
                                                  A label selector requirement is a selector that contains values, a key, and an operator that
                                                  relates the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      operator represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      values is an array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. This array is replaced during a strategic
                                                      merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: |-
                                                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                operator is "In", and the values array contains only "value". The requirements are ANDed.
                                              type: object
                                          type: object
                                          x-kubernetes-map-type: atomic
                                      required:
                                        - name
                                      type: object
                                    target:
                                      description: target specifies the target value for the given metric
                                      properties:
                                        averageUtilization:
                                          description: |-
                                            averageUtilization is the target value of the average of the
                                            resource metric across all relevant pods, represented as a percentage of
                                            the requested value of the resource for the pods.
                                            Currently only valid for Resource metric source type
                                          format: int32
                                          type: integer
                                        averageValue:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            averageValue is the target value of the average of the
                                            metric across all relevant pods (as a quantity)
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                        type:
                                          description: type represents whether the metric type is Utilization, Value, or AverageValue
                                          type: string
                                        value:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: value is the target value of the metric (as a quantity).
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - type
                                      type: object
                                  required:
                                    - metric
                                    - target
                                  type: object
                                object:
                                  description: |-
                                    object refers to a metric describing a single kubernetes object
                                    (for example, hits-per-second on an Ingress object).
                                  properties:
                                    describedObject:
                                      description: describedObject specifies the descriptions of a object,such as kind,name apiVersion
                                      properties:
                                        apiVersion:
                                          description: apiVersion is the API version of the referent
                                          type: string
                                        kind:
                                          description: 'kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
                                          type: string
                                        name:
                                          description: 'name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
                                          type: string
                                      required:
                                        - kind
                                        - name
                                      type: object
                                    metric:
                                      description: metric identifies the target metric by name and selector
                                      properties:
                                        name:
                                          description: name is the name of the given metric
                                          type: string
                                        selector:
                                          description: |-
                                            selector is the string-encoded form of a standard kubernetes label selector for the given metric
                                            When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping.
                                            When unset, just the metricName will be used to gather metrics.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                              items:
                                                description: |-
                                                  A label selector requirement is a selector that contains values, a key, and an operator that
                                                  relates the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      operator represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      values is an array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. This array is replaced during a strategic
                                                      merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: |-
                                                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                operator is "In", and the values array contains only "value". The requirements are ANDed.
                                              type: object
                                          type: object
                                          x-kubernetes-map-type: atomic
                                      required:
                                        - name
                                      type: object
                                    target:
                                      description: target specifies the target value for the given metric
                                      properties:
                                        averageUtilization:
                                          description: |-
                                            averageUtilization is the target value of the average of the
                                            resource metric across all relevant pods, represented as a percentage of
                                            the requested value of the resource for the pods.
                                            Currently only valid for Resource metric source type
                                          format: int32
                                          type: integer
                                        averageValue:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            averageValue is the target value of the average of the
                                            metric across all relevant pods (as a quantity)
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                        type:
                                          description: type represents whether the metric type is Utilization, Value, or AverageValue
                                          type: string
                                        value:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: value is the target value of the metric (as a quantity).
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - type
                                      type: object
                                  required:
                                    - describedObject
                                    - metric
                                    - target
                                  type: object
                                pods:
                                  description: |-
                                    pods refers to a metric describing each pod in the current scale target
                                    (for example, transactions-processed-per-second).  The values will be
                                    averaged together before being compared to the target value.
                                  properties:
                                    metric:
                                      description: metric identifies the target metric by name and selector
                                      properties:
                                        name:
                                          description: name is the name of the given metric
                                          type: string
                                        selector:
                                          description: |-
                                            selector is the string-encoded form of a standard kubernetes label selector for the given metric
                                            When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping.
                                            When unset, just the metricName will be used to gather metrics.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                              items:
                                                description: |-
                                                  A label selector requirement is a selector that contains values, a key, and an operator that
                                                  relates the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      operator represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      values is an array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. This array is replaced during a strategic
                                                      merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: |-
                                                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                operator is "In", and the values array contains only "value". The requirements are ANDed.
                                              type: object
                                          type: object
                                          x-kubernetes-map-type: atomic
                                      required:
                                        - name
                                      type: object
                                    target:
                                      description: target specifies the target value for the given metric
                                      properties:
                                        averageUtilization:
                                          description: |-
                                            averageUtilization is the target value of the average of the
                                            resource metric across all relevant pods, represented as a percentage of
                                            the requested value of the resource for the pods.
                                            Currently only valid for Resource metric source type
                                          format: int32
                                          type: integer
                                        averageValue:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            averageValue is the target value of the average of the
                                            metric across all relevant pods (as a quantity)
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                        type:
                                          description: type represents whether the metric type is Utilization, Value, or AverageValue
                                          type: string
                                        value:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: value is the target value of the metric (as a quantity).
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - type
                                      type: object
                                  required:
                                    - metric
                                    - target
                                  type: object
                                resource:
                                  description: |-
                                    resource refers to a resource metric (such as those specified in
                                    requests and limits) known to Kubernetes describing each pod in the
                                    current scale target (e.g. CPU or memory). Such metrics are built in to
                                    Kubernetes, and have special scaling options on top of those available
                                    to normal per-pod metrics using the "pods" source.
                                  properties:
                                    name:
                                      description: name is the name of the resource in question.
                                      type: string
                                    target:
                                      description: target specifies the target value for the given metric
                                      properties:
                                        averageUtilization:
                                          description: |-
                                            averageUtilization is the target value of the average of the
                                            resource metric across all relevant pods, represented as a percentage of
                                            the requested value of the resource for the pods.
                                            Currently only valid for Resource metric source type
                                          format: int32
                                          type: integer
                                        averageValue:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            averageValue is the target value of the average of the
                                            metric across all relevant pods (as a quantity)
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                        type:
                                          description: type represents whether the metric type is Utilization, Value, or AverageValue
                                          type: string
                                        value:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: value is the target value of the metric (as a quantity).
                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - type
                                      type: object
                                  required:
                                    - name
                                    - target
                                  type: object
                                type:
                                  description: |-
                                    type is the type of metric source.  It should be one of "ContainerResource", "External",
                                    "Object", "Pods" or "Resource", each mapping to a matching field in the object.
                                  type: string
                              required:
                                - type
                              type: object
                            type: array
                          minReplicas:
                            type: integer
                        type: object
                      componentType:
                        description: ComponentType indicates the role of this component (for example, "main").
                        type: string
                      dynamoNamespace:
                        description: Dynamo namespace of the service (allows to override the Dynamo namespace of the service defined in annotations inside the Dynamo archive)
                        type: string
                      envFromSecret:
                        description: |-
                          EnvFromSecret references a Secret whose key/value pairs will be exposed as
                          environment variables in the component containers.
                        type: string
                      envs:
                        description: Envs defines additional environment variables to inject into the component containers.
                        items:
                          description: EnvVar represents an environment variable present in a Container.
                          properties:
                            name:
                              description: Name of the environment variable. Must be a C_IDENTIFIER.
                              type: string
                            value:
                              description: |-
                                Variable references $(VAR_NAME) are expanded
                                using the previously defined environment variables in the container and
                                any service environment variables. If a variable cannot be resolved,
                                the reference in the input string will be unchanged. Double $$ are reduced
                                to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e.
                                "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)".
                                Escaped references will never be expanded, regardless of whether the variable
                                exists or not.
                                Defaults to "".
                              type: string
                            valueFrom:
                              description: Source for the environment variable's value. Cannot be used if value is not empty.
                              properties:
                                configMapKeyRef:
                                  description: Selects a key of a ConfigMap.
                                  properties:
                                    key:
                                      description: The key to select.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the ConfigMap or its key must be defined
                                      type: boolean
                                  required:
                                    - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                                fieldRef:
                                  description: |-
                                    Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`,
                                    spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
                                  properties:
                                    apiVersion:
                                      description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                      type: string
                                    fieldPath:
                                      description: Path of the field to select in the specified API version.
                                      type: string
                                  required:
                                    - fieldPath
                                  type: object
                                  x-kubernetes-map-type: atomic
                                resourceFieldRef:
                                  description: |-
                                    Selects a resource of the container: only resources limits and requests
                                    (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
                                  properties:
                                    containerName:
                                      description: 'Container name: required for volumes, optional for env vars'
                                      type: string
                                    divisor:
                                      anyOf:
                                        - type: integer
                                        - type: string
                                      description: Specifies the output format of the exposed resources, defaults to "1"
                                      pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                      x-kubernetes-int-or-string: true
                                    resource:
                                      description: 'Required: resource to select'
                                      type: string
                                  required:
                                    - resource
                                  type: object
                                  x-kubernetes-map-type: atomic
                                secretKeyRef:
                                  description: Selects a key of a secret in the pod's namespace
                                  properties:
                                    key:
                                      description: The key of the secret to select from.  Must be a valid secret key.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the Secret or its key must be defined
                                      type: boolean
                                  required:
                                    - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                              type: object
                          required:
                            - name
                          type: object
                        type: array
                      extraPodMetadata:
                        description: ExtraPodMetadata adds labels/annotations to the created Pods.
                        properties:
                          annotations:
                            additionalProperties:
                              type: string
                            type: object
                          labels:
                            additionalProperties:
                              type: string
                            type: object
                        type: object
                      extraPodSpec:
                        description: |-
                          ExtraPodSpec allows to override the main pod spec configuration.
                          It is a k8s standard PodSpec. It also contains a MainContainer (standard k8s Container) field
                          that allows overriding the main container configuration.
                        properties:
                          activeDeadlineSeconds:
                            description: |-
                              Optional duration in seconds the pod may be active on the node relative to
                              StartTime before the system will actively try to mark it failed and kill associated containers.
                              Value must be a positive integer.
                            format: int64
                            type: integer
                          affinity:
                            description: If specified, the pod's scheduling constraints
                            properties:
                              nodeAffinity:
                                description: Describes node affinity scheduling rules for the pod.
                                properties:
                                  preferredDuringSchedulingIgnoredDuringExecution:
                                    description: |-
                                      The scheduler will prefer to schedule pods to nodes that satisfy
                                      the affinity expressions specified by this field, but it may choose
                                      a node that violates one or more of the expressions. The node that is
                                      most preferred is the one with the greatest sum of weights, i.e.
                                      for each node that meets all of the scheduling requirements (resource
                                      request, requiredDuringScheduling affinity expressions, etc.),
                                      compute a sum by iterating through the elements of this field and adding
                                      "weight" to the sum if the node matches the corresponding matchExpressions; the
                                      node(s) with the highest sum are the most preferred.
                                    items:
                                      description: |-
                                        An empty preferred scheduling term matches all objects with implicit weight 0
                                        (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).
                                      properties:
                                        preference:
                                          description: A node selector term, associated with the corresponding weight.
                                          properties:
                                            matchExpressions:
                                              description: A list of node selector requirements by node's labels.
                                              items:
                                                description: |-
                                                  A node selector requirement is a selector that contains values, a key, and an operator
                                                  that relates the key and values.
                                                properties:
                                                  key:
                                                    description: The label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      Represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      An array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. If the operator is Gt or Lt, the values
                                                      array must have a single element, which will be interpreted as an integer.
                                                      This array is replaced during a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchFields:
                                              description: A list of node selector requirements by node's fields.
                                              items:
                                                description: |-
                                                  A node selector requirement is a selector that contains values, a key, and an operator
                                                  that relates the key and values.
                                                properties:
                                                  key:
                                                    description: The label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      Represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      An array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. If the operator is Gt or Lt, the values
                                                      array must have a single element, which will be interpreted as an integer.
                                                      This array is replaced during a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        weight:
                                          description: Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.
                                          format: int32
                                          type: integer
                                      required:
                                        - preference
                                        - weight
                                      type: object
                                    type: array
                                    x-kubernetes-list-type: atomic
                                  requiredDuringSchedulingIgnoredDuringExecution:
                                    description: |-
                                      If the affinity requirements specified by this field are not met at
                                      scheduling time, the pod will not be scheduled onto the node.
                                      If the affinity requirements specified by this field cease to be met
                                      at some point during pod execution (e.g. due to an update), the system
                                      may or may not try to eventually evict the pod from its node.
                                    properties:
                                      nodeSelectorTerms:
                                        description: Required. A list of node selector terms. The terms are ORed.
                                        items:
                                          description: |-
                                            A null or empty node selector term matches no objects. The requirements of
                                            them are ANDed.
                                            The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.
                                          properties:
                                            matchExpressions:
                                              description: A list of node selector requirements by node's labels.
                                              items:
                                                description: |-
                                                  A node selector requirement is a selector that contains values, a key, and an operator
                                                  that relates the key and values.
                                                properties:
                                                  key:
                                                    description: The label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      Represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      An array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. If the operator is Gt or Lt, the values
                                                      array must have a single element, which will be interpreted as an integer.
                                                      This array is replaced during a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchFields:
                                              description: A list of node selector requirements by node's fields.
                                              items:
                                                description: |-
                                                  A node selector requirement is a selector that contains values, a key, and an operator
                                                  that relates the key and values.
                                                properties:
                                                  key:
                                                    description: The label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      Represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      An array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. If the operator is Gt or Lt, the values
                                                      array must have a single element, which will be interpreted as an integer.
                                                      This array is replaced during a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        type: array
                                        x-kubernetes-list-type: atomic
                                    required:
                                      - nodeSelectorTerms
                                    type: object
                                    x-kubernetes-map-type: atomic
                                type: object
                              podAffinity:
                                description: Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).
                                properties:
                                  preferredDuringSchedulingIgnoredDuringExecution:
                                    description: |-
                                      The scheduler will prefer to schedule pods to nodes that satisfy
                                      the affinity expressions specified by this field, but it may choose
                                      a node that violates one or more of the expressions. The node that is
                                      most preferred is the one with the greatest sum of weights, i.e.
                                      for each node that meets all of the scheduling requirements (resource
                                      request, requiredDuringScheduling affinity expressions, etc.),
                                      compute a sum by iterating through the elements of this field and adding
                                      "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the
                                      node(s) with the highest sum are the most preferred.
                                    items:
                                      description: The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)
                                      properties:
                                        podAffinityTerm:
                                          description: Required. A pod affinity term, associated with the corresponding weight.
                                          properties:
                                            labelSelector:
                                              description: |-
                                                A label query over a set of resources, in this case pods.
                                                If it's null, this PodAffinityTerm matches with no Pods.
                                              properties:
                                                matchExpressions:
                                                  description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                                  items:
                                                    description: |-
                                                      A label selector requirement is a selector that contains values, a key, and an operator that
                                                      relates the key and values.
                                                    properties:
                                                      key:
                                                        description: key is the label key that the selector applies to.
                                                        type: string
                                                      operator:
                                                        description: |-
                                                          operator represents a key's relationship to a set of values.
                                                          Valid operators are In, NotIn, Exists and DoesNotExist.
                                                        type: string
                                                      values:
                                                        description: |-
                                                          values is an array of string values. If the operator is In or NotIn,
                                                          the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                          the values array must be empty. This array is replaced during a strategic
                                                          merge patch.
                                                        items:
                                                          type: string
                                                        type: array
                                                        x-kubernetes-list-type: atomic
                                                    required:
                                                      - key
                                                      - operator
                                                    type: object
                                                  type: array
                                                  x-kubernetes-list-type: atomic
                                                matchLabels:
                                                  additionalProperties:
                                                    type: string
                                                  description: |-
                                                    matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                    map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                    operator is "In", and the values array contains only "value". The requirements are ANDed.
                                                  type: object
                                              type: object
                                              x-kubernetes-map-type: atomic
                                            matchLabelKeys:
                                              description: |-
                                                MatchLabelKeys is a set of pod label keys to select which pods will
                                                be taken into consideration. The keys are used to lookup values from the
                                                incoming pod labels, those key-value labels are merged with `labelSelector` as `key in (value)`
                                                to select the group of existing pods which pods will be taken into consideration
                                                for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                                pod labels will be ignored. The default value is empty.
                                                The same key is forbidden to exist in both matchLabelKeys and labelSelector.
                                                Also, matchLabelKeys cannot be set when labelSelector isn't set.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            mismatchLabelKeys:
                                              description: |-
                                                MismatchLabelKeys is a set of pod label keys to select which pods will
                                                be taken into consideration. The keys are used to lookup values from the
                                                incoming pod labels, those key-value labels are merged with `labelSelector` as `key notin (value)`
                                                to select the group of existing pods which pods will be taken into consideration
                                                for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                                pod labels will be ignored. The default value is empty.
                                                The same key is forbidden to exist in both mismatchLabelKeys and labelSelector.
                                                Also, mismatchLabelKeys cannot be set when labelSelector isn't set.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            namespaceSelector:
                                              description: |-
                                                A label query over the set of namespaces that the term applies to.
                                                The term is applied to the union of the namespaces selected by this field
                                                and the ones listed in the namespaces field.
                                                null selector and null or empty namespaces list means "this pod's namespace".
                                                An empty selector ({}) matches all namespaces.
                                              properties:
                                                matchExpressions:
                                                  description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                                  items:
                                                    description: |-
                                                      A label selector requirement is a selector that contains values, a key, and an operator that
                                                      relates the key and values.
                                                    properties:
                                                      key:
                                                        description: key is the label key that the selector applies to.
                                                        type: string
                                                      operator:
                                                        description: |-
                                                          operator represents a key's relationship to a set of values.
                                                          Valid operators are In, NotIn, Exists and DoesNotExist.
                                                        type: string
                                                      values:
                                                        description: |-
                                                          values is an array of string values. If the operator is In or NotIn,
                                                          the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                          the values array must be empty. This array is replaced during a strategic
                                                          merge patch.
                                                        items:
                                                          type: string
                                                        type: array
                                                        x-kubernetes-list-type: atomic
                                                    required:
                                                      - key
                                                      - operator
                                                    type: object
                                                  type: array
                                                  x-kubernetes-list-type: atomic
                                                matchLabels:
                                                  additionalProperties:
                                                    type: string
                                                  description: |-
                                                    matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                    map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                    operator is "In", and the values array contains only "value". The requirements are ANDed.
                                                  type: object
                                              type: object
                                              x-kubernetes-map-type: atomic
                                            namespaces:
                                              description: |-
                                                namespaces specifies a static list of namespace names that the term applies to.
                                                The term is applied to the union of the namespaces listed in this field
                                                and the ones selected by namespaceSelector.
                                                null or empty namespaces list and null namespaceSelector means "this pod's namespace".
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            topologyKey:
                                              description: |-
                                                This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching
                                                the labelSelector in the specified namespaces, where co-located is defined as running on a node
                                                whose value of the label with key topologyKey matches that of any node on which any of the
                                                selected pods is running.
                                                Empty topologyKey is not allowed.
                                              type: string
                                          required:
                                            - topologyKey
                                          type: object
                                        weight:
                                          description: |-
                                            weight associated with matching the corresponding podAffinityTerm,
                                            in the range 1-100.
                                          format: int32
                                          type: integer
                                      required:
                                        - podAffinityTerm
                                        - weight
                                      type: object
                                    type: array
                                    x-kubernetes-list-type: atomic
                                  requiredDuringSchedulingIgnoredDuringExecution:
                                    description: |-
                                      If the affinity requirements specified by this field are not met at
                                      scheduling time, the pod will not be scheduled onto the node.
                                      If the affinity requirements specified by this field cease to be met
                                      at some point during pod execution (e.g. due to a pod label update), the
                                      system may or may not try to eventually evict the pod from its node.
                                      When there are multiple elements, the lists of nodes corresponding to each
                                      podAffinityTerm are intersected, i.e. all terms must be satisfied.
                                    items:
                                      description: |-
                                        Defines a set of pods (namely those matching the labelSelector
                                        relative to the given namespace(s)) that this pod should be
                                        co-located (affinity) or not co-located (anti-affinity) with,
                                        where co-located is defined as running on a node whose value of
                                        the label with key <topologyKey> matches that of any node on which
                                        a pod of the set of pods is running
                                      properties:
                                        labelSelector:
                                          description: |-
                                            A label query over a set of resources, in this case pods.
                                            If it's null, this PodAffinityTerm matches with no Pods.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                              items:
                                                description: |-
                                                  A label selector requirement is a selector that contains values, a key, and an operator that
                                                  relates the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      operator represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      values is an array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. This array is replaced during a strategic
                                                      merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: |-
                                                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                operator is "In", and the values array contains only "value". The requirements are ANDed.
                                              type: object
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        matchLabelKeys:
                                          description: |-
                                            MatchLabelKeys is a set of pod label keys to select which pods will
                                            be taken into consideration. The keys are used to lookup values from the
                                            incoming pod labels, those key-value labels are merged with `labelSelector` as `key in (value)`
                                            to select the group of existing pods which pods will be taken into consideration
                                            for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                            pod labels will be ignored. The default value is empty.
                                            The same key is forbidden to exist in both matchLabelKeys and labelSelector.
                                            Also, matchLabelKeys cannot be set when labelSelector isn't set.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        mismatchLabelKeys:
                                          description: |-
                                            MismatchLabelKeys is a set of pod label keys to select which pods will
                                            be taken into consideration. The keys are used to lookup values from the
                                            incoming pod labels, those key-value labels are merged with `labelSelector` as `key notin (value)`
                                            to select the group of existing pods which pods will be taken into consideration
                                            for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                            pod labels will be ignored. The default value is empty.
                                            The same key is forbidden to exist in both mismatchLabelKeys and labelSelector.
                                            Also, mismatchLabelKeys cannot be set when labelSelector isn't set.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        namespaceSelector:
                                          description: |-
                                            A label query over the set of namespaces that the term applies to.
                                            The term is applied to the union of the namespaces selected by this field
                                            and the ones listed in the namespaces field.
                                            null selector and null or empty namespaces list means "this pod's namespace".
                                            An empty selector ({}) matches all namespaces.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                              items:
                                                description: |-
                                                  A label selector requirement is a selector that contains values, a key, and an operator that
                                                  relates the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      operator represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      values is an array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. This array is replaced during a strategic
                                                      merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: |-
                                                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                operator is "In", and the values array contains only "value". The requirements are ANDed.
                                              type: object
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        namespaces:
                                          description: |-
                                            namespaces specifies a static list of namespace names that the term applies to.
                                            The term is applied to the union of the namespaces listed in this field
                                            and the ones selected by namespaceSelector.
                                            null or empty namespaces list and null namespaceSelector means "this pod's namespace".
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        topologyKey:
                                          description: |-
                                            This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching
                                            the labelSelector in the specified namespaces, where co-located is defined as running on a node
                                            whose value of the label with key topologyKey matches that of any node on which any of the
                                            selected pods is running.
                                            Empty topologyKey is not allowed.
                                          type: string
                                      required:
                                        - topologyKey
                                      type: object
                                    type: array
                                    x-kubernetes-list-type: atomic
                                type: object
                              podAntiAffinity:
                                description: Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).
                                properties:
                                  preferredDuringSchedulingIgnoredDuringExecution:
                                    description: |-
                                      The scheduler will prefer to schedule pods to nodes that satisfy
                                      the anti-affinity expressions specified by this field, but it may choose
                                      a node that violates one or more of the expressions. The node that is
                                      most preferred is the one with the greatest sum of weights, i.e.
                                      for each node that meets all of the scheduling requirements (resource
                                      request, requiredDuringScheduling anti-affinity expressions, etc.),
                                      compute a sum by iterating through the elements of this field and adding
                                      "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the
                                      node(s) with the highest sum are the most preferred.
                                    items:
                                      description: The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)
                                      properties:
                                        podAffinityTerm:
                                          description: Required. A pod affinity term, associated with the corresponding weight.
                                          properties:
                                            labelSelector:
                                              description: |-
                                                A label query over a set of resources, in this case pods.
                                                If it's null, this PodAffinityTerm matches with no Pods.
                                              properties:
                                                matchExpressions:
                                                  description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                                  items:
                                                    description: |-
                                                      A label selector requirement is a selector that contains values, a key, and an operator that
                                                      relates the key and values.
                                                    properties:
                                                      key:
                                                        description: key is the label key that the selector applies to.
                                                        type: string
                                                      operator:
                                                        description: |-
                                                          operator represents a key's relationship to a set of values.
                                                          Valid operators are In, NotIn, Exists and DoesNotExist.
                                                        type: string
                                                      values:
                                                        description: |-
                                                          values is an array of string values. If the operator is In or NotIn,
                                                          the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                          the values array must be empty. This array is replaced during a strategic
                                                          merge patch.
                                                        items:
                                                          type: string
                                                        type: array
                                                        x-kubernetes-list-type: atomic
                                                    required:
                                                      - key
                                                      - operator
                                                    type: object
                                                  type: array
                                                  x-kubernetes-list-type: atomic
                                                matchLabels:
                                                  additionalProperties:
                                                    type: string
                                                  description: |-
                                                    matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                    map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                    operator is "In", and the values array contains only "value". The requirements are ANDed.
                                                  type: object
                                              type: object
                                              x-kubernetes-map-type: atomic
                                            matchLabelKeys:
                                              description: |-
                                                MatchLabelKeys is a set of pod label keys to select which pods will
                                                be taken into consideration. The keys are used to lookup values from the
                                                incoming pod labels, those key-value labels are merged with `labelSelector` as `key in (value)`
                                                to select the group of existing pods which pods will be taken into consideration
                                                for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                                pod labels will be ignored. The default value is empty.
                                                The same key is forbidden to exist in both matchLabelKeys and labelSelector.
                                                Also, matchLabelKeys cannot be set when labelSelector isn't set.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            mismatchLabelKeys:
                                              description: |-
                                                MismatchLabelKeys is a set of pod label keys to select which pods will
                                                be taken into consideration. The keys are used to lookup values from the
                                                incoming pod labels, those key-value labels are merged with `labelSelector` as `key notin (value)`
                                                to select the group of existing pods which pods will be taken into consideration
                                                for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                                pod labels will be ignored. The default value is empty.
                                                The same key is forbidden to exist in both mismatchLabelKeys and labelSelector.
                                                Also, mismatchLabelKeys cannot be set when labelSelector isn't set.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            namespaceSelector:
                                              description: |-
                                                A label query over the set of namespaces that the term applies to.
                                                The term is applied to the union of the namespaces selected by this field
                                                and the ones listed in the namespaces field.
                                                null selector and null or empty namespaces list means "this pod's namespace".
                                                An empty selector ({}) matches all namespaces.
                                              properties:
                                                matchExpressions:
                                                  description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                                  items:
                                                    description: |-
                                                      A label selector requirement is a selector that contains values, a key, and an operator that
                                                      relates the key and values.
                                                    properties:
                                                      key:
                                                        description: key is the label key that the selector applies to.
                                                        type: string
                                                      operator:
                                                        description: |-
                                                          operator represents a key's relationship to a set of values.
                                                          Valid operators are In, NotIn, Exists and DoesNotExist.
                                                        type: string
                                                      values:
                                                        description: |-
                                                          values is an array of string values. If the operator is In or NotIn,
                                                          the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                          the values array must be empty. This array is replaced during a strategic
                                                          merge patch.
                                                        items:
                                                          type: string
                                                        type: array
                                                        x-kubernetes-list-type: atomic
                                                    required:
                                                      - key
                                                      - operator
                                                    type: object
                                                  type: array
                                                  x-kubernetes-list-type: atomic
                                                matchLabels:
                                                  additionalProperties:
                                                    type: string
                                                  description: |-
                                                    matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                    map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                    operator is "In", and the values array contains only "value". The requirements are ANDed.
                                                  type: object
                                              type: object
                                              x-kubernetes-map-type: atomic
                                            namespaces:
                                              description: |-
                                                namespaces specifies a static list of namespace names that the term applies to.
                                                The term is applied to the union of the namespaces listed in this field
                                                and the ones selected by namespaceSelector.
                                                null or empty namespaces list and null namespaceSelector means "this pod's namespace".
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            topologyKey:
                                              description: |-
                                                This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching
                                                the labelSelector in the specified namespaces, where co-located is defined as running on a node
                                                whose value of the label with key topologyKey matches that of any node on which any of the
                                                selected pods is running.
                                                Empty topologyKey is not allowed.
                                              type: string
                                          required:
                                            - topologyKey
                                          type: object
                                        weight:
                                          description: |-
                                            weight associated with matching the corresponding podAffinityTerm,
                                            in the range 1-100.
                                          format: int32
                                          type: integer
                                      required:
                                        - podAffinityTerm
                                        - weight
                                      type: object
                                    type: array
                                    x-kubernetes-list-type: atomic
                                  requiredDuringSchedulingIgnoredDuringExecution:
                                    description: |-
                                      If the anti-affinity requirements specified by this field are not met at
                                      scheduling time, the pod will not be scheduled onto the node.
                                      If the anti-affinity requirements specified by this field cease to be met
                                      at some point during pod execution (e.g. due to a pod label update), the
                                      system may or may not try to eventually evict the pod from its node.
                                      When there are multiple elements, the lists of nodes corresponding to each
                                      podAffinityTerm are intersected, i.e. all terms must be satisfied.
                                    items:
                                      description: |-
                                        Defines a set of pods (namely those matching the labelSelector
                                        relative to the given namespace(s)) that this pod should be
                                        co-located (affinity) or not co-located (anti-affinity) with,
                                        where co-located is defined as running on a node whose value of
                                        the label with key <topologyKey> matches that of any node on which
                                        a pod of the set of pods is running
                                      properties:
                                        labelSelector:
                                          description: |-
                                            A label query over a set of resources, in this case pods.
                                            If it's null, this PodAffinityTerm matches with no Pods.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                              items:
                                                description: |-
                                                  A label selector requirement is a selector that contains values, a key, and an operator that
                                                  relates the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      operator represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      values is an array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. This array is replaced during a strategic
                                                      merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: |-
                                                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                operator is "In", and the values array contains only "value". The requirements are ANDed.
                                              type: object
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        matchLabelKeys:
                                          description: |-
                                            MatchLabelKeys is a set of pod label keys to select which pods will
                                            be taken into consideration. The keys are used to lookup values from the
                                            incoming pod labels, those key-value labels are merged with `labelSelector` as `key in (value)`
                                            to select the group of existing pods which pods will be taken into consideration
                                            for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                            pod labels will be ignored. The default value is empty.
                                            The same key is forbidden to exist in both matchLabelKeys and labelSelector.
                                            Also, matchLabelKeys cannot be set when labelSelector isn't set.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        mismatchLabelKeys:
                                          description: |-
                                            MismatchLabelKeys is a set of pod label keys to select which pods will
                                            be taken into consideration. The keys are used to lookup values from the
                                            incoming pod labels, those key-value labels are merged with `labelSelector` as `key notin (value)`
                                            to select the group of existing pods which pods will be taken into consideration
                                            for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming
                                            pod labels will be ignored. The default value is empty.
                                            The same key is forbidden to exist in both mismatchLabelKeys and labelSelector.
                                            Also, mismatchLabelKeys cannot be set when labelSelector isn't set.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        namespaceSelector:
                                          description: |-
                                            A label query over the set of namespaces that the term applies to.
                                            The term is applied to the union of the namespaces selected by this field
                                            and the ones listed in the namespaces field.
                                            null selector and null or empty namespaces list means "this pod's namespace".
                                            An empty selector ({}) matches all namespaces.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                              items:
                                                description: |-
                                                  A label selector requirement is a selector that contains values, a key, and an operator that
                                                  relates the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label key that the selector applies to.
                                                    type: string
                                                  operator:
                                                    description: |-
                                                      operator represents a key's relationship to a set of values.
                                                      Valid operators are In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: |-
                                                      values is an array of string values. If the operator is In or NotIn,
                                                      the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                      the values array must be empty. This array is replaced during a strategic
                                                      merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                required:
                                                  - key
                                                  - operator
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: |-
                                                matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                operator is "In", and the values array contains only "value". The requirements are ANDed.
                                              type: object
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        namespaces:
                                          description: |-
                                            namespaces specifies a static list of namespace names that the term applies to.
                                            The term is applied to the union of the namespaces listed in this field
                                            and the ones selected by namespaceSelector.
                                            null or empty namespaces list and null namespaceSelector means "this pod's namespace".
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        topologyKey:
                                          description: |-
                                            This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching
                                            the labelSelector in the specified namespaces, where co-located is defined as running on a node
                                            whose value of the label with key topologyKey matches that of any node on which any of the
                                            selected pods is running.
                                            Empty topologyKey is not allowed.
                                          type: string
                                      required:
                                        - topologyKey
                                      type: object
                                    type: array
                                    x-kubernetes-list-type: atomic
                                type: object
                            type: object
                          automountServiceAccountToken:
                            description: AutomountServiceAccountToken indicates whether a service account token should be automatically mounted.
                            type: boolean
                          containers:
                            description: |-
                              List of containers belonging to the pod.
                              Containers cannot currently be added or removed.
                              There must be at least one container in a Pod.
                              Cannot be updated.
                            items:
                              description: A single application container that you want to run within a pod.
                              properties:
                                args:
                                  description: |-
                                    Arguments to the entrypoint.
                                    The container image's CMD is used if this is not provided.
                                    Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                    cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                    to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                    produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                    of whether the variable exists or not. Cannot be updated.
                                    More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                command:
                                  description: |-
                                    Entrypoint array. Not executed within a shell.
                                    The container image's ENTRYPOINT is used if this is not provided.
                                    Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                    cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                    to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                    produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                    of whether the variable exists or not. Cannot be updated.
                                    More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                env:
                                  description: |-
                                    List of environment variables to set in the container.
                                    Cannot be updated.
                                  items:
                                    description: EnvVar represents an environment variable present in a Container.
                                    properties:
                                      name:
                                        description: Name of the environment variable. Must be a C_IDENTIFIER.
                                        type: string
                                      value:
                                        description: |-
                                          Variable references $(VAR_NAME) are expanded
                                          using the previously defined environment variables in the container and
                                          any service environment variables. If a variable cannot be resolved,
                                          the reference in the input string will be unchanged. Double $$ are reduced
                                          to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e.
                                          "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)".
                                          Escaped references will never be expanded, regardless of whether the variable
                                          exists or not.
                                          Defaults to "".
                                        type: string
                                      valueFrom:
                                        description: Source for the environment variable's value. Cannot be used if value is not empty.
                                        properties:
                                          configMapKeyRef:
                                            description: Selects a key of a ConfigMap.
                                            properties:
                                              key:
                                                description: The key to select.
                                                type: string
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: Specify whether the ConfigMap or its key must be defined
                                                type: boolean
                                            required:
                                              - key
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          fieldRef:
                                            description: |-
                                              Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`,
                                              spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
                                            properties:
                                              apiVersion:
                                                description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                                type: string
                                              fieldPath:
                                                description: Path of the field to select in the specified API version.
                                                type: string
                                            required:
                                              - fieldPath
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          resourceFieldRef:
                                            description: |-
                                              Selects a resource of the container: only resources limits and requests
                                              (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
                                            properties:
                                              containerName:
                                                description: 'Container name: required for volumes, optional for env vars'
                                                type: string
                                              divisor:
                                                anyOf:
                                                  - type: integer
                                                  - type: string
                                                description: Specifies the output format of the exposed resources, defaults to "1"
                                                pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                x-kubernetes-int-or-string: true
                                              resource:
                                                description: 'Required: resource to select'
                                                type: string
                                            required:
                                              - resource
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          secretKeyRef:
                                            description: Selects a key of a secret in the pod's namespace
                                            properties:
                                              key:
                                                description: The key of the secret to select from.  Must be a valid secret key.
                                                type: string
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: Specify whether the Secret or its key must be defined
                                                type: boolean
                                            required:
                                              - key
                                            type: object
                                            x-kubernetes-map-type: atomic
                                        type: object
                                    required:
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - name
                                  x-kubernetes-list-type: map
                                envFrom:
                                  description: |-
                                    List of sources to populate environment variables in the container.
                                    The keys defined within a source must be a C_IDENTIFIER. All invalid keys
                                    will be reported as an event when the container is starting. When a key exists in multiple
                                    sources, the value associated with the last source will take precedence.
                                    Values defined by an Env with a duplicate key will take precedence.
                                    Cannot be updated.
                                  items:
                                    description: EnvFromSource represents the source of a set of ConfigMaps or Secrets
                                    properties:
                                      configMapRef:
                                        description: The ConfigMap to select from
                                        properties:
                                          name:
                                            default: ""
                                            description: |-
                                              Name of the referent.
                                              This field is effectively required, but due to backwards compatibility is
                                              allowed to be empty. Instances of this type with an empty value here are
                                              almost certainly wrong.
                                              More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                            type: string
                                          optional:
                                            description: Specify whether the ConfigMap must be defined
                                            type: boolean
                                        type: object
                                        x-kubernetes-map-type: atomic
                                      prefix:
                                        description: Optional text to prepend to the name of each environment variable. Must be a C_IDENTIFIER.
                                        type: string
                                      secretRef:
                                        description: The Secret to select from
                                        properties:
                                          name:
                                            default: ""
                                            description: |-
                                              Name of the referent.
                                              This field is effectively required, but due to backwards compatibility is
                                              allowed to be empty. Instances of this type with an empty value here are
                                              almost certainly wrong.
                                              More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                            type: string
                                          optional:
                                            description: Specify whether the Secret must be defined
                                            type: boolean
                                        type: object
                                        x-kubernetes-map-type: atomic
                                    type: object
                                  type: array
                                  x-kubernetes-list-type: atomic
                                image:
                                  description: |-
                                    Container image name.
                                    More info: https://kubernetes.io/docs/concepts/containers/images
                                    This field is optional to allow higher level config management to default or override
                                    container images in workload controllers like Deployments and StatefulSets.
                                  type: string
                                imagePullPolicy:
                                  description: |-
                                    Image pull policy.
                                    One of Always, Never, IfNotPresent.
                                    Defaults to Always if :latest tag is specified, or IfNotPresent otherwise.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
                                  type: string
                                lifecycle:
                                  description: |-
                                    Actions that the management system should take in response to container lifecycle events.
                                    Cannot be updated.
                                  properties:
                                    postStart:
                                      description: |-
                                        PostStart is called immediately after a container is created. If the handler fails,
                                        the container is terminated and restarted according to its restart policy.
                                        Other management of the container blocks until the hook completes.
                                        More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                      properties:
                                        exec:
                                          description: Exec specifies a command to execute in the container.
                                          properties:
                                            command:
                                              description: |-
                                                Command is the command line to execute inside the container, the working directory for the
                                                command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                                not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                                a shell, you need to explicitly call out to that shell.
                                                Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                        httpGet:
                                          description: HTTPGet specifies an HTTP GET request to perform.
                                          properties:
                                            host:
                                              description: |-
                                                Host name to connect to, defaults to the pod IP. You probably want to set
                                                "Host" in httpHeaders instead.
                                              type: string
                                            httpHeaders:
                                              description: Custom headers to set in the request. HTTP allows repeated headers.
                                              items:
                                                description: HTTPHeader describes a custom header to be used in HTTP probes
                                                properties:
                                                  name:
                                                    description: |-
                                                      The header field name.
                                                      This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                    type: string
                                                  value:
                                                    description: The header field value
                                                    type: string
                                                required:
                                                  - name
                                                  - value
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            path:
                                              description: Path to access on the HTTP server.
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Name or number of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                            scheme:
                                              description: |-
                                                Scheme to use for connecting to the host.
                                                Defaults to HTTP.
                                              type: string
                                          required:
                                            - port
                                          type: object
                                        sleep:
                                          description: Sleep represents a duration that the container should sleep.
                                          properties:
                                            seconds:
                                              description: Seconds is the number of seconds to sleep.
                                              format: int64
                                              type: integer
                                          required:
                                            - seconds
                                          type: object
                                        tcpSocket:
                                          description: |-
                                            Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                            for backward compatibility. There is no validation of this field and
                                            lifecycle hooks will fail at runtime when it is specified.
                                          properties:
                                            host:
                                              description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Number or name of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                          required:
                                            - port
                                          type: object
                                      type: object
                                    preStop:
                                      description: |-
                                        PreStop is called immediately before a container is terminated due to an
                                        API request or management event such as liveness/startup probe failure,
                                        preemption, resource contention, etc. The handler is not called if the
                                        container crashes or exits. The Pod's termination grace period countdown begins before the
                                        PreStop hook is executed. Regardless of the outcome of the handler, the
                                        container will eventually terminate within the Pod's termination grace
                                        period (unless delayed by finalizers). Other management of the container blocks until the hook completes
                                        or until the termination grace period is reached.
                                        More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                      properties:
                                        exec:
                                          description: Exec specifies a command to execute in the container.
                                          properties:
                                            command:
                                              description: |-
                                                Command is the command line to execute inside the container, the working directory for the
                                                command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                                not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                                a shell, you need to explicitly call out to that shell.
                                                Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                        httpGet:
                                          description: HTTPGet specifies an HTTP GET request to perform.
                                          properties:
                                            host:
                                              description: |-
                                                Host name to connect to, defaults to the pod IP. You probably want to set
                                                "Host" in httpHeaders instead.
                                              type: string
                                            httpHeaders:
                                              description: Custom headers to set in the request. HTTP allows repeated headers.
                                              items:
                                                description: HTTPHeader describes a custom header to be used in HTTP probes
                                                properties:
                                                  name:
                                                    description: |-
                                                      The header field name.
                                                      This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                    type: string
                                                  value:
                                                    description: The header field value
                                                    type: string
                                                required:
                                                  - name
                                                  - value
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            path:
                                              description: Path to access on the HTTP server.
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Name or number of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                            scheme:
                                              description: |-
                                                Scheme to use for connecting to the host.
                                                Defaults to HTTP.
                                              type: string
                                          required:
                                            - port
                                          type: object
                                        sleep:
                                          description: Sleep represents a duration that the container should sleep.
                                          properties:
                                            seconds:
                                              description: Seconds is the number of seconds to sleep.
                                              format: int64
                                              type: integer
                                          required:
                                            - seconds
                                          type: object
                                        tcpSocket:
                                          description: |-
                                            Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                            for backward compatibility. There is no validation of this field and
                                            lifecycle hooks will fail at runtime when it is specified.
                                          properties:
                                            host:
                                              description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Number or name of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                          required:
                                            - port
                                          type: object
                                      type: object
                                    stopSignal:
                                      description: |-
                                        StopSignal defines which signal will be sent to a container when it is being stopped.
                                        If not specified, the default is defined by the container runtime in use.
                                        StopSignal can only be set for Pods with a non-empty .spec.os.name
                                      type: string
                                  type: object
                                livenessProbe:
                                  description: |-
                                    Periodic probe of container liveness.
                                    Container will be restarted if the probe fails.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                name:
                                  description: |-
                                    Name of the container specified as a DNS_LABEL.
                                    Each container in a pod must have a unique name (DNS_LABEL).
                                    Cannot be updated.
                                  type: string
                                ports:
                                  description: |-
                                    List of ports to expose from the container. Not specifying a port here
                                    DOES NOT prevent that port from being exposed. Any port which is
                                    listening on the default "0.0.0.0" address inside a container will be
                                    accessible from the network.
                                    Modifying this array with strategic merge patch may corrupt the data.
                                    For more information See https://github.com/kubernetes/kubernetes/issues/108255.
                                    Cannot be updated.
                                  items:
                                    description: ContainerPort represents a network port in a single container.
                                    properties:
                                      containerPort:
                                        description: |-
                                          Number of port to expose on the pod's IP address.
                                          This must be a valid port number, 0 < x < 65536.
                                        format: int32
                                        type: integer
                                      hostIP:
                                        description: What host IP to bind the external port to.
                                        type: string
                                      hostPort:
                                        description: |-
                                          Number of port to expose on the host.
                                          If specified, this must be a valid port number, 0 < x < 65536.
                                          If HostNetwork is specified, this must match ContainerPort.
                                          Most containers do not need this.
                                        format: int32
                                        type: integer
                                      name:
                                        description: |-
                                          If specified, this must be an IANA_SVC_NAME and unique within the pod. Each
                                          named port in a pod must have a unique name. Name for the port that can be
                                          referred to by services.
                                        type: string
                                      protocol:
                                        default: TCP
                                        description: |-
                                          Protocol for port. Must be UDP, TCP, or SCTP.
                                          Defaults to "TCP".
                                        type: string
                                    required:
                                      - containerPort
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - containerPort
                                    - protocol
                                  x-kubernetes-list-type: map
                                readinessProbe:
                                  description: |-
                                    Periodic probe of container service readiness.
                                    Container will be removed from service endpoints if the probe fails.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                resizePolicy:
                                  description: Resources resize policy for the container.
                                  items:
                                    description: ContainerResizePolicy represents resource resize policy for the container.
                                    properties:
                                      resourceName:
                                        description: |-
                                          Name of the resource to which this resource resize policy applies.
                                          Supported values: cpu, memory.
                                        type: string
                                      restartPolicy:
                                        description: |-
                                          Restart policy to apply when specified resource is resized.
                                          If not specified, it defaults to NotRequired.
                                        type: string
                                    required:
                                      - resourceName
                                      - restartPolicy
                                    type: object
                                  type: array
                                  x-kubernetes-list-type: atomic
                                resources:
                                  description: |-
                                    Compute Resources required by this container.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                  properties:
                                    claims:
                                      description: |-
                                        Claims lists the names of resources, defined in spec.resourceClaims,
                                        that are used by this container.

                                        This is an alpha field and requires enabling the
                                        DynamicResourceAllocation feature gate.

                                        This field is immutable. It can only be set for containers.
                                      items:
                                        description: ResourceClaim references one entry in PodSpec.ResourceClaims.
                                        properties:
                                          name:
                                            description: |-
                                              Name must match the name of one entry in pod.spec.resourceClaims of
                                              the Pod where this field is used. It makes that resource available
                                              inside a container.
                                            type: string
                                          request:
                                            description: |-
                                              Request is the name chosen for a request in the referenced claim.
                                              If empty, everything from the claim is made available, otherwise
                                              only the result of this request.
                                            type: string
                                        required:
                                          - name
                                        type: object
                                      type: array
                                      x-kubernetes-list-map-keys:
                                        - name
                                      x-kubernetes-list-type: map
                                    limits:
                                      additionalProperties:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                        x-kubernetes-int-or-string: true
                                      description: |-
                                        Limits describes the maximum amount of compute resources allowed.
                                        More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                      type: object
                                    requests:
                                      additionalProperties:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                        x-kubernetes-int-or-string: true
                                      description: |-
                                        Requests describes the minimum amount of compute resources required.
                                        If Requests is omitted for a container, it defaults to Limits if that is explicitly specified,
                                        otherwise to an implementation-defined value. Requests cannot exceed Limits.
                                        More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                      type: object
                                  type: object
                                restartPolicy:
                                  description: |-
                                    RestartPolicy defines the restart behavior of individual containers in a pod.
                                    This field may only be set for init containers, and the only allowed value is "Always".
                                    For non-init containers or when this field is not specified,
                                    the restart behavior is defined by the Pod's restart policy and the container type.
                                    Setting the RestartPolicy as "Always" for the init container will have the following effect:
                                    this init container will be continually restarted on
                                    exit until all regular containers have terminated. Once all regular
                                    containers have completed, all init containers with restartPolicy "Always"
                                    will be shut down. This lifecycle differs from normal init containers and
                                    is often referred to as a "sidecar" container. Although this init
                                    container still starts in the init container sequence, it does not wait
                                    for the container to complete before proceeding to the next init
                                    container. Instead, the next init container starts immediately after this
                                    init container is started, or after any startupProbe has successfully
                                    completed.
                                  type: string
                                securityContext:
                                  description: |-
                                    SecurityContext defines the security options the container should be run with.
                                    If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext.
                                    More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
                                  properties:
                                    allowPrivilegeEscalation:
                                      description: |-
                                        AllowPrivilegeEscalation controls whether a process can gain more
                                        privileges than its parent process. This bool directly controls if
                                        the no_new_privs flag will be set on the container process.
                                        AllowPrivilegeEscalation is true always when the container is:
                                        1) run as Privileged
                                        2) has CAP_SYS_ADMIN
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    appArmorProfile:
                                      description: |-
                                        appArmorProfile is the AppArmor options to use by this container. If set, this profile
                                        overrides the pod's appArmorProfile.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        localhostProfile:
                                          description: |-
                                            localhostProfile indicates a profile loaded on the node that should be used.
                                            The profile must be preconfigured on the node to work.
                                            Must match the loaded name of the profile.
                                            Must be set if and only if type is "Localhost".
                                          type: string
                                        type:
                                          description: |-
                                            type indicates which kind of AppArmor profile will be applied.
                                            Valid options are:
                                              Localhost - a profile pre-loaded on the node.
                                              RuntimeDefault - the container runtime's default profile.
                                              Unconfined - no AppArmor enforcement.
                                          type: string
                                      required:
                                        - type
                                      type: object
                                    capabilities:
                                      description: |-
                                        The capabilities to add/drop when running containers.
                                        Defaults to the default set of capabilities granted by the container runtime.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        add:
                                          description: Added capabilities
                                          items:
                                            description: Capability represent POSIX capabilities type
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        drop:
                                          description: Removed capabilities
                                          items:
                                            description: Capability represent POSIX capabilities type
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    privileged:
                                      description: |-
                                        Run container in privileged mode.
                                        Processes in privileged containers are essentially equivalent to root on the host.
                                        Defaults to false.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    procMount:
                                      description: |-
                                        procMount denotes the type of proc mount to use for the containers.
                                        The default value is Default which uses the container runtime defaults for
                                        readonly paths and masked paths.
                                        This requires the ProcMountType feature flag to be enabled.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: string
                                    readOnlyRootFilesystem:
                                      description: |-
                                        Whether this container has a read-only root filesystem.
                                        Default is false.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    runAsGroup:
                                      description: |-
                                        The GID to run the entrypoint of the container process.
                                        Uses runtime default if unset.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      format: int64
                                      type: integer
                                    runAsNonRoot:
                                      description: |-
                                        Indicates that the container must run as a non-root user.
                                        If true, the Kubelet will validate the image at runtime to ensure that it
                                        does not run as UID 0 (root) and fail to start the container if it does.
                                        If unset or false, no such validation will be performed.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                      type: boolean
                                    runAsUser:
                                      description: |-
                                        The UID to run the entrypoint of the container process.
                                        Defaults to user specified in image metadata if unspecified.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      format: int64
                                      type: integer
                                    seLinuxOptions:
                                      description: |-
                                        The SELinux context to be applied to the container.
                                        If unspecified, the container runtime will allocate a random SELinux context for each
                                        container.  May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        level:
                                          description: Level is SELinux level label that applies to the container.
                                          type: string
                                        role:
                                          description: Role is a SELinux role label that applies to the container.
                                          type: string
                                        type:
                                          description: Type is a SELinux type label that applies to the container.
                                          type: string
                                        user:
                                          description: User is a SELinux user label that applies to the container.
                                          type: string
                                      type: object
                                    seccompProfile:
                                      description: |-
                                        The seccomp options to use by this container. If seccomp options are
                                        provided at both the pod & container level, the container options
                                        override the pod options.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        localhostProfile:
                                          description: |-
                                            localhostProfile indicates a profile defined in a file on the node should be used.
                                            The profile must be preconfigured on the node to work.
                                            Must be a descending path, relative to the kubelet's configured seccomp profile location.
                                            Must be set if type is "Localhost". Must NOT be set for any other type.
                                          type: string
                                        type:
                                          description: |-
                                            type indicates which kind of seccomp profile will be applied.
                                            Valid options are:

                                            Localhost - a profile defined in a file on the node should be used.
                                            RuntimeDefault - the container runtime default profile should be used.
                                            Unconfined - no profile should be applied.
                                          type: string
                                      required:
                                        - type
                                      type: object
                                    windowsOptions:
                                      description: |-
                                        The Windows specific settings applied to all containers.
                                        If unspecified, the options from the PodSecurityContext will be used.
                                        If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is linux.
                                      properties:
                                        gmsaCredentialSpec:
                                          description: |-
                                            GMSACredentialSpec is where the GMSA admission webhook
                                            (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the
                                            GMSA credential spec named by the GMSACredentialSpecName field.
                                          type: string
                                        gmsaCredentialSpecName:
                                          description: GMSACredentialSpecName is the name of the GMSA credential spec to use.
                                          type: string
                                        hostProcess:
                                          description: |-
                                            HostProcess determines if a container should be run as a 'Host Process' container.
                                            All of a Pod's containers must have the same effective HostProcess value
                                            (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers).
                                            In addition, if HostProcess is true then HostNetwork must also be set to true.
                                          type: boolean
                                        runAsUserName:
                                          description: |-
                                            The UserName in Windows to run the entrypoint of the container process.
                                            Defaults to the user specified in image metadata if unspecified.
                                            May also be set in PodSecurityContext. If set in both SecurityContext and
                                            PodSecurityContext, the value specified in SecurityContext takes precedence.
                                          type: string
                                      type: object
                                  type: object
                                startupProbe:
                                  description: |-
                                    StartupProbe indicates that the Pod has successfully initialized.
                                    If specified, no other probes are executed until this completes successfully.
                                    If this probe fails, the Pod will be restarted, just as if the livenessProbe failed.
                                    This can be used to provide different probe parameters at the beginning of a Pod's lifecycle,
                                    when it might take a long time to load data or warm a cache, than during steady-state operation.
                                    This cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                stdin:
                                  description: |-
                                    Whether this container should allocate a buffer for stdin in the container runtime. If this
                                    is not set, reads from stdin in the container will always result in EOF.
                                    Default is false.
                                  type: boolean
                                stdinOnce:
                                  description: |-
                                    Whether the container runtime should close the stdin channel after it has been opened by
                                    a single attach. When stdin is true the stdin stream will remain open across multiple attach
                                    sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the
                                    first client attaches to stdin, and then remains open and accepts data until the client disconnects,
                                    at which time stdin is closed and remains closed until the container is restarted. If this
                                    flag is false, a container processes that reads from stdin will never receive an EOF.
                                    Default is false
                                  type: boolean
                                terminationMessagePath:
                                  description: |-
                                    Optional: Path at which the file to which the container's termination message
                                    will be written is mounted into the container's filesystem.
                                    Message written is intended to be brief final status, such as an assertion failure message.
                                    Will be truncated by the node if greater than 4096 bytes. The total message length across
                                    all containers will be limited to 12kb.
                                    Defaults to /dev/termination-log.
                                    Cannot be updated.
                                  type: string
                                terminationMessagePolicy:
                                  description: |-
                                    Indicate how the termination message should be populated. File will use the contents of
                                    terminationMessagePath to populate the container status message on both success and failure.
                                    FallbackToLogsOnError will use the last chunk of container log output if the termination
                                    message file is empty and the container exited with an error.
                                    The log output is limited to 2048 bytes or 80 lines, whichever is smaller.
                                    Defaults to File.
                                    Cannot be updated.
                                  type: string
                                tty:
                                  description: |-
                                    Whether this container should allocate a TTY for itself, also requires 'stdin' to be true.
                                    Default is false.
                                  type: boolean
                                volumeDevices:
                                  description: volumeDevices is the list of block devices to be used by the container.
                                  items:
                                    description: volumeDevice describes a mapping of a raw block device within a container.
                                    properties:
                                      devicePath:
                                        description: devicePath is the path inside of the container that the device will be mapped to.
                                        type: string
                                      name:
                                        description: name must match the name of a persistentVolumeClaim in the pod
                                        type: string
                                    required:
                                      - devicePath
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - devicePath
                                  x-kubernetes-list-type: map
                                volumeMounts:
                                  description: |-
                                    Pod volumes to mount into the container's filesystem.
                                    Cannot be updated.
                                  items:
                                    description: VolumeMount describes a mounting of a Volume within a container.
                                    properties:
                                      mountPath:
                                        description: |-
                                          Path within the container at which the volume should be mounted.  Must
                                          not contain ':'.
                                        type: string
                                      mountPropagation:
                                        description: |-
                                          mountPropagation determines how mounts are propagated from the host
                                          to container and the other way around.
                                          When not set, MountPropagationNone is used.
                                          This field is beta in 1.10.
                                          When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified
                                          (which defaults to None).
                                        type: string
                                      name:
                                        description: This must match the Name of a Volume.
                                        type: string
                                      readOnly:
                                        description: |-
                                          Mounted read-only if true, read-write otherwise (false or unspecified).
                                          Defaults to false.
                                        type: boolean
                                      recursiveReadOnly:
                                        description: |-
                                          RecursiveReadOnly specifies whether read-only mounts should be handled
                                          recursively.

                                          If ReadOnly is false, this field has no meaning and must be unspecified.

                                          If ReadOnly is true, and this field is set to Disabled, the mount is not made
                                          recursively read-only.  If this field is set to IfPossible, the mount is made
                                          recursively read-only, if it is supported by the container runtime.  If this
                                          field is set to Enabled, the mount is made recursively read-only if it is
                                          supported by the container runtime, otherwise the pod will not be started and
                                          an error will be generated to indicate the reason.

                                          If this field is set to IfPossible or Enabled, MountPropagation must be set to
                                          None (or be unspecified, which defaults to None).

                                          If this field is not specified, it is treated as an equivalent of Disabled.
                                        type: string
                                      subPath:
                                        description: |-
                                          Path within the volume from which the container's volume should be mounted.
                                          Defaults to "" (volume's root).
                                        type: string
                                      subPathExpr:
                                        description: |-
                                          Expanded path within the volume from which the container's volume should be mounted.
                                          Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment.
                                          Defaults to "" (volume's root).
                                          SubPathExpr and SubPath are mutually exclusive.
                                        type: string
                                    required:
                                      - mountPath
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - mountPath
                                  x-kubernetes-list-type: map
                                workingDir:
                                  description: |-
                                    Container's working directory.
                                    If not specified, the container runtime's default will be used, which
                                    might be configured in the container image.
                                    Cannot be updated.
                                  type: string
                              required:
                                - name
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - name
                            x-kubernetes-list-type: map
                          dnsConfig:
                            description: |-
                              Specifies the DNS parameters of a pod.
                              Parameters specified here will be merged to the generated DNS
                              configuration based on DNSPolicy.
                            properties:
                              nameservers:
                                description: |-
                                  A list of DNS name server IP addresses.
                                  This will be appended to the base nameservers generated from DNSPolicy.
                                  Duplicated nameservers will be removed.
                                items:
                                  type: string
                                type: array
                                x-kubernetes-list-type: atomic
                              options:
                                description: |-
                                  A list of DNS resolver options.
                                  This will be merged with the base options generated from DNSPolicy.
                                  Duplicated entries will be removed. Resolution options given in Options
                                  will override those that appear in the base DNSPolicy.
                                items:
                                  description: PodDNSConfigOption defines DNS resolver options of a pod.
                                  properties:
                                    name:
                                      description: |-
                                        Name is this DNS resolver option's name.
                                        Required.
                                      type: string
                                    value:
                                      description: Value is this DNS resolver option's value.
                                      type: string
                                  type: object
                                type: array
                                x-kubernetes-list-type: atomic
                              searches:
                                description: |-
                                  A list of DNS search domains for host-name lookup.
                                  This will be appended to the base search paths generated from DNSPolicy.
                                  Duplicated search paths will be removed.
                                items:
                                  type: string
                                type: array
                                x-kubernetes-list-type: atomic
                            type: object
                          dnsPolicy:
                            description: |-
                              Set DNS policy for the pod.
                              Defaults to "ClusterFirst".
                              Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'.
                              DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy.
                              To have DNS options set along with hostNetwork, you have to specify DNS policy
                              explicitly to 'ClusterFirstWithHostNet'.
                            type: string
                          enableServiceLinks:
                            description: |-
                              EnableServiceLinks indicates whether information about services should be injected into pod's
                              environment variables, matching the syntax of Docker links.
                              Optional: Defaults to true.
                            type: boolean
                          ephemeralContainers:
                            description: |-
                              List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing
                              pod to perform user-initiated actions such as debugging. This list cannot be specified when
                              creating a pod, and it cannot be modified by updating the pod spec. In order to add an
                              ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource.
                            items:
                              description: |-
                                An EphemeralContainer is a temporary container that you may add to an existing Pod for
                                user-initiated activities such as debugging. Ephemeral containers have no resource or
                                scheduling guarantees, and they will not be restarted when they exit or when a Pod is
                                removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the
                                Pod to exceed its resource allocation.

                                To add an ephemeral container, use the ephemeralcontainers subresource of an existing
                                Pod. Ephemeral containers may not be removed or restarted.
                              properties:
                                args:
                                  description: |-
                                    Arguments to the entrypoint.
                                    The image's CMD is used if this is not provided.
                                    Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                    cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                    to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                    produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                    of whether the variable exists or not. Cannot be updated.
                                    More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                command:
                                  description: |-
                                    Entrypoint array. Not executed within a shell.
                                    The image's ENTRYPOINT is used if this is not provided.
                                    Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                    cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                    to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                    produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                    of whether the variable exists or not. Cannot be updated.
                                    More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                env:
                                  description: |-
                                    List of environment variables to set in the container.
                                    Cannot be updated.
                                  items:
                                    description: EnvVar represents an environment variable present in a Container.
                                    properties:
                                      name:
                                        description: Name of the environment variable. Must be a C_IDENTIFIER.
                                        type: string
                                      value:
                                        description: |-
                                          Variable references $(VAR_NAME) are expanded
                                          using the previously defined environment variables in the container and
                                          any service environment variables. If a variable cannot be resolved,
                                          the reference in the input string will be unchanged. Double $$ are reduced
                                          to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e.
                                          "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)".
                                          Escaped references will never be expanded, regardless of whether the variable
                                          exists or not.
                                          Defaults to "".
                                        type: string
                                      valueFrom:
                                        description: Source for the environment variable's value. Cannot be used if value is not empty.
                                        properties:
                                          configMapKeyRef:
                                            description: Selects a key of a ConfigMap.
                                            properties:
                                              key:
                                                description: The key to select.
                                                type: string
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: Specify whether the ConfigMap or its key must be defined
                                                type: boolean
                                            required:
                                              - key
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          fieldRef:
                                            description: |-
                                              Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`,
                                              spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
                                            properties:
                                              apiVersion:
                                                description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                                type: string
                                              fieldPath:
                                                description: Path of the field to select in the specified API version.
                                                type: string
                                            required:
                                              - fieldPath
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          resourceFieldRef:
                                            description: |-
                                              Selects a resource of the container: only resources limits and requests
                                              (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
                                            properties:
                                              containerName:
                                                description: 'Container name: required for volumes, optional for env vars'
                                                type: string
                                              divisor:
                                                anyOf:
                                                  - type: integer
                                                  - type: string
                                                description: Specifies the output format of the exposed resources, defaults to "1"
                                                pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                x-kubernetes-int-or-string: true
                                              resource:
                                                description: 'Required: resource to select'
                                                type: string
                                            required:
                                              - resource
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          secretKeyRef:
                                            description: Selects a key of a secret in the pod's namespace
                                            properties:
                                              key:
                                                description: The key of the secret to select from.  Must be a valid secret key.
                                                type: string
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: Specify whether the Secret or its key must be defined
                                                type: boolean
                                            required:
                                              - key
                                            type: object
                                            x-kubernetes-map-type: atomic
                                        type: object
                                    required:
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - name
                                  x-kubernetes-list-type: map
                                envFrom:
                                  description: |-
                                    List of sources to populate environment variables in the container.
                                    The keys defined within a source must be a C_IDENTIFIER. All invalid keys
                                    will be reported as an event when the container is starting. When a key exists in multiple
                                    sources, the value associated with the last source will take precedence.
                                    Values defined by an Env with a duplicate key will take precedence.
                                    Cannot be updated.
                                  items:
                                    description: EnvFromSource represents the source of a set of ConfigMaps or Secrets
                                    properties:
                                      configMapRef:
                                        description: The ConfigMap to select from
                                        properties:
                                          name:
                                            default: ""
                                            description: |-
                                              Name of the referent.
                                              This field is effectively required, but due to backwards compatibility is
                                              allowed to be empty. Instances of this type with an empty value here are
                                              almost certainly wrong.
                                              More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                            type: string
                                          optional:
                                            description: Specify whether the ConfigMap must be defined
                                            type: boolean
                                        type: object
                                        x-kubernetes-map-type: atomic
                                      prefix:
                                        description: Optional text to prepend to the name of each environment variable. Must be a C_IDENTIFIER.
                                        type: string
                                      secretRef:
                                        description: The Secret to select from
                                        properties:
                                          name:
                                            default: ""
                                            description: |-
                                              Name of the referent.
                                              This field is effectively required, but due to backwards compatibility is
                                              allowed to be empty. Instances of this type with an empty value here are
                                              almost certainly wrong.
                                              More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                            type: string
                                          optional:
                                            description: Specify whether the Secret must be defined
                                            type: boolean
                                        type: object
                                        x-kubernetes-map-type: atomic
                                    type: object
                                  type: array
                                  x-kubernetes-list-type: atomic
                                image:
                                  description: |-
                                    Container image name.
                                    More info: https://kubernetes.io/docs/concepts/containers/images
                                  type: string
                                imagePullPolicy:
                                  description: |-
                                    Image pull policy.
                                    One of Always, Never, IfNotPresent.
                                    Defaults to Always if :latest tag is specified, or IfNotPresent otherwise.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
                                  type: string
                                lifecycle:
                                  description: Lifecycle is not allowed for ephemeral containers.
                                  properties:
                                    postStart:
                                      description: |-
                                        PostStart is called immediately after a container is created. If the handler fails,
                                        the container is terminated and restarted according to its restart policy.
                                        Other management of the container blocks until the hook completes.
                                        More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                      properties:
                                        exec:
                                          description: Exec specifies a command to execute in the container.
                                          properties:
                                            command:
                                              description: |-
                                                Command is the command line to execute inside the container, the working directory for the
                                                command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                                not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                                a shell, you need to explicitly call out to that shell.
                                                Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                        httpGet:
                                          description: HTTPGet specifies an HTTP GET request to perform.
                                          properties:
                                            host:
                                              description: |-
                                                Host name to connect to, defaults to the pod IP. You probably want to set
                                                "Host" in httpHeaders instead.
                                              type: string
                                            httpHeaders:
                                              description: Custom headers to set in the request. HTTP allows repeated headers.
                                              items:
                                                description: HTTPHeader describes a custom header to be used in HTTP probes
                                                properties:
                                                  name:
                                                    description: |-
                                                      The header field name.
                                                      This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                    type: string
                                                  value:
                                                    description: The header field value
                                                    type: string
                                                required:
                                                  - name
                                                  - value
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            path:
                                              description: Path to access on the HTTP server.
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Name or number of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                            scheme:
                                              description: |-
                                                Scheme to use for connecting to the host.
                                                Defaults to HTTP.
                                              type: string
                                          required:
                                            - port
                                          type: object
                                        sleep:
                                          description: Sleep represents a duration that the container should sleep.
                                          properties:
                                            seconds:
                                              description: Seconds is the number of seconds to sleep.
                                              format: int64
                                              type: integer
                                          required:
                                            - seconds
                                          type: object
                                        tcpSocket:
                                          description: |-
                                            Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                            for backward compatibility. There is no validation of this field and
                                            lifecycle hooks will fail at runtime when it is specified.
                                          properties:
                                            host:
                                              description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Number or name of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                          required:
                                            - port
                                          type: object
                                      type: object
                                    preStop:
                                      description: |-
                                        PreStop is called immediately before a container is terminated due to an
                                        API request or management event such as liveness/startup probe failure,
                                        preemption, resource contention, etc. The handler is not called if the
                                        container crashes or exits. The Pod's termination grace period countdown begins before the
                                        PreStop hook is executed. Regardless of the outcome of the handler, the
                                        container will eventually terminate within the Pod's termination grace
                                        period (unless delayed by finalizers). Other management of the container blocks until the hook completes
                                        or until the termination grace period is reached.
                                        More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                      properties:
                                        exec:
                                          description: Exec specifies a command to execute in the container.
                                          properties:
                                            command:
                                              description: |-
                                                Command is the command line to execute inside the container, the working directory for the
                                                command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                                not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                                a shell, you need to explicitly call out to that shell.
                                                Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                        httpGet:
                                          description: HTTPGet specifies an HTTP GET request to perform.
                                          properties:
                                            host:
                                              description: |-
                                                Host name to connect to, defaults to the pod IP. You probably want to set
                                                "Host" in httpHeaders instead.
                                              type: string
                                            httpHeaders:
                                              description: Custom headers to set in the request. HTTP allows repeated headers.
                                              items:
                                                description: HTTPHeader describes a custom header to be used in HTTP probes
                                                properties:
                                                  name:
                                                    description: |-
                                                      The header field name.
                                                      This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                    type: string
                                                  value:
                                                    description: The header field value
                                                    type: string
                                                required:
                                                  - name
                                                  - value
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            path:
                                              description: Path to access on the HTTP server.
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Name or number of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                            scheme:
                                              description: |-
                                                Scheme to use for connecting to the host.
                                                Defaults to HTTP.
                                              type: string
                                          required:
                                            - port
                                          type: object
                                        sleep:
                                          description: Sleep represents a duration that the container should sleep.
                                          properties:
                                            seconds:
                                              description: Seconds is the number of seconds to sleep.
                                              format: int64
                                              type: integer
                                          required:
                                            - seconds
                                          type: object
                                        tcpSocket:
                                          description: |-
                                            Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                            for backward compatibility. There is no validation of this field and
                                            lifecycle hooks will fail at runtime when it is specified.
                                          properties:
                                            host:
                                              description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Number or name of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                          required:
                                            - port
                                          type: object
                                      type: object
                                    stopSignal:
                                      description: |-
                                        StopSignal defines which signal will be sent to a container when it is being stopped.
                                        If not specified, the default is defined by the container runtime in use.
                                        StopSignal can only be set for Pods with a non-empty .spec.os.name
                                      type: string
                                  type: object
                                livenessProbe:
                                  description: Probes are not allowed for ephemeral containers.
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                name:
                                  description: |-
                                    Name of the ephemeral container specified as a DNS_LABEL.
                                    This name must be unique among all containers, init containers and ephemeral containers.
                                  type: string
                                ports:
                                  description: Ports are not allowed for ephemeral containers.
                                  items:
                                    description: ContainerPort represents a network port in a single container.
                                    properties:
                                      containerPort:
                                        description: |-
                                          Number of port to expose on the pod's IP address.
                                          This must be a valid port number, 0 < x < 65536.
                                        format: int32
                                        type: integer
                                      hostIP:
                                        description: What host IP to bind the external port to.
                                        type: string
                                      hostPort:
                                        description: |-
                                          Number of port to expose on the host.
                                          If specified, this must be a valid port number, 0 < x < 65536.
                                          If HostNetwork is specified, this must match ContainerPort.
                                          Most containers do not need this.
                                        format: int32
                                        type: integer
                                      name:
                                        description: |-
                                          If specified, this must be an IANA_SVC_NAME and unique within the pod. Each
                                          named port in a pod must have a unique name. Name for the port that can be
                                          referred to by services.
                                        type: string
                                      protocol:
                                        default: TCP
                                        description: |-
                                          Protocol for port. Must be UDP, TCP, or SCTP.
                                          Defaults to "TCP".
                                        type: string
                                    required:
                                      - containerPort
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - containerPort
                                    - protocol
                                  x-kubernetes-list-type: map
                                readinessProbe:
                                  description: Probes are not allowed for ephemeral containers.
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                resizePolicy:
                                  description: Resources resize policy for the container.
                                  items:
                                    description: ContainerResizePolicy represents resource resize policy for the container.
                                    properties:
                                      resourceName:
                                        description: |-
                                          Name of the resource to which this resource resize policy applies.
                                          Supported values: cpu, memory.
                                        type: string
                                      restartPolicy:
                                        description: |-
                                          Restart policy to apply when specified resource is resized.
                                          If not specified, it defaults to NotRequired.
                                        type: string
                                    required:
                                      - resourceName
                                      - restartPolicy
                                    type: object
                                  type: array
                                  x-kubernetes-list-type: atomic
                                resources:
                                  description: |-
                                    Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources
                                    already allocated to the pod.
                                  properties:
                                    claims:
                                      description: |-
                                        Claims lists the names of resources, defined in spec.resourceClaims,
                                        that are used by this container.

                                        This is an alpha field and requires enabling the
                                        DynamicResourceAllocation feature gate.

                                        This field is immutable. It can only be set for containers.
                                      items:
                                        description: ResourceClaim references one entry in PodSpec.ResourceClaims.
                                        properties:
                                          name:
                                            description: |-
                                              Name must match the name of one entry in pod.spec.resourceClaims of
                                              the Pod where this field is used. It makes that resource available
                                              inside a container.
                                            type: string
                                          request:
                                            description: |-
                                              Request is the name chosen for a request in the referenced claim.
                                              If empty, everything from the claim is made available, otherwise
                                              only the result of this request.
                                            type: string
                                        required:
                                          - name
                                        type: object
                                      type: array
                                      x-kubernetes-list-map-keys:
                                        - name
                                      x-kubernetes-list-type: map
                                    limits:
                                      additionalProperties:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                        x-kubernetes-int-or-string: true
                                      description: |-
                                        Limits describes the maximum amount of compute resources allowed.
                                        More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                      type: object
                                    requests:
                                      additionalProperties:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                        x-kubernetes-int-or-string: true
                                      description: |-
                                        Requests describes the minimum amount of compute resources required.
                                        If Requests is omitted for a container, it defaults to Limits if that is explicitly specified,
                                        otherwise to an implementation-defined value. Requests cannot exceed Limits.
                                        More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                      type: object
                                  type: object
                                restartPolicy:
                                  description: |-
                                    Restart policy for the container to manage the restart behavior of each
                                    container within a pod.
                                    This may only be set for init containers. You cannot set this field on
                                    ephemeral containers.
                                  type: string
                                securityContext:
                                  description: |-
                                    Optional: SecurityContext defines the security options the ephemeral container should be run with.
                                    If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext.
                                  properties:
                                    allowPrivilegeEscalation:
                                      description: |-
                                        AllowPrivilegeEscalation controls whether a process can gain more
                                        privileges than its parent process. This bool directly controls if
                                        the no_new_privs flag will be set on the container process.
                                        AllowPrivilegeEscalation is true always when the container is:
                                        1) run as Privileged
                                        2) has CAP_SYS_ADMIN
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    appArmorProfile:
                                      description: |-
                                        appArmorProfile is the AppArmor options to use by this container. If set, this profile
                                        overrides the pod's appArmorProfile.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        localhostProfile:
                                          description: |-
                                            localhostProfile indicates a profile loaded on the node that should be used.
                                            The profile must be preconfigured on the node to work.
                                            Must match the loaded name of the profile.
                                            Must be set if and only if type is "Localhost".
                                          type: string
                                        type:
                                          description: |-
                                            type indicates which kind of AppArmor profile will be applied.
                                            Valid options are:
                                              Localhost - a profile pre-loaded on the node.
                                              RuntimeDefault - the container runtime's default profile.
                                              Unconfined - no AppArmor enforcement.
                                          type: string
                                      required:
                                        - type
                                      type: object
                                    capabilities:
                                      description: |-
                                        The capabilities to add/drop when running containers.
                                        Defaults to the default set of capabilities granted by the container runtime.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        add:
                                          description: Added capabilities
                                          items:
                                            description: Capability represent POSIX capabilities type
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        drop:
                                          description: Removed capabilities
                                          items:
                                            description: Capability represent POSIX capabilities type
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    privileged:
                                      description: |-
                                        Run container in privileged mode.
                                        Processes in privileged containers are essentially equivalent to root on the host.
                                        Defaults to false.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    procMount:
                                      description: |-
                                        procMount denotes the type of proc mount to use for the containers.
                                        The default value is Default which uses the container runtime defaults for
                                        readonly paths and masked paths.
                                        This requires the ProcMountType feature flag to be enabled.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: string
                                    readOnlyRootFilesystem:
                                      description: |-
                                        Whether this container has a read-only root filesystem.
                                        Default is false.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    runAsGroup:
                                      description: |-
                                        The GID to run the entrypoint of the container process.
                                        Uses runtime default if unset.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      format: int64
                                      type: integer
                                    runAsNonRoot:
                                      description: |-
                                        Indicates that the container must run as a non-root user.
                                        If true, the Kubelet will validate the image at runtime to ensure that it
                                        does not run as UID 0 (root) and fail to start the container if it does.
                                        If unset or false, no such validation will be performed.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                      type: boolean
                                    runAsUser:
                                      description: |-
                                        The UID to run the entrypoint of the container process.
                                        Defaults to user specified in image metadata if unspecified.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      format: int64
                                      type: integer
                                    seLinuxOptions:
                                      description: |-
                                        The SELinux context to be applied to the container.
                                        If unspecified, the container runtime will allocate a random SELinux context for each
                                        container.  May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        level:
                                          description: Level is SELinux level label that applies to the container.
                                          type: string
                                        role:
                                          description: Role is a SELinux role label that applies to the container.
                                          type: string
                                        type:
                                          description: Type is a SELinux type label that applies to the container.
                                          type: string
                                        user:
                                          description: User is a SELinux user label that applies to the container.
                                          type: string
                                      type: object
                                    seccompProfile:
                                      description: |-
                                        The seccomp options to use by this container. If seccomp options are
                                        provided at both the pod & container level, the container options
                                        override the pod options.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        localhostProfile:
                                          description: |-
                                            localhostProfile indicates a profile defined in a file on the node should be used.
                                            The profile must be preconfigured on the node to work.
                                            Must be a descending path, relative to the kubelet's configured seccomp profile location.
                                            Must be set if type is "Localhost". Must NOT be set for any other type.
                                          type: string
                                        type:
                                          description: |-
                                            type indicates which kind of seccomp profile will be applied.
                                            Valid options are:

                                            Localhost - a profile defined in a file on the node should be used.
                                            RuntimeDefault - the container runtime default profile should be used.
                                            Unconfined - no profile should be applied.
                                          type: string
                                      required:
                                        - type
                                      type: object
                                    windowsOptions:
                                      description: |-
                                        The Windows specific settings applied to all containers.
                                        If unspecified, the options from the PodSecurityContext will be used.
                                        If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is linux.
                                      properties:
                                        gmsaCredentialSpec:
                                          description: |-
                                            GMSACredentialSpec is where the GMSA admission webhook
                                            (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the
                                            GMSA credential spec named by the GMSACredentialSpecName field.
                                          type: string
                                        gmsaCredentialSpecName:
                                          description: GMSACredentialSpecName is the name of the GMSA credential spec to use.
                                          type: string
                                        hostProcess:
                                          description: |-
                                            HostProcess determines if a container should be run as a 'Host Process' container.
                                            All of a Pod's containers must have the same effective HostProcess value
                                            (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers).
                                            In addition, if HostProcess is true then HostNetwork must also be set to true.
                                          type: boolean
                                        runAsUserName:
                                          description: |-
                                            The UserName in Windows to run the entrypoint of the container process.
                                            Defaults to the user specified in image metadata if unspecified.
                                            May also be set in PodSecurityContext. If set in both SecurityContext and
                                            PodSecurityContext, the value specified in SecurityContext takes precedence.
                                          type: string
                                      type: object
                                  type: object
                                startupProbe:
                                  description: Probes are not allowed for ephemeral containers.
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                stdin:
                                  description: |-
                                    Whether this container should allocate a buffer for stdin in the container runtime. If this
                                    is not set, reads from stdin in the container will always result in EOF.
                                    Default is false.
                                  type: boolean
                                stdinOnce:
                                  description: |-
                                    Whether the container runtime should close the stdin channel after it has been opened by
                                    a single attach. When stdin is true the stdin stream will remain open across multiple attach
                                    sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the
                                    first client attaches to stdin, and then remains open and accepts data until the client disconnects,
                                    at which time stdin is closed and remains closed until the container is restarted. If this
                                    flag is false, a container processes that reads from stdin will never receive an EOF.
                                    Default is false
                                  type: boolean
                                targetContainerName:
                                  description: |-
                                    If set, the name of the container from PodSpec that this ephemeral container targets.
                                    The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container.
                                    If not set then the ephemeral container uses the namespaces configured in the Pod spec.

                                    The container runtime must implement support for this feature. If the runtime does not
                                    support namespace targeting then the result of setting this field is undefined.
                                  type: string
                                terminationMessagePath:
                                  description: |-
                                    Optional: Path at which the file to which the container's termination message
                                    will be written is mounted into the container's filesystem.
                                    Message written is intended to be brief final status, such as an assertion failure message.
                                    Will be truncated by the node if greater than 4096 bytes. The total message length across
                                    all containers will be limited to 12kb.
                                    Defaults to /dev/termination-log.
                                    Cannot be updated.
                                  type: string
                                terminationMessagePolicy:
                                  description: |-
                                    Indicate how the termination message should be populated. File will use the contents of
                                    terminationMessagePath to populate the container status message on both success and failure.
                                    FallbackToLogsOnError will use the last chunk of container log output if the termination
                                    message file is empty and the container exited with an error.
                                    The log output is limited to 2048 bytes or 80 lines, whichever is smaller.
                                    Defaults to File.
                                    Cannot be updated.
                                  type: string
                                tty:
                                  description: |-
                                    Whether this container should allocate a TTY for itself, also requires 'stdin' to be true.
                                    Default is false.
                                  type: boolean
                                volumeDevices:
                                  description: volumeDevices is the list of block devices to be used by the container.
                                  items:
                                    description: volumeDevice describes a mapping of a raw block device within a container.
                                    properties:
                                      devicePath:
                                        description: devicePath is the path inside of the container that the device will be mapped to.
                                        type: string
                                      name:
                                        description: name must match the name of a persistentVolumeClaim in the pod
                                        type: string
                                    required:
                                      - devicePath
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - devicePath
                                  x-kubernetes-list-type: map
                                volumeMounts:
                                  description: |-
                                    Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers.
                                    Cannot be updated.
                                  items:
                                    description: VolumeMount describes a mounting of a Volume within a container.
                                    properties:
                                      mountPath:
                                        description: |-
                                          Path within the container at which the volume should be mounted.  Must
                                          not contain ':'.
                                        type: string
                                      mountPropagation:
                                        description: |-
                                          mountPropagation determines how mounts are propagated from the host
                                          to container and the other way around.
                                          When not set, MountPropagationNone is used.
                                          This field is beta in 1.10.
                                          When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified
                                          (which defaults to None).
                                        type: string
                                      name:
                                        description: This must match the Name of a Volume.
                                        type: string
                                      readOnly:
                                        description: |-
                                          Mounted read-only if true, read-write otherwise (false or unspecified).
                                          Defaults to false.
                                        type: boolean
                                      recursiveReadOnly:
                                        description: |-
                                          RecursiveReadOnly specifies whether read-only mounts should be handled
                                          recursively.

                                          If ReadOnly is false, this field has no meaning and must be unspecified.

                                          If ReadOnly is true, and this field is set to Disabled, the mount is not made
                                          recursively read-only.  If this field is set to IfPossible, the mount is made
                                          recursively read-only, if it is supported by the container runtime.  If this
                                          field is set to Enabled, the mount is made recursively read-only if it is
                                          supported by the container runtime, otherwise the pod will not be started and
                                          an error will be generated to indicate the reason.

                                          If this field is set to IfPossible or Enabled, MountPropagation must be set to
                                          None (or be unspecified, which defaults to None).

                                          If this field is not specified, it is treated as an equivalent of Disabled.
                                        type: string
                                      subPath:
                                        description: |-
                                          Path within the volume from which the container's volume should be mounted.
                                          Defaults to "" (volume's root).
                                        type: string
                                      subPathExpr:
                                        description: |-
                                          Expanded path within the volume from which the container's volume should be mounted.
                                          Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment.
                                          Defaults to "" (volume's root).
                                          SubPathExpr and SubPath are mutually exclusive.
                                        type: string
                                    required:
                                      - mountPath
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - mountPath
                                  x-kubernetes-list-type: map
                                workingDir:
                                  description: |-
                                    Container's working directory.
                                    If not specified, the container runtime's default will be used, which
                                    might be configured in the container image.
                                    Cannot be updated.
                                  type: string
                              required:
                                - name
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - name
                            x-kubernetes-list-type: map
                          hostAliases:
                            description: |-
                              HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts
                              file if specified.
                            items:
                              description: |-
                                HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the
                                pod's hosts file.
                              properties:
                                hostnames:
                                  description: Hostnames for the above IP address.
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                ip:
                                  description: IP address of the host file entry.
                                  type: string
                              required:
                                - ip
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - ip
                            x-kubernetes-list-type: map
                          hostIPC:
                            description: |-
                              Use the host's ipc namespace.
                              Optional: Default to false.
                            type: boolean
                          hostNetwork:
                            description: |-
                              Host networking requested for this pod. Use the host's network namespace.
                              If this option is set, the ports that will be used must be specified.
                              Default to false.
                            type: boolean
                          hostPID:
                            description: |-
                              Use the host's pid namespace.
                              Optional: Default to false.
                            type: boolean
                          hostUsers:
                            description: |-
                              Use the host's user namespace.
                              Optional: Default to true.
                              If set to true or not present, the pod will be run in the host user namespace, useful
                              for when the pod needs a feature only available to the host user namespace, such as
                              loading a kernel module with CAP_SYS_MODULE.
                              When set to false, a new userns is created for the pod. Setting false is useful for
                              mitigating container breakout vulnerabilities even allowing users to run their
                              containers as root without actually having root privileges on the host.
                              This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature.
                            type: boolean
                          hostname:
                            description: |-
                              Specifies the hostname of the Pod
                              If not specified, the pod's hostname will be set to a system-defined value.
                            type: string
                          imagePullSecrets:
                            description: |-
                              ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec.
                              If specified, these secrets will be passed to individual puller implementations for them to use.
                              More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod
                            items:
                              description: |-
                                LocalObjectReference contains enough information to let you locate the
                                referenced object inside the same namespace.
                              properties:
                                name:
                                  default: ""
                                  description: |-
                                    Name of the referent.
                                    This field is effectively required, but due to backwards compatibility is
                                    allowed to be empty. Instances of this type with an empty value here are
                                    almost certainly wrong.
                                    More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                  type: string
                              type: object
                              x-kubernetes-map-type: atomic
                            type: array
                            x-kubernetes-list-map-keys:
                              - name
                            x-kubernetes-list-type: map
                          initContainers:
                            description: |-
                              List of initialization containers belonging to the pod.
                              Init containers are executed in order prior to containers being started. If any
                              init container fails, the pod is considered to have failed and is handled according
                              to its restartPolicy. The name for an init container or normal container must be
                              unique among all containers.
                              Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes.
                              The resourceRequirements of an init container are taken into account during scheduling
                              by finding the highest request/limit for each resource type, and then using the max of
                              that value or the sum of the normal containers. Limits are applied to init containers
                              in a similar fashion.
                              Init containers cannot currently be added or removed.
                              Cannot be updated.
                              More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
                            items:
                              description: A single application container that you want to run within a pod.
                              properties:
                                args:
                                  description: |-
                                    Arguments to the entrypoint.
                                    The container image's CMD is used if this is not provided.
                                    Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                    cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                    to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                    produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                    of whether the variable exists or not. Cannot be updated.
                                    More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                command:
                                  description: |-
                                    Entrypoint array. Not executed within a shell.
                                    The container image's ENTRYPOINT is used if this is not provided.
                                    Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                    cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                    to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                    produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                    of whether the variable exists or not. Cannot be updated.
                                    More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                env:
                                  description: |-
                                    List of environment variables to set in the container.
                                    Cannot be updated.
                                  items:
                                    description: EnvVar represents an environment variable present in a Container.
                                    properties:
                                      name:
                                        description: Name of the environment variable. Must be a C_IDENTIFIER.
                                        type: string
                                      value:
                                        description: |-
                                          Variable references $(VAR_NAME) are expanded
                                          using the previously defined environment variables in the container and
                                          any service environment variables. If a variable cannot be resolved,
                                          the reference in the input string will be unchanged. Double $$ are reduced
                                          to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e.
                                          "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)".
                                          Escaped references will never be expanded, regardless of whether the variable
                                          exists or not.
                                          Defaults to "".
                                        type: string
                                      valueFrom:
                                        description: Source for the environment variable's value. Cannot be used if value is not empty.
                                        properties:
                                          configMapKeyRef:
                                            description: Selects a key of a ConfigMap.
                                            properties:
                                              key:
                                                description: The key to select.
                                                type: string
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: Specify whether the ConfigMap or its key must be defined
                                                type: boolean
                                            required:
                                              - key
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          fieldRef:
                                            description: |-
                                              Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`,
                                              spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
                                            properties:
                                              apiVersion:
                                                description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                                type: string
                                              fieldPath:
                                                description: Path of the field to select in the specified API version.
                                                type: string
                                            required:
                                              - fieldPath
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          resourceFieldRef:
                                            description: |-
                                              Selects a resource of the container: only resources limits and requests
                                              (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
                                            properties:
                                              containerName:
                                                description: 'Container name: required for volumes, optional for env vars'
                                                type: string
                                              divisor:
                                                anyOf:
                                                  - type: integer
                                                  - type: string
                                                description: Specifies the output format of the exposed resources, defaults to "1"
                                                pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                x-kubernetes-int-or-string: true
                                              resource:
                                                description: 'Required: resource to select'
                                                type: string
                                            required:
                                              - resource
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          secretKeyRef:
                                            description: Selects a key of a secret in the pod's namespace
                                            properties:
                                              key:
                                                description: The key of the secret to select from.  Must be a valid secret key.
                                                type: string
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: Specify whether the Secret or its key must be defined
                                                type: boolean
                                            required:
                                              - key
                                            type: object
                                            x-kubernetes-map-type: atomic
                                        type: object
                                    required:
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - name
                                  x-kubernetes-list-type: map
                                envFrom:
                                  description: |-
                                    List of sources to populate environment variables in the container.
                                    The keys defined within a source must be a C_IDENTIFIER. All invalid keys
                                    will be reported as an event when the container is starting. When a key exists in multiple
                                    sources, the value associated with the last source will take precedence.
                                    Values defined by an Env with a duplicate key will take precedence.
                                    Cannot be updated.
                                  items:
                                    description: EnvFromSource represents the source of a set of ConfigMaps or Secrets
                                    properties:
                                      configMapRef:
                                        description: The ConfigMap to select from
                                        properties:
                                          name:
                                            default: ""
                                            description: |-
                                              Name of the referent.
                                              This field is effectively required, but due to backwards compatibility is
                                              allowed to be empty. Instances of this type with an empty value here are
                                              almost certainly wrong.
                                              More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                            type: string
                                          optional:
                                            description: Specify whether the ConfigMap must be defined
                                            type: boolean
                                        type: object
                                        x-kubernetes-map-type: atomic
                                      prefix:
                                        description: Optional text to prepend to the name of each environment variable. Must be a C_IDENTIFIER.
                                        type: string
                                      secretRef:
                                        description: The Secret to select from
                                        properties:
                                          name:
                                            default: ""
                                            description: |-
                                              Name of the referent.
                                              This field is effectively required, but due to backwards compatibility is
                                              allowed to be empty. Instances of this type with an empty value here are
                                              almost certainly wrong.
                                              More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                            type: string
                                          optional:
                                            description: Specify whether the Secret must be defined
                                            type: boolean
                                        type: object
                                        x-kubernetes-map-type: atomic
                                    type: object
                                  type: array
                                  x-kubernetes-list-type: atomic
                                image:
                                  description: |-
                                    Container image name.
                                    More info: https://kubernetes.io/docs/concepts/containers/images
                                    This field is optional to allow higher level config management to default or override
                                    container images in workload controllers like Deployments and StatefulSets.
                                  type: string
                                imagePullPolicy:
                                  description: |-
                                    Image pull policy.
                                    One of Always, Never, IfNotPresent.
                                    Defaults to Always if :latest tag is specified, or IfNotPresent otherwise.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
                                  type: string
                                lifecycle:
                                  description: |-
                                    Actions that the management system should take in response to container lifecycle events.
                                    Cannot be updated.
                                  properties:
                                    postStart:
                                      description: |-
                                        PostStart is called immediately after a container is created. If the handler fails,
                                        the container is terminated and restarted according to its restart policy.
                                        Other management of the container blocks until the hook completes.
                                        More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                      properties:
                                        exec:
                                          description: Exec specifies a command to execute in the container.
                                          properties:
                                            command:
                                              description: |-
                                                Command is the command line to execute inside the container, the working directory for the
                                                command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                                not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                                a shell, you need to explicitly call out to that shell.
                                                Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                        httpGet:
                                          description: HTTPGet specifies an HTTP GET request to perform.
                                          properties:
                                            host:
                                              description: |-
                                                Host name to connect to, defaults to the pod IP. You probably want to set
                                                "Host" in httpHeaders instead.
                                              type: string
                                            httpHeaders:
                                              description: Custom headers to set in the request. HTTP allows repeated headers.
                                              items:
                                                description: HTTPHeader describes a custom header to be used in HTTP probes
                                                properties:
                                                  name:
                                                    description: |-
                                                      The header field name.
                                                      This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                    type: string
                                                  value:
                                                    description: The header field value
                                                    type: string
                                                required:
                                                  - name
                                                  - value
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            path:
                                              description: Path to access on the HTTP server.
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Name or number of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                            scheme:
                                              description: |-
                                                Scheme to use for connecting to the host.
                                                Defaults to HTTP.
                                              type: string
                                          required:
                                            - port
                                          type: object
                                        sleep:
                                          description: Sleep represents a duration that the container should sleep.
                                          properties:
                                            seconds:
                                              description: Seconds is the number of seconds to sleep.
                                              format: int64
                                              type: integer
                                          required:
                                            - seconds
                                          type: object
                                        tcpSocket:
                                          description: |-
                                            Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                            for backward compatibility. There is no validation of this field and
                                            lifecycle hooks will fail at runtime when it is specified.
                                          properties:
                                            host:
                                              description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Number or name of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                          required:
                                            - port
                                          type: object
                                      type: object
                                    preStop:
                                      description: |-
                                        PreStop is called immediately before a container is terminated due to an
                                        API request or management event such as liveness/startup probe failure,
                                        preemption, resource contention, etc. The handler is not called if the
                                        container crashes or exits. The Pod's termination grace period countdown begins before the
                                        PreStop hook is executed. Regardless of the outcome of the handler, the
                                        container will eventually terminate within the Pod's termination grace
                                        period (unless delayed by finalizers). Other management of the container blocks until the hook completes
                                        or until the termination grace period is reached.
                                        More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                      properties:
                                        exec:
                                          description: Exec specifies a command to execute in the container.
                                          properties:
                                            command:
                                              description: |-
                                                Command is the command line to execute inside the container, the working directory for the
                                                command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                                not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                                a shell, you need to explicitly call out to that shell.
                                                Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                          type: object
                                        httpGet:
                                          description: HTTPGet specifies an HTTP GET request to perform.
                                          properties:
                                            host:
                                              description: |-
                                                Host name to connect to, defaults to the pod IP. You probably want to set
                                                "Host" in httpHeaders instead.
                                              type: string
                                            httpHeaders:
                                              description: Custom headers to set in the request. HTTP allows repeated headers.
                                              items:
                                                description: HTTPHeader describes a custom header to be used in HTTP probes
                                                properties:
                                                  name:
                                                    description: |-
                                                      The header field name.
                                                      This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                    type: string
                                                  value:
                                                    description: The header field value
                                                    type: string
                                                required:
                                                  - name
                                                  - value
                                                type: object
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            path:
                                              description: Path to access on the HTTP server.
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Name or number of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                            scheme:
                                              description: |-
                                                Scheme to use for connecting to the host.
                                                Defaults to HTTP.
                                              type: string
                                          required:
                                            - port
                                          type: object
                                        sleep:
                                          description: Sleep represents a duration that the container should sleep.
                                          properties:
                                            seconds:
                                              description: Seconds is the number of seconds to sleep.
                                              format: int64
                                              type: integer
                                          required:
                                            - seconds
                                          type: object
                                        tcpSocket:
                                          description: |-
                                            Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                            for backward compatibility. There is no validation of this field and
                                            lifecycle hooks will fail at runtime when it is specified.
                                          properties:
                                            host:
                                              description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                              type: string
                                            port:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: |-
                                                Number or name of the port to access on the container.
                                                Number must be in the range 1 to 65535.
                                                Name must be an IANA_SVC_NAME.
                                              x-kubernetes-int-or-string: true
                                          required:
                                            - port
                                          type: object
                                      type: object
                                    stopSignal:
                                      description: |-
                                        StopSignal defines which signal will be sent to a container when it is being stopped.
                                        If not specified, the default is defined by the container runtime in use.
                                        StopSignal can only be set for Pods with a non-empty .spec.os.name
                                      type: string
                                  type: object
                                livenessProbe:
                                  description: |-
                                    Periodic probe of container liveness.
                                    Container will be restarted if the probe fails.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                name:
                                  description: |-
                                    Name of the container specified as a DNS_LABEL.
                                    Each container in a pod must have a unique name (DNS_LABEL).
                                    Cannot be updated.
                                  type: string
                                ports:
                                  description: |-
                                    List of ports to expose from the container. Not specifying a port here
                                    DOES NOT prevent that port from being exposed. Any port which is
                                    listening on the default "0.0.0.0" address inside a container will be
                                    accessible from the network.
                                    Modifying this array with strategic merge patch may corrupt the data.
                                    For more information See https://github.com/kubernetes/kubernetes/issues/108255.
                                    Cannot be updated.
                                  items:
                                    description: ContainerPort represents a network port in a single container.
                                    properties:
                                      containerPort:
                                        description: |-
                                          Number of port to expose on the pod's IP address.
                                          This must be a valid port number, 0 < x < 65536.
                                        format: int32
                                        type: integer
                                      hostIP:
                                        description: What host IP to bind the external port to.
                                        type: string
                                      hostPort:
                                        description: |-
                                          Number of port to expose on the host.
                                          If specified, this must be a valid port number, 0 < x < 65536.
                                          If HostNetwork is specified, this must match ContainerPort.
                                          Most containers do not need this.
                                        format: int32
                                        type: integer
                                      name:
                                        description: |-
                                          If specified, this must be an IANA_SVC_NAME and unique within the pod. Each
                                          named port in a pod must have a unique name. Name for the port that can be
                                          referred to by services.
                                        type: string
                                      protocol:
                                        default: TCP
                                        description: |-
                                          Protocol for port. Must be UDP, TCP, or SCTP.
                                          Defaults to "TCP".
                                        type: string
                                    required:
                                      - containerPort
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - containerPort
                                    - protocol
                                  x-kubernetes-list-type: map
                                readinessProbe:
                                  description: |-
                                    Periodic probe of container service readiness.
                                    Container will be removed from service endpoints if the probe fails.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                resizePolicy:
                                  description: Resources resize policy for the container.
                                  items:
                                    description: ContainerResizePolicy represents resource resize policy for the container.
                                    properties:
                                      resourceName:
                                        description: |-
                                          Name of the resource to which this resource resize policy applies.
                                          Supported values: cpu, memory.
                                        type: string
                                      restartPolicy:
                                        description: |-
                                          Restart policy to apply when specified resource is resized.
                                          If not specified, it defaults to NotRequired.
                                        type: string
                                    required:
                                      - resourceName
                                      - restartPolicy
                                    type: object
                                  type: array
                                  x-kubernetes-list-type: atomic
                                resources:
                                  description: |-
                                    Compute Resources required by this container.
                                    Cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                  properties:
                                    claims:
                                      description: |-
                                        Claims lists the names of resources, defined in spec.resourceClaims,
                                        that are used by this container.

                                        This is an alpha field and requires enabling the
                                        DynamicResourceAllocation feature gate.

                                        This field is immutable. It can only be set for containers.
                                      items:
                                        description: ResourceClaim references one entry in PodSpec.ResourceClaims.
                                        properties:
                                          name:
                                            description: |-
                                              Name must match the name of one entry in pod.spec.resourceClaims of
                                              the Pod where this field is used. It makes that resource available
                                              inside a container.
                                            type: string
                                          request:
                                            description: |-
                                              Request is the name chosen for a request in the referenced claim.
                                              If empty, everything from the claim is made available, otherwise
                                              only the result of this request.
                                            type: string
                                        required:
                                          - name
                                        type: object
                                      type: array
                                      x-kubernetes-list-map-keys:
                                        - name
                                      x-kubernetes-list-type: map
                                    limits:
                                      additionalProperties:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                        x-kubernetes-int-or-string: true
                                      description: |-
                                        Limits describes the maximum amount of compute resources allowed.
                                        More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                      type: object
                                    requests:
                                      additionalProperties:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                        x-kubernetes-int-or-string: true
                                      description: |-
                                        Requests describes the minimum amount of compute resources required.
                                        If Requests is omitted for a container, it defaults to Limits if that is explicitly specified,
                                        otherwise to an implementation-defined value. Requests cannot exceed Limits.
                                        More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                      type: object
                                  type: object
                                restartPolicy:
                                  description: |-
                                    RestartPolicy defines the restart behavior of individual containers in a pod.
                                    This field may only be set for init containers, and the only allowed value is "Always".
                                    For non-init containers or when this field is not specified,
                                    the restart behavior is defined by the Pod's restart policy and the container type.
                                    Setting the RestartPolicy as "Always" for the init container will have the following effect:
                                    this init container will be continually restarted on
                                    exit until all regular containers have terminated. Once all regular
                                    containers have completed, all init containers with restartPolicy "Always"
                                    will be shut down. This lifecycle differs from normal init containers and
                                    is often referred to as a "sidecar" container. Although this init
                                    container still starts in the init container sequence, it does not wait
                                    for the container to complete before proceeding to the next init
                                    container. Instead, the next init container starts immediately after this
                                    init container is started, or after any startupProbe has successfully
                                    completed.
                                  type: string
                                securityContext:
                                  description: |-
                                    SecurityContext defines the security options the container should be run with.
                                    If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext.
                                    More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
                                  properties:
                                    allowPrivilegeEscalation:
                                      description: |-
                                        AllowPrivilegeEscalation controls whether a process can gain more
                                        privileges than its parent process. This bool directly controls if
                                        the no_new_privs flag will be set on the container process.
                                        AllowPrivilegeEscalation is true always when the container is:
                                        1) run as Privileged
                                        2) has CAP_SYS_ADMIN
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    appArmorProfile:
                                      description: |-
                                        appArmorProfile is the AppArmor options to use by this container. If set, this profile
                                        overrides the pod's appArmorProfile.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        localhostProfile:
                                          description: |-
                                            localhostProfile indicates a profile loaded on the node that should be used.
                                            The profile must be preconfigured on the node to work.
                                            Must match the loaded name of the profile.
                                            Must be set if and only if type is "Localhost".
                                          type: string
                                        type:
                                          description: |-
                                            type indicates which kind of AppArmor profile will be applied.
                                            Valid options are:
                                              Localhost - a profile pre-loaded on the node.
                                              RuntimeDefault - the container runtime's default profile.
                                              Unconfined - no AppArmor enforcement.
                                          type: string
                                      required:
                                        - type
                                      type: object
                                    capabilities:
                                      description: |-
                                        The capabilities to add/drop when running containers.
                                        Defaults to the default set of capabilities granted by the container runtime.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        add:
                                          description: Added capabilities
                                          items:
                                            description: Capability represent POSIX capabilities type
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        drop:
                                          description: Removed capabilities
                                          items:
                                            description: Capability represent POSIX capabilities type
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    privileged:
                                      description: |-
                                        Run container in privileged mode.
                                        Processes in privileged containers are essentially equivalent to root on the host.
                                        Defaults to false.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    procMount:
                                      description: |-
                                        procMount denotes the type of proc mount to use for the containers.
                                        The default value is Default which uses the container runtime defaults for
                                        readonly paths and masked paths.
                                        This requires the ProcMountType feature flag to be enabled.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: string
                                    readOnlyRootFilesystem:
                                      description: |-
                                        Whether this container has a read-only root filesystem.
                                        Default is false.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      type: boolean
                                    runAsGroup:
                                      description: |-
                                        The GID to run the entrypoint of the container process.
                                        Uses runtime default if unset.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      format: int64
                                      type: integer
                                    runAsNonRoot:
                                      description: |-
                                        Indicates that the container must run as a non-root user.
                                        If true, the Kubelet will validate the image at runtime to ensure that it
                                        does not run as UID 0 (root) and fail to start the container if it does.
                                        If unset or false, no such validation will be performed.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                      type: boolean
                                    runAsUser:
                                      description: |-
                                        The UID to run the entrypoint of the container process.
                                        Defaults to user specified in image metadata if unspecified.
                                        May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      format: int64
                                      type: integer
                                    seLinuxOptions:
                                      description: |-
                                        The SELinux context to be applied to the container.
                                        If unspecified, the container runtime will allocate a random SELinux context for each
                                        container.  May also be set in PodSecurityContext.  If set in both SecurityContext and
                                        PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        level:
                                          description: Level is SELinux level label that applies to the container.
                                          type: string
                                        role:
                                          description: Role is a SELinux role label that applies to the container.
                                          type: string
                                        type:
                                          description: Type is a SELinux type label that applies to the container.
                                          type: string
                                        user:
                                          description: User is a SELinux user label that applies to the container.
                                          type: string
                                      type: object
                                    seccompProfile:
                                      description: |-
                                        The seccomp options to use by this container. If seccomp options are
                                        provided at both the pod & container level, the container options
                                        override the pod options.
                                        Note that this field cannot be set when spec.os.name is windows.
                                      properties:
                                        localhostProfile:
                                          description: |-
                                            localhostProfile indicates a profile defined in a file on the node should be used.
                                            The profile must be preconfigured on the node to work.
                                            Must be a descending path, relative to the kubelet's configured seccomp profile location.
                                            Must be set if type is "Localhost". Must NOT be set for any other type.
                                          type: string
                                        type:
                                          description: |-
                                            type indicates which kind of seccomp profile will be applied.
                                            Valid options are:

                                            Localhost - a profile defined in a file on the node should be used.
                                            RuntimeDefault - the container runtime default profile should be used.
                                            Unconfined - no profile should be applied.
                                          type: string
                                      required:
                                        - type
                                      type: object
                                    windowsOptions:
                                      description: |-
                                        The Windows specific settings applied to all containers.
                                        If unspecified, the options from the PodSecurityContext will be used.
                                        If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        Note that this field cannot be set when spec.os.name is linux.
                                      properties:
                                        gmsaCredentialSpec:
                                          description: |-
                                            GMSACredentialSpec is where the GMSA admission webhook
                                            (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the
                                            GMSA credential spec named by the GMSACredentialSpecName field.
                                          type: string
                                        gmsaCredentialSpecName:
                                          description: GMSACredentialSpecName is the name of the GMSA credential spec to use.
                                          type: string
                                        hostProcess:
                                          description: |-
                                            HostProcess determines if a container should be run as a 'Host Process' container.
                                            All of a Pod's containers must have the same effective HostProcess value
                                            (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers).
                                            In addition, if HostProcess is true then HostNetwork must also be set to true.
                                          type: boolean
                                        runAsUserName:
                                          description: |-
                                            The UserName in Windows to run the entrypoint of the container process.
                                            Defaults to the user specified in image metadata if unspecified.
                                            May also be set in PodSecurityContext. If set in both SecurityContext and
                                            PodSecurityContext, the value specified in SecurityContext takes precedence.
                                          type: string
                                      type: object
                                  type: object
                                startupProbe:
                                  description: |-
                                    StartupProbe indicates that the Pod has successfully initialized.
                                    If specified, no other probes are executed until this completes successfully.
                                    If this probe fails, the Pod will be restarted, just as if the livenessProbe failed.
                                    This can be used to provide different probe parameters at the beginning of a Pod's lifecycle,
                                    when it might take a long time to load data or warm a cache, than during steady-state operation.
                                    This cannot be updated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                  properties:
                                    exec:
                                      description: Exec specifies a command to execute in the container.
                                      properties:
                                        command:
                                          description: |-
                                            Command is the command line to execute inside the container, the working directory for the
                                            command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                            not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                            a shell, you need to explicitly call out to that shell.
                                            Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                          x-kubernetes-list-type: atomic
                                      type: object
                                    failureThreshold:
                                      description: |-
                                        Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                        Defaults to 3. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    grpc:
                                      description: GRPC specifies a GRPC HealthCheckRequest.
                                      properties:
                                        port:
                                          description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                          format: int32
                                          type: integer
                                        service:
                                          default: ""
                                          description: |-
                                            Service is the name of the service to place in the gRPC HealthCheckRequest
                                            (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                            If this is not specified, the default behavior is defined by gRPC.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies an HTTP GET request to perform.
                                      properties:
                                        host:
                                          description: |-
                                            Host name to connect to, defaults to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: |-
                                                  The header field name.
                                                  This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                              - name
                                              - value
                                            type: object
                                          type: array
                                          x-kubernetes-list-type: atomic
                                        path:
                                          description: Path to access on the HTTP server.
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Name or number of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: |-
                                            Scheme to use for connecting to the host.
                                            Defaults to HTTP.
                                          type: string
                                      required:
                                        - port
                                      type: object
                                    initialDelaySeconds:
                                      description: |-
                                        Number of seconds after the container has started before liveness probes are initiated.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                    periodSeconds:
                                      description: |-
                                        How often (in seconds) to perform the probe.
                                        Default to 10 seconds. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    successThreshold:
                                      description: |-
                                        Minimum consecutive successes for the probe to be considered successful after having failed.
                                        Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                      format: int32
                                      type: integer
                                    tcpSocket:
                                      description: TCPSocket specifies a connection to a TCP port.
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                            - type: integer
                                            - type: string
                                          description: |-
                                            Number or name of the port to access on the container.
                                            Number must be in the range 1 to 65535.
                                            Name must be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                        - port
                                      type: object
                                    terminationGracePeriodSeconds:
                                      description: |-
                                        Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                        The grace period is the duration in seconds after the processes running in the pod are sent
                                        a termination signal and the time when the processes are forcibly halted with a kill signal.
                                        Set this value longer than the expected cleanup time for your process.
                                        If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                        value overrides the value provided by the pod spec.
                                        Value must be non-negative integer. The value zero indicates stop immediately via
                                        the kill signal (no opportunity to shut down).
                                        This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                        Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                      format: int64
                                      type: integer
                                    timeoutSeconds:
                                      description: |-
                                        Number of seconds after which the probe times out.
                                        Defaults to 1 second. Minimum value is 1.
                                        More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                      format: int32
                                      type: integer
                                  type: object
                                stdin:
                                  description: |-
                                    Whether this container should allocate a buffer for stdin in the container runtime. If this
                                    is not set, reads from stdin in the container will always result in EOF.
                                    Default is false.
                                  type: boolean
                                stdinOnce:
                                  description: |-
                                    Whether the container runtime should close the stdin channel after it has been opened by
                                    a single attach. When stdin is true the stdin stream will remain open across multiple attach
                                    sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the
                                    first client attaches to stdin, and then remains open and accepts data until the client disconnects,
                                    at which time stdin is closed and remains closed until the container is restarted. If this
                                    flag is false, a container processes that reads from stdin will never receive an EOF.
                                    Default is false
                                  type: boolean
                                terminationMessagePath:
                                  description: |-
                                    Optional: Path at which the file to which the container's termination message
                                    will be written is mounted into the container's filesystem.
                                    Message written is intended to be brief final status, such as an assertion failure message.
                                    Will be truncated by the node if greater than 4096 bytes. The total message length across
                                    all containers will be limited to 12kb.
                                    Defaults to /dev/termination-log.
                                    Cannot be updated.
                                  type: string
                                terminationMessagePolicy:
                                  description: |-
                                    Indicate how the termination message should be populated. File will use the contents of
                                    terminationMessagePath to populate the container status message on both success and failure.
                                    FallbackToLogsOnError will use the last chunk of container log output if the termination
                                    message file is empty and the container exited with an error.
                                    The log output is limited to 2048 bytes or 80 lines, whichever is smaller.
                                    Defaults to File.
                                    Cannot be updated.
                                  type: string
                                tty:
                                  description: |-
                                    Whether this container should allocate a TTY for itself, also requires 'stdin' to be true.
                                    Default is false.
                                  type: boolean
                                volumeDevices:
                                  description: volumeDevices is the list of block devices to be used by the container.
                                  items:
                                    description: volumeDevice describes a mapping of a raw block device within a container.
                                    properties:
                                      devicePath:
                                        description: devicePath is the path inside of the container that the device will be mapped to.
                                        type: string
                                      name:
                                        description: name must match the name of a persistentVolumeClaim in the pod
                                        type: string
                                    required:
                                      - devicePath
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - devicePath
                                  x-kubernetes-list-type: map
                                volumeMounts:
                                  description: |-
                                    Pod volumes to mount into the container's filesystem.
                                    Cannot be updated.
                                  items:
                                    description: VolumeMount describes a mounting of a Volume within a container.
                                    properties:
                                      mountPath:
                                        description: |-
                                          Path within the container at which the volume should be mounted.  Must
                                          not contain ':'.
                                        type: string
                                      mountPropagation:
                                        description: |-
                                          mountPropagation determines how mounts are propagated from the host
                                          to container and the other way around.
                                          When not set, MountPropagationNone is used.
                                          This field is beta in 1.10.
                                          When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified
                                          (which defaults to None).
                                        type: string
                                      name:
                                        description: This must match the Name of a Volume.
                                        type: string
                                      readOnly:
                                        description: |-
                                          Mounted read-only if true, read-write otherwise (false or unspecified).
                                          Defaults to false.
                                        type: boolean
                                      recursiveReadOnly:
                                        description: |-
                                          RecursiveReadOnly specifies whether read-only mounts should be handled
                                          recursively.

                                          If ReadOnly is false, this field has no meaning and must be unspecified.

                                          If ReadOnly is true, and this field is set to Disabled, the mount is not made
                                          recursively read-only.  If this field is set to IfPossible, the mount is made
                                          recursively read-only, if it is supported by the container runtime.  If this
                                          field is set to Enabled, the mount is made recursively read-only if it is
                                          supported by the container runtime, otherwise the pod will not be started and
                                          an error will be generated to indicate the reason.

                                          If this field is set to IfPossible or Enabled, MountPropagation must be set to
                                          None (or be unspecified, which defaults to None).

                                          If this field is not specified, it is treated as an equivalent of Disabled.
                                        type: string
                                      subPath:
                                        description: |-
                                          Path within the volume from which the container's volume should be mounted.
                                          Defaults to "" (volume's root).
                                        type: string
                                      subPathExpr:
                                        description: |-
                                          Expanded path within the volume from which the container's volume should be mounted.
                                          Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment.
                                          Defaults to "" (volume's root).
                                          SubPathExpr and SubPath are mutually exclusive.
                                        type: string
                                    required:
                                      - mountPath
                                      - name
                                    type: object
                                  type: array
                                  x-kubernetes-list-map-keys:
                                    - mountPath
                                  x-kubernetes-list-type: map
                                workingDir:
                                  description: |-
                                    Container's working directory.
                                    If not specified, the container runtime's default will be used, which
                                    might be configured in the container image.
                                    Cannot be updated.
                                  type: string
                              required:
                                - name
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - name
                            x-kubernetes-list-type: map
                          mainContainer:
                            description: A single application container that you want to run within a pod.
                            properties:
                              args:
                                description: |-
                                  Arguments to the entrypoint.
                                  The container image's CMD is used if this is not provided.
                                  Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                  cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                  to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                  produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                  of whether the variable exists or not. Cannot be updated.
                                  More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                items:
                                  type: string
                                type: array
                                x-kubernetes-list-type: atomic
                              command:
                                description: |-
                                  Entrypoint array. Not executed within a shell.
                                  The container image's ENTRYPOINT is used if this is not provided.
                                  Variable references $(VAR_NAME) are expanded using the container's environment. If a variable
                                  cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced
                                  to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will
                                  produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless
                                  of whether the variable exists or not. Cannot be updated.
                                  More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
                                items:
                                  type: string
                                type: array
                                x-kubernetes-list-type: atomic
                              env:
                                description: |-
                                  List of environment variables to set in the container.
                                  Cannot be updated.
                                items:
                                  description: EnvVar represents an environment variable present in a Container.
                                  properties:
                                    name:
                                      description: Name of the environment variable. Must be a C_IDENTIFIER.
                                      type: string
                                    value:
                                      description: |-
                                        Variable references $(VAR_NAME) are expanded
                                        using the previously defined environment variables in the container and
                                        any service environment variables. If a variable cannot be resolved,
                                        the reference in the input string will be unchanged. Double $$ are reduced
                                        to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e.
                                        "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)".
                                        Escaped references will never be expanded, regardless of whether the variable
                                        exists or not.
                                        Defaults to "".
                                      type: string
                                    valueFrom:
                                      description: Source for the environment variable's value. Cannot be used if value is not empty.
                                      properties:
                                        configMapKeyRef:
                                          description: Selects a key of a ConfigMap.
                                          properties:
                                            key:
                                              description: The key to select.
                                              type: string
                                            name:
                                              default: ""
                                              description: |-
                                                Name of the referent.
                                                This field is effectively required, but due to backwards compatibility is
                                                allowed to be empty. Instances of this type with an empty value here are
                                                almost certainly wrong.
                                                More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              type: string
                                            optional:
                                              description: Specify whether the ConfigMap or its key must be defined
                                              type: boolean
                                          required:
                                            - key
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        fieldRef:
                                          description: |-
                                            Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`,
                                            spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
                                          properties:
                                            apiVersion:
                                              description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                              type: string
                                            fieldPath:
                                              description: Path of the field to select in the specified API version.
                                              type: string
                                          required:
                                            - fieldPath
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        resourceFieldRef:
                                          description: |-
                                            Selects a resource of the container: only resources limits and requests
                                            (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
                                          properties:
                                            containerName:
                                              description: 'Container name: required for volumes, optional for env vars'
                                              type: string
                                            divisor:
                                              anyOf:
                                                - type: integer
                                                - type: string
                                              description: Specifies the output format of the exposed resources, defaults to "1"
                                              pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                              x-kubernetes-int-or-string: true
                                            resource:
                                              description: 'Required: resource to select'
                                              type: string
                                          required:
                                            - resource
                                          type: object
                                          x-kubernetes-map-type: atomic
                                        secretKeyRef:
                                          description: Selects a key of a secret in the pod's namespace
                                          properties:
                                            key:
                                              description: The key of the secret to select from.  Must be a valid secret key.
                                              type: string
                                            name:
                                              default: ""
                                              description: |-
                                                Name of the referent.
                                                This field is effectively required, but due to backwards compatibility is
                                                allowed to be empty. Instances of this type with an empty value here are
                                                almost certainly wrong.
                                                More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              type: string
                                            optional:
                                              description: Specify whether the Secret or its key must be defined
                                              type: boolean
                                          required:
                                            - key
                                          type: object
                                          x-kubernetes-map-type: atomic
                                      type: object
                                  required:
                                    - name
                                  type: object
                                type: array
                                x-kubernetes-list-map-keys:
                                  - name
                                x-kubernetes-list-type: map
                              envFrom:
                                description: |-
                                  List of sources to populate environment variables in the container.
                                  The keys defined within a source must be a C_IDENTIFIER. All invalid keys
                                  will be reported as an event when the container is starting. When a key exists in multiple
                                  sources, the value associated with the last source will take precedence.
                                  Values defined by an Env with a duplicate key will take precedence.
                                  Cannot be updated.
                                items:
                                  description: EnvFromSource represents the source of a set of ConfigMaps or Secrets
                                  properties:
                                    configMapRef:
                                      description: The ConfigMap to select from
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                        optional:
                                          description: Specify whether the ConfigMap must be defined
                                          type: boolean
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    prefix:
                                      description: Optional text to prepend to the name of each environment variable. Must be a C_IDENTIFIER.
                                      type: string
                                    secretRef:
                                      description: The Secret to select from
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                        optional:
                                          description: Specify whether the Secret must be defined
                                          type: boolean
                                      type: object
                                      x-kubernetes-map-type: atomic
                                  type: object
                                type: array
                                x-kubernetes-list-type: atomic
                              image:
                                description: |-
                                  Container image name.
                                  More info: https://kubernetes.io/docs/concepts/containers/images
                                  This field is optional to allow higher level config management to default or override
                                  container images in workload controllers like Deployments and StatefulSets.
                                type: string
                              imagePullPolicy:
                                description: |-
                                  Image pull policy.
                                  One of Always, Never, IfNotPresent.
                                  Defaults to Always if :latest tag is specified, or IfNotPresent otherwise.
                                  Cannot be updated.
                                  More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
                                type: string
                              lifecycle:
                                description: |-
                                  Actions that the management system should take in response to container lifecycle events.
                                  Cannot be updated.
                                properties:
                                  postStart:
                                    description: |-
                                      PostStart is called immediately after a container is created. If the handler fails,
                                      the container is terminated and restarted according to its restart policy.
                                      Other management of the container blocks until the hook completes.
                                      More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                    properties:
                                      exec:
                                        description: Exec specifies a command to execute in the container.
                                        properties:
                                          command:
                                            description: |-
                                              Command is the command line to execute inside the container, the working directory for the
                                              command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                              not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                              a shell, you need to explicitly call out to that shell.
                                              Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                            items:
                                              type: string
                                            type: array
                                            x-kubernetes-list-type: atomic
                                        type: object
                                      httpGet:
                                        description: HTTPGet specifies an HTTP GET request to perform.
                                        properties:
                                          host:
                                            description: |-
                                              Host name to connect to, defaults to the pod IP. You probably want to set
                                              "Host" in httpHeaders instead.
                                            type: string
                                          httpHeaders:
                                            description: Custom headers to set in the request. HTTP allows repeated headers.
                                            items:
                                              description: HTTPHeader describes a custom header to be used in HTTP probes
                                              properties:
                                                name:
                                                  description: |-
                                                    The header field name.
                                                    This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                  type: string
                                                value:
                                                  description: The header field value
                                                  type: string
                                              required:
                                                - name
                                                - value
                                              type: object
                                            type: array
                                            x-kubernetes-list-type: atomic
                                          path:
                                            description: Path to access on the HTTP server.
                                            type: string
                                          port:
                                            anyOf:
                                              - type: integer
                                              - type: string
                                            description: |-
                                              Name or number of the port to access on the container.
                                              Number must be in the range 1 to 65535.
                                              Name must be an IANA_SVC_NAME.
                                            x-kubernetes-int-or-string: true
                                          scheme:
                                            description: |-
                                              Scheme to use for connecting to the host.
                                              Defaults to HTTP.
                                            type: string
                                        required:
                                          - port
                                        type: object
                                      sleep:
                                        description: Sleep represents a duration that the container should sleep.
                                        properties:
                                          seconds:
                                            description: Seconds is the number of seconds to sleep.
                                            format: int64
                                            type: integer
                                        required:
                                          - seconds
                                        type: object
                                      tcpSocket:
                                        description: |-
                                          Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                          for backward compatibility. There is no validation of this field and
                                          lifecycle hooks will fail at runtime when it is specified.
                                        properties:
                                          host:
                                            description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                            type: string
                                          port:
                                            anyOf:
                                              - type: integer
                                              - type: string
                                            description: |-
                                              Number or name of the port to access on the container.
                                              Number must be in the range 1 to 65535.
                                              Name must be an IANA_SVC_NAME.
                                            x-kubernetes-int-or-string: true
                                        required:
                                          - port
                                        type: object
                                    type: object
                                  preStop:
                                    description: |-
                                      PreStop is called immediately before a container is terminated due to an
                                      API request or management event such as liveness/startup probe failure,
                                      preemption, resource contention, etc. The handler is not called if the
                                      container crashes or exits. The Pod's termination grace period countdown begins before the
                                      PreStop hook is executed. Regardless of the outcome of the handler, the
                                      container will eventually terminate within the Pod's termination grace
                                      period (unless delayed by finalizers). Other management of the container blocks until the hook completes
                                      or until the termination grace period is reached.
                                      More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
                                    properties:
                                      exec:
                                        description: Exec specifies a command to execute in the container.
                                        properties:
                                          command:
                                            description: |-
                                              Command is the command line to execute inside the container, the working directory for the
                                              command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                              not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                              a shell, you need to explicitly call out to that shell.
                                              Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                            items:
                                              type: string
                                            type: array
                                            x-kubernetes-list-type: atomic
                                        type: object
                                      httpGet:
                                        description: HTTPGet specifies an HTTP GET request to perform.
                                        properties:
                                          host:
                                            description: |-
                                              Host name to connect to, defaults to the pod IP. You probably want to set
                                              "Host" in httpHeaders instead.
                                            type: string
                                          httpHeaders:
                                            description: Custom headers to set in the request. HTTP allows repeated headers.
                                            items:
                                              description: HTTPHeader describes a custom header to be used in HTTP probes
                                              properties:
                                                name:
                                                  description: |-
                                                    The header field name.
                                                    This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                                  type: string
                                                value:
                                                  description: The header field value
                                                  type: string
                                              required:
                                                - name
                                                - value
                                              type: object
                                            type: array
                                            x-kubernetes-list-type: atomic
                                          path:
                                            description: Path to access on the HTTP server.
                                            type: string
                                          port:
                                            anyOf:
                                              - type: integer
                                              - type: string
                                            description: |-
                                              Name or number of the port to access on the container.
                                              Number must be in the range 1 to 65535.
                                              Name must be an IANA_SVC_NAME.
                                            x-kubernetes-int-or-string: true
                                          scheme:
                                            description: |-
                                              Scheme to use for connecting to the host.
                                              Defaults to HTTP.
                                            type: string
                                        required:
                                          - port
                                        type: object
                                      sleep:
                                        description: Sleep represents a duration that the container should sleep.
                                        properties:
                                          seconds:
                                            description: Seconds is the number of seconds to sleep.
                                            format: int64
                                            type: integer
                                        required:
                                          - seconds
                                        type: object
                                      tcpSocket:
                                        description: |-
                                          Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept
                                          for backward compatibility. There is no validation of this field and
                                          lifecycle hooks will fail at runtime when it is specified.
                                        properties:
                                          host:
                                            description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                            type: string
                                          port:
                                            anyOf:
                                              - type: integer
                                              - type: string
                                            description: |-
                                              Number or name of the port to access on the container.
                                              Number must be in the range 1 to 65535.
                                              Name must be an IANA_SVC_NAME.
                                            x-kubernetes-int-or-string: true
                                        required:
                                          - port
                                        type: object
                                    type: object
                                  stopSignal:
                                    description: |-
                                      StopSignal defines which signal will be sent to a container when it is being stopped.
                                      If not specified, the default is defined by the container runtime in use.
                                      StopSignal can only be set for Pods with a non-empty .spec.os.name
                                    type: string
                                type: object
                              livenessProbe:
                                description: |-
                                  Periodic probe of container liveness.
                                  Container will be restarted if the probe fails.
                                  Cannot be updated.
                                  More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                properties:
                                  exec:
                                    description: Exec specifies a command to execute in the container.
                                    properties:
                                      command:
                                        description: |-
                                          Command is the command line to execute inside the container, the working directory for the
                                          command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                          not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                          a shell, you need to explicitly call out to that shell.
                                          Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                        items:
                                          type: string
                                        type: array
                                        x-kubernetes-list-type: atomic
                                    type: object
                                  failureThreshold:
                                    description: |-
                                      Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                      Defaults to 3. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  grpc:
                                    description: GRPC specifies a GRPC HealthCheckRequest.
                                    properties:
                                      port:
                                        description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                        format: int32
                                        type: integer
                                      service:
                                        default: ""
                                        description: |-
                                          Service is the name of the service to place in the gRPC HealthCheckRequest
                                          (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                          If this is not specified, the default behavior is defined by gRPC.
                                        type: string
                                    required:
                                      - port
                                    type: object
                                  httpGet:
                                    description: HTTPGet specifies an HTTP GET request to perform.
                                    properties:
                                      host:
                                        description: |-
                                          Host name to connect to, defaults to the pod IP. You probably want to set
                                          "Host" in httpHeaders instead.
                                        type: string
                                      httpHeaders:
                                        description: Custom headers to set in the request. HTTP allows repeated headers.
                                        items:
                                          description: HTTPHeader describes a custom header to be used in HTTP probes
                                          properties:
                                            name:
                                              description: |-
                                                The header field name.
                                                This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                              type: string
                                            value:
                                              description: The header field value
                                              type: string
                                          required:
                                            - name
                                            - value
                                          type: object
                                        type: array
                                        x-kubernetes-list-type: atomic
                                      path:
                                        description: Path to access on the HTTP server.
                                        type: string
                                      port:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        description: |-
                                          Name or number of the port to access on the container.
                                          Number must be in the range 1 to 65535.
                                          Name must be an IANA_SVC_NAME.
                                        x-kubernetes-int-or-string: true
                                      scheme:
                                        description: |-
                                          Scheme to use for connecting to the host.
                                          Defaults to HTTP.
                                        type: string
                                    required:
                                      - port
                                    type: object
                                  initialDelaySeconds:
                                    description: |-
                                      Number of seconds after the container has started before liveness probes are initiated.
                                      More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                    format: int32
                                    type: integer
                                  periodSeconds:
                                    description: |-
                                      How often (in seconds) to perform the probe.
                                      Default to 10 seconds. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  successThreshold:
                                    description: |-
                                      Minimum consecutive successes for the probe to be considered successful after having failed.
                                      Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  tcpSocket:
                                    description: TCPSocket specifies a connection to a TCP port.
                                    properties:
                                      host:
                                        description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                        type: string
                                      port:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        description: |-
                                          Number or name of the port to access on the container.
                                          Number must be in the range 1 to 65535.
                                          Name must be an IANA_SVC_NAME.
                                        x-kubernetes-int-or-string: true
                                    required:
                                      - port
                                    type: object
                                  terminationGracePeriodSeconds:
                                    description: |-
                                      Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                      The grace period is the duration in seconds after the processes running in the pod are sent
                                      a termination signal and the time when the processes are forcibly halted with a kill signal.
                                      Set this value longer than the expected cleanup time for your process.
                                      If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                      value overrides the value provided by the pod spec.
                                      Value must be non-negative integer. The value zero indicates stop immediately via
                                      the kill signal (no opportunity to shut down).
                                      This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                      Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                    format: int64
                                    type: integer
                                  timeoutSeconds:
                                    description: |-
                                      Number of seconds after which the probe times out.
                                      Defaults to 1 second. Minimum value is 1.
                                      More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                    format: int32
                                    type: integer
                                type: object
                              name:
                                description: |-
                                  Name of the container specified as a DNS_LABEL.
                                  Each container in a pod must have a unique name (DNS_LABEL).
                                  Cannot be updated.
                                type: string
                              ports:
                                description: |-
                                  List of ports to expose from the container. Not specifying a port here
                                  DOES NOT prevent that port from being exposed. Any port which is
                                  listening on the default "0.0.0.0" address inside a container will be
                                  accessible from the network.
                                  Modifying this array with strategic merge patch may corrupt the data.
                                  For more information See https://github.com/kubernetes/kubernetes/issues/108255.
                                  Cannot be updated.
                                items:
                                  description: ContainerPort represents a network port in a single container.
                                  properties:
                                    containerPort:
                                      description: |-
                                        Number of port to expose on the pod's IP address.
                                        This must be a valid port number, 0 < x < 65536.
                                      format: int32
                                      type: integer
                                    hostIP:
                                      description: What host IP to bind the external port to.
                                      type: string
                                    hostPort:
                                      description: |-
                                        Number of port to expose on the host.
                                        If specified, this must be a valid port number, 0 < x < 65536.
                                        If HostNetwork is specified, this must match ContainerPort.
                                        Most containers do not need this.
                                      format: int32
                                      type: integer
                                    name:
                                      description: |-
                                        If specified, this must be an IANA_SVC_NAME and unique within the pod. Each
                                        named port in a pod must have a unique name. Name for the port that can be
                                        referred to by services.
                                      type: string
                                    protocol:
                                      default: TCP
                                      description: |-
                                        Protocol for port. Must be UDP, TCP, or SCTP.
                                        Defaults to "TCP".
                                      type: string
                                  required:
                                    - containerPort
                                  type: object
                                type: array
                                x-kubernetes-list-map-keys:
                                  - containerPort
                                  - protocol
                                x-kubernetes-list-type: map
                              readinessProbe:
                                description: |-
                                  Periodic probe of container service readiness.
                                  Container will be removed from service endpoints if the probe fails.
                                  Cannot be updated.
                                  More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                properties:
                                  exec:
                                    description: Exec specifies a command to execute in the container.
                                    properties:
                                      command:
                                        description: |-
                                          Command is the command line to execute inside the container, the working directory for the
                                          command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                          not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                          a shell, you need to explicitly call out to that shell.
                                          Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                        items:
                                          type: string
                                        type: array
                                        x-kubernetes-list-type: atomic
                                    type: object
                                  failureThreshold:
                                    description: |-
                                      Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                      Defaults to 3. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  grpc:
                                    description: GRPC specifies a GRPC HealthCheckRequest.
                                    properties:
                                      port:
                                        description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                        format: int32
                                        type: integer
                                      service:
                                        default: ""
                                        description: |-
                                          Service is the name of the service to place in the gRPC HealthCheckRequest
                                          (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                          If this is not specified, the default behavior is defined by gRPC.
                                        type: string
                                    required:
                                      - port
                                    type: object
                                  httpGet:
                                    description: HTTPGet specifies an HTTP GET request to perform.
                                    properties:
                                      host:
                                        description: |-
                                          Host name to connect to, defaults to the pod IP. You probably want to set
                                          "Host" in httpHeaders instead.
                                        type: string
                                      httpHeaders:
                                        description: Custom headers to set in the request. HTTP allows repeated headers.
                                        items:
                                          description: HTTPHeader describes a custom header to be used in HTTP probes
                                          properties:
                                            name:
                                              description: |-
                                                The header field name.
                                                This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                              type: string
                                            value:
                                              description: The header field value
                                              type: string
                                          required:
                                            - name
                                            - value
                                          type: object
                                        type: array
                                        x-kubernetes-list-type: atomic
                                      path:
                                        description: Path to access on the HTTP server.
                                        type: string
                                      port:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        description: |-
                                          Name or number of the port to access on the container.
                                          Number must be in the range 1 to 65535.
                                          Name must be an IANA_SVC_NAME.
                                        x-kubernetes-int-or-string: true
                                      scheme:
                                        description: |-
                                          Scheme to use for connecting to the host.
                                          Defaults to HTTP.
                                        type: string
                                    required:
                                      - port
                                    type: object
                                  initialDelaySeconds:
                                    description: |-
                                      Number of seconds after the container has started before liveness probes are initiated.
                                      More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                    format: int32
                                    type: integer
                                  periodSeconds:
                                    description: |-
                                      How often (in seconds) to perform the probe.
                                      Default to 10 seconds. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  successThreshold:
                                    description: |-
                                      Minimum consecutive successes for the probe to be considered successful after having failed.
                                      Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  tcpSocket:
                                    description: TCPSocket specifies a connection to a TCP port.
                                    properties:
                                      host:
                                        description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                        type: string
                                      port:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        description: |-
                                          Number or name of the port to access on the container.
                                          Number must be in the range 1 to 65535.
                                          Name must be an IANA_SVC_NAME.
                                        x-kubernetes-int-or-string: true
                                    required:
                                      - port
                                    type: object
                                  terminationGracePeriodSeconds:
                                    description: |-
                                      Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                      The grace period is the duration in seconds after the processes running in the pod are sent
                                      a termination signal and the time when the processes are forcibly halted with a kill signal.
                                      Set this value longer than the expected cleanup time for your process.
                                      If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                      value overrides the value provided by the pod spec.
                                      Value must be non-negative integer. The value zero indicates stop immediately via
                                      the kill signal (no opportunity to shut down).
                                      This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                      Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                    format: int64
                                    type: integer
                                  timeoutSeconds:
                                    description: |-
                                      Number of seconds after which the probe times out.
                                      Defaults to 1 second. Minimum value is 1.
                                      More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                    format: int32
                                    type: integer
                                type: object
                              resizePolicy:
                                description: Resources resize policy for the container.
                                items:
                                  description: ContainerResizePolicy represents resource resize policy for the container.
                                  properties:
                                    resourceName:
                                      description: |-
                                        Name of the resource to which this resource resize policy applies.
                                        Supported values: cpu, memory.
                                      type: string
                                    restartPolicy:
                                      description: |-
                                        Restart policy to apply when specified resource is resized.
                                        If not specified, it defaults to NotRequired.
                                      type: string
                                  required:
                                    - resourceName
                                    - restartPolicy
                                  type: object
                                type: array
                                x-kubernetes-list-type: atomic
                              resources:
                                description: |-
                                  Compute Resources required by this container.
                                  Cannot be updated.
                                  More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                properties:
                                  claims:
                                    description: |-
                                      Claims lists the names of resources, defined in spec.resourceClaims,
                                      that are used by this container.

                                      This is an alpha field and requires enabling the
                                      DynamicResourceAllocation feature gate.

                                      This field is immutable. It can only be set for containers.
                                    items:
                                      description: ResourceClaim references one entry in PodSpec.ResourceClaims.
                                      properties:
                                        name:
                                          description: |-
                                            Name must match the name of one entry in pod.spec.resourceClaims of
                                            the Pod where this field is used. It makes that resource available
                                            inside a container.
                                          type: string
                                        request:
                                          description: |-
                                            Request is the name chosen for a request in the referenced claim.
                                            If empty, everything from the claim is made available, otherwise
                                            only the result of this request.
                                          type: string
                                      required:
                                        - name
                                      type: object
                                    type: array
                                    x-kubernetes-list-map-keys:
                                      - name
                                    x-kubernetes-list-type: map
                                  limits:
                                    additionalProperties:
                                      anyOf:
                                        - type: integer
                                        - type: string
                                      pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                      x-kubernetes-int-or-string: true
                                    description: |-
                                      Limits describes the maximum amount of compute resources allowed.
                                      More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                    type: object
                                  requests:
                                    additionalProperties:
                                      anyOf:
                                        - type: integer
                                        - type: string
                                      pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                      x-kubernetes-int-or-string: true
                                    description: |-
                                      Requests describes the minimum amount of compute resources required.
                                      If Requests is omitted for a container, it defaults to Limits if that is explicitly specified,
                                      otherwise to an implementation-defined value. Requests cannot exceed Limits.
                                      More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                    type: object
                                type: object
                              restartPolicy:
                                description: |-
                                  RestartPolicy defines the restart behavior of individual containers in a pod.
                                  This field may only be set for init containers, and the only allowed value is "Always".
                                  For non-init containers or when this field is not specified,
                                  the restart behavior is defined by the Pod's restart policy and the container type.
                                  Setting the RestartPolicy as "Always" for the init container will have the following effect:
                                  this init container will be continually restarted on
                                  exit until all regular containers have terminated. Once all regular
                                  containers have completed, all init containers with restartPolicy "Always"
                                  will be shut down. This lifecycle differs from normal init containers and
                                  is often referred to as a "sidecar" container. Although this init
                                  container still starts in the init container sequence, it does not wait
                                  for the container to complete before proceeding to the next init
                                  container. Instead, the next init container starts immediately after this
                                  init container is started, or after any startupProbe has successfully
                                  completed.
                                type: string
                              securityContext:
                                description: |-
                                  SecurityContext defines the security options the container should be run with.
                                  If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext.
                                  More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
                                properties:
                                  allowPrivilegeEscalation:
                                    description: |-
                                      AllowPrivilegeEscalation controls whether a process can gain more
                                      privileges than its parent process. This bool directly controls if
                                      the no_new_privs flag will be set on the container process.
                                      AllowPrivilegeEscalation is true always when the container is:
                                      1) run as Privileged
                                      2) has CAP_SYS_ADMIN
                                      Note that this field cannot be set when spec.os.name is windows.
                                    type: boolean
                                  appArmorProfile:
                                    description: |-
                                      appArmorProfile is the AppArmor options to use by this container. If set, this profile
                                      overrides the pod's appArmorProfile.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    properties:
                                      localhostProfile:
                                        description: |-
                                          localhostProfile indicates a profile loaded on the node that should be used.
                                          The profile must be preconfigured on the node to work.
                                          Must match the loaded name of the profile.
                                          Must be set if and only if type is "Localhost".
                                        type: string
                                      type:
                                        description: |-
                                          type indicates which kind of AppArmor profile will be applied.
                                          Valid options are:
                                            Localhost - a profile pre-loaded on the node.
                                            RuntimeDefault - the container runtime's default profile.
                                            Unconfined - no AppArmor enforcement.
                                        type: string
                                    required:
                                      - type
                                    type: object
                                  capabilities:
                                    description: |-
                                      The capabilities to add/drop when running containers.
                                      Defaults to the default set of capabilities granted by the container runtime.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    properties:
                                      add:
                                        description: Added capabilities
                                        items:
                                          description: Capability represent POSIX capabilities type
                                          type: string
                                        type: array
                                        x-kubernetes-list-type: atomic
                                      drop:
                                        description: Removed capabilities
                                        items:
                                          description: Capability represent POSIX capabilities type
                                          type: string
                                        type: array
                                        x-kubernetes-list-type: atomic
                                    type: object
                                  privileged:
                                    description: |-
                                      Run container in privileged mode.
                                      Processes in privileged containers are essentially equivalent to root on the host.
                                      Defaults to false.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    type: boolean
                                  procMount:
                                    description: |-
                                      procMount denotes the type of proc mount to use for the containers.
                                      The default value is Default which uses the container runtime defaults for
                                      readonly paths and masked paths.
                                      This requires the ProcMountType feature flag to be enabled.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    type: string
                                  readOnlyRootFilesystem:
                                    description: |-
                                      Whether this container has a read-only root filesystem.
                                      Default is false.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    type: boolean
                                  runAsGroup:
                                    description: |-
                                      The GID to run the entrypoint of the container process.
                                      Uses runtime default if unset.
                                      May also be set in PodSecurityContext.  If set in both SecurityContext and
                                      PodSecurityContext, the value specified in SecurityContext takes precedence.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    format: int64
                                    type: integer
                                  runAsNonRoot:
                                    description: |-
                                      Indicates that the container must run as a non-root user.
                                      If true, the Kubelet will validate the image at runtime to ensure that it
                                      does not run as UID 0 (root) and fail to start the container if it does.
                                      If unset or false, no such validation will be performed.
                                      May also be set in PodSecurityContext.  If set in both SecurityContext and
                                      PodSecurityContext, the value specified in SecurityContext takes precedence.
                                    type: boolean
                                  runAsUser:
                                    description: |-
                                      The UID to run the entrypoint of the container process.
                                      Defaults to user specified in image metadata if unspecified.
                                      May also be set in PodSecurityContext.  If set in both SecurityContext and
                                      PodSecurityContext, the value specified in SecurityContext takes precedence.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    format: int64
                                    type: integer
                                  seLinuxOptions:
                                    description: |-
                                      The SELinux context to be applied to the container.
                                      If unspecified, the container runtime will allocate a random SELinux context for each
                                      container.  May also be set in PodSecurityContext.  If set in both SecurityContext and
                                      PodSecurityContext, the value specified in SecurityContext takes precedence.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    properties:
                                      level:
                                        description: Level is SELinux level label that applies to the container.
                                        type: string
                                      role:
                                        description: Role is a SELinux role label that applies to the container.
                                        type: string
                                      type:
                                        description: Type is a SELinux type label that applies to the container.
                                        type: string
                                      user:
                                        description: User is a SELinux user label that applies to the container.
                                        type: string
                                    type: object
                                  seccompProfile:
                                    description: |-
                                      The seccomp options to use by this container. If seccomp options are
                                      provided at both the pod & container level, the container options
                                      override the pod options.
                                      Note that this field cannot be set when spec.os.name is windows.
                                    properties:
                                      localhostProfile:
                                        description: |-
                                          localhostProfile indicates a profile defined in a file on the node should be used.
                                          The profile must be preconfigured on the node to work.
                                          Must be a descending path, relative to the kubelet's configured seccomp profile location.
                                          Must be set if type is "Localhost". Must NOT be set for any other type.
                                        type: string
                                      type:
                                        description: |-
                                          type indicates which kind of seccomp profile will be applied.
                                          Valid options are:

                                          Localhost - a profile defined in a file on the node should be used.
                                          RuntimeDefault - the container runtime default profile should be used.
                                          Unconfined - no profile should be applied.
                                        type: string
                                    required:
                                      - type
                                    type: object
                                  windowsOptions:
                                    description: |-
                                      The Windows specific settings applied to all containers.
                                      If unspecified, the options from the PodSecurityContext will be used.
                                      If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
                                      Note that this field cannot be set when spec.os.name is linux.
                                    properties:
                                      gmsaCredentialSpec:
                                        description: |-
                                          GMSACredentialSpec is where the GMSA admission webhook
                                          (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the
                                          GMSA credential spec named by the GMSACredentialSpecName field.
                                        type: string
                                      gmsaCredentialSpecName:
                                        description: GMSACredentialSpecName is the name of the GMSA credential spec to use.
                                        type: string
                                      hostProcess:
                                        description: |-
                                          HostProcess determines if a container should be run as a 'Host Process' container.
                                          All of a Pod's containers must have the same effective HostProcess value
                                          (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers).
                                          In addition, if HostProcess is true then HostNetwork must also be set to true.
                                        type: boolean
                                      runAsUserName:
                                        description: |-
                                          The UserName in Windows to run the entrypoint of the container process.
                                          Defaults to the user specified in image metadata if unspecified.
                                          May also be set in PodSecurityContext. If set in both SecurityContext and
                                          PodSecurityContext, the value specified in SecurityContext takes precedence.
                                        type: string
                                    type: object
                                type: object
                              startupProbe:
                                description: |-
                                  StartupProbe indicates that the Pod has successfully initialized.
                                  If specified, no other probes are executed until this completes successfully.
                                  If this probe fails, the Pod will be restarted, just as if the livenessProbe failed.
                                  This can be used to provide different probe parameters at the beginning of a Pod's lifecycle,
                                  when it might take a long time to load data or warm a cache, than during steady-state operation.
                                  This cannot be updated.
                                  More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                properties:
                                  exec:
                                    description: Exec specifies a command to execute in the container.
                                    properties:
                                      command:
                                        description: |-
                                          Command is the command line to execute inside the container, the working directory for the
                                          command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                          not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                          a shell, you need to explicitly call out to that shell.
                                          Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                        items:
                                          type: string
                                        type: array
                                        x-kubernetes-list-type: atomic
                                    type: object
                                  failureThreshold:
                                    description: |-
                                      Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                      Defaults to 3. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  grpc:
                                    description: GRPC specifies a GRPC HealthCheckRequest.
                                    properties:
                                      port:
                                        description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                        format: int32
                                        type: integer
                                      service:
                                        default: ""
                                        description: |-
                                          Service is the name of the service to place in the gRPC HealthCheckRequest
                                          (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                          If this is not specified, the default behavior is defined by gRPC.
                                        type: string
                                    required:
                                      - port
                                    type: object
                                  httpGet:
                                    description: HTTPGet specifies an HTTP GET request to perform.
                                    properties:
                                      host:
                                        description: |-
                                          Host name to connect to, defaults to the pod IP. You probably want to set
                                          "Host" in httpHeaders instead.
                                        type: string
                                      httpHeaders:
                                        description: Custom headers to set in the request. HTTP allows repeated headers.
                                        items:
                                          description: HTTPHeader describes a custom header to be used in HTTP probes
                                          properties:
                                            name:
                                              description: |-
                                                The header field name.
                                                This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                              type: string
                                            value:
                                              description: The header field value
                                              type: string
                                          required:
                                            - name
                                            - value
                                          type: object
                                        type: array
                                        x-kubernetes-list-type: atomic
                                      path:
                                        description: Path to access on the HTTP server.
                                        type: string
                                      port:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        description: |-
                                          Name or number of the port to access on the container.
                                          Number must be in the range 1 to 65535.
                                          Name must be an IANA_SVC_NAME.
                                        x-kubernetes-int-or-string: true
                                      scheme:
                                        description: |-
                                          Scheme to use for connecting to the host.
                                          Defaults to HTTP.
                                        type: string
                                    required:
                                      - port
                                    type: object
                                  initialDelaySeconds:
                                    description: |-
                                      Number of seconds after the container has started before liveness probes are initiated.
                                      More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                    format: int32
                                    type: integer
                                  periodSeconds:
                                    description: |-
                                      How often (in seconds) to perform the probe.
                                      Default to 10 seconds. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  successThreshold:
                                    description: |-
                                      Minimum consecutive successes for the probe to be considered successful after having failed.
                                      Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  tcpSocket:
                                    description: TCPSocket specifies a connection to a TCP port.
                                    properties:
                                      host:
                                        description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                        type: string
                                      port:
                                        anyOf:
                                          - type: integer
                                          - type: string
                                        description: |-
                                          Number or name of the port to access on the container.
                                          Number must be in the range 1 to 65535.
                                          Name must be an IANA_SVC_NAME.
                                        x-kubernetes-int-or-string: true
                                    required:
                                      - port
                                    type: object
                                  terminationGracePeriodSeconds:
                                    description: |-
                                      Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                                      The grace period is the duration in seconds after the processes running in the pod are sent
                                      a termination signal and the time when the processes are forcibly halted with a kill signal.
                                      Set this value longer than the expected cleanup time for your process.
                                      If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                                      value overrides the value provided by the pod spec.
                                      Value must be non-negative integer. The value zero indicates stop immediately via
                                      the kill signal (no opportunity to shut down).
                                      This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                                      Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                                    format: int64
                                    type: integer
                                  timeoutSeconds:
                                    description: |-
                                      Number of seconds after which the probe times out.
                                      Defaults to 1 second. Minimum value is 1.
                                      More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                    format: int32
                                    type: integer
                                type: object
                              stdin:
                                description: |-
                                  Whether this container should allocate a buffer for stdin in the container runtime. If this
                                  is not set, reads from stdin in the container will always result in EOF.
                                  Default is false.
                                type: boolean
                              stdinOnce:
                                description: |-
                                  Whether the container runtime should close the stdin channel after it has been opened by
                                  a single attach. When stdin is true the stdin stream will remain open across multiple attach
                                  sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the
                                  first client attaches to stdin, and then remains open and accepts data until the client disconnects,
                                  at which time stdin is closed and remains closed until the container is restarted. If this
                                  flag is false, a container processes that reads from stdin will never receive an EOF.
                                  Default is false
                                type: boolean
                              terminationMessagePath:
                                description: |-
                                  Optional: Path at which the file to which the container's termination message
                                  will be written is mounted into the container's filesystem.
                                  Message written is intended to be brief final status, such as an assertion failure message.
                                  Will be truncated by the node if greater than 4096 bytes. The total message length across
                                  all containers will be limited to 12kb.
                                  Defaults to /dev/termination-log.
                                  Cannot be updated.
                                type: string
                              terminationMessagePolicy:
                                description: |-
                                  Indicate how the termination message should be populated. File will use the contents of
                                  terminationMessagePath to populate the container status message on both success and failure.
                                  FallbackToLogsOnError will use the last chunk of container log output if the termination
                                  message file is empty and the container exited with an error.
                                  The log output is limited to 2048 bytes or 80 lines, whichever is smaller.
                                  Defaults to File.
                                  Cannot be updated.
                                type: string
                              tty:
                                description: |-
                                  Whether this container should allocate a TTY for itself, also requires 'stdin' to be true.
                                  Default is false.
                                type: boolean
                              volumeDevices:
                                description: volumeDevices is the list of block devices to be used by the container.
                                items:
                                  description: volumeDevice describes a mapping of a raw block device within a container.
                                  properties:
                                    devicePath:
                                      description: devicePath is the path inside of the container that the device will be mapped to.
                                      type: string
                                    name:
                                      description: name must match the name of a persistentVolumeClaim in the pod
                                      type: string
                                  required:
                                    - devicePath
                                    - name
                                  type: object
                                type: array
                                x-kubernetes-list-map-keys:
                                  - devicePath
                                x-kubernetes-list-type: map
                              volumeMounts:
                                description: |-
                                  Pod volumes to mount into the container's filesystem.
                                  Cannot be updated.
                                items:
                                  description: VolumeMount describes a mounting of a Volume within a container.
                                  properties:
                                    mountPath:
                                      description: |-
                                        Path within the container at which the volume should be mounted.  Must
                                        not contain ':'.
                                      type: string
                                    mountPropagation:
                                      description: |-
                                        mountPropagation determines how mounts are propagated from the host
                                        to container and the other way around.
                                        When not set, MountPropagationNone is used.
                                        This field is beta in 1.10.
                                        When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified
                                        (which defaults to None).
                                      type: string
                                    name:
                                      description: This must match the Name of a Volume.
                                      type: string
                                    readOnly:
                                      description: |-
                                        Mounted read-only if true, read-write otherwise (false or unspecified).
                                        Defaults to false.
                                      type: boolean
                                    recursiveReadOnly:
                                      description: |-
                                        RecursiveReadOnly specifies whether read-only mounts should be handled
                                        recursively.

                                        If ReadOnly is false, this field has no meaning and must be unspecified.

                                        If ReadOnly is true, and this field is set to Disabled, the mount is not made
                                        recursively read-only.  If this field is set to IfPossible, the mount is made
                                        recursively read-only, if it is supported by the container runtime.  If this
                                        field is set to Enabled, the mount is made recursively read-only if it is
                                        supported by the container runtime, otherwise the pod will not be started and
                                        an error will be generated to indicate the reason.

                                        If this field is set to IfPossible or Enabled, MountPropagation must be set to
                                        None (or be unspecified, which defaults to None).

                                        If this field is not specified, it is treated as an equivalent of Disabled.
                                      type: string
                                    subPath:
                                      description: |-
                                        Path within the volume from which the container's volume should be mounted.
                                        Defaults to "" (volume's root).
                                      type: string
                                    subPathExpr:
                                      description: |-
                                        Expanded path within the volume from which the container's volume should be mounted.
                                        Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment.
                                        Defaults to "" (volume's root).
                                        SubPathExpr and SubPath are mutually exclusive.
                                      type: string
                                  required:
                                    - mountPath
                                    - name
                                  type: object
                                type: array
                                x-kubernetes-list-map-keys:
                                  - mountPath
                                x-kubernetes-list-type: map
                              workingDir:
                                description: |-
                                  Container's working directory.
                                  If not specified, the container runtime's default will be used, which
                                  might be configured in the container image.
                                  Cannot be updated.
                                type: string
                            required: []
                            type: object
                          nodeName:
                            description: |-
                              NodeName indicates in which node this pod is scheduled.
                              If empty, this pod is a candidate for scheduling by the scheduler defined in schedulerName.
                              Once this field is set, the kubelet for this node becomes responsible for the lifecycle of this pod.
                              This field should not be used to express a desire for the pod to be scheduled on a specific node.
                              https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#nodename
                            type: string
                          nodeSelector:
                            additionalProperties:
                              type: string
                            description: |-
                              NodeSelector is a selector which must be true for the pod to fit on a node.
                              Selector which must match a node's labels for the pod to be scheduled on that node.
                              More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/
                            type: object
                            x-kubernetes-map-type: atomic
                          os:
                            description: |-
                              Specifies the OS of the containers in the pod.
                              Some pod and container fields are restricted if this is set.

                              If the OS field is set to linux, the following fields must be unset:
                              -securityContext.windowsOptions

                              If the OS field is set to windows, following fields must be unset:
                              - spec.hostPID
                              - spec.hostIPC
                              - spec.hostUsers
                              - spec.securityContext.appArmorProfile
                              - spec.securityContext.seLinuxOptions
                              - spec.securityContext.seccompProfile
                              - spec.securityContext.fsGroup
                              - spec.securityContext.fsGroupChangePolicy
                              - spec.securityContext.sysctls
                              - spec.shareProcessNamespace
                              - spec.securityContext.runAsUser
                              - spec.securityContext.runAsGroup
                              - spec.securityContext.supplementalGroups
                              - spec.securityContext.supplementalGroupsPolicy
                              - spec.containers[*].securityContext.appArmorProfile
                              - spec.containers[*].securityContext.seLinuxOptions
                              - spec.containers[*].securityContext.seccompProfile
                              - spec.containers[*].securityContext.capabilities
                              - spec.containers[*].securityContext.readOnlyRootFilesystem
                              - spec.containers[*].securityContext.privileged
                              - spec.containers[*].securityContext.allowPrivilegeEscalation
                              - spec.containers[*].securityContext.procMount
                              - spec.containers[*].securityContext.runAsUser
                              - spec.containers[*].securityContext.runAsGroup
                            properties:
                              name:
                                description: |-
                                  Name is the name of the operating system. The currently supported values are linux and windows.
                                  Additional value may be defined in future and can be one of:
                                  https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration
                                  Clients should expect to handle additional values and treat unrecognized values in this field as os: null
                                type: string
                            required:
                              - name
                            type: object
                          overhead:
                            additionalProperties:
                              anyOf:
                                - type: integer
                                - type: string
                              pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                              x-kubernetes-int-or-string: true
                            description: |-
                              Overhead represents the resource overhead associated with running a pod for a given RuntimeClass.
                              This field will be autopopulated at admission time by the RuntimeClass admission controller. If
                              the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests.
                              The RuntimeClass admission controller will reject Pod create requests which have the overhead already
                              set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value
                              defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero.
                              More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md
                            type: object
                          preemptionPolicy:
                            description: |-
                              PreemptionPolicy is the Policy for preempting pods with lower priority.
                              One of Never, PreemptLowerPriority.
                              Defaults to PreemptLowerPriority if unset.
                            type: string
                          priority:
                            description: |-
                              The priority value. Various system components use this field to find the
                              priority of the pod. When Priority Admission Controller is enabled, it
                              prevents users from setting this field. The admission controller populates
                              this field from PriorityClassName.
                              The higher the value, the higher the priority.
                            format: int32
                            type: integer
                          priorityClassName:
                            description: |-
                              If specified, indicates the pod's priority. "system-node-critical" and
                              "system-cluster-critical" are two special keywords which indicate the
                              highest priorities with the former being the highest priority. Any other
                              name must be defined by creating a PriorityClass object with that name.
                              If not specified, the pod priority will be default or zero if there is no
                              default.
                            type: string
                          readinessGates:
                            description: |-
                              If specified, all readiness gates will be evaluated for pod readiness.
                              A pod is ready when all its containers are ready AND
                              all conditions specified in the readiness gates have status equal to "True"
                              More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates
                            items:
                              description: PodReadinessGate contains the reference to a pod condition
                              properties:
                                conditionType:
                                  description: ConditionType refers to a condition in the pod's condition list with matching type.
                                  type: string
                              required:
                                - conditionType
                              type: object
                            type: array
                            x-kubernetes-list-type: atomic
                          resourceClaims:
                            description: |-
                              ResourceClaims defines which ResourceClaims must be allocated
                              and reserved before the Pod is allowed to start. The resources
                              will be made available to those containers which consume them
                              by name.

                              This is an alpha field and requires enabling the
                              DynamicResourceAllocation feature gate.

                              This field is immutable.
                            items:
                              description: |-
                                PodResourceClaim references exactly one ResourceClaim, either directly
                                or by naming a ResourceClaimTemplate which is then turned into a ResourceClaim
                                for the pod.

                                It adds a name to it that uniquely identifies the ResourceClaim inside the Pod.
                                Containers that need access to the ResourceClaim reference it with this name.
                              properties:
                                name:
                                  description: |-
                                    Name uniquely identifies this resource claim inside the pod.
                                    This must be a DNS_LABEL.
                                  type: string
                                resourceClaimName:
                                  description: |-
                                    ResourceClaimName is the name of a ResourceClaim object in the same
                                    namespace as this pod.

                                    Exactly one of ResourceClaimName and ResourceClaimTemplateName must
                                    be set.
                                  type: string
                                resourceClaimTemplateName:
                                  description: |-
                                    ResourceClaimTemplateName is the name of a ResourceClaimTemplate
                                    object in the same namespace as this pod.

                                    The template will be used to create a new ResourceClaim, which will
                                    be bound to this pod. When this pod is deleted, the ResourceClaim
                                    will also be deleted. The pod name and resource name, along with a
                                    generated component, will be used to form a unique name for the
                                    ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses.

                                    This field is immutable and no changes will be made to the
                                    corresponding ResourceClaim by the control plane after creating the
                                    ResourceClaim.

                                    Exactly one of ResourceClaimName and ResourceClaimTemplateName must
                                    be set.
                                  type: string
                              required:
                                - name
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - name
                            x-kubernetes-list-type: map
                          resources:
                            description: |-
                              Resources is the total amount of CPU and Memory resources required by all
                              containers in the pod. It supports specifying Requests and Limits for
                              "cpu" and "memory" resource names only. ResourceClaims are not supported.

                              This field enables fine-grained control over resource allocation for the
                              entire pod, allowing resource sharing among containers in a pod.

                              This is an alpha field and requires enabling the PodLevelResources feature
                              gate.
                            properties:
                              claims:
                                description: |-
                                  Claims lists the names of resources, defined in spec.resourceClaims,
                                  that are used by this container.

                                  This is an alpha field and requires enabling the
                                  DynamicResourceAllocation feature gate.

                                  This field is immutable. It can only be set for containers.
                                items:
                                  description: ResourceClaim references one entry in PodSpec.ResourceClaims.
                                  properties:
                                    name:
                                      description: |-
                                        Name must match the name of one entry in pod.spec.resourceClaims of
                                        the Pod where this field is used. It makes that resource available
                                        inside a container.
                                      type: string
                                    request:
                                      description: |-
                                        Request is the name chosen for a request in the referenced claim.
                                        If empty, everything from the claim is made available, otherwise
                                        only the result of this request.
                                      type: string
                                  required:
                                    - name
                                  type: object
                                type: array
                                x-kubernetes-list-map-keys:
                                  - name
                                x-kubernetes-list-type: map
                              limits:
                                additionalProperties:
                                  anyOf:
                                    - type: integer
                                    - type: string
                                  pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                  x-kubernetes-int-or-string: true
                                description: |-
                                  Limits describes the maximum amount of compute resources allowed.
                                  More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                type: object
                              requests:
                                additionalProperties:
                                  anyOf:
                                    - type: integer
                                    - type: string
                                  pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                  x-kubernetes-int-or-string: true
                                description: |-
                                  Requests describes the minimum amount of compute resources required.
                                  If Requests is omitted for a container, it defaults to Limits if that is explicitly specified,
                                  otherwise to an implementation-defined value. Requests cannot exceed Limits.
                                  More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                type: object
                            type: object
                          restartPolicy:
                            description: |-
                              Restart policy for all containers within the pod.
                              One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted.
                              Default to Always.
                              More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy
                            type: string
                          runtimeClassName:
                            description: |-
                              RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used
                              to run this pod.  If no RuntimeClass resource matches the named class, the pod will not be run.
                              If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an
                              empty definition that uses the default runtime handler.
                              More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class
                            type: string
                          schedulerName:
                            description: |-
                              If specified, the pod will be dispatched by specified scheduler.
                              If not specified, the pod will be dispatched by default scheduler.
                            type: string
                          schedulingGates:
                            description: |-
                              SchedulingGates is an opaque list of values that if specified will block scheduling the pod.
                              If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the
                              scheduler will not attempt to schedule the pod.

                              SchedulingGates can only be set at pod creation time, and be removed only afterwards.
                            items:
                              description: PodSchedulingGate is associated to a Pod to guard its scheduling.
                              properties:
                                name:
                                  description: |-
                                    Name of the scheduling gate.
                                    Each scheduling gate must have a unique name field.
                                  type: string
                              required:
                                - name
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - name
                            x-kubernetes-list-type: map
                          securityContext:
                            description: |-
                              SecurityContext holds pod-level security attributes and common container settings.
                              Optional: Defaults to empty.  See type description for default values of each field.
                            properties:
                              appArmorProfile:
                                description: |-
                                  appArmorProfile is the AppArmor options to use by the containers in this pod.
                                  Note that this field cannot be set when spec.os.name is windows.
                                properties:
                                  localhostProfile:
                                    description: |-
                                      localhostProfile indicates a profile loaded on the node that should be used.
                                      The profile must be preconfigured on the node to work.
                                      Must match the loaded name of the profile.
                                      Must be set if and only if type is "Localhost".
                                    type: string
                                  type:
                                    description: |-
                                      type indicates which kind of AppArmor profile will be applied.
                                      Valid options are:
                                        Localhost - a profile pre-loaded on the node.
                                        RuntimeDefault - the container runtime's default profile.
                                        Unconfined - no AppArmor enforcement.
                                    type: string
                                required:
                                  - type
                                type: object
                              fsGroup:
                                description: |-
                                  A special supplemental group that applies to all containers in a pod.
                                  Some volume types allow the Kubelet to change the ownership of that volume
                                  to be owned by the pod:

                                  1. The owning GID will be the FSGroup
                                  2. The setgid bit is set (new files created in the volume will be owned by FSGroup)
                                  3. The permission bits are OR'd with rw-rw----

                                  If unset, the Kubelet will not modify the ownership and permissions of any volume.
                                  Note that this field cannot be set when spec.os.name is windows.
                                format: int64
                                type: integer
                              fsGroupChangePolicy:
                                description: |-
                                  fsGroupChangePolicy defines behavior of changing ownership and permission of the volume
                                  before being exposed inside Pod. This field will only apply to
                                  volume types which support fsGroup based ownership(and permissions).
                                  It will have no effect on ephemeral volume types such as: secret, configmaps
                                  and emptydir.
                                  Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used.
                                  Note that this field cannot be set when spec.os.name is windows.
                                type: string
                              runAsGroup:
                                description: |-
                                  The GID to run the entrypoint of the container process.
                                  Uses runtime default if unset.
                                  May also be set in SecurityContext.  If set in both SecurityContext and
                                  PodSecurityContext, the value specified in SecurityContext takes precedence
                                  for that container.
                                  Note that this field cannot be set when spec.os.name is windows.
                                format: int64
                                type: integer
                              runAsNonRoot:
                                description: |-
                                  Indicates that the container must run as a non-root user.
                                  If true, the Kubelet will validate the image at runtime to ensure that it
                                  does not run as UID 0 (root) and fail to start the container if it does.
                                  If unset or false, no such validation will be performed.
                                  May also be set in SecurityContext.  If set in both SecurityContext and
                                  PodSecurityContext, the value specified in SecurityContext takes precedence.
                                type: boolean
                              runAsUser:
                                description: |-
                                  The UID to run the entrypoint of the container process.
                                  Defaults to user specified in image metadata if unspecified.
                                  May also be set in SecurityContext.  If set in both SecurityContext and
                                  PodSecurityContext, the value specified in SecurityContext takes precedence
                                  for that container.
                                  Note that this field cannot be set when spec.os.name is windows.
                                format: int64
                                type: integer
                              seLinuxChangePolicy:
                                description: |-
                                  seLinuxChangePolicy defines how the container's SELinux label is applied to all volumes used by the Pod.
                                  It has no effect on nodes that do not support SELinux or to volumes does not support SELinux.
                                  Valid values are "MountOption" and "Recursive".

                                  "Recursive" means relabeling of all files on all Pod volumes by the container runtime.
                                  This may be slow for large volumes, but allows mixing privileged and unprivileged Pods sharing the same volume on the same node.

                                  "MountOption" mounts all eligible Pod volumes with `-o context` mount option.
                                  This requires all Pods that share the same volume to use the same SELinux label.
                                  It is not possible to share the same volume among privileged and unprivileged Pods.
                                  Eligible volumes are in-tree FibreChannel and iSCSI volumes, and all CSI volumes
                                  whose CSI driver announces SELinux support by setting spec.seLinuxMount: true in their
                                  CSIDriver instance. Other volumes are always re-labelled recursively.
                                  "MountOption" value is allowed only when SELinuxMount feature gate is enabled.

                                  If not specified and SELinuxMount feature gate is enabled, "MountOption" is used.
                                  If not specified and SELinuxMount feature gate is disabled, "MountOption" is used for ReadWriteOncePod volumes
                                  and "Recursive" for all other volumes.

                                  This field affects only Pods that have SELinux label set, either in PodSecurityContext or in SecurityContext of all containers.

                                  All Pods that use the same volume should use the same seLinuxChangePolicy, otherwise some pods can get stuck in ContainerCreating state.
                                  Note that this field cannot be set when spec.os.name is windows.
                                type: string
                              seLinuxOptions:
                                description: |-
                                  The SELinux context to be applied to all containers.
                                  If unspecified, the container runtime will allocate a random SELinux context for each
                                  container.  May also be set in SecurityContext.  If set in
                                  both SecurityContext and PodSecurityContext, the value specified in SecurityContext
                                  takes precedence for that container.
                                  Note that this field cannot be set when spec.os.name is windows.
                                properties:
                                  level:
                                    description: Level is SELinux level label that applies to the container.
                                    type: string
                                  role:
                                    description: Role is a SELinux role label that applies to the container.
                                    type: string
                                  type:
                                    description: Type is a SELinux type label that applies to the container.
                                    type: string
                                  user:
                                    description: User is a SELinux user label that applies to the container.
                                    type: string
                                type: object
                              seccompProfile:
                                description: |-
                                  The seccomp options to use by the containers in this pod.
                                  Note that this field cannot be set when spec.os.name is windows.
                                properties:
                                  localhostProfile:
                                    description: |-
                                      localhostProfile indicates a profile defined in a file on the node should be used.
                                      The profile must be preconfigured on the node to work.
                                      Must be a descending path, relative to the kubelet's configured seccomp profile location.
                                      Must be set if type is "Localhost". Must NOT be set for any other type.
                                    type: string
                                  type:
                                    description: |-
                                      type indicates which kind of seccomp profile will be applied.
                                      Valid options are:

                                      Localhost - a profile defined in a file on the node should be used.
                                      RuntimeDefault - the container runtime default profile should be used.
                                      Unconfined - no profile should be applied.
                                    type: string
                                required:
                                  - type
                                type: object
                              supplementalGroups:
                                description: |-
                                  A list of groups applied to the first process run in each container, in
                                  addition to the container's primary GID and fsGroup (if specified).  If
                                  the SupplementalGroupsPolicy feature is enabled, the
                                  supplementalGroupsPolicy field determines whether these are in addition
                                  to or instead of any group memberships defined in the container image.
                                  If unspecified, no additional groups are added, though group memberships
                                  defined in the container image may still be used, depending on the
                                  supplementalGroupsPolicy field.
                                  Note that this field cannot be set when spec.os.name is windows.
                                items:
                                  format: int64
                                  type: integer
                                type: array
                                x-kubernetes-list-type: atomic
                              supplementalGroupsPolicy:
                                description: |-
                                  Defines how supplemental groups of the first container processes are calculated.
                                  Valid values are "Merge" and "Strict". If not specified, "Merge" is used.
                                  (Alpha) Using the field requires the SupplementalGroupsPolicy feature gate to be enabled
                                  and the container runtime must implement support for this feature.
                                  Note that this field cannot be set when spec.os.name is windows.
                                type: string
                              sysctls:
                                description: |-
                                  Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported
                                  sysctls (by the container runtime) might fail to launch.
                                  Note that this field cannot be set when spec.os.name is windows.
                                items:
                                  description: Sysctl defines a kernel parameter to be set
                                  properties:
                                    name:
                                      description: Name of a property to set
                                      type: string
                                    value:
                                      description: Value of a property to set
                                      type: string
                                  required:
                                    - name
                                    - value
                                  type: object
                                type: array
                                x-kubernetes-list-type: atomic
                              windowsOptions:
                                description: |-
                                  The Windows specific settings applied to all containers.
                                  If unspecified, the options within a container's SecurityContext will be used.
                                  If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
                                  Note that this field cannot be set when spec.os.name is linux.
                                properties:
                                  gmsaCredentialSpec:
                                    description: |-
                                      GMSACredentialSpec is where the GMSA admission webhook
                                      (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the
                                      GMSA credential spec named by the GMSACredentialSpecName field.
                                    type: string
                                  gmsaCredentialSpecName:
                                    description: GMSACredentialSpecName is the name of the GMSA credential spec to use.
                                    type: string
                                  hostProcess:
                                    description: |-
                                      HostProcess determines if a container should be run as a 'Host Process' container.
                                      All of a Pod's containers must have the same effective HostProcess value
                                      (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers).
                                      In addition, if HostProcess is true then HostNetwork must also be set to true.
                                    type: boolean
                                  runAsUserName:
                                    description: |-
                                      The UserName in Windows to run the entrypoint of the container process.
                                      Defaults to the user specified in image metadata if unspecified.
                                      May also be set in PodSecurityContext. If set in both SecurityContext and
                                      PodSecurityContext, the value specified in SecurityContext takes precedence.
                                    type: string
                                type: object
                            type: object
                          serviceAccount:
                            description: |-
                              DeprecatedServiceAccount is a deprecated alias for ServiceAccountName.
                              Deprecated: Use serviceAccountName instead.
                            type: string
                          serviceAccountName:
                            description: |-
                              ServiceAccountName is the name of the ServiceAccount to use to run this pod.
                              More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
                            type: string
                          setHostnameAsFQDN:
                            description: |-
                              If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default).
                              In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname).
                              In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters to FQDN.
                              If a pod does not have FQDN, this has no effect.
                              Default to false.
                            type: boolean
                          shareProcessNamespace:
                            description: |-
                              Share a single process namespace between all of the containers in a pod.
                              When this is set containers will be able to view and signal processes from other containers
                              in the same pod, and the first process in each container will not be assigned PID 1.
                              HostPID and ShareProcessNamespace cannot both be set.
                              Optional: Default to false.
                            type: boolean
                          subdomain:
                            description: |-
                              If specified, the fully qualified Pod hostname will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster domain>".
                              If not specified, the pod will not have a domainname at all.
                            type: string
                          terminationGracePeriodSeconds:
                            description: |-
                              Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request.
                              Value must be non-negative integer. The value zero indicates stop immediately via
                              the kill signal (no opportunity to shut down).
                              If this value is nil, the default grace period will be used instead.
                              The grace period is the duration in seconds after the processes running in the pod are sent
                              a termination signal and the time when the processes are forcibly halted with a kill signal.
                              Set this value longer than the expected cleanup time for your process.
                              Defaults to 30 seconds.
                            format: int64
                            type: integer
                          tolerations:
                            description: If specified, the pod's tolerations.
                            items:
                              description: |-
                                The pod this Toleration is attached to tolerates any taint that matches
                                the triple <key,value,effect> using the matching operator <operator>.
                              properties:
                                effect:
                                  description: |-
                                    Effect indicates the taint effect to match. Empty means match all taint effects.
                                    When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.
                                  type: string
                                key:
                                  description: |-
                                    Key is the taint key that the toleration applies to. Empty means match all taint keys.
                                    If the key is empty, operator must be Exists; this combination means to match all values and all keys.
                                  type: string
                                operator:
                                  description: |-
                                    Operator represents a key's relationship to the value.
                                    Valid operators are Exists and Equal. Defaults to Equal.
                                    Exists is equivalent to wildcard for value, so that a pod can
                                    tolerate all taints of a particular category.
                                  type: string
                                tolerationSeconds:
                                  description: |-
                                    TolerationSeconds represents the period of time the toleration (which must be
                                    of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default,
                                    it is not set, which means tolerate the taint forever (do not evict). Zero and
                                    negative values will be treated as 0 (evict immediately) by the system.
                                  format: int64
                                  type: integer
                                value:
                                  description: |-
                                    Value is the taint value the toleration matches to.
                                    If the operator is Exists, the value should be empty, otherwise just a regular string.
                                  type: string
                              type: object
                            type: array
                            x-kubernetes-list-type: atomic
                          topologySpreadConstraints:
                            description: |-
                              TopologySpreadConstraints describes how a group of pods ought to spread across topology
                              domains. Scheduler will schedule pods in a way which abides by the constraints.
                              All topologySpreadConstraints are ANDed.
                            items:
                              description: TopologySpreadConstraint specifies how to spread matching pods among the given topology.
                              properties:
                                labelSelector:
                                  description: |-
                                    LabelSelector is used to find matching pods.
                                    Pods that match this label selector are counted to determine the number of pods
                                    in their corresponding topology domain.
                                  properties:
                                    matchExpressions:
                                      description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                      items:
                                        description: |-
                                          A label selector requirement is a selector that contains values, a key, and an operator that
                                          relates the key and values.
                                        properties:
                                          key:
                                            description: key is the label key that the selector applies to.
                                            type: string
                                          operator:
                                            description: |-
                                              operator represents a key's relationship to a set of values.
                                              Valid operators are In, NotIn, Exists and DoesNotExist.
                                            type: string
                                          values:
                                            description: |-
                                              values is an array of string values. If the operator is In or NotIn,
                                              the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                              the values array must be empty. This array is replaced during a strategic
                                              merge patch.
                                            items:
                                              type: string
                                            type: array
                                            x-kubernetes-list-type: atomic
                                        required:
                                          - key
                                          - operator
                                        type: object
                                      type: array
                                      x-kubernetes-list-type: atomic
                                    matchLabels:
                                      additionalProperties:
                                        type: string
                                      description: |-
                                        matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                        map is equivalent to an element of matchExpressions, whose key field is "key", the
                                        operator is "In", and the values array contains only "value". The requirements are ANDed.
                                      type: object
                                  type: object
                                  x-kubernetes-map-type: atomic
                                matchLabelKeys:
                                  description: |-
                                    MatchLabelKeys is a set of pod label keys to select the pods over which
                                    spreading will be calculated. The keys are used to lookup values from the
                                    incoming pod labels, those key-value labels are ANDed with labelSelector
                                    to select the group of existing pods over which spreading will be calculated
                                    for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector.
                                    MatchLabelKeys cannot be set when LabelSelector isn't set.
                                    Keys that don't exist in the incoming pod labels will
                                    be ignored. A null or empty list means only match against labelSelector.

                                    This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default).
                                  items:
                                    type: string
                                  type: array
                                  x-kubernetes-list-type: atomic
                                maxSkew:
                                  description: |-
                                    MaxSkew describes the degree to which pods may be unevenly distributed.
                                    When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference
                                    between the number of matching pods in the target topology and the global minimum.
                                    The global minimum is the minimum number of matching pods in an eligible domain
                                    or zero if the number of eligible domains is less than MinDomains.
                                    For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same
                                    labelSelector spread as 2/2/1:
                                    In this case, the global minimum is 1.
                                    | zone1 | zone2 | zone3 |
                                    |  P P  |  P P  |   P   |
                                    - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2;
                                    scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2)
                                    violate MaxSkew(1).
                                    - if MaxSkew is 2, incoming pod can be scheduled onto any zone.
                                    When `whenUnsatisfiable=ScheduleAnyway`, it is used to give higher precedence
                                    to topologies that satisfy it.
                                    It's a required field. Default value is 1 and 0 is not allowed.
                                  format: int32
                                  type: integer
                                minDomains:
                                  description: |-
                                    MinDomains indicates a minimum number of eligible domains.
                                    When the number of eligible domains with matching topology keys is less than minDomains,
                                    Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed.
                                    And when the number of eligible domains with matching topology keys equals or greater than minDomains,
                                    this value has no effect on scheduling.
                                    As a result, when the number of eligible domains is less than minDomains,
                                    scheduler won't schedule more than maxSkew Pods to those domains.
                                    If value is nil, the constraint behaves as if MinDomains is equal to 1.
                                    Valid values are integers greater than 0.
                                    When value is not nil, WhenUnsatisfiable must be DoNotSchedule.

                                    For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same
                                    labelSelector spread as 2/2/2:
                                    | zone1 | zone2 | zone3 |
                                    |  P P  |  P P  |  P P  |
                                    The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0.
                                    In this situation, new pod with the same labelSelector cannot be scheduled,
                                    because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones,
                                    it will violate MaxSkew.
                                  format: int32
                                  type: integer
                                nodeAffinityPolicy:
                                  description: |-
                                    NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector
                                    when calculating pod topology spread skew. Options are:
                                    - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations.
                                    - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations.

                                    If this value is nil, the behavior is equivalent to the Honor policy.
                                  type: string
                                nodeTaintsPolicy:
                                  description: |-
                                    NodeTaintsPolicy indicates how we will treat node taints when calculating
                                    pod topology spread skew. Options are:
                                    - Honor: nodes without taints, along with tainted nodes for which the incoming pod
                                    has a toleration, are included.
                                    - Ignore: node taints are ignored. All nodes are included.

                                    If this value is nil, the behavior is equivalent to the Ignore policy.
                                  type: string
                                topologyKey:
                                  description: |-
                                    TopologyKey is the key of node labels. Nodes that have a label with this key
                                    and identical values are considered to be in the same topology.
                                    We consider each <key, value> as a "bucket", and try to put balanced number
                                    of pods into each bucket.
                                    We define a domain as a particular instance of a topology.
                                    Also, we define an eligible domain as a domain whose nodes meet the requirements of
                                    nodeAffinityPolicy and nodeTaintsPolicy.
                                    e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology.
                                    And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology.
                                    It's a required field.
                                  type: string
                                whenUnsatisfiable:
                                  description: |-
                                    WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy
                                    the spread constraint.
                                    - DoNotSchedule (default) tells the scheduler not to schedule it.
                                    - ScheduleAnyway tells the scheduler to schedule the pod in any location,
                                      but giving higher precedence to topologies that would help reduce the
                                      skew.
                                    A constraint is considered "Unsatisfiable" for an incoming pod
                                    if and only if every possible node assignment for that pod would violate
                                    "MaxSkew" on some topology.
                                    For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same
                                    labelSelector spread as 3/1/1:
                                    | zone1 | zone2 | zone3 |
                                    | P P P |   P   |   P   |
                                    If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled
                                    to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies
                                    MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler
                                    won't make it *more* imbalanced.
                                    It's a required field.
                                  type: string
                              required:
                                - maxSkew
                                - topologyKey
                                - whenUnsatisfiable
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - topologyKey
                              - whenUnsatisfiable
                            x-kubernetes-list-type: map
                          volumes:
                            description: |-
                              List of volumes that can be mounted by containers belonging to the pod.
                              More info: https://kubernetes.io/docs/concepts/storage/volumes
                            items:
                              description: Volume represents a named volume in a pod that may be accessed by any container in the pod.
                              properties:
                                awsElasticBlockStore:
                                  description: |-
                                    awsElasticBlockStore represents an AWS Disk resource that is attached to a
                                    kubelet's host machine and then exposed to the pod.
                                    Deprecated: AWSElasticBlockStore is deprecated. All operations for the in-tree
                                    awsElasticBlockStore type are redirected to the ebs.csi.aws.com CSI driver.
                                    More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type of the volume that you want to mount.
                                        Tip: Ensure that the filesystem type is supported by the host operating system.
                                        Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
                                      type: string
                                    partition:
                                      description: |-
                                        partition is the partition in the volume that you want to mount.
                                        If omitted, the default is to mount by volume name.
                                        Examples: For volume /dev/sda1, you specify the partition as "1".
                                        Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty).
                                      format: int32
                                      type: integer
                                    readOnly:
                                      description: |-
                                        readOnly value true will force the readOnly setting in VolumeMounts.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
                                      type: boolean
                                    volumeID:
                                      description: |-
                                        volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume).
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
                                      type: string
                                  required:
                                    - volumeID
                                  type: object
                                azureDisk:
                                  description: |-
                                    azureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.
                                    Deprecated: AzureDisk is deprecated. All operations for the in-tree azureDisk type
                                    are redirected to the disk.csi.azure.com CSI driver.
                                  properties:
                                    cachingMode:
                                      description: 'cachingMode is the Host Caching mode: None, Read Only, Read Write.'
                                      type: string
                                    diskName:
                                      description: diskName is the Name of the data disk in the blob storage
                                      type: string
                                    diskURI:
                                      description: diskURI is the URI of data disk in the blob storage
                                      type: string
                                    fsType:
                                      default: ext4
                                      description: |-
                                        fsType is Filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                      type: string
                                    kind:
                                      description: 'kind expected values are Shared: multiple blob disks per storage account  Dedicated: single blob disk per storage account  Managed: azure managed data disk (only in managed availability set). defaults to shared'
                                      type: string
                                    readOnly:
                                      default: false
                                      description: |-
                                        readOnly Defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                      type: boolean
                                  required:
                                    - diskName
                                    - diskURI
                                  type: object
                                azureFile:
                                  description: |-
                                    azureFile represents an Azure File Service mount on the host and bind mount to the pod.
                                    Deprecated: AzureFile is deprecated. All operations for the in-tree azureFile type
                                    are redirected to the file.csi.azure.com CSI driver.
                                  properties:
                                    readOnly:
                                      description: |-
                                        readOnly defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                      type: boolean
                                    secretName:
                                      description: secretName is the  name of secret that contains Azure Storage Account Name and Key
                                      type: string
                                    shareName:
                                      description: shareName is the azure share Name
                                      type: string
                                  required:
                                    - secretName
                                    - shareName
                                  type: object
                                cephfs:
                                  description: |-
                                    cephFS represents a Ceph FS mount on the host that shares a pod's lifetime.
                                    Deprecated: CephFS is deprecated and the in-tree cephfs type is no longer supported.
                                  properties:
                                    monitors:
                                      description: |-
                                        monitors is Required: Monitors is a collection of Ceph monitors
                                        More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
                                      items:
                                        type: string
                                      type: array
                                      x-kubernetes-list-type: atomic
                                    path:
                                      description: 'path is Optional: Used as the mounted root, rather than the full Ceph tree, default is /'
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly is Optional: Defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                        More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
                                      type: boolean
                                    secretFile:
                                      description: |-
                                        secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret
                                        More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
                                      type: string
                                    secretRef:
                                      description: |-
                                        secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty.
                                        More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    user:
                                      description: |-
                                        user is optional: User is the rados user name, default is admin
                                        More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
                                      type: string
                                  required:
                                    - monitors
                                  type: object
                                cinder:
                                  description: |-
                                    cinder represents a cinder volume attached and mounted on kubelets host machine.
                                    Deprecated: Cinder is deprecated. All operations for the in-tree cinder type
                                    are redirected to the cinder.csi.openstack.org CSI driver.
                                    More info: https://examples.k8s.io/mysql-cinder-pd/README.md
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                        More info: https://examples.k8s.io/mysql-cinder-pd/README.md
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                        More info: https://examples.k8s.io/mysql-cinder-pd/README.md
                                      type: boolean
                                    secretRef:
                                      description: |-
                                        secretRef is optional: points to a secret object containing parameters used to connect
                                        to OpenStack.
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    volumeID:
                                      description: |-
                                        volumeID used to identify the volume in cinder.
                                        More info: https://examples.k8s.io/mysql-cinder-pd/README.md
                                      type: string
                                  required:
                                    - volumeID
                                  type: object
                                configMap:
                                  description: configMap represents a configMap that should populate this volume
                                  properties:
                                    defaultMode:
                                      description: |-
                                        defaultMode is optional: mode bits used to set permissions on created files by default.
                                        Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                        YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                        Defaults to 0644.
                                        Directories within the path are not affected by this setting.
                                        This might be in conflict with other options that affect the file
                                        mode, like fsGroup, and the result can be other mode bits set.
                                      format: int32
                                      type: integer
                                    items:
                                      description: |-
                                        items if unspecified, each key-value pair in the Data field of the referenced
                                        ConfigMap will be projected into the volume as a file whose name is the
                                        key and content is the value. If specified, the listed keys will be
                                        projected into the specified paths, and unlisted keys will not be
                                        present. If a key is specified which is not present in the ConfigMap,
                                        the volume setup will error unless it is marked optional. Paths must be
                                        relative and may not contain the '..' path or start with '..'.
                                      items:
                                        description: Maps a string key to a path within a volume.
                                        properties:
                                          key:
                                            description: key is the key to project.
                                            type: string
                                          mode:
                                            description: |-
                                              mode is Optional: mode bits used to set permissions on this file.
                                              Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                              YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                              If not specified, the volume defaultMode will be used.
                                              This might be in conflict with other options that affect the file
                                              mode, like fsGroup, and the result can be other mode bits set.
                                            format: int32
                                            type: integer
                                          path:
                                            description: |-
                                              path is the relative path of the file to map the key to.
                                              May not be an absolute path.
                                              May not contain the path element '..'.
                                              May not start with the string '..'.
                                            type: string
                                        required:
                                          - key
                                          - path
                                        type: object
                                      type: array
                                      x-kubernetes-list-type: atomic
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: optional specify whether the ConfigMap or its keys must be defined
                                      type: boolean
                                  type: object
                                  x-kubernetes-map-type: atomic
                                csi:
                                  description: csi (Container Storage Interface) represents ephemeral storage that is handled by certain external CSI drivers.
                                  properties:
                                    driver:
                                      description: |-
                                        driver is the name of the CSI driver that handles this volume.
                                        Consult with your admin for the correct name as registered in the cluster.
                                      type: string
                                    fsType:
                                      description: |-
                                        fsType to mount. Ex. "ext4", "xfs", "ntfs".
                                        If not provided, the empty value is passed to the associated CSI driver
                                        which will determine the default filesystem to apply.
                                      type: string
                                    nodePublishSecretRef:
                                      description: |-
                                        nodePublishSecretRef is a reference to the secret object containing
                                        sensitive information to pass to the CSI driver to complete the CSI
                                        NodePublishVolume and NodeUnpublishVolume calls.
                                        This field is optional, and  may be empty if no secret is required. If the
                                        secret object contains more than one secret, all secret references are passed.
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    readOnly:
                                      description: |-
                                        readOnly specifies a read-only configuration for the volume.
                                        Defaults to false (read/write).
                                      type: boolean
                                    volumeAttributes:
                                      additionalProperties:
                                        type: string
                                      description: |-
                                        volumeAttributes stores driver-specific properties that are passed to the CSI
                                        driver. Consult your driver's documentation for supported values.
                                      type: object
                                  required:
                                    - driver
                                  type: object
                                downwardAPI:
                                  description: downwardAPI represents downward API about the pod that should populate this volume
                                  properties:
                                    defaultMode:
                                      description: |-
                                        Optional: mode bits to use on created files by default. Must be a
                                        Optional: mode bits used to set permissions on created files by default.
                                        Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                        YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                        Defaults to 0644.
                                        Directories within the path are not affected by this setting.
                                        This might be in conflict with other options that affect the file
                                        mode, like fsGroup, and the result can be other mode bits set.
                                      format: int32
                                      type: integer
                                    items:
                                      description: Items is a list of downward API volume file
                                      items:
                                        description: DownwardAPIVolumeFile represents information to create the file containing the pod field
                                        properties:
                                          fieldRef:
                                            description: 'Required: Selects a field of the pod: only annotations, labels, name, namespace and uid are supported.'
                                            properties:
                                              apiVersion:
                                                description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                                type: string
                                              fieldPath:
                                                description: Path of the field to select in the specified API version.
                                                type: string
                                            required:
                                              - fieldPath
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          mode:
                                            description: |-
                                              Optional: mode bits used to set permissions on this file, must be an octal value
                                              between 0000 and 0777 or a decimal value between 0 and 511.
                                              YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                              If not specified, the volume defaultMode will be used.
                                              This might be in conflict with other options that affect the file
                                              mode, like fsGroup, and the result can be other mode bits set.
                                            format: int32
                                            type: integer
                                          path:
                                            description: 'Required: Path is  the relative path name of the file to be created. Must not be absolute or contain the ''..'' path. Must be utf-8 encoded. The first item of the relative path must not start with ''..'''
                                            type: string
                                          resourceFieldRef:
                                            description: |-
                                              Selects a resource of the container: only resources limits and requests
                                              (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.
                                            properties:
                                              containerName:
                                                description: 'Container name: required for volumes, optional for env vars'
                                                type: string
                                              divisor:
                                                anyOf:
                                                  - type: integer
                                                  - type: string
                                                description: Specifies the output format of the exposed resources, defaults to "1"
                                                pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                x-kubernetes-int-or-string: true
                                              resource:
                                                description: 'Required: resource to select'
                                                type: string
                                            required:
                                              - resource
                                            type: object
                                            x-kubernetes-map-type: atomic
                                        required:
                                          - path
                                        type: object
                                      type: array
                                      x-kubernetes-list-type: atomic
                                  type: object
                                emptyDir:
                                  description: |-
                                    emptyDir represents a temporary directory that shares a pod's lifetime.
                                    More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir
                                  properties:
                                    medium:
                                      description: |-
                                        medium represents what type of storage medium should back this directory.
                                        The default is "" which means to use the node's default medium.
                                        Must be an empty string (default) or Memory.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir
                                      type: string
                                    sizeLimit:
                                      anyOf:
                                        - type: integer
                                        - type: string
                                      description: |-
                                        sizeLimit is the total amount of local storage required for this EmptyDir volume.
                                        The size limit is also applicable for memory medium.
                                        The maximum usage on memory medium EmptyDir would be the minimum value between
                                        the SizeLimit specified here and the sum of memory limits of all containers in a pod.
                                        The default is nil which means that the limit is undefined.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir
                                      pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                      x-kubernetes-int-or-string: true
                                  type: object
                                ephemeral:
                                  description: |-
                                    ephemeral represents a volume that is handled by a cluster storage driver.
                                    The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts,
                                    and deleted when the pod is removed.

                                    Use this if:
                                    a) the volume is only needed while the pod runs,
                                    b) features of normal volumes like restoring from snapshot or capacity
                                       tracking are needed,
                                    c) the storage driver is specified through a storage class, and
                                    d) the storage driver supports dynamic volume provisioning through
                                       a PersistentVolumeClaim (see EphemeralVolumeSource for more
                                       information on the connection between this volume type
                                       and PersistentVolumeClaim).

                                    Use PersistentVolumeClaim or one of the vendor-specific
                                    APIs for volumes that persist for longer than the lifecycle
                                    of an individual pod.

                                    Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to
                                    be used that way - see the documentation of the driver for
                                    more information.

                                    A pod can use both types of ephemeral volumes and
                                    persistent volumes at the same time.
                                  properties:
                                    volumeClaimTemplate:
                                      description: |-
                                        Will be used to create a stand-alone PVC to provision the volume.
                                        The pod in which this EphemeralVolumeSource is embedded will be the
                                        owner of the PVC, i.e. the PVC will be deleted together with the
                                        pod.  The name of the PVC will be `<pod name>-<volume name>` where
                                        `<volume name>` is the name from the `PodSpec.Volumes` array
                                        entry. Pod validation will reject the pod if the concatenated name
                                        is not valid for a PVC (for example, too long).

                                        An existing PVC with that name that is not owned by the pod
                                        will *not* be used for the pod to avoid using an unrelated
                                        volume by mistake. Starting the pod is then blocked until
                                        the unrelated PVC is removed. If such a pre-created PVC is
                                        meant to be used by the pod, the PVC has to updated with an
                                        owner reference to the pod once the pod exists. Normally
                                        this should not be necessary, but it may be useful when
                                        manually reconstructing a broken cluster.

                                        This field is read-only and no changes will be made by Kubernetes
                                        to the PVC after it has been created.

                                        Required, must not be nil.
                                      properties:
                                        metadata:
                                          description: |-
                                            May contain labels and annotations that will be copied into the PVC
                                            when creating it. No other fields are allowed and will be rejected during
                                            validation.
                                          type: object
                                        spec:
                                          description: |-
                                            The specification for the PersistentVolumeClaim. The entire content is
                                            copied unchanged into the PVC that gets created from this
                                            template. The same fields as in a PersistentVolumeClaim
                                            are also valid here.
                                          properties:
                                            accessModes:
                                              description: |-
                                                accessModes contains the desired access modes the volume should have.
                                                More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1
                                              items:
                                                type: string
                                              type: array
                                              x-kubernetes-list-type: atomic
                                            dataSource:
                                              description: |-
                                                dataSource field can be used to specify either:
                                                * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot)
                                                * An existing PVC (PersistentVolumeClaim)
                                                If the provisioner or an external controller can support the specified data source,
                                                it will create a new volume based on the contents of the specified data source.
                                                When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef,
                                                and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified.
                                                If the namespace is specified, then dataSourceRef will not be copied to dataSource.
                                              properties:
                                                apiGroup:
                                                  description: |-
                                                    APIGroup is the group for the resource being referenced.
                                                    If APIGroup is not specified, the specified Kind must be in the core API group.
                                                    For any other third-party types, APIGroup is required.
                                                  type: string
                                                kind:
                                                  description: Kind is the type of resource being referenced
                                                  type: string
                                                name:
                                                  description: Name is the name of resource being referenced
                                                  type: string
                                              required:
                                                - kind
                                                - name
                                              type: object
                                              x-kubernetes-map-type: atomic
                                            dataSourceRef:
                                              description: |-
                                                dataSourceRef specifies the object from which to populate the volume with data, if a non-empty
                                                volume is desired. This may be any object from a non-empty API group (non
                                                core object) or a PersistentVolumeClaim object.
                                                When this field is specified, volume binding will only succeed if the type of
                                                the specified object matches some installed volume populator or dynamic
                                                provisioner.
                                                This field will replace the functionality of the dataSource field and as such
                                                if both fields are non-empty, they must have the same value. For backwards
                                                compatibility, when namespace isn't specified in dataSourceRef,
                                                both fields (dataSource and dataSourceRef) will be set to the same
                                                value automatically if one of them is empty and the other is non-empty.
                                                When namespace is specified in dataSourceRef,
                                                dataSource isn't set to the same value and must be empty.
                                                There are three important differences between dataSource and dataSourceRef:
                                                * While dataSource only allows two specific types of objects, dataSourceRef
                                                  allows any non-core object, as well as PersistentVolumeClaim objects.
                                                * While dataSource ignores disallowed values (dropping them), dataSourceRef
                                                  preserves all values, and generates an error if a disallowed value is
                                                  specified.
                                                * While dataSource only allows local objects, dataSourceRef allows objects
                                                  in any namespaces.
                                                (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled.
                                                (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled.
                                              properties:
                                                apiGroup:
                                                  description: |-
                                                    APIGroup is the group for the resource being referenced.
                                                    If APIGroup is not specified, the specified Kind must be in the core API group.
                                                    For any other third-party types, APIGroup is required.
                                                  type: string
                                                kind:
                                                  description: Kind is the type of resource being referenced
                                                  type: string
                                                name:
                                                  description: Name is the name of resource being referenced
                                                  type: string
                                                namespace:
                                                  description: |-
                                                    Namespace is the namespace of resource being referenced
                                                    Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details.
                                                    (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled.
                                                  type: string
                                              required:
                                                - kind
                                                - name
                                              type: object
                                            resources:
                                              description: |-
                                                resources represents the minimum resources the volume should have.
                                                If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements
                                                that are lower than previous value but must still be higher than capacity recorded in the
                                                status field of the claim.
                                                More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources
                                              properties:
                                                limits:
                                                  additionalProperties:
                                                    anyOf:
                                                      - type: integer
                                                      - type: string
                                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                    x-kubernetes-int-or-string: true
                                                  description: |-
                                                    Limits describes the maximum amount of compute resources allowed.
                                                    More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                                  type: object
                                                requests:
                                                  additionalProperties:
                                                    anyOf:
                                                      - type: integer
                                                      - type: string
                                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                    x-kubernetes-int-or-string: true
                                                  description: |-
                                                    Requests describes the minimum amount of compute resources required.
                                                    If Requests is omitted for a container, it defaults to Limits if that is explicitly specified,
                                                    otherwise to an implementation-defined value. Requests cannot exceed Limits.
                                                    More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
                                                  type: object
                                              type: object
                                            selector:
                                              description: selector is a label query over volumes to consider for binding.
                                              properties:
                                                matchExpressions:
                                                  description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                                  items:
                                                    description: |-
                                                      A label selector requirement is a selector that contains values, a key, and an operator that
                                                      relates the key and values.
                                                    properties:
                                                      key:
                                                        description: key is the label key that the selector applies to.
                                                        type: string
                                                      operator:
                                                        description: |-
                                                          operator represents a key's relationship to a set of values.
                                                          Valid operators are In, NotIn, Exists and DoesNotExist.
                                                        type: string
                                                      values:
                                                        description: |-
                                                          values is an array of string values. If the operator is In or NotIn,
                                                          the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                          the values array must be empty. This array is replaced during a strategic
                                                          merge patch.
                                                        items:
                                                          type: string
                                                        type: array
                                                        x-kubernetes-list-type: atomic
                                                    required:
                                                      - key
                                                      - operator
                                                    type: object
                                                  type: array
                                                  x-kubernetes-list-type: atomic
                                                matchLabels:
                                                  additionalProperties:
                                                    type: string
                                                  description: |-
                                                    matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                    map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                    operator is "In", and the values array contains only "value". The requirements are ANDed.
                                                  type: object
                                              type: object
                                              x-kubernetes-map-type: atomic
                                            storageClassName:
                                              description: |-
                                                storageClassName is the name of the StorageClass required by the claim.
                                                More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1
                                              type: string
                                            volumeAttributesClassName:
                                              description: |-
                                                volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim.
                                                If specified, the CSI driver will create or update the volume with the attributes defined
                                                in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName,
                                                it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass
                                                will be applied to the claim but it's not allowed to reset this field to empty string once it is set.
                                                If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass
                                                will be set by the persistentvolume controller if it exists.
                                                If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be
                                                set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource
                                                exists.
                                                More info: https://kubernetes.io/docs/concepts/storage/volume-attributes-classes/
                                                (Beta) Using this field requires the VolumeAttributesClass feature gate to be enabled (off by default).
                                              type: string
                                            volumeMode:
                                              description: |-
                                                volumeMode defines what type of volume is required by the claim.
                                                Value of Filesystem is implied when not included in claim spec.
                                              type: string
                                            volumeName:
                                              description: volumeName is the binding reference to the PersistentVolume backing this claim.
                                              type: string
                                          type: object
                                      required:
                                        - spec
                                      type: object
                                  type: object
                                fc:
                                  description: fc represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod.
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                      type: string
                                    lun:
                                      description: 'lun is Optional: FC target lun number'
                                      format: int32
                                      type: integer
                                    readOnly:
                                      description: |-
                                        readOnly is Optional: Defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                      type: boolean
                                    targetWWNs:
                                      description: 'targetWWNs is Optional: FC target worldwide names (WWNs)'
                                      items:
                                        type: string
                                      type: array
                                      x-kubernetes-list-type: atomic
                                    wwids:
                                      description: |-
                                        wwids Optional: FC volume world wide identifiers (wwids)
                                        Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously.
                                      items:
                                        type: string
                                      type: array
                                      x-kubernetes-list-type: atomic
                                  type: object
                                flexVolume:
                                  description: |-
                                    flexVolume represents a generic volume resource that is
                                    provisioned/attached using an exec based plugin.
                                    Deprecated: FlexVolume is deprecated. Consider using a CSIDriver instead.
                                  properties:
                                    driver:
                                      description: driver is the name of the driver to use for this volume.
                                      type: string
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script.
                                      type: string
                                    options:
                                      additionalProperties:
                                        type: string
                                      description: 'options is Optional: this field holds extra command options if any.'
                                      type: object
                                    readOnly:
                                      description: |-
                                        readOnly is Optional: defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                      type: boolean
                                    secretRef:
                                      description: |-
                                        secretRef is Optional: secretRef is reference to the secret object containing
                                        sensitive information to pass to the plugin scripts. This may be
                                        empty if no secret object is specified. If the secret object
                                        contains more than one secret, all secrets are passed to the plugin
                                        scripts.
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                  required:
                                    - driver
                                  type: object
                                flocker:
                                  description: |-
                                    flocker represents a Flocker volume attached to a kubelet's host machine. This depends on the Flocker control service being running.
                                    Deprecated: Flocker is deprecated and the in-tree flocker type is no longer supported.
                                  properties:
                                    datasetName:
                                      description: |-
                                        datasetName is Name of the dataset stored as metadata -> name on the dataset for Flocker
                                        should be considered as deprecated
                                      type: string
                                    datasetUUID:
                                      description: datasetUUID is the UUID of the dataset. This is unique identifier of a Flocker dataset
                                      type: string
                                  type: object
                                gcePersistentDisk:
                                  description: |-
                                    gcePersistentDisk represents a GCE Disk resource that is attached to a
                                    kubelet's host machine and then exposed to the pod.
                                    Deprecated: GCEPersistentDisk is deprecated. All operations for the in-tree
                                    gcePersistentDisk type are redirected to the pd.csi.storage.gke.io CSI driver.
                                    More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is filesystem type of the volume that you want to mount.
                                        Tip: Ensure that the filesystem type is supported by the host operating system.
                                        Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
                                      type: string
                                    partition:
                                      description: |-
                                        partition is the partition in the volume that you want to mount.
                                        If omitted, the default is to mount by volume name.
                                        Examples: For volume /dev/sda1, you specify the partition as "1".
                                        Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty).
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
                                      format: int32
                                      type: integer
                                    pdName:
                                      description: |-
                                        pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly here will force the ReadOnly setting in VolumeMounts.
                                        Defaults to false.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
                                      type: boolean
                                  required:
                                    - pdName
                                  type: object
                                gitRepo:
                                  description: |-
                                    gitRepo represents a git repository at a particular revision.
                                    Deprecated: GitRepo is deprecated. To provision a container with a git repo, mount an
                                    EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir
                                    into the Pod's container.
                                  properties:
                                    directory:
                                      description: |-
                                        directory is the target directory name.
                                        Must not contain or start with '..'.  If '.' is supplied, the volume directory will be the
                                        git repository.  Otherwise, if specified, the volume will contain the git repository in
                                        the subdirectory with the given name.
                                      type: string
                                    repository:
                                      description: repository is the URL
                                      type: string
                                    revision:
                                      description: revision is the commit hash for the specified revision.
                                      type: string
                                  required:
                                    - repository
                                  type: object
                                glusterfs:
                                  description: |-
                                    glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime.
                                    Deprecated: Glusterfs is deprecated and the in-tree glusterfs type is no longer supported.
                                    More info: https://examples.k8s.io/volumes/glusterfs/README.md
                                  properties:
                                    endpoints:
                                      description: |-
                                        endpoints is the endpoint name that details Glusterfs topology.
                                        More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
                                      type: string
                                    path:
                                      description: |-
                                        path is the Glusterfs volume path.
                                        More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly here will force the Glusterfs volume to be mounted with read-only permissions.
                                        Defaults to false.
                                        More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
                                      type: boolean
                                  required:
                                    - endpoints
                                    - path
                                  type: object
                                hostPath:
                                  description: |-
                                    hostPath represents a pre-existing file or directory on the host
                                    machine that is directly exposed to the container. This is generally
                                    used for system agents or other privileged things that are allowed
                                    to see the host machine. Most containers will NOT need this.
                                    More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
                                  properties:
                                    path:
                                      description: |-
                                        path of the directory on the host.
                                        If the path is a symlink, it will follow the link to the real path.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
                                      type: string
                                    type:
                                      description: |-
                                        type for HostPath Volume
                                        Defaults to ""
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
                                      type: string
                                  required:
                                    - path
                                  type: object
                                image:
                                  description: |-
                                    image represents an OCI object (a container image or artifact) pulled and mounted on the kubelet's host machine.
                                    The volume is resolved at pod startup depending on which PullPolicy value is provided:

                                    - Always: the kubelet always attempts to pull the reference. Container creation will fail If the pull fails.
                                    - Never: the kubelet never pulls the reference and only uses a local image or artifact. Container creation will fail if the reference isn't present.
                                    - IfNotPresent: the kubelet pulls if the reference isn't already present on disk. Container creation will fail if the reference isn't present and the pull fails.

                                    The volume gets re-resolved if the pod gets deleted and recreated, which means that new remote content will become available on pod recreation.
                                    A failure to resolve or pull the image during pod startup will block containers from starting and may add significant latency. Failures will be retried using normal volume backoff and will be reported on the pod reason and message.
                                    The types of objects that may be mounted by this volume are defined by the container runtime implementation on a host machine and at minimum must include all valid types supported by the container image field.
                                    The OCI object gets mounted in a single directory (spec.containers[*].volumeMounts.mountPath) by merging the manifest layers in the same way as for container images.
                                    The volume will be mounted read-only (ro) and non-executable files (noexec).
                                    Sub path mounts for containers are not supported (spec.containers[*].volumeMounts.subpath) before 1.33.
                                    The field spec.securityContext.fsGroupChangePolicy has no effect on this volume type.
                                  properties:
                                    pullPolicy:
                                      description: |-
                                        Policy for pulling OCI objects. Possible values are:
                                        Always: the kubelet always attempts to pull the reference. Container creation will fail If the pull fails.
                                        Never: the kubelet never pulls the reference and only uses a local image or artifact. Container creation will fail if the reference isn't present.
                                        IfNotPresent: the kubelet pulls if the reference isn't already present on disk. Container creation will fail if the reference isn't present and the pull fails.
                                        Defaults to Always if :latest tag is specified, or IfNotPresent otherwise.
                                      type: string
                                    reference:
                                      description: |-
                                        Required: Image or artifact reference to be used.
                                        Behaves in the same way as pod.spec.containers[*].image.
                                        Pull secrets will be assembled in the same way as for the container image by looking up node credentials, SA image pull secrets, and pod spec image pull secrets.
                                        More info: https://kubernetes.io/docs/concepts/containers/images
                                        This field is optional to allow higher level config management to default or override
                                        container images in workload controllers like Deployments and StatefulSets.
                                      type: string
                                  type: object
                                iscsi:
                                  description: |-
                                    iscsi represents an ISCSI Disk resource that is attached to a
                                    kubelet's host machine and then exposed to the pod.
                                    More info: https://examples.k8s.io/volumes/iscsi/README.md
                                  properties:
                                    chapAuthDiscovery:
                                      description: chapAuthDiscovery defines whether support iSCSI Discovery CHAP authentication
                                      type: boolean
                                    chapAuthSession:
                                      description: chapAuthSession defines whether support iSCSI Session CHAP authentication
                                      type: boolean
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type of the volume that you want to mount.
                                        Tip: Ensure that the filesystem type is supported by the host operating system.
                                        Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
                                      type: string
                                    initiatorName:
                                      description: |-
                                        initiatorName is the custom iSCSI Initiator Name.
                                        If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface
                                        <target portal>:<volume name> will be created for the connection.
                                      type: string
                                    iqn:
                                      description: iqn is the target iSCSI Qualified Name.
                                      type: string
                                    iscsiInterface:
                                      default: default
                                      description: |-
                                        iscsiInterface is the interface Name that uses an iSCSI transport.
                                        Defaults to 'default' (tcp).
                                      type: string
                                    lun:
                                      description: lun represents iSCSI Target Lun number.
                                      format: int32
                                      type: integer
                                    portals:
                                      description: |-
                                        portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port
                                        is other than default (typically TCP ports 860 and 3260).
                                      items:
                                        type: string
                                      type: array
                                      x-kubernetes-list-type: atomic
                                    readOnly:
                                      description: |-
                                        readOnly here will force the ReadOnly setting in VolumeMounts.
                                        Defaults to false.
                                      type: boolean
                                    secretRef:
                                      description: secretRef is the CHAP Secret for iSCSI target and initiator authentication
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    targetPortal:
                                      description: |-
                                        targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port
                                        is other than default (typically TCP ports 860 and 3260).
                                      type: string
                                  required:
                                    - iqn
                                    - lun
                                    - targetPortal
                                  type: object
                                name:
                                  description: |-
                                    name of the volume.
                                    Must be a DNS_LABEL and unique within the pod.
                                    More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                  type: string
                                nfs:
                                  description: |-
                                    nfs represents an NFS mount on the host that shares a pod's lifetime
                                    More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
                                  properties:
                                    path:
                                      description: |-
                                        path that is exported by the NFS server.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly here will force the NFS export to be mounted with read-only permissions.
                                        Defaults to false.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
                                      type: boolean
                                    server:
                                      description: |-
                                        server is the hostname or IP address of the NFS server.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
                                      type: string
                                  required:
                                    - path
                                    - server
                                  type: object
                                persistentVolumeClaim:
                                  description: |-
                                    persistentVolumeClaimVolumeSource represents a reference to a
                                    PersistentVolumeClaim in the same namespace.
                                    More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
                                  properties:
                                    claimName:
                                      description: |-
                                        claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume.
                                        More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly Will force the ReadOnly setting in VolumeMounts.
                                        Default false.
                                      type: boolean
                                  required:
                                    - claimName
                                  type: object
                                photonPersistentDisk:
                                  description: |-
                                    photonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine.
                                    Deprecated: PhotonPersistentDisk is deprecated and the in-tree photonPersistentDisk type is no longer supported.
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                      type: string
                                    pdID:
                                      description: pdID is the ID that identifies Photon Controller persistent disk
                                      type: string
                                  required:
                                    - pdID
                                  type: object
                                portworxVolume:
                                  description: |-
                                    portworxVolume represents a portworx volume attached and mounted on kubelets host machine.
                                    Deprecated: PortworxVolume is deprecated. All operations for the in-tree portworxVolume type
                                    are redirected to the pxd.portworx.com CSI driver when the CSIMigrationPortworx feature-gate
                                    is on.
                                  properties:
                                    fsType:
                                      description: |-
                                        fSType represents the filesystem type to mount
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified.
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                      type: boolean
                                    volumeID:
                                      description: volumeID uniquely identifies a Portworx volume
                                      type: string
                                  required:
                                    - volumeID
                                  type: object
                                projected:
                                  description: projected items for all in one resources secrets, configmaps, and downward API
                                  properties:
                                    defaultMode:
                                      description: |-
                                        defaultMode are the mode bits used to set permissions on created files by default.
                                        Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                        YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                        Directories within the path are not affected by this setting.
                                        This might be in conflict with other options that affect the file
                                        mode, like fsGroup, and the result can be other mode bits set.
                                      format: int32
                                      type: integer
                                    sources:
                                      description: |-
                                        sources is the list of volume projections. Each entry in this list
                                        handles one source.
                                      items:
                                        description: |-
                                          Projection that may be projected along with other supported volume types.
                                          Exactly one of these fields must be set.
                                        properties:
                                          clusterTrustBundle:
                                            description: |-
                                              ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field
                                              of ClusterTrustBundle objects in an auto-updating file.

                                              Alpha, gated by the ClusterTrustBundleProjection feature gate.

                                              ClusterTrustBundle objects can either be selected by name, or by the
                                              combination of signer name and a label selector.

                                              Kubelet performs aggressive normalization of the PEM contents written
                                              into the pod filesystem.  Esoteric PEM features such as inter-block
                                              comments and block headers are stripped.  Certificates are deduplicated.
                                              The ordering of certificates within the file is arbitrary, and Kubelet
                                              may change the order over time.
                                            properties:
                                              labelSelector:
                                                description: |-
                                                  Select all ClusterTrustBundles that match this label selector.  Only has
                                                  effect if signerName is set.  Mutually-exclusive with name.  If unset,
                                                  interpreted as "match nothing".  If set but empty, interpreted as "match
                                                  everything".
                                                properties:
                                                  matchExpressions:
                                                    description: matchExpressions is a list of label selector requirements. The requirements are ANDed.
                                                    items:
                                                      description: |-
                                                        A label selector requirement is a selector that contains values, a key, and an operator that
                                                        relates the key and values.
                                                      properties:
                                                        key:
                                                          description: key is the label key that the selector applies to.
                                                          type: string
                                                        operator:
                                                          description: |-
                                                            operator represents a key's relationship to a set of values.
                                                            Valid operators are In, NotIn, Exists and DoesNotExist.
                                                          type: string
                                                        values:
                                                          description: |-
                                                            values is an array of string values. If the operator is In or NotIn,
                                                            the values array must be non-empty. If the operator is Exists or DoesNotExist,
                                                            the values array must be empty. This array is replaced during a strategic
                                                            merge patch.
                                                          items:
                                                            type: string
                                                          type: array
                                                          x-kubernetes-list-type: atomic
                                                      required:
                                                        - key
                                                        - operator
                                                      type: object
                                                    type: array
                                                    x-kubernetes-list-type: atomic
                                                  matchLabels:
                                                    additionalProperties:
                                                      type: string
                                                    description: |-
                                                      matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels
                                                      map is equivalent to an element of matchExpressions, whose key field is "key", the
                                                      operator is "In", and the values array contains only "value". The requirements are ANDed.
                                                    type: object
                                                type: object
                                                x-kubernetes-map-type: atomic
                                              name:
                                                description: |-
                                                  Select a single ClusterTrustBundle by object name.  Mutually-exclusive
                                                  with signerName and labelSelector.
                                                type: string
                                              optional:
                                                description: |-
                                                  If true, don't block pod startup if the referenced ClusterTrustBundle(s)
                                                  aren't available.  If using name, then the named ClusterTrustBundle is
                                                  allowed not to exist.  If using signerName, then the combination of
                                                  signerName and labelSelector is allowed to match zero
                                                  ClusterTrustBundles.
                                                type: boolean
                                              path:
                                                description: Relative path from the volume root to write the bundle.
                                                type: string
                                              signerName:
                                                description: |-
                                                  Select all ClusterTrustBundles that match this signer name.
                                                  Mutually-exclusive with name.  The contents of all selected
                                                  ClusterTrustBundles will be unified and deduplicated.
                                                type: string
                                            required:
                                              - path
                                            type: object
                                          configMap:
                                            description: configMap information about the configMap data to project
                                            properties:
                                              items:
                                                description: |-
                                                  items if unspecified, each key-value pair in the Data field of the referenced
                                                  ConfigMap will be projected into the volume as a file whose name is the
                                                  key and content is the value. If specified, the listed keys will be
                                                  projected into the specified paths, and unlisted keys will not be
                                                  present. If a key is specified which is not present in the ConfigMap,
                                                  the volume setup will error unless it is marked optional. Paths must be
                                                  relative and may not contain the '..' path or start with '..'.
                                                items:
                                                  description: Maps a string key to a path within a volume.
                                                  properties:
                                                    key:
                                                      description: key is the key to project.
                                                      type: string
                                                    mode:
                                                      description: |-
                                                        mode is Optional: mode bits used to set permissions on this file.
                                                        Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                                        YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                                        If not specified, the volume defaultMode will be used.
                                                        This might be in conflict with other options that affect the file
                                                        mode, like fsGroup, and the result can be other mode bits set.
                                                      format: int32
                                                      type: integer
                                                    path:
                                                      description: |-
                                                        path is the relative path of the file to map the key to.
                                                        May not be an absolute path.
                                                        May not contain the path element '..'.
                                                        May not start with the string '..'.
                                                      type: string
                                                  required:
                                                    - key
                                                    - path
                                                  type: object
                                                type: array
                                                x-kubernetes-list-type: atomic
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: optional specify whether the ConfigMap or its keys must be defined
                                                type: boolean
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          downwardAPI:
                                            description: downwardAPI information about the downwardAPI data to project
                                            properties:
                                              items:
                                                description: Items is a list of DownwardAPIVolume file
                                                items:
                                                  description: DownwardAPIVolumeFile represents information to create the file containing the pod field
                                                  properties:
                                                    fieldRef:
                                                      description: 'Required: Selects a field of the pod: only annotations, labels, name, namespace and uid are supported.'
                                                      properties:
                                                        apiVersion:
                                                          description: Version of the schema the FieldPath is written in terms of, defaults to "v1".
                                                          type: string
                                                        fieldPath:
                                                          description: Path of the field to select in the specified API version.
                                                          type: string
                                                      required:
                                                        - fieldPath
                                                      type: object
                                                      x-kubernetes-map-type: atomic
                                                    mode:
                                                      description: |-
                                                        Optional: mode bits used to set permissions on this file, must be an octal value
                                                        between 0000 and 0777 or a decimal value between 0 and 511.
                                                        YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                                        If not specified, the volume defaultMode will be used.
                                                        This might be in conflict with other options that affect the file
                                                        mode, like fsGroup, and the result can be other mode bits set.
                                                      format: int32
                                                      type: integer
                                                    path:
                                                      description: 'Required: Path is  the relative path name of the file to be created. Must not be absolute or contain the ''..'' path. Must be utf-8 encoded. The first item of the relative path must not start with ''..'''
                                                      type: string
                                                    resourceFieldRef:
                                                      description: |-
                                                        Selects a resource of the container: only resources limits and requests
                                                        (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.
                                                      properties:
                                                        containerName:
                                                          description: 'Container name: required for volumes, optional for env vars'
                                                          type: string
                                                        divisor:
                                                          anyOf:
                                                            - type: integer
                                                            - type: string
                                                          description: Specifies the output format of the exposed resources, defaults to "1"
                                                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                          x-kubernetes-int-or-string: true
                                                        resource:
                                                          description: 'Required: resource to select'
                                                          type: string
                                                      required:
                                                        - resource
                                                      type: object
                                                      x-kubernetes-map-type: atomic
                                                  required:
                                                    - path
                                                  type: object
                                                type: array
                                                x-kubernetes-list-type: atomic
                                            type: object
                                          secret:
                                            description: secret information about the secret data to project
                                            properties:
                                              items:
                                                description: |-
                                                  items if unspecified, each key-value pair in the Data field of the referenced
                                                  Secret will be projected into the volume as a file whose name is the
                                                  key and content is the value. If specified, the listed keys will be
                                                  projected into the specified paths, and unlisted keys will not be
                                                  present. If a key is specified which is not present in the Secret,
                                                  the volume setup will error unless it is marked optional. Paths must be
                                                  relative and may not contain the '..' path or start with '..'.
                                                items:
                                                  description: Maps a string key to a path within a volume.
                                                  properties:
                                                    key:
                                                      description: key is the key to project.
                                                      type: string
                                                    mode:
                                                      description: |-
                                                        mode is Optional: mode bits used to set permissions on this file.
                                                        Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                                        YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                                        If not specified, the volume defaultMode will be used.
                                                        This might be in conflict with other options that affect the file
                                                        mode, like fsGroup, and the result can be other mode bits set.
                                                      format: int32
                                                      type: integer
                                                    path:
                                                      description: |-
                                                        path is the relative path of the file to map the key to.
                                                        May not be an absolute path.
                                                        May not contain the path element '..'.
                                                        May not start with the string '..'.
                                                      type: string
                                                  required:
                                                    - key
                                                    - path
                                                  type: object
                                                type: array
                                                x-kubernetes-list-type: atomic
                                              name:
                                                default: ""
                                                description: |-
                                                  Name of the referent.
                                                  This field is effectively required, but due to backwards compatibility is
                                                  allowed to be empty. Instances of this type with an empty value here are
                                                  almost certainly wrong.
                                                  More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                                type: string
                                              optional:
                                                description: optional field specify whether the Secret or its key must be defined
                                                type: boolean
                                            type: object
                                            x-kubernetes-map-type: atomic
                                          serviceAccountToken:
                                            description: serviceAccountToken is information about the serviceAccountToken data to project
                                            properties:
                                              audience:
                                                description: |-
                                                  audience is the intended audience of the token. A recipient of a token
                                                  must identify itself with an identifier specified in the audience of the
                                                  token, and otherwise should reject the token. The audience defaults to the
                                                  identifier of the apiserver.
                                                type: string
                                              expirationSeconds:
                                                description: |-
                                                  expirationSeconds is the requested duration of validity of the service
                                                  account token. As the token approaches expiration, the kubelet volume
                                                  plugin will proactively rotate the service account token. The kubelet will
                                                  start trying to rotate the token if the token is older than 80 percent of
                                                  its time to live or if the token is older than 24 hours.Defaults to 1 hour
                                                  and must be at least 10 minutes.
                                                format: int64
                                                type: integer
                                              path:
                                                description: |-
                                                  path is the path relative to the mount point of the file to project the
                                                  token into.
                                                type: string
                                            required:
                                              - path
                                            type: object
                                        type: object
                                      type: array
                                      x-kubernetes-list-type: atomic
                                  type: object
                                quobyte:
                                  description: |-
                                    quobyte represents a Quobyte mount on the host that shares a pod's lifetime.
                                    Deprecated: Quobyte is deprecated and the in-tree quobyte type is no longer supported.
                                  properties:
                                    group:
                                      description: |-
                                        group to map volume access to
                                        Default is no group
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly here will force the Quobyte volume to be mounted with read-only permissions.
                                        Defaults to false.
                                      type: boolean
                                    registry:
                                      description: |-
                                        registry represents a single or multiple Quobyte Registry services
                                        specified as a string as host:port pair (multiple entries are separated with commas)
                                        which acts as the central registry for volumes
                                      type: string
                                    tenant:
                                      description: |-
                                        tenant owning the given Quobyte volume in the Backend
                                        Used with dynamically provisioned Quobyte volumes, value is set by the plugin
                                      type: string
                                    user:
                                      description: |-
                                        user to map volume access to
                                        Defaults to serivceaccount user
                                      type: string
                                    volume:
                                      description: volume is a string that references an already created Quobyte volume by name.
                                      type: string
                                  required:
                                    - registry
                                    - volume
                                  type: object
                                rbd:
                                  description: |-
                                    rbd represents a Rados Block Device mount on the host that shares a pod's lifetime.
                                    Deprecated: RBD is deprecated and the in-tree rbd type is no longer supported.
                                    More info: https://examples.k8s.io/volumes/rbd/README.md
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type of the volume that you want to mount.
                                        Tip: Ensure that the filesystem type is supported by the host operating system.
                                        Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
                                      type: string
                                    image:
                                      description: |-
                                        image is the rados image name.
                                        More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
                                      type: string
                                    keyring:
                                      default: /etc/ceph/keyring
                                      description: |-
                                        keyring is the path to key ring for RBDUser.
                                        Default is /etc/ceph/keyring.
                                        More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
                                      type: string
                                    monitors:
                                      description: |-
                                        monitors is a collection of Ceph monitors.
                                        More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
                                      items:
                                        type: string
                                      type: array
                                      x-kubernetes-list-type: atomic
                                    pool:
                                      default: rbd
                                      description: |-
                                        pool is the rados pool name.
                                        Default is rbd.
                                        More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly here will force the ReadOnly setting in VolumeMounts.
                                        Defaults to false.
                                        More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
                                      type: boolean
                                    secretRef:
                                      description: |-
                                        secretRef is name of the authentication secret for RBDUser. If provided
                                        overrides keyring.
                                        Default is nil.
                                        More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    user:
                                      default: admin
                                      description: |-
                                        user is the rados user name.
                                        Default is admin.
                                        More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
                                      type: string
                                  required:
                                    - image
                                    - monitors
                                  type: object
                                scaleIO:
                                  description: |-
                                    scaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes.
                                    Deprecated: ScaleIO is deprecated and the in-tree scaleIO type is no longer supported.
                                  properties:
                                    fsType:
                                      default: xfs
                                      description: |-
                                        fsType is the filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs", "ntfs".
                                        Default is "xfs".
                                      type: string
                                    gateway:
                                      description: gateway is the host address of the ScaleIO API Gateway.
                                      type: string
                                    protectionDomain:
                                      description: protectionDomain is the name of the ScaleIO Protection Domain for the configured storage.
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly Defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                      type: boolean
                                    secretRef:
                                      description: |-
                                        secretRef references to the secret for ScaleIO user and other
                                        sensitive information. If this is not provided, Login operation will fail.
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    sslEnabled:
                                      description: sslEnabled Flag enable/disable SSL communication with Gateway, default false
                                      type: boolean
                                    storageMode:
                                      default: ThinProvisioned
                                      description: |-
                                        storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned.
                                        Default is ThinProvisioned.
                                      type: string
                                    storagePool:
                                      description: storagePool is the ScaleIO Storage Pool associated with the protection domain.
                                      type: string
                                    system:
                                      description: system is the name of the storage system as configured in ScaleIO.
                                      type: string
                                    volumeName:
                                      description: |-
                                        volumeName is the name of a volume already created in the ScaleIO system
                                        that is associated with this volume source.
                                      type: string
                                  required:
                                    - gateway
                                    - secretRef
                                    - system
                                  type: object
                                secret:
                                  description: |-
                                    secret represents a secret that should populate this volume.
                                    More info: https://kubernetes.io/docs/concepts/storage/volumes#secret
                                  properties:
                                    defaultMode:
                                      description: |-
                                        defaultMode is Optional: mode bits used to set permissions on created files by default.
                                        Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                        YAML accepts both octal and decimal values, JSON requires decimal values
                                        for mode bits. Defaults to 0644.
                                        Directories within the path are not affected by this setting.
                                        This might be in conflict with other options that affect the file
                                        mode, like fsGroup, and the result can be other mode bits set.
                                      format: int32
                                      type: integer
                                    items:
                                      description: |-
                                        items If unspecified, each key-value pair in the Data field of the referenced
                                        Secret will be projected into the volume as a file whose name is the
                                        key and content is the value. If specified, the listed keys will be
                                        projected into the specified paths, and unlisted keys will not be
                                        present. If a key is specified which is not present in the Secret,
                                        the volume setup will error unless it is marked optional. Paths must be
                                        relative and may not contain the '..' path or start with '..'.
                                      items:
                                        description: Maps a string key to a path within a volume.
                                        properties:
                                          key:
                                            description: key is the key to project.
                                            type: string
                                          mode:
                                            description: |-
                                              mode is Optional: mode bits used to set permissions on this file.
                                              Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.
                                              YAML accepts both octal and decimal values, JSON requires decimal values for mode bits.
                                              If not specified, the volume defaultMode will be used.
                                              This might be in conflict with other options that affect the file
                                              mode, like fsGroup, and the result can be other mode bits set.
                                            format: int32
                                            type: integer
                                          path:
                                            description: |-
                                              path is the relative path of the file to map the key to.
                                              May not be an absolute path.
                                              May not contain the path element '..'.
                                              May not start with the string '..'.
                                            type: string
                                        required:
                                          - key
                                          - path
                                        type: object
                                      type: array
                                      x-kubernetes-list-type: atomic
                                    optional:
                                      description: optional field specify whether the Secret or its keys must be defined
                                      type: boolean
                                    secretName:
                                      description: |-
                                        secretName is the name of the secret in the pod's namespace to use.
                                        More info: https://kubernetes.io/docs/concepts/storage/volumes#secret
                                      type: string
                                  type: object
                                storageos:
                                  description: |-
                                    storageOS represents a StorageOS volume attached and mounted on Kubernetes nodes.
                                    Deprecated: StorageOS is deprecated and the in-tree storageos type is no longer supported.
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is the filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                      type: string
                                    readOnly:
                                      description: |-
                                        readOnly defaults to false (read/write). ReadOnly here will force
                                        the ReadOnly setting in VolumeMounts.
                                      type: boolean
                                    secretRef:
                                      description: |-
                                        secretRef specifies the secret to use for obtaining the StorageOS API
                                        credentials.  If not specified, default values will be attempted.
                                      properties:
                                        name:
                                          default: ""
                                          description: |-
                                            Name of the referent.
                                            This field is effectively required, but due to backwards compatibility is
                                            allowed to be empty. Instances of this type with an empty value here are
                                            almost certainly wrong.
                                            More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          type: string
                                      type: object
                                      x-kubernetes-map-type: atomic
                                    volumeName:
                                      description: |-
                                        volumeName is the human-readable name of the StorageOS volume.  Volume
                                        names are only unique within a namespace.
                                      type: string
                                    volumeNamespace:
                                      description: |-
                                        volumeNamespace specifies the scope of the volume within StorageOS.  If no
                                        namespace is specified then the Pod's namespace will be used.  This allows the
                                        Kubernetes name scoping to be mirrored within StorageOS for tighter integration.
                                        Set VolumeName to any name to override the default behaviour.
                                        Set to "default" if you are not using namespaces within StorageOS.
                                        Namespaces that do not pre-exist within StorageOS will be created.
                                      type: string
                                  type: object
                                vsphereVolume:
                                  description: |-
                                    vsphereVolume represents a vSphere volume attached and mounted on kubelets host machine.
                                    Deprecated: VsphereVolume is deprecated. All operations for the in-tree vsphereVolume type
                                    are redirected to the csi.vsphere.vmware.com CSI driver.
                                  properties:
                                    fsType:
                                      description: |-
                                        fsType is filesystem type to mount.
                                        Must be a filesystem type supported by the host operating system.
                                        Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
                                      type: string
                                    storagePolicyID:
                                      description: storagePolicyID is the storage Policy Based Management (SPBM) profile ID associated with the StoragePolicyName.
                                      type: string
                                    storagePolicyName:
                                      description: storagePolicyName is the storage Policy Based Management (SPBM) profile name.
                                      type: string
                                    volumePath:
                                      description: volumePath is the path that identifies vSphere volume vmdk
                                      type: string
                                  required:
                                    - volumePath
                                  type: object
                              required:
                                - name
                              type: object
                            type: array
                            x-kubernetes-list-map-keys:
                              - name
                            x-kubernetes-list-type: map
                        required: []
                        type: object
                      ingress:
                        description: Ingress config to expose the component outside the cluster (or through a service mesh).
                        properties:
                          annotations:
                            additionalProperties:
                              type: string
                            description: Annotations to set on the generated Ingress/VirtualService resources.
                            type: object
                          enabled:
                            description: Enabled exposes the component through an ingress or virtual service when true.
                            type: boolean
                          host:
                            description: Host is the base host name to route external traffic to this component.
                            type: string
                          hostPrefix:
                            description: HostPrefix is an optional prefix added before the host.
                            type: string
                          hostSuffix:
                            description: HostSuffix is an optional suffix appended after the host.
                            type: string
                          ingressControllerClassName:
                            description: IngressControllerClassName selects the ingress controller class (e.g., "nginx").
                            type: string
                          labels:
                            additionalProperties:
                              type: string
                            description: Labels to set on the generated Ingress/VirtualService resources.
                            type: object
                          tls:
                            description: TLS holds the TLS configuration used by the Ingress/VirtualService.
                            properties:
                              secretName:
                                description: SecretName is the name of a Kubernetes Secret containing the TLS certificate and key.
                                type: string
                            type: object
                          useVirtualService:
                            description: UseVirtualService indicates whether to configure a service-mesh VirtualService instead of a standard Ingress.
                            type: boolean
                          virtualServiceGateway:
                            description: VirtualServiceGateway optionally specifies the gateway name to attach the VirtualService to.
                            type: string
                        type: object
                      labels:
                        additionalProperties:
                          type: string
                        description: Labels to add to generated Kubernetes resources for this component.
                        type: object
                      livenessProbe:
                        description: LivenessProbe to detect and restart unhealthy containers.
                        properties:
                          exec:
                            description: Exec specifies a command to execute in the container.
                            properties:
                              command:
                                description: |-
                                  Command is the command line to execute inside the container, the working directory for the
                                  command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                  not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                  a shell, you need to explicitly call out to that shell.
                                  Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                items:
                                  type: string
                                type: array
                                x-kubernetes-list-type: atomic
                            type: object
                          failureThreshold:
                            description: |-
                              Minimum consecutive failures for the probe to be considered failed after having succeeded.
                              Defaults to 3. Minimum value is 1.
                            format: int32
                            type: integer
                          grpc:
                            description: GRPC specifies a GRPC HealthCheckRequest.
                            properties:
                              port:
                                description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                format: int32
                                type: integer
                              service:
                                default: ""
                                description: |-
                                  Service is the name of the service to place in the gRPC HealthCheckRequest
                                  (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                  If this is not specified, the default behavior is defined by gRPC.
                                type: string
                            required:
                              - port
                            type: object
                          httpGet:
                            description: HTTPGet specifies an HTTP GET request to perform.
                            properties:
                              host:
                                description: |-
                                  Host name to connect to, defaults to the pod IP. You probably want to set
                                  "Host" in httpHeaders instead.
                                type: string
                              httpHeaders:
                                description: Custom headers to set in the request. HTTP allows repeated headers.
                                items:
                                  description: HTTPHeader describes a custom header to be used in HTTP probes
                                  properties:
                                    name:
                                      description: |-
                                        The header field name.
                                        This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                      type: string
                                    value:
                                      description: The header field value
                                      type: string
                                  required:
                                    - name
                                    - value
                                  type: object
                                type: array
                                x-kubernetes-list-type: atomic
                              path:
                                description: Path to access on the HTTP server.
                                type: string
                              port:
                                anyOf:
                                  - type: integer
                                  - type: string
                                description: |-
                                  Name or number of the port to access on the container.
                                  Number must be in the range 1 to 65535.
                                  Name must be an IANA_SVC_NAME.
                                x-kubernetes-int-or-string: true
                              scheme:
                                description: |-
                                  Scheme to use for connecting to the host.
                                  Defaults to HTTP.
                                type: string
                            required:
                              - port
                            type: object
                          initialDelaySeconds:
                            description: |-
                              Number of seconds after the container has started before liveness probes are initiated.
                              More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                            format: int32
                            type: integer
                          periodSeconds:
                            description: |-
                              How often (in seconds) to perform the probe.
                              Default to 10 seconds. Minimum value is 1.
                            format: int32
                            type: integer
                          successThreshold:
                            description: |-
                              Minimum consecutive successes for the probe to be considered successful after having failed.
                              Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                            format: int32
                            type: integer
                          tcpSocket:
                            description: TCPSocket specifies a connection to a TCP port.
                            properties:
                              host:
                                description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                type: string
                              port:
                                anyOf:
                                  - type: integer
                                  - type: string
                                description: |-
                                  Number or name of the port to access on the container.
                                  Number must be in the range 1 to 65535.
                                  Name must be an IANA_SVC_NAME.
                                x-kubernetes-int-or-string: true
                            required:
                              - port
                            type: object
                          terminationGracePeriodSeconds:
                            description: |-
                              Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                              The grace period is the duration in seconds after the processes running in the pod are sent
                              a termination signal and the time when the processes are forcibly halted with a kill signal.
                              Set this value longer than the expected cleanup time for your process.
                              If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                              value overrides the value provided by the pod spec.
                              Value must be non-negative integer. The value zero indicates stop immediately via
                              the kill signal (no opportunity to shut down).
                              This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                              Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                            format: int64
                            type: integer
                          timeoutSeconds:
                            description: |-
                              Number of seconds after which the probe times out.
                              Defaults to 1 second. Minimum value is 1.
                              More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                            format: int32
                            type: integer
                        type: object
                      multinode:
                        description: Multinode is the configuration for multinode components.
                        properties:
                          nodeCount:
                            default: 2
                            description: |-
                              Indicates the number of nodes to deploy for multinode components.
                              Total number of GPUs is NumberOfNodes * GPU limit.
                              Must be greater than 1.
                            format: int32
                            minimum: 2
                            type: integer
                        required:
                          - nodeCount
                        type: object
                      readinessProbe:
                        description: ReadinessProbe to signal when the container is ready to receive traffic.
                        properties:
                          exec:
                            description: Exec specifies a command to execute in the container.
                            properties:
                              command:
                                description: |-
                                  Command is the command line to execute inside the container, the working directory for the
                                  command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                  not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                  a shell, you need to explicitly call out to that shell.
                                  Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                items:
                                  type: string
                                type: array
                                x-kubernetes-list-type: atomic
                            type: object
                          failureThreshold:
                            description: |-
                              Minimum consecutive failures for the probe to be considered failed after having succeeded.
                              Defaults to 3. Minimum value is 1.
                            format: int32
                            type: integer
                          grpc:
                            description: GRPC specifies a GRPC HealthCheckRequest.
                            properties:
                              port:
                                description: Port number of the gRPC service. Number must be in the range 1 to 65535.
                                format: int32
                                type: integer
                              service:
                                default: ""
                                description: |-
                                  Service is the name of the service to place in the gRPC HealthCheckRequest
                                  (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

                                  If this is not specified, the default behavior is defined by gRPC.
                                type: string
                            required:
                              - port
                            type: object
                          httpGet:
                            description: HTTPGet specifies an HTTP GET request to perform.
                            properties:
                              host:
                                description: |-
                                  Host name to connect to, defaults to the pod IP. You probably want to set
                                  "Host" in httpHeaders instead.
                                type: string
                              httpHeaders:
                                description: Custom headers to set in the request. HTTP allows repeated headers.
                                items:
                                  description: HTTPHeader describes a custom header to be used in HTTP probes
                                  properties:
                                    name:
                                      description: |-
                                        The header field name.
                                        This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                      type: string
                                    value:
                                      description: The header field value
                                      type: string
                                  required:
                                    - name
                                    - value
                                  type: object
                                type: array
                                x-kubernetes-list-type: atomic
                              path:
                                description: Path to access on the HTTP server.
                                type: string
                              port:
                                anyOf:
                                  - type: integer
                                  - type: string
                                description: |-
                                  Name or number of the port to access on the container.
                                  Number must be in the range 1 to 65535.
                                  Name must be an IANA_SVC_NAME.
                                x-kubernetes-int-or-string: true
                              scheme:
                                description: |-
                                  Scheme to use for connecting to the host.
                                  Defaults to HTTP.
                                type: string
                            required:
                              - port
                            type: object
                          initialDelaySeconds:
                            description: |-
                              Number of seconds after the container has started before liveness probes are initiated.
                              More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                            format: int32
                            type: integer
                          periodSeconds:
                            description: |-
                              How often (in seconds) to perform the probe.
                              Default to 10 seconds. Minimum value is 1.
                            format: int32
                            type: integer
                          successThreshold:
                            description: |-
                              Minimum consecutive successes for the probe to be considered successful after having failed.
                              Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
                            format: int32
                            type: integer
                          tcpSocket:
                            description: TCPSocket specifies a connection to a TCP port.
                            properties:
                              host:
                                description: 'Optional: Host name to connect to, defaults to the pod IP.'
                                type: string
                              port:
                                anyOf:
                                  - type: integer
                                  - type: string
                                description: |-
                                  Number or name of the port to access on the container.
                                  Number must be in the range 1 to 65535.
                                  Name must be an IANA_SVC_NAME.
                                x-kubernetes-int-or-string: true
                            required:
                              - port
                            type: object
                          terminationGracePeriodSeconds:
                            description: |-
                              Optional duration in seconds the pod needs to terminate gracefully upon probe failure.
                              The grace period is the duration in seconds after the processes running in the pod are sent
                              a termination signal and the time when the processes are forcibly halted with a kill signal.
                              Set this value longer than the expected cleanup time for your process.
                              If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this
                              value overrides the value provided by the pod spec.
                              Value must be non-negative integer. The value zero indicates stop immediately via
                              the kill signal (no opportunity to shut down).
                              This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate.
                              Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
                            format: int64
                            type: integer
                          timeoutSeconds:
                            description: |-
                              Number of seconds after which the probe times out.
                              Defaults to 1 second. Minimum value is 1.
                              More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                            format: int32
                            type: integer
                        type: object
                      replicas:
                        description: Replicas is the desired number of Pods for this component when autoscaling is not used.
                        format: int32
                        type: integer
                      resources:
                        description: |-
                          Resources requested and limits for this component, including CPU, memory,
                          GPUs/devices, and any runtime-specific resources.
                        properties:
                          limits:
                            properties:
                              cpu:
                                type: string
                              custom:
                                additionalProperties:
                                  type: string
                                type: object
                              gpu:
                                description: |-
                                  Indicates the number of GPUs to request.
                                  total number of GPUs is NumberOfNodes * GPU in case of multinode deployment.
                                type: string
                              memory:
                                type: string
                            type: object
                          requests:
                            properties:
                              cpu:
                                type: string
                              custom:
                                additionalProperties:
                                  type: string
                                type: object
                              gpu:
                                description: |-
                                  Indicates the number of GPUs to request.
                                  total number of GPUs is NumberOfNodes * GPU in case of multinode deployment.
                                type: string
                              memory:
                                type: string
                            type: object
                        type: object
                      serviceName:
                        description: The name of the component
                        type: string
                      sharedMemory:
                        description: SharedMemory controls the tmpfs mounted at /dev/shm (enable/disable and size).
                        properties:
                          disabled:
                            type: boolean
                          size:
                            anyOf:
                              - type: integer
                              - type: string
                            pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                            x-kubernetes-int-or-string: true
                        type: object
                      subComponentType:
                        description: SubComponentType indicates the sub-role of this component (for example, "prefill").
                        type: string
                      volumeMounts:
                        description: VolumeMounts references PVCs defined at the top level for volumes to be mounted by the component.
                        items:
                          description: VolumeMount references a PVC defined at the top level for volumes to be mounted by the component
                          properties:
                            mountPoint:
                              description: |-
                                MountPoint specifies where to mount the volume.
                                If useAsCompilationCache is true and mountPoint is not specified,
                                a backend-specific default will be used.
                              type: string
                            name:
                              description: Name references a PVC name defined in the top-level PVCs map
                              type: string
                            useAsCompilationCache:
                              default: false
                              description: |-
                                UseAsCompilationCache indicates this volume should be used as a compilation cache.
                                When true, backend-specific environment variables will be set and default mount points may be used.
                              type: boolean
                          required:
                            - name
                          type: object
                        type: array
                    type: object
                  description: |-
                    Services allows per-service overrides of the component deployment settings.
                    - key: name of the service defined by the DynamoComponent
                    - value: overrides for that service
                    If not set for a service, the default DynamoComponentDeployment values are used.
                  type: object
              type: object
            status:
              description: Status reflects the current observed state of this graph deployment.
              properties:
                conditions:
                  description: |-
                    Conditions contains the latest observed conditions of the graph deployment.
                    The slice is merged by type on patch updates.
                  items:
                    description: Condition contains details for one aspect of the current state of this API Resource.
                    properties:
                      lastTransitionTime:
                        description: |-
                          lastTransitionTime is the last time the condition transitioned from one status to another.
                          This should be when the underlying condition changed.  If that is not known, then using the time when the API field changed is acceptable.
                        format: date-time
                        type: string
                      message:
                        description: |-
                          message is a human readable message indicating details about the transition.
                          This may be an empty string.
                        maxLength: 32768
                        type: string
                      observedGeneration:
                        description: |-
                          observedGeneration represents the .metadata.generation that the condition was set based upon.
                          For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date
                          with respect to the current state of the instance.
                        format: int64
                        minimum: 0
                        type: integer
                      reason:
                        description: |-
                          reason contains a programmatic identifier indicating the reason for the condition's last transition.
                          Producers of specific condition types may define expected values and meanings for this field,
                          and whether the values are considered a guaranteed API.
                          The value should be a CamelCase string.
                          This field may not be empty.
                        maxLength: 1024
                        minLength: 1
                        pattern: ^[A-Za-z]([A-Za-z0-9_,:]*[A-Za-z0-9_])?$
                        type: string
                      status:
                        description: status of the condition, one of True, False, Unknown.
                        enum:
                          - "True"
                          - "False"
                          - Unknown
                        type: string
                      type:
                        description: type of condition in CamelCase or in foo.example.com/CamelCase.
                        maxLength: 316
                        pattern: ^([a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*/)?(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9])$
                        type: string
                    required:
                      - lastTransitionTime
                      - message
                      - reason
                      - status
                      - type
                    type: object
                  type: array
                state:
                  description: State is a high-level textual status of the graph deployment lifecycle.
                  type: string
              type: object
          type: object
      served: true
      storage: true
      subresources:
        status: {}
