# # This is a CMake makefile. You can find the cmake utility and # information about it at http://www.cmake.org # cmake_minimum_required(VERSION 2.8.12) project(dlib) # Adhere to GNU filesystem layout conventions include(GNUInstallDirs) # default to a Release build (except if CMAKE_BUILD_TYPE is set) include(cmake_utils/release_build_by_default) include(cmake_utils/use_cpp_11.cmake) set(CPACK_PACKAGE_VERSION_MAJOR "19") set(CPACK_PACKAGE_VERSION_MINOR "7") set(CPACK_PACKAGE_VERSION_PATCH "99") set(VERSION ${CPACK_PACKAGE_VERSION_MAJOR}.${CPACK_PACKAGE_VERSION_MINOR}.${CPACK_PACKAGE_VERSION_PATCH}) # Set DLIB_VERSION in the including CMake file so they can use it to do whatever they want. get_directory_property(has_parent PARENT_DIRECTORY) if(has_parent) set(DLIB_VERSION ${VERSION} PARENT_SCOPE) endif() # Set only because there are old target_link_libraries() statements in the # FindCUDA.cmake file that comes with CMake that error out if the new behavior # is used. cmake_policy(SET CMP0023 OLD) macro (enable_preprocessor_switch option_name) list(APPEND active_preprocessor_switches "-D${option_name}") endmacro() macro (disable_preprocessor_switch option_name) if (active_preprocessor_switches) list(REMOVE_ITEM active_preprocessor_switches "-D${option_name}") endif() endmacro() macro (toggle_preprocessor_switch option_name) if (${option_name}) enable_preprocessor_switch(${option_name}) else() disable_preprocessor_switch(${option_name}) endif() endmacro() # Suppress superfluous randlib warnings about libdlib.a having no symbols on MacOSX. if (APPLE) set(CMAKE_C_ARCHIVE_CREATE " Scr ") set(CMAKE_CXX_ARCHIVE_CREATE " Scr ") set(CMAKE_C_ARCHIVE_FINISH " -no_warning_for_no_symbols -c ") set(CMAKE_CXX_ARCHIVE_FINISH " -no_warning_for_no_symbols -c ") endif() # Don't try to call add_library(dlib) and setup dlib's stuff if it has already # been done by some other part of the current cmake project. We do this # because it avoids getting warnings/errors about cmake policy CMP0002. This # happens when a project tries to call add_subdirectory() on dlib more than # once. This most often happens when the top level of a project depends on two # or more other things which both depend on dlib. if (NOT TARGET dlib) set (DLIB_ISO_CPP_ONLY_STR "Enable this if you don't want to compile any non-ISO C++ code (i.e. you don't use any of the API Wrappers)" ) set (DLIB_NO_GUI_SUPPORT_STR "Enable this if you don't want to compile any of the dlib GUI code" ) set (DLIB_ENABLE_STACK_TRACE_STR "Enable this if you want to turn on the DLIB_STACK_TRACE macros" ) set (DLIB_USE_BLAS_STR "Disable this if you don't want to use a BLAS library" ) set (DLIB_USE_LAPACK_STR "Disable this if you don't want to use a LAPACK library" ) set (DLIB_USE_CUDA_STR "Disable this if you don't want to use NVIDIA CUDA" ) set (DLIB_PNG_SUPPORT_STR "Disable this if you don't want to link against libpng" ) set (DLIB_GIF_SUPPORT_STR "Disable this if you don't want to link against libgif" ) set (DLIB_JPEG_SUPPORT_STR "Disable this if you don't want to link against libjpeg" ) set (DLIB_LINK_WITH_SQLITE3_STR "Disable this if you don't want to link against sqlite3" ) #set (DLIB_USE_FFTW_STR "Disable this if you don't want to link against fftw" ) set (DLIB_USE_MKL_FFT_STR "Disable this is you don't want to use the MKL DFTI FFT implementation" ) set (DLIB_ENABLE_ASSERTS_STR "Enable this if you want to turn on the DLIB_ASSERT macro" ) option(DLIB_ENABLE_ASSERTS ${DLIB_ENABLE_ASSERTS_STR} OFF) option(DLIB_ISO_CPP_ONLY ${DLIB_ISO_CPP_ONLY_STR} OFF) toggle_preprocessor_switch(DLIB_ISO_CPP_ONLY) option(DLIB_NO_GUI_SUPPORT ${DLIB_NO_GUI_SUPPORT_STR} OFF) toggle_preprocessor_switch(DLIB_NO_GUI_SUPPORT) option(DLIB_ENABLE_STACK_TRACE ${DLIB_ENABLE_STACK_TRACE_STR} OFF) toggle_preprocessor_switch(DLIB_ENABLE_STACK_TRACE) if(DLIB_ENABLE_ASSERTS) # Set these variables so they are set in the config.h.in file when dlib # is installed. set (DLIB_DISABLE_ASSERTS false) set (ENABLE_ASSERTS true) enable_preprocessor_switch(ENABLE_ASSERTS) disable_preprocessor_switch(DLIB_DISABLE_ASSERTS) else() # Set these variables so they are set in the config.h.in file when dlib # is installed. set (DLIB_DISABLE_ASSERTS true) set (ENABLE_ASSERTS false) disable_preprocessor_switch(ENABLE_ASSERTS) # Never force the asserts off when doing an in project build. The only # time this matters is when using visual studio. The visual studio IDE # has a drop down that lets the user select either release or debug # builds. The DLIB_ASSERT macro is setup to enable/disable automatically # based on this drop down (via preprocessor magic). However, if # DLIB_DISABLE_ASSERTS is defined it permanently disables asserts no # matter what, which would defeat the visual studio drop down. So here # we make a point to not do that kind of severe disabling when in a # project build. It should also be pointed out that DLIB_DISABLE_ASSERTS # is only needed when building and installing dlib as a separately # installed library. It doesn't matter when doing an in project build. if (NOT DLIB_IN_PROJECT_BUILD) enable_preprocessor_switch(DLIB_DISABLE_ASSERTS) endif() endif() if (DLIB_ISO_CPP_ONLY) option(DLIB_JPEG_SUPPORT ${DLIB_JPEG_SUPPORT_STR} OFF) option(DLIB_LINK_WITH_SQLITE3 ${DLIB_LINK_WITH_SQLITE3_STR} OFF) option(DLIB_USE_BLAS ${DLIB_USE_BLAS_STR} OFF) option(DLIB_USE_LAPACK ${DLIB_USE_LAPACK_STR} OFF) option(DLIB_USE_CUDA ${DLIB_USE_CUDA_STR} OFF) option(DLIB_PNG_SUPPORT ${DLIB_PNG_SUPPORT_STR} OFF) option(DLIB_GIF_SUPPORT ${DLIB_GIF_SUPPORT_STR} OFF) #option(DLIB_USE_FFTW ${DLIB_USE_FFTW_STR} OFF) option(DLIB_USE_MKL_FFT ${DLIB_USE_MKL_FFT_STR} OFF) else() option(DLIB_JPEG_SUPPORT ${DLIB_JPEG_SUPPORT_STR} ON) option(DLIB_LINK_WITH_SQLITE3 ${DLIB_LINK_WITH_SQLITE3_STR} ON) option(DLIB_USE_BLAS ${DLIB_USE_BLAS_STR} ON) option(DLIB_USE_LAPACK ${DLIB_USE_LAPACK_STR} ON) option(DLIB_USE_CUDA ${DLIB_USE_CUDA_STR} ON) option(DLIB_PNG_SUPPORT ${DLIB_PNG_SUPPORT_STR} ON) option(DLIB_GIF_SUPPORT ${DLIB_GIF_SUPPORT_STR} ON) #option(DLIB_USE_FFTW ${DLIB_USE_FFTW_STR} ON) option(DLIB_USE_MKL_FFT ${DLIB_USE_MKL_FFT_STR} ON) endif() toggle_preprocessor_switch(DLIB_JPEG_SUPPORT) toggle_preprocessor_switch(DLIB_USE_BLAS) toggle_preprocessor_switch(DLIB_USE_LAPACK) toggle_preprocessor_switch(DLIB_USE_CUDA) toggle_preprocessor_switch(DLIB_PNG_SUPPORT) toggle_preprocessor_switch(DLIB_GIF_SUPPORT) #toggle_preprocessor_switch(DLIB_USE_FFTW) toggle_preprocessor_switch(DLIB_USE_MKL_FFT) set(source_files base64/base64_kernel_1.cpp bigint/bigint_kernel_1.cpp bigint/bigint_kernel_2.cpp bit_stream/bit_stream_kernel_1.cpp entropy_decoder/entropy_decoder_kernel_1.cpp entropy_decoder/entropy_decoder_kernel_2.cpp entropy_encoder/entropy_encoder_kernel_1.cpp entropy_encoder/entropy_encoder_kernel_2.cpp md5/md5_kernel_1.cpp tokenizer/tokenizer_kernel_1.cpp unicode/unicode.cpp data_io/image_dataset_metadata.cpp data_io/mnist.cpp dnn/cpu_dlib.cpp dnn/tensor_tools.cpp ) set(dlib_needed_libraries) set(dlib_needed_includes) if (DLIB_ISO_CPP_ONLY) add_library(dlib STATIC ${source_files} ) if (UNIX AND NOT DLIB_IN_PROJECT_BUILD) add_library(dlib_shared SHARED ${source_files} ) add_dependencies(dlib_shared dlib) endif() else() set(source_files ${source_files} sockets/sockets_kernel_1.cpp bsp/bsp.cpp dir_nav/dir_nav_kernel_1.cpp dir_nav/dir_nav_kernel_2.cpp dir_nav/dir_nav_extensions.cpp linker/linker_kernel_1.cpp logger/extra_logger_headers.cpp logger/logger_kernel_1.cpp logger/logger_config_file.cpp misc_api/misc_api_kernel_1.cpp misc_api/misc_api_kernel_2.cpp sockets/sockets_extensions.cpp sockets/sockets_kernel_2.cpp sockstreambuf/sockstreambuf.cpp sockstreambuf/sockstreambuf_unbuffered.cpp server/server_kernel.cpp server/server_iostream.cpp server/server_http.cpp threads/multithreaded_object_extension.cpp threads/threaded_object_extension.cpp threads/threads_kernel_1.cpp threads/threads_kernel_2.cpp threads/threads_kernel_shared.cpp threads/thread_pool_extension.cpp threads/async.cpp timer/timer.cpp stack_trace.cpp ) if(UNIX) set(CMAKE_THREAD_PREFER_PTHREAD ON) find_package(Threads REQUIRED) set(dlib_needed_libraries ${dlib_needed_libraries} ${CMAKE_THREAD_LIBS_INIT}) endif() # we want to link to the right stuff depending on our platform. if (WIN32 AND NOT CYGWIN) ############################################################################### if (DLIB_NO_GUI_SUPPORT) set (dlib_needed_libraries ws2_32 winmm) else() set (dlib_needed_libraries ws2_32 winmm comctl32 gdi32 imm32) endif() elseif(APPLE) ############################################################################ set(CMAKE_MACOSX_RPATH 1) if (NOT DLIB_NO_GUI_SUPPORT) find_package(X11 QUIET) if (X11_FOUND) # If both X11 and anaconda are installed, it's possible for the # anaconda path to appear before /opt/X11, so we remove anaconda. foreach (ITR ${X11_INCLUDE_DIR}) if ("${ITR}" MATCHES "(.*)(ana|mini)conda(.*)") list (REMOVE_ITEM X11_INCLUDE_DIR ${ITR}) endif () endforeach(ITR) include_directories(${X11_INCLUDE_DIR}) set (dlib_needed_libraries ${dlib_needed_libraries} ${X11_LIBRARIES}) else() find_library(xlib X11) # Make sure X11 is in the include path. Note that we look for # Xlocale.h rather than Xlib.h because it avoids finding a partial # copy of the X11 headers on systems with anaconda installed. find_path(xlib_path Xlocale.h PATHS /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6/include /opt/local/include PATH_SUFFIXES X11 ) if (xlib AND xlib_path) get_filename_component(x11_path ${xlib_path} PATH CACHE) include_directories(${x11_path}) set(dlib_needed_libraries ${dlib_needed_libraries} ${xlib} ) set(X11_FOUND 1) endif() endif() if (NOT X11_FOUND) message(" *****************************************************************************") message(" *** DLIB GUI SUPPORT DISABLED BECAUSE X11 DEVELOPMENT LIBRARIES NOT FOUND ***") message(" *** Make sure XQuartz is installed if you want GUI support. ***") message(" *** You can download XQuartz from: http://xquartz.macosforge.org/landing/ ***") message(" *****************************************************************************") set(DLIB_NO_GUI_SUPPORT ON CACHE STRING ${DLIB_NO_GUI_SUPPORT_STR} FORCE ) enable_preprocessor_switch(DLIB_NO_GUI_SUPPORT) endif() endif() mark_as_advanced(pthreadlib xlib xlib_path x11_path) else () ################################################################################## # link to the nsl library if it exists. this is something you need sometimes find_library(nsllib nsl) if (nsllib) set (dlib_needed_libraries ${dlib_needed_libraries} ${nsllib}) endif () # link to the socket library if it exists. this is something you need on solaris find_library(socketlib socket) if (socketlib) set (dlib_needed_libraries ${dlib_needed_libraries} ${socketlib}) endif () if (NOT DLIB_NO_GUI_SUPPORT) include(FindX11) if (X11_FOUND) include_directories(${X11_INCLUDE_DIR}) set (dlib_needed_libraries ${dlib_needed_libraries} ${X11_LIBRARIES}) else() message(" *****************************************************************************") message(" *** DLIB GUI SUPPORT DISABLED BECAUSE X11 DEVELOPMENT LIBRARIES NOT FOUND ***") message(" *** Make sure libx11-dev is installed if you want GUI support. ***") message(" *** On Ubuntu run: sudo apt-get install libx11-dev ***") message(" *****************************************************************************") set(DLIB_NO_GUI_SUPPORT ON CACHE STRING ${DLIB_NO_GUI_SUPPORT_STR} FORCE ) enable_preprocessor_switch(DLIB_NO_GUI_SUPPORT) endif() endif() mark_as_advanced(nsllib pthreadlib socketlib) endif () ################################################################################## if (NOT DLIB_NO_GUI_SUPPORT) set(source_files ${source_files} gui_widgets/fonts.cpp gui_widgets/widgets.cpp gui_widgets/drawable.cpp gui_widgets/canvas_drawing.cpp gui_widgets/style.cpp gui_widgets/base_widgets.cpp gui_core/gui_core_kernel_1.cpp gui_core/gui_core_kernel_2.cpp ) endif() INCLUDE (CheckFunctionExists) if (DLIB_GIF_SUPPORT) find_package(GIF QUIET) if (GIF_FOUND) set (dlib_needed_includes ${dlib_needed_includes} ${GIF_INCLUDE_DIR}) set (dlib_needed_libraries ${dlib_needed_libraries} ${GIF_LIBRARY}) else() set(DLIB_GIF_SUPPORT OFF CACHE STRING ${DLIB_GIF_SUPPORT_STR} FORCE ) toggle_preprocessor_switch(DLIB_GIF_SUPPORT) endif() endif() if (DLIB_PNG_SUPPORT) # try to find libpng find_package(PNG QUIET) # Make sure there isn't something wrong with the version of LIBPNG # installed on this system. if (PNG_FOUND) set(CMAKE_REQUIRED_LIBRARIES ${PNG_LIBRARIES}) CHECK_FUNCTION_EXISTS(png_create_read_struct LIBPNG_IS_GOOD) endif() if (PNG_FOUND AND LIBPNG_IS_GOOD) include_directories(${PNG_INCLUDE_DIR}) set (dlib_needed_libraries ${dlib_needed_libraries} ${PNG_LIBRARIES}) set(REQUIRES_LIBS " libpng") else() # If we can't find libpng then statically compile it in. include_directories(external/libpng external/zlib) set(source_files ${source_files} external/libpng/png.c external/libpng/pngerror.c external/libpng/pngget.c external/libpng/pngmem.c external/libpng/pngpread.c external/libpng/pngread.c external/libpng/pngrio.c external/libpng/pngrtran.c external/libpng/pngrutil.c external/libpng/pngset.c external/libpng/pngtrans.c external/libpng/pngwio.c external/libpng/pngwrite.c external/libpng/pngwtran.c external/libpng/pngwutil.c external/zlib/adler32.c external/zlib/compress.c external/zlib/crc32.c external/zlib/deflate.c external/zlib/gzclose.c external/zlib/gzlib.c external/zlib/gzread.c external/zlib/gzwrite.c external/zlib/infback.c external/zlib/inffast.c external/zlib/inflate.c external/zlib/inftrees.c external/zlib/trees.c external/zlib/uncompr.c external/zlib/zutil.c ) include(cmake_utils/check_if_neon_available.cmake) if (ARM_NEON_IS_AVAILABLE) message (STATUS "NEON instructions will be used for libpng.") enable_language(ASM) set(source_files ${source_files} external/libpng/arm/arm_init.c external/libpng/arm/filter_neon_intrinsics.c external/libpng/arm/filter_neon.S ) set_source_files_properties(external/libpng/arm/filter_neon.S PROPERTIES COMPILE_FLAGS "${CMAKE_ASM_FLAGS} ${CMAKE_CXX_FLAGS} -x assembler-with-cpp") endif() set(REQUIRES_LIBS "") endif() set(source_files ${source_files} image_loader/png_loader.cpp image_saver/save_png.cpp ) endif() if (DLIB_JPEG_SUPPORT) # try to find libjpeg find_package(JPEG QUIET) # Make sure there isn't something wrong with the version of libjpeg # installed on this system. Also don't use the installed libjpeg # if this is an APPLE system because apparently it's broken (as of 2015/01/01). if (JPEG_FOUND) set(CMAKE_REQUIRED_LIBRARIES ${JPEG_LIBRARY}) CHECK_FUNCTION_EXISTS(jpeg_read_header LIBJPEG_IS_GOOD) endif() if (JPEG_FOUND AND LIBJPEG_IS_GOOD AND NOT APPLE) include_directories(${JPEG_INCLUDE_DIR}) set (dlib_needed_libraries ${dlib_needed_libraries} ${JPEG_LIBRARY}) else() # If we can't find libjpeg then statically compile it in. add_definitions(-DDLIB_JPEG_STATIC) set(source_files ${source_files} external/libjpeg/jcomapi.cpp external/libjpeg/jdapimin.cpp external/libjpeg/jdapistd.cpp external/libjpeg/jdatasrc.cpp external/libjpeg/jdcoefct.cpp external/libjpeg/jdcolor.cpp external/libjpeg/jddctmgr.cpp external/libjpeg/jdhuff.cpp external/libjpeg/jdinput.cpp external/libjpeg/jdmainct.cpp external/libjpeg/jdmarker.cpp external/libjpeg/jdmaster.cpp external/libjpeg/jdmerge.cpp external/libjpeg/jdphuff.cpp external/libjpeg/jdpostct.cpp external/libjpeg/jdsample.cpp external/libjpeg/jerror.cpp external/libjpeg/jidctflt.cpp external/libjpeg/jidctfst.cpp external/libjpeg/jidctint.cpp external/libjpeg/jidctred.cpp external/libjpeg/jmemmgr.cpp external/libjpeg/jmemnobs.cpp external/libjpeg/jquant1.cpp external/libjpeg/jquant2.cpp external/libjpeg/jutils.cpp external/libjpeg/jcapimin.cpp external/libjpeg/jdatadst.cpp external/libjpeg/jcparam.cpp external/libjpeg/jcapistd.cpp external/libjpeg/jcmarker.cpp external/libjpeg/jcinit.cpp external/libjpeg/jcmaster.cpp external/libjpeg/jcdctmgr.cpp external/libjpeg/jccoefct.cpp external/libjpeg/jccolor.cpp external/libjpeg/jchuff.cpp external/libjpeg/jcmainct.cpp external/libjpeg/jcphuff.cpp external/libjpeg/jcprepct.cpp external/libjpeg/jcsample.cpp external/libjpeg/jfdctint.cpp external/libjpeg/jfdctflt.cpp external/libjpeg/jfdctfst.cpp ) endif() set(source_files ${source_files} image_loader/jpeg_loader.cpp image_saver/save_jpeg.cpp ) endif() if (DLIB_USE_BLAS OR DLIB_USE_LAPACK OR DLIB_USE_MKL_FFT) # Try to find BLAS, LAPACK and MKL include(cmake_utils/cmake_find_blas.txt) if (DLIB_USE_BLAS) if (blas_found) set (dlib_needed_libraries ${dlib_needed_libraries} ${blas_libraries}) else() set(DLIB_USE_BLAS OFF CACHE STRING ${DLIB_USE_BLAS_STR} FORCE ) toggle_preprocessor_switch(DLIB_USE_BLAS) endif() endif() if (DLIB_USE_LAPACK) if (lapack_found) set (dlib_needed_libraries ${dlib_needed_libraries} ${lapack_libraries}) else() set(DLIB_USE_LAPACK OFF CACHE STRING ${DLIB_USE_LAPACK_STR} FORCE ) toggle_preprocessor_switch(DLIB_USE_LAPACK) endif() endif() if (DLIB_USE_MKL_FFT) if (found_intel_mkl AND found_intel_mkl_headers) set (dlib_needed_includes ${dlib_needed_includes} ${mkl_include_dir}) set (dlib_needed_libraries ${dlib_needed_libraries} ${mkl_libraries}) else() set(DLIB_USE_MKL_FFT OFF CACHE STRING ${DLIB_USE_MKL_FFT_STR} FORCE ) toggle_preprocessor_switch(DLIB_USE_MKL_FFT) endif() endif() endif() if (DLIB_USE_CUDA) find_package(CUDA 7.5) if (CUDA_FOUND AND MSVC AND NOT CUDA_CUBLAS_LIBRARIES AND "${CMAKE_SIZEOF_VOID_P}" EQUAL "4") message(WARNING "You have CUDA installed, but we can't use it unless you put visual studio in 64bit mode.") set(CUDA_FOUND 0) endif() if (CUDA_FOUND AND COMPILER_CAN_DO_CPP_11) # There is some bug in cmake that causes it to mess up the # -std=c++11 option if you let it propagate it to nvcc in some # cases. So instead we disable this and manually include # things from CMAKE_CXX_FLAGS in the CUDA_NVCC_FLAGS list below. if (APPLE) set(CUDA_PROPAGATE_HOST_FLAGS OFF) # Grab all the -D flags from CMAKE_CXX_FLAGS so we can pass them # to nvcc. string(REGEX MATCHALL "-D[^ ]*" FLAGS_FOR_NVCC ${CMAKE_CXX_FLAGS}) endif() set(CUDA_HOST_COMPILATION_CPP ON) # Note that we add __STRICT_ANSI__ to avoid freaking out nvcc with gcc specific # magic in the standard C++ header files (since nvcc uses gcc headers on # linux). list(APPEND CUDA_NVCC_FLAGS "-arch=sm_30;-D__STRICT_ANSI__;-D_MWAITXINTRIN_H_INCLUDED;-D_FORCE_INLINES;${FLAGS_FOR_NVCC}") list(APPEND CUDA_NVCC_FLAGS ${active_preprocessor_switches}) if (NOT MSVC) list(APPEND CUDA_NVCC_FLAGS "-std=c++11") endif() if (CMAKE_POSITION_INDEPENDENT_CODE) # sometimes this setting isn't propagated to NVCC, which then causes the # compile to fail. So make sure it's propagated. if (NOT MSVC) # Visual studio doesn't have -fPIC so don't do it in that case. list(APPEND CUDA_NVCC_FLAGS "-Xcompiler -fPIC") endif() endif() include(cmake_utils/test_for_cudnn/find_cudnn.txt) if (cudnn AND NOT DEFINED cuda_test_compile_worked AND NOT DEFINED cudnn_test_compile_worked) # make sure cuda is really working by doing a test compile message(STATUS "Building a CUDA test project to see if your compiler is compatible with CUDA...") set(CUDA_TEST_CMAKE_FLAGS "-DCMAKE_PREFIX_PATH=${CMAKE_PREFIX_PATH}" "-DCMAKE_INCLUDE_PATH=${CMAKE_INCLUDE_PATH}" "-DCMAKE_LIBRARY_PATH=${CMAKE_LIBRARY_PATH}") if (NOT MSVC) # see https://github.com/davisking/dlib/issues/363 list(APPEND CUDA_TEST_CMAKE_FLAGS "-DCUDA_HOST_COMPILER=${CUDA_HOST_COMPILER}") endif() try_compile(cuda_test_compile_worked ${PROJECT_BINARY_DIR}/cuda_test_build ${PROJECT_SOURCE_DIR}/cmake_utils/test_for_cuda cuda_test CMAKE_FLAGS ${CUDA_TEST_CMAKE_FLAGS} ) if (NOT cuda_test_compile_worked) message(STATUS "*** CUDA was found but your compiler failed to compile a simple CUDA program so dlib isn't going to use CUDA. ***") else() message(STATUS "Checking if you have the right version of cuDNN installed.") try_compile(cudnn_test_compile_worked ${PROJECT_BINARY_DIR}/cudnn_test_build ${PROJECT_SOURCE_DIR}/cmake_utils/test_for_cudnn cudnn_test CMAKE_FLAGS ${CUDA_TEST_CMAKE_FLAGS} ) if (cudnn_test_compile_worked) message(STATUS "Found cuDNN: " ${cudnn}) else() message(STATUS "*** Found cuDNN, but it looks like the wrong version so dlib will not use it. ***") endif() endif() endif() # Find where cuSOLVER is since the FindCUDA cmake package doesn't # bother to look for it. get_filename_component(cuda_blas_path "${CUDA_CUBLAS_LIBRARIES}" DIRECTORY) find_library(cusolver cusolver HINTS ${cuda_blas_path}) mark_as_advanced(cusolver) # Also find OpenMP since cuSOLVER needs it. Importantly, we only # look for one to link to if our use of BLAS, specifically the # Intel MKL, hasn't already decided what to use. This is because # it makes the MKL bug out if you link to another openmp lib other # than Intel's when you use the MKL. if (NOT openmp_libarires AND NOT MSVC) find_package(OpenMP) if (OPENMP_FOUND) set(openmp_libarires ${OpenMP_CXX_FLAGS}) else() message(STATUS "*** Didn't find OpenMP, which is required to use CUDA. ***") set(CUDA_FOUND 0) endif() endif() endif() if (CUDA_FOUND AND cudnn AND COMPILER_CAN_DO_CPP_11 AND cuda_test_compile_worked AND cudnn_test_compile_worked AND cudnn_include) set(source_files ${source_files} dnn/cuda_dlib.cu dnn/cudnn_dlibapi.cpp dnn/cublas_dlibapi.cpp dnn/cusolver_dlibapi.cu dnn/curand_dlibapi.cpp dnn/cuda_data_ptr.cpp dnn/gpu_data.cpp ) set(dlib_needed_libraries ${dlib_needed_libraries} ${CUDA_CUBLAS_LIBRARIES} ${cudnn} ${CUDA_curand_LIBRARY} ${cusolver} ${openmp_libarires} ) include_directories(${cudnn_include}) else() set(DLIB_USE_CUDA OFF CACHE STRING ${DLIB_USE_BLAS_STR} FORCE ) toggle_preprocessor_switch(DLIB_USE_CUDA) if (COMPILER_CAN_DO_CPP_11) if (NOT cudnn OR NOT cudnn_include OR NOT cudnn_test_compile_worked) message(STATUS "*** cuDNN V5.0 OR GREATER NOT FOUND. DLIB WILL NOT USE CUDA. ***") message(STATUS "*** If you have cuDNN then set CMAKE_PREFIX_PATH to include cuDNN's folder.") endif() else () message(STATUS "*** Dlib CUDA support requires C++11 but your compiler doesn't support it. ***") endif() endif() endif() if (DLIB_LINK_WITH_SQLITE3) find_library(sqlite sqlite3) # make sure sqlite3.h is in the include path find_path(sqlite_path sqlite3.h) if (sqlite AND sqlite_path) get_filename_component(sqlite_path2 ${sqlite_path} PATH CACHE) set(dlib_needed_includes ${dlib_needed_includes} ${sqlite_path2}) set(dlib_needed_libraries ${dlib_needed_libraries} ${sqlite} ) else() set(DLIB_LINK_WITH_SQLITE3 OFF CACHE STRING ${DLIB_LINK_WITH_SQLITE3_STR} FORCE ) endif() mark_as_advanced(sqlite sqlite_path sqlite_path2) endif() if (DLIB_USE_FFTW) find_library(fftw fftw3) # make sure fftw3.h is in the include path find_path(fftw_path fftw3.h) if (fftw AND fftw_path) set(dlib_needed_includes ${dlib_needed_includes} ${fftw_path}) set(dlib_needed_libraries ${dlib_needed_libraries} ${fftw} ) else() set(DLIB_USE_FFTW OFF CACHE STRING ${DLIB_USE_FFTW_STR} FORCE ) toggle_preprocessor_switch(DLIB_USE_FFTW) endif() mark_as_advanced(fftw fftw_path) endif() # Tell CMake to build dlib via add_library()/cuda_add_library() if (DLIB_USE_CUDA) # The old cuda_add_library() command doesn't support CMake's newer dependency # stuff, so we have to set the include path manually still, which we do here. include_directories(${dlib_needed_includes}) cuda_add_library(dlib STATIC ${source_files} ) else() add_library(dlib STATIC ${source_files} ) endif() if (UNIX AND NOT DLIB_IN_PROJECT_BUILD) if (DLIB_USE_CUDA) cuda_add_library(dlib_shared SHARED ${source_files} ) add_dependencies(dlib_shared dlib) else() add_library(dlib_shared SHARED ${source_files} ) add_dependencies(dlib_shared dlib) endif() endif() endif () ##### end of if NOT DLIB_ISO_CPP_ONLY ########################################################## target_include_directories(dlib INTERFACE $ INTERFACE $ PUBLIC ${dlib_needed_includes} ) target_link_libraries(dlib PRIVATE ${dlib_needed_libraries}) if (DLIB_IN_PROJECT_BUILD) target_compile_options(dlib PUBLIC ${active_preprocessor_switches}) else() target_compile_options(dlib PRIVATE ${active_preprocessor_switches}) endif() if (UNIX AND NOT DLIB_IN_PROJECT_BUILD) target_include_directories(dlib_shared INTERFACE $ INTERFACE $ PUBLIC ${dlib_needed_includes} ) target_link_libraries(dlib_shared PRIVATE ${dlib_needed_libraries}) target_compile_options(dlib_shared PRIVATE ${active_preprocessor_switches}) endif() # Allow the unit tests to ask us to compile the all/source.cpp file just to make sure it compiles. if (DLIB_TEST_COMPILE_ALL_SOURCE_CPP) ADD_LIBRARY(dlib_all_source_cpp STATIC all/source.cpp) target_link_libraries(dlib_all_source_cpp dlib) target_compile_options(dlib_all_source_cpp PUBLIC ${active_preprocessor_switches}) endif() # Install the library if (NOT DLIB_IN_PROJECT_BUILD) cmake_minimum_required(VERSION 2.8.8) if(UNIX) set_target_properties(dlib_shared PROPERTIES OUTPUT_NAME dlib VERSION ${VERSION}) install(TARGETS dlib dlib_shared EXPORT dlib RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} # Windows (including cygwin) considers .dll to be runtime artifacts LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}) else() install(TARGETS dlib EXPORT dlib RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} # Windows considers .dll to be runtime artifacts LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}) endif() install(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/ DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/dlib FILES_MATCHING PATTERN "*.h" PATTERN "*.cmake" REGEX "${CMAKE_CURRENT_BINARY_DIR}" EXCLUDE) configure_file(${PROJECT_SOURCE_DIR}/config.h.in ${CMAKE_CURRENT_BINARY_DIR}/config.h) # overwrite config.h with the configured one install(FILES ${CMAKE_CURRENT_BINARY_DIR}/config.h DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/dlib) configure_file(${PROJECT_SOURCE_DIR}/revision.h.in ${CMAKE_CURRENT_BINARY_DIR}/revision.h) install(FILES ${CMAKE_CURRENT_BINARY_DIR}/revision.h DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/dlib) ## Config.cmake generation and installation set(ConfigPackageLocation "${CMAKE_INSTALL_LIBDIR}/cmake/dlib") install(EXPORT dlib NAMESPACE dlib:: DESTINATION ${ConfigPackageLocation}) configure_file(cmake_utils/dlibConfig.cmake.in "${CMAKE_CURRENT_BINARY_DIR}/config/dlibConfig.cmake" @ONLY) include(CMakePackageConfigHelpers) write_basic_package_version_file( "${CMAKE_CURRENT_BINARY_DIR}/config/dlibConfigVersion.cmake" VERSION ${VERSION} COMPATIBILITY AnyNewerVersion ) install(FILES "${CMAKE_CURRENT_BINARY_DIR}/config/dlibConfig.cmake" "${CMAKE_CURRENT_BINARY_DIR}/config/dlibConfigVersion.cmake" DESTINATION ${ConfigPackageLocation}) ## dlib-1.pc generation and installation configure_file("cmake_utils/dlib.pc.in" "dlib-1.pc" @ONLY) install(FILES "${CMAKE_CURRENT_BINARY_DIR}/dlib-1.pc" DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig") endif() endif() add_library(dlib::dlib ALIAS dlib)